Rapid activation of the melibiose permease MelB immobilized on a solid-supported membrane

Investigation of sugar binding kinetics of the E. coli sugar/H+ symporter XylE using solid supported membrane-based electrophysiology

Bacterial transporters are difficult to study using conventional electrophysiology because of their low transport rates and the small size of bacterial cells. Here, we applied solid-supported membrane–based electrophysiology to derive kinetic parameters of sugar translocation by the Escherichia coli xylose permease (XylE), including functionally relevant mutants. Many aspects of the fucose permease (FucP) and lactose permease (LacY) have also been investigated, which allow for more comprehensive conclusions regarding the mechanism of sugar translocation by transporters of the major facilitator superfamily. In all three of these symporters, we observed sugar binding and transport in real time to determine K_M, V_max, K_D, and k_obs values for different sugar substrates. K_D and k_obs values were attainable because of a conserved sugar-induced electrogenic conformational transition within these transporters. We also analyzed interactions between the residues in the available X-ray sugar/H⁺ symporter structures obtained with different bound sugars. We found that different sugars induce different conformational states, possibly correlating with different charge displacements in the electrophysiological assay upon sugar binding. Finally, we found that mutations in XylE altered the kinetics of glucose binding and transport, as Q175 and L297 are necessary for uncoupling H⁺ and d-glucose translocation. Based on the rates for the electrogenic conformational transition upon sugar binding (>300 s⁻¹) and for sugar translocation (2 s⁻¹ − 30 s⁻¹ for different substrates), we propose a multiple-step mechanism and postulate an energy profile for sugar translocation. We also suggest a mechanism by which d-glucose can act as an inhibitor for XylE.

Complete cysteine-scanning mutagenesis of the Salmonella typhimurium melibiose permease

The melibiose permease of Salmonella typhimurium (MelB_St) catalyzes the stoichiometric symport of galactopyranoside with a cation (H⁺, Li⁺, or Na⁺) and is a prototype for Na⁺-coupled major facilitator superfamily (MFS) transporters presenting from bacteria to mammals. X-ray crystal structures of MelB_St have revealed the molecular recognition mechanism for sugar binding; however, understanding of the cation site and symport mechanism is still vague. To further investigate the transport mechanism and conformational dynamics of MelB_St, we generated a complete single-Cys library containing 476 unique mutants by placing a Cys at each position on a functional Cys-less background. Surprisingly, 105 mutants (22%) exhibit poor transport activities (<15% of Cys-less transport), although the expression levels of most mutants were comparable to that of the control. The affected positions are distributed throughout the protein. Helices I and X and transmembrane residues Asp and Tyr are most affected by cysteine replacement, while helix IX, the cytoplasmic middle-loop, and C-terminal tail are least affected. Single-Cys replacements at the major sugar-binding positions (K18, D19, D124, W128, R149, and W342) or at positions important for cation binding (D55, N58, D59, and T121) abolished the Na⁺-coupled active transport, as expected. We mapped 50 loss-of-function mutants outside of these substrate-binding sites that suffered from defects in protein expression/stability or conformational dynamics. This complete Cys-scanning mutagenesis study indicates that MelB_St is highly susceptible to single-Cys mutations, and this library will be a useful tool for further structural and functional studies to gain insights into the cation-coupled symport mechanism for Na⁺-coupled MFS transporters.

X-ray crystallography reveals molecular recognition mechanism for sugar binding in a melibiose transporter MelB

Major facilitator superfamily_2 transporters are widely found from bacteria to mammals. The melibiose transporter MelB, which catalyzes melibiose symport with either Na⁺, Li⁺, or H⁺, is a prototype of the Na⁺-coupled MFS transporters, but its sugar recognition mechanism has been a long-unsolved puzzle. Two high-resolution X-ray crystal structures of a Salmonella typhimurium MelB mutant with a bound ligand, either nitrophenyl-α-d-galactoside or dodecyl-β-d-melibioside, were refined to a resolution of 3.05 or 3.15 Å, respectively. In the substrate-binding site, the interaction of both galactosyl moieties on the two ligands with MelB_St are virturally same, so the sugar specificity determinant pocket can be recognized, and hence the molecular recognition mechanism for sugar binding in MelB has been deciphered. The conserved cation-binding pocket is also proposed, which directly connects to the sugar specificity pocket. These key structural findings have laid a solid foundation for our understanding of the cooperative binding and symport mechanisms in Na⁺-coupled MFS transporters, including eukaryotic transporters such as MFSD2A.

