Langmuir monolayer of artificial pulmonary surfactant mixtures with an amphiphilic peptide at the air/water interface: comparison of new preparations with surfacten (Surfactant TA)

Effect of cationic dendrimer on membrane mimetic systems in the form of monolayer and bilayer

Interactions between a zwitterionic phospholipid, 1, 2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC) and four anionic phospholipids dihexadecyl phosphate (DHP), 1, 2-dimyristoyl-sn-glycero-3-phosphoglycerol (DMPG), 1, 2-dipalmitoyl-sn-glycero-3-phosphate (DPP) and 1, 2-dipalmitoyl-sn-glycero-3-phospho ethanol (DPPEth) in combination with an additional amount of 30 mol% cholesterol were separately investigated at air-buffer interface through surface pressure (π) - area (A) measurements. π-A isotherm derived parameters revealed maximum negative deviation from ideality for the mixtures comprising 30 mol% anionic lipids. Besides the film functionality, structural changes of the monomolecular films at different surface pressures in the absence and presence of polyamidoamine (PAMAM, generation 4), a cationic dendrimer, were visualised through Brewster angle microscopy and fluorescence microscopic studies. Fluidity/rigidity of monolayers were assessed by surface dilatational rheology studies. Effect of PAMAM on the formation of adsorbed monolayer, due to bilayer disintegration of liposomes (DPPC:anionic lipids= 7:3 M/M, and 30 mol% cholesterol) were monitored by surface pressure (π) - time (t) isotherms. Bilayer disintegration kinetics were dependent on lipid head group and chain length, besides dendrimer concentration. Such studies are considered to be an in vitro cell membrane model where the alteration of molecular orientation play important roles in understanding the nature of interaction between the dendrimer and cell membrane. Liposome-dendrimer aggregates were nontoxic to breast cancer cell line as well as in doxorubicin treated MDA-MB-468 cell line suggesting their potential as drug delivery systems.

Stimuli-Responsive Langmuir Films Composed of Nanoparticles Decorated with Poly(N-isopropyl acrylamide) (PNIPAM) at the Air/Water Interface

The nanotechnology shift from static toward stimuli-responsive systems is gaining momentum. We study adaptive and responsive Langmuir films at the air/water interface to facilitate the creation of two-dimensional (2D) complex systems. We verify the possibility of controlling the assembly of relatively large entities, i.e., nanoparticles with diameter around 90 nm, by inducing conformational changes within an about 5 nm poly(N-isopropyl acrylamide) (PNIPAM) capping layer. The system performs reversible switching between uniform and nonuniform states. The densely packed and uniform state is observed at a higher temperature, i.e., opposite to most phase transitions, where more ordered phases appear at lower temperatures. The induced nanoparticles' conformational changes result in different properties of the interfacial monolayer, including various types of aggregation. The analysis of surface pressure at different temperatures and upon temperature changes, surface potential measurements, surface rheology experiments, Brewster angle microscopy (BAM), and scanning electron microscopy (SEM) observations are accompanied by calculations to discuss the principles of the nanoparticles' self-assembly. Those findings provide guidelines for designing other adaptive 2D systems, such as programable membranes or optical interfacial devices.

Influence of InP/ZnS Quantum Dots on Thermodynamic Properties and Morphology of the DPPC/DPPG Monolayers at Different Temperatures

In this work, the effects of InP/ZnS quantum dots modified with amino or carboxyl group on the characteristic parameters in phase behavior, elastic modulus, relaxation time of the DPPC/DPPG mixed monolayers are studied by the Langmuir technology at the temperature of 37, 40 and 45 °C. Additionally, the information on the morphology and height of monolayers are obtained by the Langmuir-Bloggett technique and atomic force microscope technique. The results suggest that the modification of the groups can reduce the compressibility of monolayers at a higher temperature, and the most significant effect is the role of the amino group. At a high temperature of 45 °C, the penetration ability of InP/ZnS-NH₂ quantum dots in the LC phase of the mixed monolayer is stronger. At 37 °C and 40 °C, there is no clear difference between the penetration ability of InP/ZnS-NH₂ quantum dots and InP/ZnS-COOH quantum dots. The InP/ZnS-NH₂ quantum dots can prolong the recombination of monolayers at 45 °C and accelerate it at 37 °C and 40 °C either in the LE phase or in the LC phase. However, the InP/ZnS-COOH quantum dots can accelerate it in the LE phase at all temperatures involved but only prolong it at 45 °C in the LC phase. This work provides support for understanding the effects of InP/ZnS nanoparticles on the structure and properties of cell membranes, which is useful for understanding the behavior about the ingestion of nanoparticles by cells and the cause of toxicity.

