Polysugar-stabilized Pd nanoparticles exhibiting high catalytic activities for hydrodechlorination of environmentally deleterious trichloroethylene

Cellulose-based materials in environmental protection: A scientometric and visual analysis review

As sustainable materials, cellulose-based materials have attracted significant attention in the field of environmental protection, resulting in the publication of numerous academic papers. However, there is a scarcity of literature that involving scientometric analysis within this specific domain. This review aims to address this gap and highlight recent research in this field by utilizing scientometric analysis and a historical review. As a result, 21 highly cited articles and 10 mostly productive journals were selected out. The scientometric analysis reveals that recent studies were objectively clustered into five interconnected main themes: extraction of cellulose from raw materials and its degradation, adsorption of pollutants using cellulose-based materials, cellulose-acetate-based membrane materials, nanocellulose-based materials, and other cellulose-based materials such as carboxymethyl cellulose and bacterial cellulose for environmental protection. Analyzing the distribution of author keywords and thoroughly examining relevant literature, the research focuses within these five themes were summarized. In the future, the development of eco-friendly and cost-effective methods for extracting and preparing cellulose and its derivatives, particularly nanocellulose-based materials, remains an enduring pursuit. Additionally, machine learning techniques holds promise for the advancement and application of cellulose-based materials. Furthermore, there is potential to expand the research and application scope of cellulose-based materials for environmental protection.

Energy transfer mechanism of carboxymethyl chitosan-Eu3+/Tb3+ complex materials and application in multicolor LED

Biological macromolecules had been studied as ligands in recent years, which not only give the complexes excellent polymer properties, but also have many advantages such as biodegradability. Carboxymethyl chitosan (CMCh) is excellent biological macromolecular ligand because of its abundant active amino and carboxyl groups, and it can smoothly transfer energy to Ln³⁺ after coordinating. To further study the energy transfer mechanism of CMCh-Ln³⁺ complexes, CMCh-Eu³⁺/Tb³⁺ complexes with different Eu³⁺/Tb³⁺ ratios were prepared by using CMCh as a ligand. The morphology, structure, and properties of CMCh-Eu³⁺/Tb³⁺ were characterized and analyzed by infrared spectroscopy, XPS, TG and Judd-Ofelt theory, thus the chemical structure of CMCh-Eu³⁺/Tb³⁺ was determined. The mechanism of energy transfer was explained in detail, also the Förster resonance transfer model is confirmed, and the hypothesis of energy transfer back was verified by the characterization and calculation methods of fluorescence spectra, UV spectra, phosphorescence spectra and fluorescence lifetime. Finally, CMCh-Eu³⁺/Tb³⁺ with different molar ratios were used to prepare a series of multicolor LED lamps, and it extends the application range of biological macromolecules as ligands.

Remediation of soil contaminated with PAHs and γ-HCH using Fenton oxidation activated by carboxymethyl cellulose-modified iron oxide-biochar

The remediation of soil contaminated with hydrophobic organic pollutants has attracted great public concern. In the present study, a novel catalyst using biochar supported ferro ferric oxide modified by carboxymethyl cellulose (CMC-Fe₃O₄/BC) was developed to activate the Fenton reaction for hazardous hydrophobic organic pollutants, and the degradation mechanisms were analyzed in terms of free radicals, electron transfer pathways and degradation intermediates. The results showed that the CMC-Fe₃O₄/BC-activated H₂O₂ system degraded nearly 100% of pyrene in the aqueous system after a 1440-min reaction. The catalyst was also applied to remediate industrial field soil contaminated with PAHs and γ-HCH. The removal rate of the total pollutants reached 61.1% after a 10-day reaction, which was higher than that of Fe₃O₄/BC without modification. CMC enabled the Fe₃O₄ particles to more equably distribute on the BC surface, further effectively activating H₂O₂ to generate more ⋅OH and forming different degradation products compared to the Fe₃O₄/BC. Additionally, the CMC-Fe₃O₄/BC-activated H₂O₂ system obviously enhanced electron transfer on the BC surface. Thus, the PAHs and γ-HCH could be degraded via electron transfer pathways.

