Direct deposition and assembly of gold colloidal particles using a nanofountain probe

Patterning of Hydrophilic and Hydrophobic Gold and Magnetite Nanoparticles by Dip Pen Nanolithography

Nanoparticles offer unique physical and chemical properties. Dip pen nanolithography of nanoparticles enables versatile patterning and nanofabrication with potential application in electronics and sensing, but is not well studied yet. Herein, the patterned deposition of various nanoparticles onto unmodified silicon substrates is presented. It is shown that aqueous solutions of hydrophilic citrate and cyclodextrin functionalized gold nanoparticles as well as poly(acrylic) acid decorated magnetite nanoparticles are feasible for writing nanostructures. Both smaller and larger nanoparticles can be patterned. Hydrophobic oleylamine or n-dodecylamine capped gold nanoparticles and oleic acid decorated magnetite nanoparticles are deposited from toluene. Tip loading is carried out by dip-coating, and writing succeeds fast within 0.1 s. Also, coating with longer tip dwell times, at different relative humidity and varying frequency are studied for deposition of nanoparticle clusters. The resulting feature size is between 300 and 1780 nm as determined by scanning electron microscopy. Atomic force microscopy confirms that the heights of the deposited structures correspond to a single or double layer of nanoparticles. Higher writing speeds lead to smaller line thicknesses, offering possibilities to more complex structures. Dip pen nanolithography can hence be used to pattern nanoparticles on silicon substrates independent of the surface chemistry.

A Low-Cost Electrochemical Metal 3D Printer Based on a Microfluidic System for Printing Mesoscale Objects

For the additive manufacturing (AM) of metal objects, the powder-based fusion (PBF) method is routinely utilized to fabricate macroscale parts. On the other hand, electrochemical additive manufacturing (ECAM), in which metallic structures are deposited through the electrochemical reduction of metal ions, is a promising technique for producing micro- and nanoscale objects. However, a gap exists in terms of fabricating mesoscale objects within the current AM techniques. The PBF method is limited by fabrication precision due to pronounced residual stresses, and most current ECAM systems are difficult to scale up to print mesoscale objects. In the present paper, the novel design of a low-cost ECAM 3D printer based on a microfluidic system is proposed for fabricating mesoscale metal parts. The meniscus-guided electrodeposition approach is utilized, in which a meniscus is formed between the print head and substrate, and electrodeposition is confined within the meniscus. A 3D object is fabricated by the meniscus moving with the print head according to the programmed pattern and the material subsequently being deposited at the designated locations. The key to the proposed design is to maintain a mesoscale meniscus, which normally cannot be sustained by the electrolyte surface tension with a print nozzle having a mesoscale diameter. Therefore, a microfluidic system, called the fountain pen feed system, constituting a semi-open main channel and comb structure, was designed to maintain a mesoscale meniscus throughout the printing process. Two materials, copper and nickel, with various geometric shapes were attempted to print by the proposed ECAM system, and, during the printing process, both fluid leaking and meniscus breaking were completely prevented. Free standing tilted copper pillars with controlled angles were printed to show the ability of the proposed design in fabricating 3D structures. A copper circuit was also printed on a non-conductive substrate to demonstrate a possible application of the proposed ECAM system in the fabrication of functional electronics.

Scanning Probe-Directed Assembly and Rapid Chemical Writing Using Nanoscopic Flow of Phospholipids