Effects of Carboxyl or Amino Group Modified InP/ZnS Nanoparticles Toward Simulated Lung Surfactant Membrane

Quantum dots (QDs) as a promising optical probe have been widely used for in vivo biomedical imaging; especially enormous efforts recently have focused on the potential toxicity of QDs to the human body. The toxicological effects of the representative InP/ZnS QDs as a cadmium-free emitter are still in the early stage and have not been fully unveiled. In this study, the DPPC/DPPG mixed monolayer was used to simulate the lung surfactant monolayer. The InP/ZnS-COOH QDs and InP/ZnS-NH₂ QDs were introduced to simulate the lung surfactant membrane's environment in the presence of InP/ZnS QDs. The effects of InP/ZnS QDs on the surface behavior, elastic modulus, and stability of DPPC/DPPG mixed monolayer were explored by the surface pressure-mean molecular area isotherms and surface pressure-time curves. The images observed by Brewster angle microscope and atomic force microscope showed that the InP/ZnS QDs affected the morphology of the monolayer. The results further demonstrated that the InP/ZnS QDs coated with different surface groups can obviously adjust the mean molecular area, elastic modulus, stability, and microstructure of DPPC/DPPG mixed monolayer. Overall, this work provided useful information for in-depth understanding of the effects of the -COOH or -NH₂ group coated InP/ZnS QDs on the surface of lung surfactant membrane, which will help scientists to further study the physiological toxicity of InP/ZnS QDs to lung health.

Establishment of a Synthetic In Vitro Lung Surfactant Model for Particle Interaction Studies on a Langmuir Film Balance

With the intention to provide a robust and economical model that can be used for predicting particle interactions with the pulmonary surfactant, this study was aimed to find an artificial surfactant model that perfectly mimics the properties of the natural pulmonary surfactant. A surfactant model should be reproducible, robust, and able to predict interactions between the pulmonary surfactant and exogenous influences from air and the aqueous site. We compared three synthetic models with the natural bovine surfactant Alveofact. The lung conditions were simulated by spreading the surfactants at the air/aqueous interface on a Langmuir trough with movable barriers. All three artificial surfactant models showed properties very similar to that of Alveofact. Visualization of the monolayers by atomic force microscopy revealed very similar structures with domain formation. The Tanaka lipid mixture has already shown good results in vitro and in vivo in previous studies. The 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC)-1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) model has large conformations in the surface pressure isotherms and showed a biomimetic exclusion plateau, indicative of an effective lung surfactant formulation. Also, the equilibrium spreading pressure was similar. DPPC-1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-1'-rac-glycerol (POPG) had the greatest similarities with Alveofact in the hysteresis areas. The kinetic constants of the relaxation experiments during desorption showed that the PCPG model (at 30 mN/m) had almost identical diffusion and dissolution values as Alveofact. As a proof of concept, the interaction of the models with PLGA nanoparticles showed promising results in all experiments for all the three surfactant models. The results show that the choice of components in a model play a crucial role in obtaining reproducible results. The selected models can be used for further studies as synthetic in vitro lung models.

Comparison of Tanaka lipid mixture with natural surfactant Alveofact to study nanoparticle interactions on Langmuir film balance

Upon inhalation, nanoparticles enter the lungs where the pulmonary surfactant forms the first point of contact and plays a pivotal role for the subsequent absorption into the body. This can lead to interactions that alter the biophysical function of the surfactant monolayer. Therefore, a reliable prediction of the interaction is desired. In this study, we compared the behaviour of an artificial surfactant model with that of a natural surfactant upon exposure to chitosan nanoparticles. To simulate the physiology of the lungs, the surfactant monolayers were placed at an air/aqueous interface of a Langmuir film balance. Based on the data obtained from the experiments, the chitosan nanoparticles first integrated into the monolayer of the natural surfactant and then interact strongly with its compounds thereby moving out of the monolayer. The topographic changes in the monolayer were determined by atomic force microscopy analysis. Using this technique, the nanoparticle localisation on the monolayer could be studied. No visible interaction was observed with the artificial surfactant from surface pressure-time isotherms and atomic force microscopy analysis. Incomplete miscibility lead to instability of the artificial surfactant which left behind a DPPC rich monolayer after nanoparticle interaction. It was not stable enough to see a possible interaction (i.e. change in surface pressure) with the nanoparticles directly. These results should help understand the interactions of lipids among themselves and with the nanoparticles. Furthermore, it should help generate an efficient artificial surfactant model and to understand the underlying mechanisms of the nanoparticle interaction with the monolayer.

