Lipid transfer between charged supported lipid bilayers and oppositely charged vesicles

Interaction Kinetics of Individual mRNA-Containing Lipid Nanoparticles with an Endosomal Membrane Mimic: Dependence on pH, Protein Corona Formation, and Lipoprotein Depletion

Lipid nanoparticles (LNPs) have emerged as potent carriers for mRNA delivery, but several challenges remain before this approach can offer broad clinical translation of mRNA therapeutics. To improve their efficacy, a better understanding is required regarding how LNPs are trapped and processed at the anionic endosomal membrane prior to mRNA release. We used surface-sensitive fluorescence microscopy with single LNP resolution to investigate the pH dependency of the binding kinetics of ionizable lipid-containing LNPs to a supported endosomal model membrane. A sharp increase of LNP binding was observed when the pH was lowered from 6 to 5, accompanied by stepwise large-scale LNP disintegration. For LNPs preincubated in serum, protein corona formation shifted the onset of LNP binding and subsequent disintegration to lower pH, an effect that was less pronounced for lipoprotein-depleted serum. The LNP binding to the endosomal membrane mimic was observed to eventually become severely limited by suppression of the driving force for the formation of multivalent bonds during LNP attachment or, more specifically, by charge neutralization of anionic lipids in the model membrane due to their association with cationic lipids from earlier attached LNPs upon their disintegration. Cell uptake experiments demonstrated marginal differences in LNP uptake in untreated and lipoprotein-depleted serum, whereas lipoprotein-depleted serum increased mRNA-controlled protein (eGFP) production substantially. This complies with model membrane data and suggests that protein corona formation on the surface of the LNPs influences the nature of the interaction between LNPs and endosomal membranes.

Surface-Functionalized Polystyrene Nanoparticles Alter the Transmembrane Potential via Ion-Selective Pores Maintaining Global Bilayer Integrity

Although nanoplastics have well-known toxic effects toward the environment and living organisms, their molecular toxicity mechanisms, including the nature of nanoparticle-cell membrane interactions, are still under investigation. Here, we employ dynamic light scattering, quartz crystal microbalance with dissipation monitoring, and electrophysiology to investigate the interaction between polystyrene nanoparticles (PS NPs) and phospholipid membranes. Our results show that PS NPs adsorb onto lipid bilayers creating soft inhomogeneous films that include disordered defects. PS NPs form an integral part of the generated channels so that the surface functionalization and charge of the NP determine the pore conductive properties. The large difference in size between the NP diameter and the lipid bilayer thickness (∼60 vs ∼5 nm) suggests a particular and complex lipid-NP assembly that is able to maintain overall membrane integrity. In view of this, we suggest that NP-induced toxicity in cells could operate in more subtle ways than membrane disintegration, such as inducing lipid reorganization and transmembrane ionic fluxes that disrupt the membrane potential.

Asymmetric Lipid Transfer between Zwitterionic Vesicles by Nanoviscosity Measurements

The interest in nano-sized lipid vesicles in nano-biotechnology relies on their use as mimics for endosomes, exosomes, and nanocarriers for drug delivery. The interactions between nanoscale size lipid vesicles and cell membranes involve spontaneous interbilayer lipid transfer by several mechanisms, such as monomer transfer or hemifusion. Experimental approaches toward monitoring lipid transfer between nanoscale-sized vesicles typically consist of transfer assays by fluorescence microscopy requiring the use of labels or calorimetric measurements, which in turn require a large amount of sample. Here, the capability of a label-free surface-sensitive method, quartz crystal microbalance with dissipation monitoring (QCM-D), was used to monitor lipid transfer kinetics at minimal concentrations and to elucidate how lipid physicochemical properties influence the nature of the transfer mechanism and dictate its dynamics. By studying time-dependent phase transitions obtained from nanoviscosity measurements, the transfer rates (unidirectional or bidirectional) between two vesicle populations consisting of lipids with the same head group and differing alkyl chain length can be estimated. Lipid transfer is asymmetric and unidirectional from shorter-chain lipid donor vesicles to longer-chain lipid acceptor vesicles. The transfer is dramatically reduced when the vesicle populations are incubated at temperatures below the melting of one of the vesicle populations.

Effect of Glucose on the Mobility of Membrane-Adhering Liposomes

Enclosed lipid bilayer structures, referred to as liposomes or lipid vesicles, have a wide range of biological functions, such as cellular signaling and membrane trafficking. The efficiency of cellular uptake of liposomes, a key step in many of these functions, is strongly dependent on the contact area between a liposome and a cell membrane, which is governed by the adhesion force w, the membrane bending energy κ, and the osmotic pressure Δp. Herein, we investigate the relationship between these forces and the physicochemical properties of the solvent, namely, the presence of glucose (a nonionic osmolyte). Using fluorescence microscopy, we measure the diffusivity D of small (∼50 nm radius), fluorescently labeled liposomes adhering to a supported lipid bilayer or to the freestanding membrane of a giant (∼10 μm radius) liposome. It is observed that glucose in solution reduces D on the supported membrane, while having negligible effect on D on the freestanding membrane. Using well-known hydrodynamic theory for the diffusivity of membrane inclusions, these observations suggest that glucose enhances the contact area between the small liposomes and the underlying membrane, while not affecting the viscosity of the underlying membrane. In addition, quartz crystal microbalance experiments showed no significant change in the hydrodynamic height of the adsorbed liposomes, upon adding glucose. This observation suggests that instead of osmotic deflation, glucose enhances the contact area via adhesion forces, presumably due to the depletion of the glucose molecules from the intermembrane hydration layer.