Nanofluidic systems offer a huge potential for discovery of new molecular transport and chemical phenomena that can be employed for future technologies. Herein, we report on the transport behavior of surface-reactive compounds in a nanometer-scale flow of phospholipids from a scanning probe. We have investigated microscopic deposit formation on polycrystalline gold by lithographic printing and writing of 1,2-dioleoyl-sn-glycero-3-phosphocholine and eicosanethiol mixtures, with the latter compound being a model case for self-assembled monolayers (SAMs). By analyzing the ink transport rates, we found that the transfer of thiols was fully controlled by the fluid lipid matrix allowing to achieve a certain jetting regime, i.e., transport rates previously not reported in dip-pen nanolithography (DPN) studies on surface-reactive, SAM-forming molecules. Such a transport behavior deviated significantly from the so-called molecular diffusion models, and it was most obvious at the high writing speeds, close to 100 μm s^-1. Moreover, the combined data from imaging ellipsometry, scanning electron microscopy, atomic force microscopy (AFM), and spectroscopy revealed a rapid and efficient ink phase separation occurring in the AFM tip-gold contact zone. The force curve analysis indicated formation of a mixed ink meniscus behaving as a self-organizing liquid. Based on our data, it has to be considered as one of the co-acting mechanisms driving the surface reactions and self-assembly under such highly nonequilibrium, crowded environment conditions. The results of the present study significantly extend the capabilities of DPN using standard AFM instrumentation: in the writing regime, the patterning speed was already comparable to that achievable by using electron beam systems. We demonstrate that lipid flow-controlled chemical patterning process is directly applicable for rapid prototyping of solid-state devices having mesoscopic features as well as for biomolecular architectures.

Towards scanning probe lithography-based 4D nanoprinting by advancing surface chemistry, nanopatterning strategies, and characterization protocols

Biointerfaces direct some of the most complex biological events, including cell differentiation, hierarchical organization, and disease progression, or are responsible for the remarkable optical, electronic, and biological behavior of natural materials. Chemical information encoded within the 4D nanostructure of biointerfaces - comprised of the three Cartesian coordinates (x, y, z), and chemical composition of each molecule within a given volume - dominates their interfacial properties. As such, there is a strong interest in creating printing platforms that can emulate the 4D nanostructure - including both the chemical composition and architectural complexity - of biointerfaces. Current nanolithography technologies are unable to recreate 4D nanostructures with the chemical or architectural complexity of their biological counterparts because of their inability to position organic molecules in three dimensions and with sub-1 micrometer resolution. Achieving this level of control over the interfacial structure requires transformational advances in three complementary research disciplines: (1) the scope of organic reactions that can be successfully carried out on surfaces must be increased, (2) lithography tools are needed that are capable of positioning soft organic and biologically active materials with sub-1 micrometer resolution over feature diameter, feature-to-feature spacing, and height, and (3) new techniques for characterizing the 4D structure of interfaces should be developed and validated. This review will discuss recent advances in these three areas, and how their convergence is leading to a revolution in 4D nanomanufacturing.

Micrometer to 15 nm Printing of Metallic Inks with Fountain Pen Nanolithography

The field of printed electronics is continually trying to reduce the dimensions of the electrical components. Here, a method of printing metallic lines with widths as small as 15 nm and up to a few micrometers using fountain pen nanolithography (FPN) is shown. The FPN technique is based on a bent nanopipette with atomic force feedback that acts similar to a nanopen. The geometry of the nanopen allows for rapid placement accuracy of the printing tip, on any desired location, with the highest of optical sub-micrometer resolution. Using this nanopen, investigations of various inks are undertaken together with instrumental and script-tool development that allows accurate printing of multiple layers. This has led to the printing of conductive lines using inks composed of silver nanoparticles and salt solutions of silver and copper. In addition, it is shown that the method can be applied to substrates of various materials with minimal effect on the dimension of the line. The line widths are varied by using nanopens with different orifices or by tailoring the wetting properties of the ink on the substrate. Metallic interconnections of conducting lines are reported.