Guan and Hariharan report two crystal structures of melibiose transporter MelB in complex with substrate analogs, nitrophenyl-galactoside, and dodecyl-melibioside. Both structures revealed similar specific site for sugar recognition and resolved the cation-binding pocket, advancing the understanding of MelB and related transporters.

Asp22 drives the protonation state of the Staphylococcus epidermidis glucose/H+ symporter

The Staphylococcus epidermidis glucose/H⁺ symporter (GlcP_Se) is a membrane transporter highly specific for glucose and a homolog of the human glucose transporters (GLUT, SLC2 family). Most GLUTs and their bacterial counterparts differ in the transport mechanism, adopting uniport and sugar/H⁺ symport, respectively. Unlike other bacterial GLUT homologs (for example, XylE), GlcP_Se has a loose H⁺/sugar coupling. Asp²² is part of the proton-binding site of GlcP_Se and crucial for the glucose/H⁺ co-transport mechanism. To determine how pH variations affect the proton site and the transporter, we performed surface-enhanced IR absorption spectroscopy on the immobilized GlcP_Se We found that Asp²² has a pK_a of 8.5 ± 0.1, a value consistent with that determined previously for glucose transport, confirming the central role of this residue for the transport mechanism of GlcP_Se A neutral replacement of the negatively charged Asp²² led to positive charge displacements over the entire pH range, suggesting that the polarity change of the WT reflects the protonation state of Asp²² We expected that the substitution of the residue Ile¹⁰⁵ for a serine, located within hydrogen-bonding distance to Asp²², would change the microenvironment, but the pK_a of Asp²² corresponded to that of the WT. A167E mutation, selected in analogy to the XylE, introduced an additional protonatable site and perturbed the protonation state of Asp²², with the latter now exhibiting a pK_a of 6.4. These studies confirm that Asp²² is the proton-binding residue in GlcP_Se and show that charged residues in its vicinity affect the pK_a of glucose/H⁺ symport.

Functional Characterization of SLC Transporters Using Solid Supported Membranes

Here, we present a protocol for the functional characterization of the H⁺-coupled human peptide transporter PepT1 and sufficient notes to transfer the protocol to the Na⁺-coupled sugar transporter SGLT1, the organic cation transporter OCT2, the Na⁺/Ca²⁺ exchanger NCX, and the neuronal glutamate transporter EAAT3.The assay was developed for the commercially available SURFE²R N1 instrument (Nanion Technologies GmbH) which applies solid supported membrane (SSM)-based electrophysiology. This technique is widely used for the functional characterization of membrane transporters with more than 100 different transporters characterized so far. The technique is cost-effective, easy to use, and capable of high-throughput measurements.SSM-based electrophysiology utilizes SSM-coated gold sensors to physically adsorb membrane vesicles containing the protein of interest. A fast solution exchange provides the substrate and activates transport. For the measurement of PepT1 activity, we applied a peptide concentration jump to activate H⁺/peptide symport. Proton influx charges the sensor. A capacitive current is measured reflecting the transport activity of PepT1 . Multiple measurements on the same sensor allow for comparison of transport activity under different conditions. Here, we determine EC₅₀ for PepT1-mediated glycylglycine transport and perform an inhibition experiment using the specific peptide inhibitor Lys[Z(NO₂)]-Val.