Photodegradable coumarin-derived amphiphilic dendrons for DNA binding: Self-assembly and phototriggered disassembly in water and air-water interface

In this article, we demonstrate the self-assembly and photoresponive behavior of a novel coumarin-based amphiphilic dendron in both aqueous solution and air-water interface. The dendritic structure, namely C-IG₁, was composed of a lipophilic cholesterol and hydrophilic poly(amido amine) (PAMAM) dendron, and the amphiphilic counterpart is interconnected by a photolabile coumarin carbonate ester, enabling the photoinduced degradation of the amphiphiles in protic solvents via S_N1-like mechanism. A Nile red solubilization fluorescence assay suggests a low critical aggregation concentration for the micelle formation of C-IG₁ in aqueous solutions (3.9 × 10^-5 M); the Langmuir analysis further indicates that C-IG₁ possesses significant compressibility in air-water interface, eventually forming homogeneous monolayers with a final molecular area (A₀) of 36 Ų. Notably, the micelles and Langmuir monolayer are quite stable until photo-triggered dissociation based on the photocleavage of C-IG₁ amphiphile activated by 365-nm incident light. Moreover, the transition in interfacial morphology of the Langmuir monolayer during the assembly and photodegradation processes also can be visually analyzed by incorporating Nile red probes with in situ monitoring through fluorescence microscopy. The thin film deposited on a glass substrate by the Langmuir-Blodgett technique also shows a photoresponsive behavior based on the change in the contact angles of a water droplet on the surface upon light stimulation. The binding affinity of C-IG₁ and cyclic DNA determined by the fluorescence quenching analysis of the coumarin reporter suggests a ground-state macromolecular complexation process occurring through polyvalent interactions between the pseudodendrimers and biomacromolecules. The ethidium bromide displacement assay further indicates thus dendriplex formation at low nitrogen-to-phosphorous value (N/P < 1) and confirms that the decomplexation accompanied by DNA release can be achieved through an active phototriggered route under spatiotemporal control.

Effects of Aggregate Charge and Subphase Ionic Strength on the Properties of Spread Polyelectrolyte/Surfactant Films at the Air/Water Interface under Static and Dynamic Conditions

We demonstrate the ability to tune the formation of extended structures in films of poly(sodium styrenesulfonate)/dodecyltrimethylammonium bromide at the air/water interface through control over the charge/structure of aggregates as well as the ionic strength of the subphase. Our methodology to prepare loaded polyelectrolyte/surfactant films from self-assembled liquid crystalline aggregates exploits their fast dissociation and Marangoni spreading of material upon contact with an aqueous subphase. This process is proposed as a potential new route to prepare cheap biocompatible films for transfer applications. We show that films spread on water from swollen aggregates of low/negative charge have 1:1 charge binding and can be compressed only to a monolayer, beyond which material is lost to the bulk. For films spread on water from compact aggregates of positive charge, however, extended structures of the two components are created upon spreading or upon compression of the film beyond a monolayer. The application of ellipsometry, Brewster angle microscopy, and neutron reflectometry as well as measurements of surface pressure isotherms allow us to reason that formation of extended structures is activated by aggregates embedded in the film. The situation upon spreading on 0.1 M NaCl is different as there is a high concentration of small ions that stabilize loops of the polyelectrolyte upon film compression, yet extended structures of both components are only transient. Analogy of the controlled formation of extended structures in fluid monolayers is made to reservoir dynamics in lung surfactant. The work opens up the possibility to control such film dynamics in related systems through the rational design of particles in the future.

Phase-separated surfactant monolayers: Exploiting immiscibility of fluorocarbons and hydrocarbons to pattern interfaces

The mutual immiscibility of hydrogenated and fluorinated surfactants at interfaces frequently leads to phase-separation, which provides a useful and flexible method for patterning air-water and solid-air interfaces. In this article, we review recent advances in the use of hydrogenated-fluorinated surfactant mixtures to achieve interfacial patterning. For even relatively simple systems comprised of binary mixed monolayers of hydrogenated and perfluorinated fatty acids, a diverse range of film morphologies can be generated at the air-water interface and successfully transferred onto solid substrates. Systematic investigations reported over the past several years have allowed for correlation between the chemical structure of the film constituents with the gross film morphology and underlying crystalline structure of the films. Early thermodynamic models based on the interplay between dipole-dipole repulsion forces between charged headgroups balanced by line tension between phases that were formulated to describe phase-behavior in simple phospholipid monolayer systems have proven highly useful to describe morphologies for the immiscible surfactant blends. Beyond simple binary fatty acid mixtures, highly-structured films have also been reported in mixed phospholipid systems, which have found important application in controlling the physical, compositional and performance properties of lung surfactant mixtures, as well as in semifluorinated alkane monolayers which form unique, hemimicellar structures at both liquid and solid interfaces. We also describe advances in using these approaches to pattern photopolymerizable, luminescent surfactants, which have found extensive use in colorimetric and fluorometric sensing devices. The long-term outlook for this field, with an emphasis on potential applications and future research directions are discussed.