Review Article: Progress in fabrication of transition metal dichalcogenides heterostructure systems

Transition metal dichalcogenide (TMDC) semiconductors have attracted significant attention because of their rich electronic/photonic properties and importance for fundamental research and novel device applications. These materials provide a unique opportunity to build up high quality and atomically sharp heterostructures because of the nature of weak van der Waals interlayer interactions. The variable electronic properties of TMDCs (e.g., band gap and their alignment) provide a platform for the design of novel electronic and optoelectronic devices. The integration of TMDC heterostructures into the semiconductor industry is presently hindered by limited options in reliable production methods. Many exciting properties and device architectures which have been studied to date are, in large, based on the exfoliation methods of bulk TMDC crystals. These methods are generally more difficult to consider for large scale integration processes, and hence, continued developments of different fabrication strategies are essential for further advancements in this area. In this review, the authors highlight the recent progress in the fabrication of TMDC heterostructures. The authors will review several methods most commonly used to date for controllable heterostructure formation. One of the focuses will be on TMDC heterostructures fabricated by thermal chemical vapor deposition methods which allow for the control over the resulting materials, individual layers and heterostructures. Another focus would be on the techniques for selective growth of TMDCs. The authors will discuss conventional and unconventional fabrication methods and their advantages and drawbacks and will provide some guidance for future improvements. Mask-assisted and mask-free methods will be presented, which include traditional lithographic techniques (photo- or e-beam lithography) and some unconventional methods such as the focus ion beam and the recently developed direct-write patterning approach, which are shown to be promising for the fabrication of quality TMDC heterostructures.

Tip-Based Nanofabrication for Scalable Manufacturing

Tip-based nanofabrication (TBN) is a family of emerging nanofabrication techniques that use a nanometer scale tip to fabricate nanostructures. In this review, we first introduce the history of the TBN and the technology development. We then briefly review various TBN techniques that use different physical or chemical mechanisms to fabricate features and discuss some of the state-of-the-art techniques. Subsequently, we focus on those TBN methods that have demonstrated potential to scale up the manufacturing throughput. Finally, we discuss several research directions that are essential for making TBN a scalable nano-manufacturing technology.

Progression in the Fountain Pen Approach: From 2D Writing to 3D Free-Form Micro/Nanofabrication

The fountain pen approach, as a means for transferring materials to substrates, has shown numerous incarnations in recent years for creating 2D micro/nanopatterns and even generating 3D free-form nanostructures using a variety of material "inks". While the idea of filled reservoirs used to deliver material to a substrate via a capillary remains unchanged since antiquity, the advent of precise micromanipulation systems and functional material "inks" allows the extension of this mechanism to more high-tech applications. Herein, the recent growth in meniscus guided fountain pen approaches for benchtop micro/nanofabrication, which has occurred in the last decade, is discussed. Particular attention is given to the theory, equipment, and experimentation encompassing this unique direct writing approach. A detailed exploration of the diverse ink systems and functional device applications borne from this strategy is put forth to reveal its rapid expansion to a broad range of scientific and engineering disciplines. As such, this informative review is provided for researchers considering adoption of this recent advancement of a familiar technology.

Polymer nanocomposite patterning by dip-pen nanolithography

The ultimate aim of this study is to construct polymer nanocomposite patterns by dip-pen nanolithography (DPN). Recent investigations have revealed the effect of the amount of ink (Laplace pressure) on the mechanism of liquid ink writing. In this study it is shown that not only the amount of ink, but also physisorption and surface diffusion are relevant. After a few writing steps, physisorption and surface diffusion outweigh the influence of the amount of ink, allowing consistent patterning governed by dwell times and writing speeds. Polymer matrices can be utilized as a delivery medium to deposit functional particles. DPN patterning of polymer nanocomposites allows for local tuning of the functionality and mechanical strength of the written patterns in high resolution, with the benefit of pattern flexibility. Typically polymer matrices with volatile components are used as a delivery medium for nanoparticle deposition, with subsequent removal of loosely bound matrix material by heating or oxygen plasma. In our study, nanocomposite patterns were constructed, and the differences between polymer and nanocomposite patterning were investigated. Cross-sectional SEM and TEM analysis confirmed that nanoparticles can be deposited with the liquid-polymer ink and are evenly distributed in the polymer matrix.