Signaling ammonium across membranes through an ammonium sensor histidine kinase

Sensing and uptake of external ammonium is essential for anaerobic ammonium-oxidizing (anammox) bacteria, and is typically the domain of the ubiquitous Amt/Rh ammonium transporters. Here, we report on the structure and function of an ammonium sensor/transducer from the anammox bacterium "Candidatus Kuenenia stuttgartiensis" that combines a membrane-integral ammonium transporter domain with a fused histidine kinase. It contains a high-affinity ammonium binding site not present in assimilatory Amt proteins. The levels of phosphorylated histidine in the kinase are coupled to the presence of ammonium, as conformational changes during signal recognition by the Amt module are transduced internally to modulate the kinase activity. The structural analysis of this ammonium sensor by X-ray crystallography and small-angle X-ray-scattering reveals a flexible, bipartite system that recruits a large uptake transporter as a sensory module and modulates its functionality to achieve a mechanistic coupling to a kinase domain in order to trigger downstream signaling events.

A Loose Relationship: Incomplete H+/Sugar Coupling in the MFS Sugar Transporter GlcP

The glucose transporter from Staphylococcus epidermidis, GlcP_Se, is a homolog of the human GLUT sugar transporters of the major facilitator superfamily. Together with the xylose transporter from Escherichia coli, XylE_Ec, the other prominent prokaryotic GLUT homolog, GlcP_Se, is equipped with a conserved proton-binding site arguing for an electrogenic transport mode. However, the electrophysiological analysis of GlcP_Se presented here reveals important differences between the two GLUT homologs. GlcP_Se, unlike XylE_Ec, does not perform steady-state electrogenic transport at symmetrical pH conditions. Furthermore, when a pH gradient is applied, partially uncoupled transport modes can be generated. In contrast to other bacterial sugar transporters analyzed so far, in GlcP_Se sugar binding, translocation and release are also accomplished by the deprotonated transporter. Based on these experimental results, we conclude that coupling of sugar and H⁺ transport is incomplete in GlcP_Se. To verify the viability of the observed partially coupled GlcP_Se transport modes, we propose a universal eight-state kinetic model in which any degree of coupling is realized and H⁺/sugar symport represents only a specific instance. Furthermore, using sequence comparison with strictly coupled XylE_Ec and similar sugar transporters, we identify an additional charged residue that may be essential for effective H⁺/sugar symport.

SSM-Based Electrophysiology for Transporter Research

Functional characterization of transport proteins using conventional electrophysiology can be challenging, especially for low turnover transporters or transporters from bacteria and intracellular compartments. Solid-supported membrane (SSM)-based electrophysiology is a sensitive and cell-free assay technique for the characterization of electrogenic membrane proteins. Purified proteins reconstituted into proteoliposomes or membrane vesicles from cell culture or native tissues are adsorbed to the sensor holding an SSM. A substrate or a ligand is applied via rapid solution exchange. The electrogenic transporter activity charges the sensor, which is recorded as a transient current. The high stability of the SSM allows cumulative measurements on the same sensor using different experimental conditions. This allows the determination of kinetic properties including EC₅₀, IC₅₀, K_m, K_D, and rate constants of electrogenic reactions. About 100 different transporters have been measured so far using this technique, among them symporters, exchangers, uniporters, ATP-, redox-, and light-driven ion pumps, as well as receptors and ion channels. Different instruments apply this technique: the laboratory setups use a closed flow-through arrangement, while the commercially available SURFE²R N1 resembles a pipetting robot. For drug screening purposes high-throughput systems, such as the SURFE²R 96SE enable the simultaneous measurement of up to 96 sensors.