Carboxymethyl cellulose nanocolloids anchored Pd(0) nanoparticles (CMC@Pd NPs): synthesis, characterization, and catalytic application in transfer hydrogenation

Herein, we report on the preparation of novel colloidal system based on carboxymethyl cellulose (CMC) and Pd nanoparticles (CMC@Pd NPs) via an ecofriendly auto-reduction process under mild conditions. In the first step, the follow-up of reduction and preparation of CMC anchored palladium nanoparticles (Pd NPs) in aqueous solution was carried out using UV-Vis spectroscopy. Thereafter, the monodispersed colloids were fully characterized by advanced analytical, structural, and morphological techniques. Based on Scherrer equation, the as-synthesized CMC@Pd NPs crystallite size was about 10.88 nm. Accordingly, the detailed microscopic study revealed CMC nanocolloids anchored uniform distribution of Pd NPs and the presence of CMC nanofilm as protective monolayer. To the best of our knowledge, the observed nanoscale properties are reported for the first time for CMC-M system. The performance of the as-synthesized CMC@Pd nanocolloids was first investigated in the reduction of 4-nitrophenol, as a model substrate, to 4-aminophenol using NaBH4 as a hydrogen source. Moreover, the catalytic reduction of various nitroarenes bearing electron withdrawing or donating substituents was carried out and monitored by UV-Vis spectroscopy. The chemo- and regioselectivity of the catalytic reduction in presence of CMC@Pd NPs were also studied. Consequently, the prepared CMC@Pd nanocolloids exhibit remarkable activity, good heterogeneity, and higher reusability and stability for the catalytic reduction reaction under mild conditions.

Wood-Sourced Polymers as Support for Catalysis by Group 10 Transition Metals

Despite providing interesting solutions to reduce the number of synthetic steps, to decrease energy consumption or to generate less waste, therefore contributing to a more sustainable way of producing important chemicals, the expansion of the use of homogeneous catalysis in industrial processes is hampered by several drawbacks. One of the most important is the difficulty to recycle the noble metals generating potential high costs and pollution of the synthesized products by metal traces detrimental to their applications. Supporting the metals on abundant and cheap biosourced polymers has recently appeared as an almost ideal solution: They are much easier to recover from the reaction medium and usually maintain high catalytic activity. The present bibliographical review focuses on the development of catalysts based on group 10 transition metals (nickel, palladium, platinum) supported on biopolymers obtained from wood, such as cellulose, hemicellulose, lignin, and their derivatives. The applications of these catalysts in organic synthesis or depollution are also addressed in this review with examples of C-C couplings, oxidation, or hydrogenation reactions.

Pd Nanoparticles-Loaded Vinyl Polymer Gels: Preparation, Structure and Catalysis

Four vinyl polymer gels (VPGs) were synthesized by free radical polymerization of divinylbenzene, ethane-1,2-diyl dimethacrylate, and copolymerization of divinylbenzene with styrene, and ethane-1,2-diyl dimethacrylate with methyl methacrylate, as supports for palladium nanoparticles. VPGs obtained from divinylbenzene and from divinylbenzene with styrene had spherical shapes while those obtained from ethane-1,2-diyl dimethacrylate and from ethane-1,2-diyl dimethacrylate with methyl methacrylate did not have any specific shapes. Pd(OAc)2 was impregnated onto VPGs and reduced to form Pd0 nanoparticles within VPGs. The structures of Pd0-loaded VPGs were analyzed by XRD, TEM, and nitrogen gas adsorption. Pd0-loaded VPGs had nanocrystals of Pd0 within and on the surface of the polymeric supports. Pd0/VPGs efficiently catalyzed the oxidation/disproportionation of benzyl alcohol into benzaldehyde/toluene, where activity and selectivity between benzaldehyde and toluene varied, depending on the structure of VPG and the weight percentage loading of Pd0. The catalysts were stable and Pd leaching to liquid phase did not occur. The catalysts were separated and reused for five times without any significant decrease in the catalytic activity.

Preparation and catalytic properties of poly(methyl methacrylate)-supported Pd0 obtained from room-temperature, dark reduction of ionic aggregates of the unstable Pd2+ solution ionomer