Bottom-up direct writing approach for controlled fabrication of WS2/MoS2 heterostructure systems

We demonstrate a scalable production of quality WS₂/MoS₂ vertical and lateral heterostructures with controlled geometries employing a bottom-up direct writing approach.

Patterning gold nanoparticles in liquid environment with high ionic strength for local fabrication of up to 100 μm long metallic interconnections

Metallic interconnections were fabricated in situ using the FluidFM as scanning probe lithography tool. In contrast to other SPL tools, the closed fluidic circuit of the FluidFM enables a pressure-controlled deposition of metallic nanoparticles in liquid environment. Taking advantage of the salt concentration of the liquid environment (i.e. the ionic strength) to tailor the resulting particle density in the deposited layer, a protocol was established for direct patterning of conductive interconnecting structures. The FluidFM microchannel was filled with an aqueous solution of negatively charged gold nanoparticles (AuNPs) to be delivered onto a glass surface coated with a polycation favoring electrostatic adhesion. The deposited structures were analyzed both topographically and electrically to optimize the external parameters such as contact time, salt concentration of the liquid environment and size of the AuNPs. Using this optimized protocol we succeeded in the local fabrication of conductive metallic wires between two prefabricated macroelectrodes in liquid environment. In a subsequent step, the conductivity of the deposited structure was improved by gold annealing.

Direct patterning of nanoparticles and biomolecules by liquid nanodispensing

We report on the localized deposition of nanoparticles and proteins, nano-objects commonly used in many nanodevices, by the liquid nanodispensing (NADIS) technique which consists in depositing droplets of a solution through a nanochannel drilled at the apex of an AFM tip. We demonstrate that the size of spots can be adjusted from microns down to sub-50 nm by tuning the channel diameter, independently of the chemical nature of the solute. In the case of nanoparticles, we demonstrated the ultimate limit of the method and showed that large arrays of single (or pairs of) nanoparticles can be reproducibly deposited. We further explored the possibility to deposit different visible fluorescent proteins using NADIS without loss of protein function. The intrinsic fluorescence of these proteins is characteristic of their structural integrity; the retention of fluorescence after NADIS deposition demonstrates that the proteins are intact and functional. This study demonstrates that NADIS can be a viable alternative to other scanning probe lithography techniques since it combines high resolution direct writing of nanoparticles or biomolecules with the versatility of liquid lithography techniques.

Ink-on-probe hydrodynamics in atomic force microscope deposition of liquid inks

The controlled deposition of attolitre volumes of liquids may engender novel applications such as soft, nano-tailored cell-material interfaces, multi-plexed nano-arrays for high throughput screening of biomolecular interactions, and localized delivery of reagents to reactions confined at the nano-scale. Although the deposition of small organic molecules from an AFM tip, known as dip-pen nanolithography (DPN), is being continually refined, AFM deposition of liquid inks is not well understood, and is often fraught with inconsistent deposition rates. In this work, the variation in feature-size over long term printing experiments for four model inks of varying viscosity is examined. A hierarchy of recurring phenomena is uncovered and there are attributed to ink movement and reorganisation along the cantilever itself. Simple analytical approaches to model these effects, as well as a method to gauge the degree of ink loading using the cantilever resonance frequency, are described. In light of the conclusions, the various parameters which need to be controlled in order to achieve uniform printing are dicussed. This work has implications for the nanopatterning of viscous liquids and hydrogels, encompassing ink development, the design of probes and printing protocols.