pH Regulation of Electrogenic Sugar/H+ Symport in MFS Sugar Permeases

Bacterial sugar symporters in the Major Facilitator Superfamily (MFS) use the H+ (and in a few cases Na+) electrochemical gradients to achieve active transport of sugar into the cell. Because a number of structures of MFS sugar symporters have been solved recently, molecular insight into the transport mechanism is possible from detailed functional analysis. We present here a comparative electrophysiological study of the lactose permease (LacY), the fucose permease (FucP) and the xylose permease (XylE), which reveals common mechanistic principles and differences. In all three symporters energetically downhill electrogenic sugar/H+ symport is observed. Comparison of the pH dependence of symport at symmetrical pH exhibits broad bell-shaped pH profiles extending over 3 to 6 pH units and a decrease at extremely alkaline pH ≥ 9.4 and at acidic to neutral pH = 4.6-7.5. The pH dependence can be described by an acidic to neutral apparent pK (pKapp) and an alkaline pKapp. Experimental evidence suggests that the alkaline pKapp is due to H+ depletion at the protonation site, while the acidic pKapp is due to inhibition of deprotonation. Since previous studies suggest that a single carboxyl group in LacY (Glu325) may be the only side chain directly involved in H+ translocation and a carboxyl side chain with similar properties has been identified in FucP (Asp46) and XylE (Asp27), the present results imply that the pK of this residue is switched during H+/sugar symport in all three symporters.

Effect of Detergents on Galactoside Binding by Melibiose Permeases

The effect of various detergents on the stability and function of the melibiose permeases of Escherichia coli (MelBEc) and Salmonella typhimurium (MelBSt) was studied. In n-dodecyl-β-d-maltoside (DDM) or n-undecyl-β-d-maltoside (UDM), WT MelBSt binds melibiose with an affinity similar to that in the membrane. However, with WT MelBEc or MelBSt mutants (Arg141 → Cys, Arg295 → Cys, or Arg363 → Cys), galactoside binding is not detected in these detergents, but binding to the phosphotransferase protein IIA(Glc) is maintained. In the amphiphiles lauryl maltose neopentyl glycol (MNG-3) or glyco-diosgenin (GDN), galactoside binding with all of the MelB proteins is observed, with slightly reduced affinities. MelBSt is more thermostable than MelBEc, and the thermostability of either MelB is largely increased in MNG-3 or GDN. Therefore, the functional defect with DDM or UDM likely results from the relative instability of the sensitive MelB proteins, and stability, as well as galactoside binding, is retained in MNG-3 or GDN. Furthermore, isothermal titration calorimetry of melibiose binding with MelBSt shows that the favorable entropic contribution to the binding free energy is decreased in MNG-3, indicating that the conformational dynamics of MelB is restricted in this detergent.

Direct observation of electrogenic NH4(+) transport in ammonium transport (Amt) proteins

Ammonium transport (Amt) proteins form a ubiquitous family of integral membrane proteins that specifically shuttle ammonium across membranes. In prokaryotes, archaea, and plants, Amts are used as environmental NH4(+) scavengers for uptake and assimilation of nitrogen. In the eukaryotic homologs, the Rhesus proteins, NH4(+)/NH3 transport is used instead in acid-base and pH homeostasis in kidney or NH4(+)/NH3 (and eventually CO2) detoxification in erythrocytes. Crystal structures and variant proteins are available, but the inherent challenges associated with the unambiguous identification of substrate and monitoring of transport events severely inhibit further progress in the field. Here we report a reliable in vitro assay that allows us to quantify the electrogenic capacity of Amt proteins. Using solid-supported membrane (SSM)-based electrophysiology, we have investigated the three Amt orthologs from the euryarchaeon Archaeoglobus fulgidus. Af-Amt1 and Af-Amt3 are electrogenic and transport the ammonium and methylammonium cation with high specificity. Transport is pH-dependent, with a steep decline at pH values of ∼5.0. Despite significant sequence homologies, functional differences between the three proteins became apparent. SSM electrophysiology provides a long-sought-after functional assay for the ubiquitous ammonium transporters.

Electrophysiological characterization of uncoupled mutants of LacY

In this study of the lactose permease of Escherichia coli (LacY), five functionally irreplaceable residues involved specifically in H(+) translocation (Arg302 and Glu325) or in the coupling between protonation and sugar binding (Tyr236, Glu269, and His322) were mutated individually or together with mutant Glu325 → Ala. The wild type and each mutant were purified and reconstituted into proteoliposomes, which were then examined using solid-supported-membrane-based electrophysiology. Mutants Glu325 → Ala or Arg302 → Ala, in which H(+) symport is abolished, exhibit a weakly electrogenic rapid reaction triggered by sugar binding. The reaction is essentially absent in mutant Tyr236 → Phe, Glu269 → Ala, and His322 → Ala, and each of these mutations blocks the electrogenic reaction observed in the Glu325 → Ala mutant. The findings are consistent with the interpretation that the electrogenic reaction induced by sugar binding is due to rearrangement of charged residues in LacY and that this reaction is blocked by mutation of each member of the Tyr236/Glu269/His322 triad. In addition, further support is provided for the conclusion that deprotonation is rate limiting for downhill lactose/H(+) symport.