Interactions of a Tetrazine Derivative with Biomembrane Constituents: A Langmuir Monolayer Study

Tetrazine (Tz) is expected to be used for bioimaging and as an analytical reagent. It is known to react very fast with trans-cyclooctene under water in organic chemistry. Here, to understand the interaction between Tz and biomembrane constituents, we first investigated the interfacial behavior of a newly synthesized Tz derivative comprising a C18-saturated hydrocarbon chain (rTz-C18) using a Langmuir monolayer spread at the air-water interface. Surface pressure (π)-molecular area (A) and surface potential (ΔV)-A isotherms were measured for monolayers of rTz-C18 and biomembrane constituents such as dipalmitoylphosphatidylcholine (DPPC), dipalmitoylphosphatidylglycerol (DPPG), dipalmitoyl phosphatidylethanolamine (DPPE), palmitoyl sphingomyelin (PSM), and cholesterol (Ch). The lateral interaction between rTz-C18 and the lipids was thermodynamically elucidated from the excess Gibbs free energy of mixing and two-dimensional phase diagram. The binary monolayers except for the Ch system indicated high miscibility or affinity. In particular, rTz-C18 was found to interact more strongly with DPPE, which is a major constituent of the inner surface of cell membranes. The phase behavior and morphology upon monolayer compression were investigated by using Brewster angle microscopy (BAM), fluorescence microscopy (FM), and atomic force microscopy (AFM). The BAM and FM images of the DPPC/rTz-C18, DPPG/rTz-C18, and PSM/rTz-C18 systems exhibited a coexistence state of two different liquid-condensed domains derived mainly from monolayers of phospholipids and phospholipids-rTz-C18. From these morphological observations, it is worthy to note that rTz-C18 is possible to interact with a limited amount of the lipids except for DPPE.

Effects of cardiolipin on membrane morphology: a Langmuir monolayer study

Cardiolipin (CL) is a complex phospholipid that is specifically found in mitochondria. Owing to the association of the CL levels with mitochondrial physiopathology such as in Parkinson's disease, we study the molecular effect of CL on membrane organization using model Langmuir monolayer, fluorescence microscopy, and x-ray reflectivity. We find that the liquid-expanded phase in membranes increases with increasing CL concentration, indicating an increase in the elasticity of the mixed membrane. The Gibbs excess free energy of mixing indicates that the binary monolayer composed of CL and DPPC is most thermodynamically stable at ΦCL = 10 mol%, and the stability is enhanced when the surface pressure is increased. Additionally, when ΦCL is small, the expansion of the membrane with increasing CL content was slower at higher surface pressure. These abnormal results are indicative of a folding structure being present before a collapsing structure, which was confirmed by using fluorescence microscopy and was characterized by using x-ray reflectivity with the electron density profile along the membrane's surface normal.

Overcoming inactivation of the lung surfactant by serum proteins: a potential role for fluorocarbons?

In many pulmonary conditions serum proteins interfere with the normal adsorption of components of the lung surfactant to the surface of the alveoli, resulting in lung surfactant inactivation, with potentially serious untoward consequences. Here, we review the strategies that have recently been designed in order to counteract the biophysical mechanisms of inactivation of the surfactant. One approach includes protein analogues or peptides that mimic the native proteins responsible for innate resistance to inactivation. Another perspective uses water-soluble additives, such as electrolytes and hydrophilic polymers that are prone to enhance adsorption of phospholipids. An alternative, more recent approach consists of using fluorocarbons, that is, highly hydrophobic inert compounds that were investigated for partial liquid ventilation, that modify interfacial properties and can act as carriers of exogenous lung surfactant. The latter approach that allows fluidisation of phospholipid monolayers while maintaining capacity to reach near-zero surface tension definitely warrants further investigation.