Liquid ink deposition from an atomic force microscope tip: deposition monitoring and control of feature size

The controlled deposition of attoliter volumes of liquid inks may engender novel applications such as targeted drug delivery to single cells and localized delivery of chemical reagents at nanoscale dimensions. Although the deposition of small organic molecules from an atomic force microscope tip, known as dip-pen nanolithography (DPN), has been extensively studied, the deposition of liquid inks is little understood. In this work, we have used a set of model ink-substrate systems to develop an understanding of the deposition of viscous liquids using an unmodified AFM tip. First, the growth of dot size with increasing dwell time is characterized. The dynamics of deposition are found to vary for different ink-substrate systems, and the change in deposition rate over the course of an experiment limits our ability to quantify the ink-transfer dynamics in terms of liquid properties and substrate wettability. We find that the most critical parameter affecting the deposition rate is the volume of ink on the cantilever, an effect resulting in a 10-fold decrease in deposition rate (aL/s) over 2 h of printing time. We suggest that a driving force for deposition arises from the gradient in Laplace pressure set up when the tip touches the substrate. Second, the forces acting upon the AFM cantilever during ink deposition were measured in order to gain insight into the underlying ink-transfer mechanism. The force curve data and simple geometrical arguments were used to elucidate the shape of the ink meniscus at the instant of deposition, a methodology that may be used as an accurate and real-time means of monitoring the volume of deposited dots. Taken together, our results illustrate that liquid deposition involves a very different transfer mechanism than traditionally ascribed to DPN molecular transport.

Nanoscale platinum printing on insulating substrates

The deposition of noble metals on soft and/or flexible substrates is vital for several emerging applications including flexible electronics and the fabrication of soft bionic implants. In this paper, we describe a new strategy for the deposition of platinum electrodes on a range of materials, including insulators and flexible polymers. The strategy is enabled by two principle advances: (1) the introduction of a novel, low temperature strategy for reducing chloroplatinic acid to platinum using nitrogen plasma; (2) the development of a chloroplatinic acid based liquid ink formulation, utilizing ethylene glycol as both ink carrier and reducing agent, for versatile printing at nanoscale resolution using dip-pen nanolithography (DPN). The ink formulation has been printed and reduced upon Si, glass, ITO, Ge, PDMS, and Parylene C. The plasma treatment effects reduction of the precursor patterns in situ without subjecting the substrate to destructively high temperatures. Feature size is controlled via dwell time and degree of ink loading, and platinum features with 60 nm dimensions could be routinely achieved on Si. Reduction of the ink to platinum was confirmed by energy dispersive x-ray spectroscopy (EDS) elemental analysis and x-ray diffraction (XRD) measurements. Feature morphology was characterized by optical microscopy, SEM and AFM. The high electrochemical activity of individually printed Pt features was characterized using scanning electrochemical microscopy (SECM).

Nanofountain probe electroporation (NFP-E) of single cells

The ability to precisely deliver molecules into single cells is of great interest to biotechnology researchers for advancing applications in therapeutics, diagnostics, and drug delivery toward the promise of personalized medicine. The use of bulk electroporation techniques for cell transfection has increased significantly in the past decade, but the technique is nonspecific and requires high voltage, resulting in variable efficiency and low cell viability. We have developed a new tool for electroporation using nanofountain probe (NFP) technology, which can deliver molecules into cells in a manner that is highly efficient and gentler to cells than bulk electroporation or microinjection. Here we demonstrate NFP electroporation (NFP-E) of single HeLa cells within a population by transfecting them with fluorescently labeled dextran and imaging the cells to evaluate the transfection efficiency and cell viability. Our theoretical analysis of the mechanism of NFP-E reveals that application of the voltage creates a localized electric field between the NFP cantilever tip and the region of the cell membrane in contact with the tip. Therefore, NFP-E can deliver molecules to a target cell with minimal effect of the electric potential on the cell. Our experiments on HeLa cells confirm that NFP-E offers single cell selectivity, high transfection efficiency (>95%), qualitative dosage control, and very high viability (92%) of transfected cells.