A poly(methyl methacrylate)-supported Pd⁰ nanocatalyst was successfully prepared from solution reaction of Pd(CH₃COO)₂ with a copolymer acid, poly(methyl methacrylate-ran-methacrylic acid) (MMA–MAA). The reaction was carried out in a benzene/methanol mixed solvent in the dark at room temperature (∼25 °C) in the absence of a typical chemical reductant. There was coordination between the Pd⁰ nanoclusters and MMA–MAA, resulting in Pd⁰ nanoclusters being stably and uniformly dispersed in the MMA–MAA matrix, with an average particle size of ∼2.5 ± 0.5 nm. Mechanistically, it can tentatively be proposed that PMMA-ionomerization of the Pd²⁺ ions produces intramolecular –2COO⁻–Pd²⁺ aggregate cross-links in the solution. On swelling of the chain-segments that are covalently bound via multiple C–C bonds, the resultant elastic forces cause instantaneous dissociation at the O–Pd coordination bonds to give transient bare (i.e., uncoordinated), highly-oxidative Pd²⁺ ions and H⁺-associative carboxylate groups, both of which rapidly scavenge electrons and protons, respectively, of the active α-H atoms abstracted from the methanol molecules of the solvent to make Pd⁰ nanoclusters supported by the re-formed MMA–MAA. The MMA–MAA acid copolymer, without itself undergoing any permanent chemical change, serves as a mechanical activator or catalyst for the mechanochemical reduction of Pd(CH₃COO)₂ under mild conditions. Compared with traditional Pd/C catalysts, this Pd⁰ nanocatalyst exhibited more excellent catalytic efficiency and reusability in the Heck reaction between iodobenzene and styrene, and it could be easily separated. The supported Pd⁰ nanocatalyst prepared using this novel and simple preparation method may display high-efficiency catalytic properties for other cross coupling reactions.

A polymer-supported Pd⁰ nanocatalyst is prepared by using mechanochemical reduction as the driving force for the reaction.

Enhanced removal of As (V) from aqueous solution using modified hydrous ferric oxide nanoparticles

Hydrous ferric oxide (HFO) is most effective with high treatment capacity on arsenate [As(V)] sorption although its transformation and aggregation nature need further improvement. Here, HFO nanoparticles with carboxymethyl cellulose (CMC) or starch as modifier was synthesized for the purpose of stability improvement and As(V) removal from water. Comparatively, CMC might be the optimum stabilizer for HFO nanoparticles because of more effective physical and chemical stability. The large-pore structure, high surface specific area, and the non-aggregated nature of CMC-HFO lead to increased adsorption sites, and thus high adsorption capacities of As(V) without pre-treatment (355 mg·g-1), which is much greater than those reported in previous studies. Second-order equation and dual-mode isotherm model could be successfully used to interpret the sorption kinetics and isotherms of As(V), respectively. FTIR, XPS and XRD analyses suggested that precipitation and surface complexation were primary mechanisms for As(V) removal by CMC modified HFO nanoparticles. A surface complexation model (SCM) was used to simulate As adsorption over pH 2.5-10.4. The predominant adsorbed arsenate species were modeled as bidentate binuclear surface complexes at low pH and as monodentate complexes at high pH. The immobilized arsenic remained stable when aging for 270 d at room temperature.

Aggregation and stabilization of multiwalled carbon nanotubes in aqueous suspensions: influences of carboxymethyl cellulose, starch and humic acid

Aggregation and stability of multiwalled carbon nanotubes in aqueous solutions were investigated with two polysaccharide stabilizers (carboxymethyl cellulose and a water soluble starch) and a natural organic matter (leonardite humic acid).

Rapid, one-pot procedure to synthesise103Pd:Pd@Au nanoparticles en route for radiosensitisation and radiotherapeutic applications

Radioactive gold–palladium nanoparticles for radiotherapy.

Preparation of biocompatible magnetite-carboxymethyl cellulose nanocomposite: characterization of nanocomposite by FTIR, XRD, FESEM and TEM

The preparation and characterization of magnetite-carboxymethyl cellulose nano-composite (M-CMC) material is described. Magnetite nano-particles were synthesized by a modified co-precipitation method using ferrous chloride tetrahydrate and ferric chloride hexahydrate in ammonium hydroxide solution. The M-CMC nano-composite particles were synthesized by embedding the magnetite nanoparticles inside carboxymethyl cellulose (CMC) using a freshly prepared mixture of Fe3O4 with CMC precursor. Morphology, particle size, and structural properties of magnetite-carboxymethyl cellulose nano-composite was accomplished using X-ray powder diffraction (XRD), transmission electron microscopy (TEM), Fourier transformed infrared (FTIR) and field emission scanning electron microscopy (FESEM) analysis. As a result, magnetite nano-particles with an average size of 35nm were obtained. The biocompatible Fe3O4-carboxymethyl cellulose nano-composite particles obtained from the natural CMC polymers have a potential range of application in biomedical field.