Tuning Morphologies of Langmuir Polymer Films Through Controlled Relaxations of Non-Equilibrium States

Langmuir polymers films (LPFs) frequently form nonequilibrium states which are manifested in a decay of the surface pressure with time when the system is allowed to relax. Monitoring and manipulating the temporal evolution of these relaxations experimentally helps to shed light on the associated molecular reorganization processes. We present a systematic study based on different compression protocols and show how these reorganization processes impact the morphology of LPFs of poly(γ-benzyl-L-glutamate)(PBLG), visualized by means of atomic force microscopy. Upon continuous compression, a fibrillar morphology was formed with a surface decorated by squeezed-out islands. By contrast, stepwise compression promoted the formation of a fibrillar network with a bimodal distribution of fibril diameters, caused by merging of fibrils. Finally, isobaric compression induced in-plane compaction of the monolayer. We correlate these morphological observations with the kinetics of the corresponding relaxations, described best by a sum of two exponential functions with different time scales representing two molecular processes. We discuss the observed kinetics and the resulting morphologies in the context of nucleation and growth, characteristic for first-order phase transitions. Our results demonstrate that the preparation conditions of LPFs have tremendous impact on ordering of the molecules and hence various macroscopic properties of such films.

Interfacial behavior of pulmonary surfactant preparations containing egg yolk lecithin

Mammalian lungs are covered with lipid-protein complexes or pulmonary surfactants. In this work, which aimed towards the less expensive production of artificial pulmonary surfactants, we produced surfactants composed of egg yolk lecithin (eggPC), palmitic acid, and hexadecanol (= 0.30/0.35/0.35, mol/mol/mol ) containing different amounts of Hel 13-5 (NH2-KLLKLLLKLWLKLLKLLL-COOH) as a substitute for the proteins in native pulmonary surfactants. Surface pressure (π)-molecular area (A) and surface potential (DV)-A isotherms of the mixtures were measured via the Wilhelmy and ionizing (241)Am electrode methods, respectively. The interactions between the lipid components and Hel 13-5 led to variations in the surface pressure caused by the expulsion of fluid components from the surface. Furthermore, the π-A and DV-A isotherms featured large hysteresis loops for the surfactant that contained a small amount of Hel 13-5 during compression and successive expansion cycling. To elucidate the morphology, the phase behavior was visualized in situ at the air-water interface by means of fluorescence microscopy; the images suggested less effective interactions between Hel 13-5 and the unsaturated PC in eggPC despite the similarity of their monolayer properties.

Improvement of pulmonary surfactant activity by introducing D-amino acids into highly hydrophobic amphiphilic α-peptide Hel 13-5

The high costs of artificial pulmonary surfactants, ranging in hundreds per kilogram of body weight, used for treating the respiratory distress syndrome (RDS) premature babies have limited their applications. We have extensively studied soy lecithins and higher alcohols as lipid alternatives to expensive phospholipids such as DPPC and PG. As a substitute for the proteins, we have synthesized the peptide Hel 13-5D3 by introducing D-amino acids into a highly lipid-soluble, basic amphiphilic peptide, Hel 13-5, composed of 18 amino acid residues. Analysis of the surfactant activities of lipid-amphiphilic artificial peptide mixtures using lung-irrigated rat models revealed that a mixture (Murosurf SLPD3) of dehydrogenated soy lecithin, fractionated soy lecithin, palmitic acid (PA), and peptide Hel 13-5D3 (40:40:17.5:2.5, by weight) superior pulmonary surfactant activity than a commercially available pulmonary surfactant (beractant, Surfacten®). Experiments using ovalbumin-sensitized model animals revealed that the lipid-amphiphilic artificial peptide mixtures provided significant control over an increase in the pulmonary resistance induced by premature allergy reaction and reduced the number of acidocytes and neutrophils in lung-irrigated solution. The newly developed low-cost pulmonary surfactant system may be used for treatment of a wide variety of respiratory diseases.

Comparison between the behavior of different hydrophobic peptides allowing membrane anchoring of proteins

Membrane binding of proteins such as short chain dehydrogenase reductases or tail-anchored proteins relies on their N- and/or C-terminal hydrophobic transmembrane segment. In this review, we propose guidelines to characterize such hydrophobic peptide segments using spectroscopic and biophysical measurements. The secondary structure content of the C-terminal peptides of retinol dehydrogenase 8, RGS9-1 anchor protein, lecithin retinol acyl transferase, and of the N-terminal peptide of retinol dehydrogenase 11 has been deduced by prediction tools from their primary sequence as well as by using infrared or circular dichroism analyses. Depending on the solvent and the solubilization method, significant structural differences were observed, often involving α-helices. The helical structure of these peptides was found to be consistent with their presumed membrane binding. Langmuir monolayers have been used as membrane models to study lipid-peptide interactions. The values of maximum insertion pressure obtained for all peptides using a monolayer of 1,2-dioleoyl-sn-glycero-3-phospho-ethanolamine (DOPE) are larger than the estimated lateral pressure of membranes, thus suggesting that they bind membranes. Polarization modulation infrared reflection absorption spectroscopy has been used to determine the structure and orientation of these peptides in the absence and in the presence of a DOPE monolayer. This lipid induced an increase or a decrease in the organization of the peptide secondary structure. Further measurements are necessary using other lipids to better understand the membrane interactions of these peptides.