Introduction to solid supported membrane based electrophysiology

The electrophysiological method we present is based on a solid supported membrane (SSM) composed of an octadecanethiol layer chemisorbed on a gold coated sensor chip and a phosphatidylcholine monolayer on top. This assembly is mounted into a cuvette system containing the reference electrode, a chlorinated silver wire.

After adsorption of membrane fragments or proteoliposomes containing the membrane protein of interest, a fast solution exchange is used to induce the transport activity of the membrane protein. In the single solution exchange protocol two solutions, one non-activating and one activating solution, are needed. The flow is controlled by pressurized air and a valve and tubing system within a faraday cage.

The kinetics of the electrogenic transport activity is obtained via capacitive coupling between the SSM and the proteoliposomes or membrane fragments. The method, therefore, yields only transient currents. The peak current represents the stationary transport activity. The time dependent transporter currents can be reconstructed by circuit analysis.

This method is especially suited for prokaryotic transporters or eukaryotic transporters from intracellular membranes, which cannot be investigated by patch clamp or voltage clamp methods.

Functional characterization of a ClC transporter by solid-supported membrane electrophysiology

EcClC, a prokaryotic member of the ClC family of chloride channels and transporters, works as coupled H⁺/Cl⁻ exchanger. With a known structure and the possibility of investigating its behavior with different biochemical and biophysical techniques, the protein has become an important model system for the family. Although many aspects of its function have been previously characterized, it was difficult to measure transport on the same sample under different environmental conditions. To overcome this experimental limitation, we have studied EcClC by solid-supported membrane electrophysiology. The large transport-related transient currents and a simple way of relating transport rates to the measured signal have allowed a thorough investigation of ion selectivity, inhibition, and the dependence of transport on changes in ion concentration and pH. Our results confirm that the protein transports larger anions with about similar rates, whereas the smaller fluoride is not a substrate. We also show that 4,4′-diisothiocyano-2,2’-stilbenedisulfonic acid (DIDS), a known inhibitor of other anion transport protein, irreversibly inhibits EcClC from the intracellular side. The chloride dependence shows an apparent saturation at millimolar concentrations that resembles a similar behavior in eukaryotic ClC channels. Our experiments have also allowed us to quantify the pH dependence of transport. EcClC shows a strong activation at low pH with an apparent pKa of 4.6. The pronounced pH dependence is lost by the mutation of a conserved glutamate facing the extracellular solution that was previously shown to be an acceptor for transported protons, whereas it is largely retained by the mutation of an equivalent residue at the intracellular side. Our results have provided a quantitative basis for the transport behavior of EcClC, and they will serve as a reference for future investigations of novel electrogenic transporters with still-uncharacterized properties.

Reduced Na+ affinity increases turnover of Salmonella enterica serovar Typhimurium MelB

The melibiose permease of Salmonella enterica serovar Typhimurium (MelB(St)) catalyzes symport of melibiose with Na(+), Li(+), or H(+). Bioinformatics and mutational analyses indicate that a conserved Gly117 (helix IV) is a component of the Na(+)-binding site. In this study, Gly117 was mutated to Ser, Asn, or Cys. All three mutations increase the maximum rate (V(max)) for melibiose transport in Escherichia coli DW2 and greatly decrease Na(+) affinity, indicating that intracellular release of Na(+) is facilitated. Rapid melibiose transport, particularly by the G117N mutant, triggers osmotic lysis in the lag phase of growth. The findings support the previous conclusion that Gly117 plays an important role in cation binding and translocation. Furthermore, a spontaneous second-site mutation (P148L between loop(4-5) and helix V) in the G117C mutant prevents cell lysis. This mutation significantly decreases V(max) with little effect on cosubstrate binding in G117C, G117S, and G117N mutants. Thus, the P148L mutation specifically inhibits transport velocity and thereby blocks the lethal effect of elevated melibiose transport in the Gly117 mutants.