FluidFM as a lithography tool in liquid: spatially controlled deposition of fluorescent nanoparticles

The atomic force microscope (AFM) is a powerful instrument for nanolithography, which is well characterized in air where the deposition process is steered by capillary action. In contrast, AFM patterning has been seldom achieved in liquid, mostly via electrochemical deposition. This study investigates the pressure-controlled local deposition of nanoparticles in a liquid environment using a FluidFM. Fluorescent 25 nm polystyrene nanospheres were chosen as nanoobjects to be dispensed because they enable both the in situ monitoring of the process by optical microscopy and the ex situ high-resolution characterization of the pattern by e.g. scanning electron microscopy. The FluidFM microchannel was filled with an aqueous solution of negatively charged nanoparticles to be delivered onto a glass surface coated with a polycation. An overpressure in the internal fluidic circuit leads to the deposition of nanoparticle dots and lines under the tip, while the force control regulates the contact between the probe and the surface. The nanoparticle adsorption process depends both on applied pressure and contact time (respectively tip velocity) and can be described using the Langmuir approximation for the random sequential adsorption model. Moreover, we observed that the force setpoint, which does not influence the capillary-driven mechanism in air, indeed affects the hydrodynamic resistance at the tip aperture and therefore the volumetric flow. The described method demonstrates the potential of FluidFM in depositing nano-sized objects in liquid with nanometre precision.

Photo-pens: a simple and versatile tool for maskless photolithography

We demonstrate conical pores etched in tracked glass chips for fabricating patterns at the micrometer scale. Highly fluorescent patterns based on photopolymerization of diacetylene films were formed by irradiating UV light through conical pores called "photo-pens". The properties of photopens were investigated through experiments, finite-difference-time-domain (FDTD) simulations and numerical calculations based on Fresnel equations. We show that the pattern dimensions are easily controlled by adjusting the exposure time. Thus, patterns with a range of dimensions can be fabricated without any need of changes in the pore diameter. Parallel patterning was also demonstrated by simultaneously exposing the films to photons through multiple pores in the chip. Our method provides an inexpensive, versatile, and efficient way for patterning without the use of sophisticated masks.

Metallophosphazene precursor routes to the solid-state deposition of metallic and dielectric microstructures and nanostructures on Si and SiO2

We present a method for the preparation and deposition of metallic microstructures and nanostructures deposited on silicon and silica surfaces by pyrolysis in air at 800 degrees C of the corresponding metallophosphazene (cyclic or polymer). Atomic force microscopy studies reveal that the morphology is dependent on the polymeric or oligomeric nature of the phosphazene precursor, on the preparation method used, and on the silicon substrate surface (crystalline or amorphous) and its prior inductively couple plasma etching treatment. Microscale and nanoscale structures and high-surface-area thin films of gold, palladium, silver, and tin were successfully deposited from their respective newly synthesized precursors. The characteristic morphology of the deposited nanostructures resulted in varied roughness and increased surface area and was observed to be dependent on the precursor and the metal center. In contrast to island formation from noble metal precursors, we also report a coral of SnP(2)O(7) growth on Si and SiO(2) surfaces from the respective Sn polymer precursor, leaving a self-affine fractal structure with a well-defined roughness exponent that appears to be independent (within experimental error) of the average size of the islands. The nature of the precursor will be shown to influence the degree of surface features, and the mechanism of their formation is presented. The method reported here constitutes a new route to the deposition of single-crystal metallic, oxidic, and phosphate nanostructures and thin films on technologically relevant substrates.

Nanofountain-probe-based high-resolution patterning and single-cell injection of functionalized nanodiamonds

Nanodiamonds are rapidly emerging as promising carriers for next-generation therapeutics and drug delivery. However, developing future nanoscale devices and arrays that harness these nanoparticles will require unrealized spatial control. Furthermore, single-cell in vitro transfection methods lack an instrument that simultaneously offers the advantages of having nanoscale dimensions and control and continuous delivery via microfluidic components. To address this, two modes of controlled delivery of functionalized diamond nanoparticles are demonstrated using a broadly applicable nanofountain probe, a tool for direct-write nanopatterning with sub-100-nm resolution and direct in vitro single-cell injection. This study demonstrates the versatility of the nanofountain probe as a tool for high-fidelity delivery of functionalized nanodiamonds and other agents in nanomanufacturing and single-cell biological studies. These initial demonstrations of controlled delivery open the door to future studies examining the nanofountain probe's potential in delivering specific doses of DNA, viruses, and other therapeutically relevant biomolecules.