General synthesis of noble metal (Au, Ag, Pd, Pt) nanocrystal modified MoS2 nanosheets and the enhanced catalytic activity of Pd-MoS2 for methanol oxidation

A general and facile method for water-dispersed noble metal (Au, Ag, Pd, Pt) nanocrystal modified MoS2 nanosheets (NM-MoS2 NSs) has been developed. By using sodium carboxymethyl cellulose as a stabilizer, well-dispersed NM-MoS2 NSs with homogeneously deposited noble metal nanocrystals (NM NCs) can be synthesized in aqueous solutions. Due to the transition from the semiconducting 2H phase to the metallic 1T phase, the chemically exfoliated MoS2 (ce-MoS2) NSs have improved electrochemical activity. The partially metallic nature of the ce-MoS2 NSs and the catalytic activity of the NM NCs synergistically make NM-MoS2 NSs a potential electrochemical catalyst. For the first time, Pd-MoS2 NSs were used as an electrocatalyst for methanol oxidation in alkaline media. The results showed that Pd-MoS2 NSs have enhanced catalytic activity with 2.8-fold anodic peak current mass density compared to a commercial Pd/C catalyst, suggesting potential for application in direct methanol fuel cells (DMFCs).

Catalytic hydrodechlorination of trichloroethylene in water with supported CMC-stabilized palladium nanoparticles

In this work, we developed and tested a new class of supported Pd catalysts by immobilizing CMC (carboxymethyl cellulose) stabilized Pd nanoparticles onto alumina support. The alumina supported Pd nanoparticles were able to facilitate rapid and complete hydrodechlorination of TCE (trichloroethylene) without intermediate by-products detected. With a Pd mass loading of 0.33 wt% of the alumina mass, the observed pseudo first order reaction rate constant, k(obs), for the catalyst was increased from 28 to 109 L/min/g when CMC concentration was raised from 0.005 to 0.15 wt%. The activity increase was in accord with an increase of the Pd dispersion (measured via CO chemisorption) from 30.4% to 45.1%. Compared to the commercial alumina supported Pd, which has a lower Pd dispersion of 21%, our CMC-stabilized Pd nanoparticles offered more than 7 times greater activity. Pre-calcination treatment of the supported catalyst resulted in minor drop in activity, yet greatly reduced bleeding (<6%) of the Pd nanoparticles from the support during multiple cycles of applications. The presence of DOM (dissolved organic matter) at up to 10 mg/L as TOC had negligible effect on the catalytic activity. The alumina supported CMC-stabilized Pd nanoparticles may serve as a class of more effective catalysts for water treatment uses.

Green synthesis of silver nanoparticles using 4-acetamido-TEMPO-oxidized curdlan

A facile, simple, and eco-friendly method using 4-acetamido-2,2,6,6-tetramethypiperidine-1-oxyl radical-oxidized curdlan (Oc) as both reducing and stabilizing agents was developed for the fabrication of silver nanoparticles (AgNPs) from silver nitrate (AgNO₃). The structure, morphology, and particle size of the as-prepared AgNPs were investigated by ultraviolet-visible spectroscopy, transmission electron microscopy, energy dispersive X-ray spectrometry, X-ray diffraction, and dynamic laser light scattering. The well-dispersed AgNPs were sphere like with a mean diameter of 15 nm. Their formation was dependent on reaction duration, reaction temperature, Oc concentration, and AgNO₃ concentration. Fourier transform-infrared and Raman spectra demonstrated that the as-prepared AgNPs can readily bind covalently with the carboxylate groups of Oc through the strong monodentate interaction in the reaction medium.

Synthesis and characterization of supported polysugar-stabilized palladium nanoparticle catalysts for enhanced hydrodechlorination of trichloroethylene

Palladium (Pd) nanoparticle catalysts were successfully synthesized within an aqueous phase using sodium carboxymethyl cellulose (CMC) as a capping ligand which offers a green alternative to conventional nanoparticle synthesis techniques. The CMC-stabilized Pd nanoparticles were subsequently dispersed within support materials using the incipient wetness impregnation technique for utilization in heterogeneous catalyst systems. The unsupported and supported (both calcined and uncalcined) Pd nanoparticle catalysts were characterized using transmission electron microscopy, energy dispersive x-ray spectrometry, x-ray diffraction, and Brunauer-Emmett-Teller surface area measurement and their catalytic activity toward the hydrodechlorination of trichloroethylene (TCE) in aqueous media was examined using homogeneous and heterogeneous catalyst systems, respectively. The unsupported Pd nanoparticles showed considerable activity toward the degradation of TCE, as demonstrated by the reaction kinetics. Although the supported Pd nanoparticle catalysts had a lower catalytic activity than the unsupported particles that were homogeneously dispersed in the aqueous solutions, the supported catalysts retained sufficient activity toward the degradation of TCE. In addition, the use of the hydrophilic Al(2)O(3) support material induced a mass transfer resistance to TCE that affected the initial hydrodechlorination rate. This paper demonstrates that supported Pd catalysts can be applied to the heterogeneous catalytic hydrodechlorination of TCE.