Role of Gly117 in the cation/melibiose symport of MelB of Salmonella typhimurium

The melibiose permease of Salmonella typhimurium (MelB(St)) catalyzes symport of melibiose with Na(+), Li(+), or H(+), and bioinformatics analysis indicates that a conserved Gly117 (helix IV) is part of the Na(+)-binding site. We mutated Gly117 to Ala, Pro, Trp, or Arg; the effects on melibiose transport and binding of cosubstrates depended on the physical-chemical properties of the side chain. Compared with WT MelB(St), the Gly117 → Ala mutant exhibited little difference in either cosubstrate binding or stimulation of melibiose transport by Na(+) or Li(+), but all other mutations reduced melibiose active transport and efflux, and decreased the apparent affinity for Na(+). The bulky Trp at position 117 caused the greatest inhibition of melibiose binding, and Gly117 → Arg yielded less than a 4-fold decrease in the apparent affinity for melibiose at saturating Na(+) or Li(+) concentration. Remarkably, the mutant Gly117 → Arg catalyzed melibiose exchange in the presence of Na(+) or Li(+), but did not catalyze melibiose translocation involving net flux of the coupling cation, indicating that sugar is released prior to release of the coupling cation. Taken together, the findings are consistent with the notion that Gly117 plays an important role in cation binding and translocation.

G117C MelB, a mutant melibiose permease with a changed conformational equilibrium

Replacement of the glycine at position 117 by a cysteine in the melibiose permease creates an interesting phenotype: while the mutant transporter shows still transport activity comparable to the wild type its pre steady-state kinetic properties are drastically altered. The transient charge displacements after substrate concentration jumps are strongly reduced and the fluorescence changes disappear. Together with its maintained transport activity this indicates that substrate translocation in G117C melibiose permease is not impaired but that the initial conformation of the mutant transporter differs from that of the wild type permease. A kinetic model for the G117C melibiose permease based on a rapid dynamic equilibrium of the substrate free transporter is proposed. Implications of the kinetic model for the transport mechanism of the wild type permease are discussed.

Robust Electrophysiological Assays using Solid Supported Membranes: the Organic Cation Transporter OCT2

An electrophysiological assay platform based on solid supported membranes (SSM) for the organic cation transporter (OCT) is presented. Stable Chinese hamster ovary (CHO) cell lines overexpressing the human (hOCT2) and rat transporters (rOCT2) were generated and validated. Membrane preparations from the cell lines were investigated using SSM-based electrophysiology. Baculovirus transfected insect cells (HighFive and Mimic Sf9) were also tested with the same assay but yielded less than optimal results. The assays were validated by the determination of substrate affinities and inhibition by standard inhibitors. The study demonstrates the suitability of the SSM-based electrophysiological OCT assay for rapid and automatic screening of drug candidates.

Mechanism of melibiose/cation symport of the melibiose permease of Salmonella typhimurium