Reconstitution of membrane proteins into model membranes: seeking better ways to retain protein activities

The function of any given biological membrane is determined largely by the specific set of integral membrane proteins embedded in it, and the peripheral membrane proteins attached to the membrane surface. The activity of these proteins, in turn, can be modulated by the phospholipid composition of the membrane. The reconstitution of membrane proteins into a model membrane allows investigation of individual features and activities of a given cell membrane component. However, the activity of membrane proteins is often difficult to sustain following reconstitution, since the composition of the model phospholipid bilayer differs from that of the native cell membrane. This review will discuss the reconstitution of membrane protein activities in four different types of model membrane - monolayers, supported lipid bilayers, liposomes and nanodiscs, comparing their advantages in membrane protein reconstitution. Variation in the surrounding model environments for these four different types of membrane layer can affect the three-dimensional structure of reconstituted proteins and may possibly lead to loss of the proteins activity. We also discuss examples where the same membrane proteins have been successfully reconstituted into two or more model membrane systems with comparison of the observed activity in each system. Understanding of the behavioral changes for proteins in model membrane systems after membrane reconstitution is often a prerequisite to protein research. It is essential to find better solutions for retaining membrane protein activities for measurement and characterization in vitro.

Pulmonary surfactant suppressed phenanthrene adsorption on carbon nanotubes through solubilization and competition as examined by passive dosing technique

Adsorption of phenanthrene on carbon nanotubes (CNTs) was examined in the presence of pulmonary surfactant (Curosurf) and its main components, dipalmitoyl phosphatidylcholine (DPPC) and bovine serum albumin (BSA). A passive-dosing method based on equilibrium partitioning from a preloaded polymer was successfully employed to measure phenanthrene binding and speciation at controlled freely dissolved concentrations while avoiding phase separation steps. Curosurf, DPPC, and BSA could all linearly solubilize phenanthrene, and phenanthrene solubilization by Curosurf was 4 times higher than individual components (DPPC or BSA). In the presence of Curosurf, DPPC or BSA, adsorption of phenanthrene by multiwalled CNTs (MWCNTs) was suppressed, showing competitive adsorption between pulmonary surfactant (or DPPC, BSA) and phenanthrene. Competitive adsorption between Curosurf and phenanthrene was the strongest. Therefore, when phenanthrene-adsorbed CNTs enter the respiratory tract, phenanthrene can be desorbed due to both solubilization and competition. The bioaccessibility of phenanthrene adsorbed on three MWCNTs in the respiratory tract would be positively related to the size of their outer diameters. Moreover, the contribution of solubilization and competition to desorption of phenanthrene from MWCNTs was successfully separated for the first time. These findings demonstrate the two mechanisms on how pulmonary surfactants can enhance desorption and thus possibly biological absorption of phenanthrene adsorbed on CNTs.

Waveguide evanescent field fluorescence microscopy: high contrast imaging of a domain forming mixed lipid Langmuir-Blodgett monolayer mimicking lung surfactant

Waveguide evanescent field fluorescence (WEFF) microscopy is a new development that allows the imaging of contact regions between biological cells and their substratum, as well as imaging of ultrathin films such as monomolecular Langmuir-Blodgett (LB) films. Mixed-lipid monolayer systems mimicking lung surfactant were fabricated on waveguides using the LB technique and imaged by both WEFF and standard wide field epi-fluorescence microscopy. These two technologies were compared with respect to contrast, photobleaching, and sensitivity. It was found that WEFF microscopy produced images with a much higher contrast, lower photobleaching, and higher sensitivity. In addition, fine structures in the lipidic domains were observed for the first time.