Dip-pen-nanolithographic patterning of metallic, semiconductor, and metal oxide nanostructures on surfaces

Dip-pen nanolithography (DPN) is a powerful method to pattern nanostructures on surfaces by the controlled delivery of an "ink" coating the tip of an atomic force microscope upon scanning and contacting with surfaces. The growing interest in the use of nanoparticles as structural and functional elements for the fabrication of nanodevices suggests that the DPN-stimulated patterning of nanoparticles on surfaces might be a useful technique to assemble hierarchical architectures of nanoparticles that could pave methodologies for functional nanocircuits or nanodevices. This Review presents different methodologies for the nanolithographic patterning of metallic, semiconductor, and metal oxide nanostructures on surfaces. The mechanisms involved in the formation of the nanostructures are discussed and the effects that control the dimensions of the resulting patterns are reviewed. The possible applications of the nanostructures are also addressed.

Electric field-induced direct delivery of proteins by a nanofountain probe

We report nanofabrication of protein dot and line patterns using a nanofountain atomic force microscopy probe (NFP). Biomolecules are continuously fed in solution through an integrated microfluidic system, and deposited directly onto a substrate. Deposition is controlled by application of an electric potential of appropriate sign and magnitude between the probe reservoir and substrate. Submicron dot and line molecular patterns were generated with resolution that depended on the magnitude of the applied voltage, dwell time, and writing speed. By using an energetic argument and a Kelvin condensation model, the quasi-equilibrium liquid-air interface at the probe tip was determined. The analysis revealed the origin of the need for electric fields in achieving protein transport to the substrate and confirmed experimental observations suggesting that pattern resolution is controlled by tip sharpness and not overall probe aperture. As such, the NFP combines the high-resolution of dip-pen nanolithography with the efficient continuous liquid feeding of micropipettes while allowing scalability to 1- and 2D probe arrays for high throughput.

Direct patterning of gold nanoparticles using dip-pen nanolithography

Various methods for the patterned assembly of metal nanoparticles have been developed in order to harness their unique electrical and optical properties for device applications. This paper discusses a method for direct writing of Au nanoparticles at nanoscale resolution using dip-pen nanolithography. First, a procedure was developed for increasing the loading of Au nanoparticles onto AFM tips to prolong patterning life. AFM tips were subsequently imaged by scanning electron microscopy to determine ink coverage and to gain insight into the deposition process. Next, surface interactions, relative humidity, and writing speed were controlled to determine an optimal range of conditions for deposition. Various ink-substrate combinations were studied to elucidate the dependence of deposition on interactions between Au nanoparticles and the substrate surface; inks consisted of positively and negatively charged particles, and substrates were SiO(2) surfaces modified as hydrophilic or hydrophobic and interacted electrostatically or covalently with Au nanoparticles. Results indicate that a highly hydrophilic surface is required for Au nanoparticle deposition, unless covalent binding can occur between the Au and substrate surface. The optimal range of relative humidity for patterning was found to be 40-60%, and Au nanoparticle deposition was not sensitive to writing speeds ranging from 0.01 to 2 microm/s.

Selective surface patterning for the coadsorption of self-assembled gold and semiconductor nanoparticles

The predetermined patterned adsorption of two types of nanoparticles on the same substrate may be of considerable importance in various applications, among others, to enhance the absorption of semiconductor nanoparticles by the plasmonic effect of metal NPs. We describe here a simple method for self-assembling 2D lateral patterns in which both gold and semiconductor nanoparticles are adsorbed, each in a predesigned area. Our method is based on a one-step lithographic process and the adsorption of two distinct self-assembled monolayers that can selectively bind only one type of nanoparticle.