The MelB permease of Salmonella typhimurium (MelB-ST) catalyzes the coupled symport of melibiose and Na(+), Li(+), or H(+). In right-side-out membrane vesicles, melibiose efflux is inhibited by an inwardly directed gradient of Na(+) or Li(+) and stimulated by equimolar concentrations of internal and external Na(+) or Li(+). Melibiose exchange is faster than efflux in the presence of H(+) or Na(+) and stimulated by an inwardly directed Na(+) gradient. Thus, sugar is released from MelB-ST externally prior to the release of cation in agreement with current models proposed for MelB of Escherichia coli (MelB-EC) and LacY. Although Li(+) stimulates efflux, and an outwardly directed Li(+) gradient increases exchange, it is striking that internal and external Li(+) with no gradient inhibits exchange. Furthermore, Trp → dansyl FRET measurements with a fluorescent sugar (2'-(N-dansyl)aminoalkyl-1-thio-β-D-galactopyranoside) demonstrate that MelB-ST, in the presence of Na(+) or Li(+), exhibits (app)K(d) values of ∼1 mM for melibiose. Na(+) and Li(+) compete for a common binding pocket with activation constants for FRET of ∼1 mM, whereas Rb(+) or Cs(+) exhibits little or no effect. Taken together, the findings indicate that MelB-ST utilizes H(+) in addition to Na(+) and Li(+). FRET studies also show symmetrical emission maximum at ∼500 nm with MelB-ST in the presence of 2'-(N-dansyl)aminoalkyl-1-thio-β-D-galactopyranoside and Na(+), Li(+), or H(+), which implies a relatively homogeneous distribution of conformers of MelB-ST ternary complexes in the membrane.

Delineating electrogenic reactions during lactose/H+ symport

Electrogenic reactions accompanying downhill lactose/H(+) symport catalyzed by the lactose permease of Escherichia coli (LacY) have been assessed using solid-supported membrane-based electrophysiology with improved time resolution. Rates of charge translocation generated by purified LacY reconstituted into proteoliposomes were analyzed over a pH range from 5.2 to 8.5, which allows characterization of two electrogenic steps in the transport mechanism: (i) a weak electrogenic reaction triggered by sugar binding and observed under conditions where H(+) translocation is abolished either by acidic pH or by a Glu325 --> Ala mutation in the H(+) binding site (this step with a rate constant of approximately 200 s(-1) for wild-type LacY leads to an intermediate proposed to represent an "occluded" state) and (ii) a major electrogenic reaction corresponding to 94% of the total charge translocated at pH 8, which is pH-dependent with a maximum rate of approximately 30 s(-1) and a pK of 7.5. This partial reaction is assigned to rate-limiting H(+) release on the cytoplasmic side of LacY during turnover. These findings together with previous electrophysiological results and biochemical-biophysical studies are included in an overall kinetic mechanism that allows delineation of the electrogenic steps in the reaction pathway.

Measuring ion channels on solid supported membranes

Application of solid supported membranes (SSMs) for the functional investigation of ion channels is presented. SSM-based electrophysiology, which has been introduced previously for the investigation of active transport systems, is expanded for the analysis of ion channels. Membranes or liposomes containing ion channels are adsorbed to an SSM and a concentration gradient of a permeant ion is applied. Transient currents representing ion channel transport activity are recorded via capacitive coupling. We demonstrate the application of the technique to liposomes reconstituted with the peptide cation channel gramicidin, vesicles from native tissue containing the nicotinic acetylcholine receptor, and membranes from a recombinant cell line expressing the ionotropic P2X2 receptor. It is shown that stable ion gradients, both inside as well as outside directed, can be applied and currents are recorded with an excellent signal/noise ratio. For the nicotinic acetylcholine receptor and the P2X2 receptor excellent assay quality factors of Z' = 0.55 and Z' = 0.67, respectively, are obtained. This technique opens up new possibilities in cases where conventional electrophysiology fails like the functional characterization of ion channels from intracellular compartments. It also allows for robust fully automatic assays for drug screening.

Alteration of sugar-induced conformational changes of the melibiose permease by mutating Arg141 in loop 4-5

The melibiose permease (MelB) from Escherichia coli couples the uptake of melibiose to that of Na+, Li+, or H+. In this work, we applied attenuated total reflection Fourier transform infrared (ATR-FTIR) difference spectroscopy to obtain information about the structural changes involved in substrate interaction with the R141C mutant and with the wild-type MelB reacted with N-ethylmaleimide (NEM). These modified permeases have the ability to bind the substrates but fail to transport them. It is shown that the sugar-induced ATR-FTIR difference spectra of the R141C mutant are different from those corresponding to the Cys-less permease from which it is derived. There are alterations of peaks assigned to turns and beta-structures located most likely in loop 4-5. In addition, and quite notably, a peak at 1659 cm(-1), assigned to changes at the level of one alpha-helix subpopulation, disappears in the melibiose-induced difference spectrum in the presence of Na+, suggesting a reduction of the conformational change capacity of the mutated MelB. These helices may involve structural components that couple the cation- and sugar-binding sites. On the other hand, MelB-NEM difference spectra are proportionally less disrupted than the R141C ones. Hence, the transport cycle of these two permeases, modified at two different loops, is most likely impaired at a different stage. It is proposed that the R141C mutant leads to the generation of a partially defective ternary complex that is unable to catalyze the subsequent conformational change necessary for substrate translocation.