Fluorocarbon-hybrid pulmonary surfactants for replacement therapy--a Langmuir monolayer study

Effective additives to pulmonary surfactant (PS) preparations for therapy of respiratory distress syndrome (RDS) are being intensively sought. We report here the investigation of the effects of partially fluorinated amphiphiles (PFA) on the surface behavior of a model PS formulation. When small amounts of a partially fluorinated alcohol C(8)F(17)C(m)H(2m)OH (F8HmOH, m = 5 and 11) are added to the PS model preparation (a dipalmitoylphosphatidylcholine (DPPC)/Hel 13-5 peptide mixture) considered here, the effectiveness of the latter in in vitro pulmonary functions is enhanced. The mechanism for the improved efficacy depends on the hydrophobic chain length of the added PFA molecules. The shorter PFA, F8H5OH, when incorporated in the monolayer of the PS model preparation, promotes a disordered liquid-expanded (LE) phase upon lateral compression (fluidization). In contrast, the addition of the longer PFA, F8H11OH, reduces the disordered LE/ordered liquid-condensed (LC) phase transition pressure and promotes the growth of ordered domains (solidification). Furthermore, compression-expansion cycles suggest that F8H5OH, when incorporated in the PS model preparation, undergoes an irreversible elimination into the subphase, whereas F8H11OH enhances the squeeze-out phenomenon of the SP-B mimicking peptide, which is important in pulmonary functions and is related to the formation of a solid-like monolayer at the surface and of a surface reservoir just below the surface. F8H11OH particularly reinforces the effectiveness of DPPC in terms of minimum reachable surface tension, and of preservation of the integrated hysteresis area between compression and expansion isotherms, the two latter parameters being generally accepted indices for assessing PS efficacy. We suggest that PFA amphiphiles may be useful potential additives for synthetic PS preparations destined for treatment of RDS in premature infants and in adults.

Dynamic properties of cationic diacyl-glycerol-arginine-based surfactant/phospholipid mixtures at the air/water interface

In this Article, we study the binary surface interactions of 1,2-dimyristoyl-rac-glycero-3-O-(N(alpha)-acetyl-L-arginine) hydrochloride (1414RAc) with 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC) on 0.1 M sodium chloride solutions. 1414RAc is a novel monocationic surfactant that has potential applications as an antimicrobial agent, is biodegradable, and shows a toxicity activity smaller than that of other commercial cationic surfactants. DPPC phospholipid was used as a model membrane component. The dynamic surface tension of 1414RAc/DPPC aqueous dispersions injected into the saline subphase was followed by tensiometry. The layer formation for the mixtures is always accelerated with respect to DPPC, and surprisingly, the surface tension reduction is faster and reaches lower surface tension values at surfactant concentration below its critical micellar concentration (cmc). Interfacial dilational rheology properties of mixed films spread on the air/water interface were determined by the dynamic oscillation method using a Langmuir trough. The effect of surfactant mole fraction on the rheological parameters of 1414RAc/DPPC mixed monolayers was studied at a relative amplitude of area deformation of 5% and a frequency of 50 mHz. The monolayer viscoelasticity shows a nonideal mixing behavior with predominance of the surfactant properties. This nonideal behavior has been attributed to the prevalence of electrostatic interactions.

Miscibility behavior of two-component monolayers at the air-water interface: perfluorocarboxylic acids and DMPE

Surface pressure (pi)-molecular area (A) and surface potential (DeltaV)-A isotherms have been measured for two-component monolayers of four different perfluorocarboxylic acids [FCn; perfluorododecanoic acid (FC12), perfluorotetradecanoic acid (FC14), perfluorohexadecanoic acid (FC16), and perfluorooctadecanoic acid (FC18)] and dimyristoylphosphatidylethanolamine (DMPE) on 0.15M NaCl (pH 2) at 298.2K. The present study is focused on the miscibility and the interfacial behavior for the binary DMPE/FCn monolayers upon compression. From the isotherms, the miscibility has been elucidated in terms of the additivity rule, the interaction parameter, and the interaction energy. The interaction parameter (or energy) is compared with that for the previous dipalmitoylphosphatidylcholine (DPPC)/FCn systems [Colloids Surf. B 41 (2005) 285-298] to understand the effect of phospholipids' polar headgroup on the binary miscibility. Furthermore, the phase behavior of the DMPE/FCn systems has been morphologically examined using fluorescence microscopy (FM) and atomic force microscopy (AFM). These images reveal the different interaction modes among the four systems; DMPE can be miscible with FC12 and FC14 and immiscible with FC16 and FC18 in the monolayer state. These systematic examinations indicate that the miscibility of perfluorocarboxylic acids and phospholipids depends on combination of hydrocarbon and fluorocarbon chain lengths and on phospholipids' polar headgroups within a monolayer.