Iron-Based Nanoparticles for Toxic Organic Degradation: Silica Platform and Green Synthesis

Iron and iron oxide nanoparticles (NPs) are finding wide applications for the remediation of various toxic chloro-organic compounds (such as trichloroethylene, TCE), via reductive and oxidative processes. In this study, Fe NPs (30-50 nm) are synthesized by reduction from ferric ions immobilized (by ion exchange) on a platform (two types of sulfonated silica particles), in order to prevent the NP agglomeration. Next, the Fe NPs are oxidized and their effectiveness for the oxidative dechlorination of TCE via the heterogeneous decomposition of hydrogen peroxide to OH• on the surface of the iron oxide NPs was demonstrated. For the reductive approach, the use of ascorbic acid as a "green" reducing agent in conjunction with a secondary metal (Pd) inhibits NP oxidation and agglomeration through surface adsorbed species. The Fe/Pd NPs have been successfully applied for the dechlorination of TCE (k(SA), surface-area normalized reaction rate, = 8.1 ×10(-4) L/m(2)h).

Development of polymeric palladium-nanoparticle membrane-installed microflow devices and their application in hydrodehalogenation

We have developed a variety of polymeric palladium-nanoparticle membrane-installed microflow devices. Three types of polymers were convoluted with palladium salts under laminar flow conditions in a microflow reactor to form polymeric palladium membranes at the laminar flow interface. These membranes were reduced with aqueous sodium formate or heat to create microflow devices that contain polymeric palladium-nanoparticle membranes. These microflow devices achieved instantaneous hydrodehalogenation of aryl chlorides, bromides, iodides, and triflates by 10-1000 ppm within a residence time of 2-8 s at 50-90 °C by using safe, nonexplosive, aqueous sodium formate to quantitatively afford the corresponding hydrodehalogenated products. Polychlorinated biphenyl (10-1000 ppm) and polybrominated biphenyl (1000 ppm) were completely decomposed under similar conditions, yielding biphenyl as a fungicidal compound.

Controllable aggregation and reversible pH sensitivity of AuNPs regulated by carboxymethyl cellulose

A pH-sensitive gold nanoparticle-cysteamine/carboxymethyl cellulose (Au-CA/CMC) dispersion system was prepared by a simple approach. Gold nanoparticles (AuNPs) were first synthesized by directly reducing chloroauric acid (HAuCl(4)) with sodium carboxymethyl cellulose (CMC). Then the AuNPs were decorated by an electrostatic compound of cysteamine hydrochloride (CA) and sodium carboxymethyl cellulose (CMC) through ligand exchange to get the assembly of Au-CA/CMC. The Au-CA/CMC dispersion system exhibits strongly reversible pH-responsive behavior with the aggregation of AuNPs caused by the combined action of the chain conformation change of CMC and electrostatic interactions between CA and CMC at different pH values. Finally, the reversible aggregation mechanism of AuNPs in the Au-CA/CMC dispersion system has been investigated by transmission electron microscopy (TEM) and ultraviolet-visible spectroscopy (UV-vis spectroscopy). This study provides a new method to fabricate a stimuli-responsive system free from complicated organic synthesis without using a toxic reducing agent.

Microreactor of Pd nanoparticles immobilized hollow microspheres for catalytic hydrodechlorination of chlorophenols in water

A microreactor of Pd nanoparticles immobilized shell-corona hollow microspheres of poly[styrene-co-2-(acetoacetoxy) ethyl methacrylate-co-acrylamide] has been designed for catalytic hydrodechlorination (HDC) of chlorophenols in the sole solvent of water. The strategy of the combined use of the shell-corona hollow microspheres as microcapsule and catalyst scaffold endues the microreactor several advantages. First, the microreactor can be dispersed in the sole solvent of water and acts as a quasi-homogeneous catalyst for catalytic HDC of chlorophenols. Second, the reactant of chlorophenols can be highly concentrated within the hollow microspheres of the microreactor in the sole solvent of water. Third, the resultant product of phenol can be favorably excreted off the microreactor into water because of the polar difference between the reactant of chlorophenols and the product of phenol. Ascribed to the combined advantages, catalytic HDC of chlorophenols can be performed efficiently within the microreactor in the sole solvent of water at room temperature under atmosphere pressure.