Electrophysiological characterization of LacY

Electrogenic events due to the activity of wild-type lactose permease from Escherichia coli (LacY) were investigated with proteoliposomes containing purified LacY adsorbed on a solid-supported membrane electrode. Downhill sugar/H(+) symport into the proteoliposomes generates transient currents. Studies at different lipid-to-protein ratios and at different pH values, as well as inactivation by N-ethylmaleimide, show that the currents are due specifically to the activity of LacY. From analysis of the currents under different conditions and comparison with biochemical data, it is suggested that the predominant electrogenic event in downhill sugar/H(+) symport is H(+) release. In contrast, LacY mutants Glu-325-->Ala and Cys-154-->Gly, which bind ligand normally, but are severely defective with respect to lactose/H(+) symport, exhibit only a small electrogenic event on addition of LacY-specific substrates, representing 6% of the total charge displacement of the wild-type. This activity is due either to substrate binding per se or to a conformational transition after substrate binding, and is not due to sugar/H(+) symport. We propose that turnover of LacY involves at least 2 electrogenic reactions: (i) a minor electrogenic step that occurs on sugar binding and is due to a conformational transition in LacY; and (ii) a major electrogenic step probably due to cytoplasmic release of H(+) during downhill sugar/H(+) symport, which is the limiting step for this mode of transport.

An automatic electrophysiological assay for the neuronal glutamate transporter mEAAC1

A rapid and robust electrophysiological assay based on solid supported membranes (SSM) for the murine neuronal glutamate transporter mEAAC1 is presented. Measurements at different concentrations revealed the EAAC1 specific affinities for l-glutamate (K(m)=24microM), l-aspartate (K(m)=5microM) and Na(+) (K(m)=33mM) and an inhibition constant K(i) for dl-threo-beta-benzyloxyaspartic acid (TBOA) of 1microM. Inhibition by 3-hydroxy-4,5,6,6a-tetrahydro-3aH-pyrrolo[3,4-d]isoxazole-6-carboxylic acid (HIP-B) was not purely competitive with an IC(50) of 13microM. Experiments using SCN(-) concentration jumps yielded large transient currents in the presence of l-glutamate showing the characteristics of the glutamate-gated anion conductance of EAAC1. Thus, SSM-based electrophysiology allows the analysis of all relevant transport modes of the glutamate transporter on the same sample. K(+) and Na(+) gradients could be applied to the transporter. Experiments in the presence and absence of Na(+) and K(+) gradients demonstrated that the protein is still able to produce a charge translocation when no internal K(+) is present. In this case, the signal amplitude is smaller and a lower apparent affinity for l-glutamate of 144microM is found. Finally the assay was adapted to a commercial fully automatic system for SSM-based electrophysiology and was validated by determining the substrate affinities and inhibition constants as for the laboratory setup. The combination of automatic function and its ability to monitor all transport modes of EAAC1 make this system an universal tool for industrial drug discovery.

SSM-based electrophysiology

An assay technique for the electrical characterization of electrogenic transport proteins on solid supported membranes is presented. Membrane vesicles, proteoliposomes or membrane fragments containing the transporter are adsorbed to the solid supported membrane and are activated by providing a substrate or a ligand via a rapid solution exchange. This technique opens up new possibilities where conventional electrophysiology fails like transporters or ion channels from bacteria and from intracellular compartments. Its rugged design and potential for automation make it suitable for drug screening.