Langmur monolayers of cerebroside with different head groups originated from sea cucumber: binary systems with dipalmitoylphosphatidylcholine (DPPC)

Surface properties (Langmuir monolayer) of two different cerebrosides which are extracted from the sea cucumber (Bohadschia argus) were investigated. A main difference in chemical structure of cerebroside between BAC-2a and BAC-4 is their head groups (glucose and galactose, respectively). Furthermore, miscibility and interaction between dipalmitoylphosphatidylcholine (DPPC) and cerebrosides (BAC-2a and BAC-4) in the monolayer have been systematically examined. The surface pressure (pi)-area (A), the surface potential (Delta V)-A, and the dipole moment (mu(perpendicular))-A isotherms for monolayers of DPPC, cerebrosides, and their binary combinations have been measured using the Wilhelmy method and the ionizing electrode method. BAC-4 forms a stable liquid-expanded (LE) monolayer, whereas BAC-2a has a first-order phase transition from the LE phase to the liquid-condensed (LC) state on 0.15 M NaCl at 298.2 K. The fundamental properties for each cerebroside monolayer were elucidated in terms of the surface dipole moment based on the three-layer model [R.J. Demchak, T. Fort Jr., J. Colloid Interface Sci. 46 (1974) 191-202] for both cerebrosides and the apparent molar quantity change (Delta s(gamma), Delta h(gamma), and Delta u(gamma)) for BAC-2a. In addition, their miscibility with DPPC was examined by the variation of the molecular areas and the surface potentials as a function of cerebroside mole fractions, the additivity rule. The miscibility was also confirmed by constructing the two-dimensional phase diagrams. The phase diagrams for the both binary systems were of negative azeotropic type. That is, the two-component DPPC/BAC-2a and DPPC/BAC-4 monolayers are miscible. Furthermore, the Joos equation for the analysis of the collapse pressure of binary monolayers allowed calculation of the interaction parameter and the interaction energy between the DPPC and cerebroside monolayers. The miscibility in the monolayer state was also confirmed by the morphological observation with Brewster angle microscopy (BAM), fluorescence microscopy (FM), and atomic force microscopy (AFM).

Pulmonary surfactant model systems catch the specific interaction of an amphiphilic peptide with anionic phospholipid

Interfacial behavior was studied in pulmonary surfactant model systems containing an amphiphilic alpha-helical peptide (Hel 13-5), which consists of 13 hydrophobic and five hydrophilic amino acid residues. Fully saturated phospholipids of dipalmitoylphosphatidylcholine (DPPC) and dipalmitoylphosphatidylglycerol (DPPG) were utilized to understand specific interactions between anionic DPPG and cationic Hel 13-5 for pulmonary functions. Surface pressure (pi)-molecular area (A) and surface potential (DeltaV)-A isotherms of DPPG/Hel 13-5 and DPPC/DPPG (4:1, mol/mol)/Hel 13-5 preparations were measured to obtain basic information on the phase behavior under compression and expansion processes. The interaction leads to a variation in squeeze-out surface pressures against a mole fraction of Hel 13-5, where Hel 13-5 is eliminated from the surface on compression. The phase behavior was visualized by means of Brewster angle microscopy, fluorescence microscopy, and atomic force microscopy. At low surface pressures, the formation of differently ordered domains in size and shape is induced by electrostatic interactions. The domains independently grow upon compression to high surface pressures, especially in the DPPG/Hel 13-5 system. Under the further compression process, protrusion masses are formed in AFM images in the vicinity of squeeze-out pressures. The protrusion masses, which are attributed to the squeezed-out Hel 13-5, grow larger in lateral size with increasing DPPG content in phospholipid compositions. During subsequent expansion up to 35 mN m(-1), the protrusions retain their height and lateral diameter for the DPPG/Hel 13-5 system, whereas the protrusions become smaller for the DPPC/Hel 13-5 and DPPC/DPPG/Hel 13-5 systems due to a reentrance of the ejected Hel 13-5 into the surface. In this work we detected for the first time, to our knowledge, a remarkably large hysteresis loop for cyclic DeltaV-A isotherms of the binary DPPG/Hel 13-5 preparation. This exciting phenomenon suggests that the specific interaction triggers two completely independent processes for Hel 13-5 during repeated compression and expansion: 1), squeezing-out into the subsolution; and 2), and close packing as a monolayer with DPPG at the interface. These characteristic processes are also strongly supported by atomic force microscopy observations. The data presented here provide complementary information on the mechanism and importance of the specific interaction between the phosphatidylglycerol headgroup and the polarized moiety of native surfactant protein B for biophysical functions of pulmonary surfactants.