Monitoring of single and double lipid membrane formation with high spatiotemporal resolution using evanescent light scattering microscopy

Formation and quality of single solid supported lipid membranes and double lipid membranes were investigated with single vesicle resolution using label-free evanescence light scattering microscopy (EvSM). For the formation of double lipid membranes we made use of electrostatic interaction between charged lipids and oppositely charged cations.

Hydrodynamic Propulsion of Liposomes Electrostatically Attracted to a Lipid Membrane Reveals Size-Dependent Conformational Changes

The efficiency of lipid nanoparticle uptake across cellular membranes is strongly dependent on the very first interaction step. Detailed understanding of this step is in part hampered by the large heterogeneity in the physicochemical properties of lipid nanoparticles, such as liposomes, making conventional ensemble-averaging methods too blunt to address details of this complex process. Here, we contribute a means to explore whether individual liposomes become deformed upon binding to fluid cell-membrane mimics. This was accomplished by using hydrodynamic forces to control the propulsion of nanoscale liposomes electrostatically attracted to a supported lipid bilayer. In this way, the size of individual liposomes could be determined by simultaneously measuring both their individual drift velocity and diffusivity, revealing that for a radius of ∼45 nm, a close agreement with dynamic light scattering data was observed, while larger liposomes (radius ∼75 nm) displayed a significant deformation unless composed of a gel-phase lipid. The relevance of being able to extract this type of information is discussed in the context of membrane fusion and cellular uptake.

Size-dependent, stochastic nature of lipid exchange between nano-vesicles and model membranes

The interaction of nanoscale lipid vesicles with cell membranes is of fundamental importance for the design and development of vesicular drug delivery systems. Here, we introduce a novel approach to study vesicle-membrane interactions whereby we are able to probe the influence of nanoscale membrane properties on the dynamic adsorption, exchange, and detachment of vesicles. Using total internal reflection fluorescence (TIRF) microscopy, we monitor these processes in real-time upon the electrostatically tuned attachment of individual, sub-100 nm vesicles to a supported lipid bilayer. The observed exponential vesicle detachment rate depends strongly on the vesicle size, but not on the vesicle charge, which suggests that lipid exchange occurs during a single stochastic event, which is consistent with membrane stalk formation. The fluorescence microscopy assay developed in this work may enable measuring of the probability of stalk formation in a controlled manner, which is of fundamental importance in membrane biology, offering a new tool to understand nanoscale phenomena in the context of biological sciences.

Brownian Dynamics of Electrostatically Adhering Small Vesicles to a Membrane Surface Induces Domains and Probes Viscosity

Using single-particle tracking, we investigate the interaction of small unilamellar vesicles (SUVs) that are electrostatically tethered to the freestanding membrane of a giant unilamellar vesicle (GUV). We find that the surface mobility of the GUV-riding SUVs is Brownian, insensitive to the bulk viscosity, vesicle size, and vesicle fluidity but strongly altered by the viscosity of the underlying membrane. Analyzing the diffusional behavior of SUVs within the Saffman-Delbrück model for the dynamics of membrane inclusions supports the notion that the mobility of the small vesicles is coupled to that of dynamically induced lipid clusters within the target GUV membrane. The reversible binding also offers a nonperturbative means for measuring the viscosity of biomembranes, which is an important parameter in cell physiology and function.

TiO2 nanoparticle interactions with supported lipid membranes – an example of removal of membrane patches

Different levels of model systems are needed for effect studies of engineered nanoparticles and the development of nanoparticle structure–activity relationships in biological systems.

Supported Lipid Bilayers for the Generation of Dynamic Cell-Material Interfaces

Supported lipid bilayers (SLB) offer unique possibilities for studying cellular membranes and have been used as a synthetic architecture to interact with cells. Here, the state-of-the-art in SLB-based technology is presented. The fabrication, analysis, characteristics and modification of SLBs are described in great detail. Numerous strategies to form SLBs on different substrates, and the means to patteren them, are described. The use of SLBs as model membranes for the study of membrane organization and membrane processes in vitro is highlighted. In addition, the use of SLBs as a substratum for cell analysis is presented, with discrimination between cell-cell and cell-extracellular matrix (ECM) mimicry. The study is concluded with a discussion of the potential for in vivo applications of SLBs.

Ionic liquids affect the adsorption of liposomes onto cationic polyelectrolyte coated silica evidenced by quartz crystal microbalance

The worldwide use of ionic liquids (ILs) is steadily increasing, and even though they are often referred to as "green solvents" they have been reported to be toxic, especially toward aquatic organisms. In this work, we thoroughly study two phosphonium ILs; octyltributylphosphonium chloride ([P8444]Cl) and tributyl(tetradecyl)phosphonium chloride ([P14444]Cl). Firstly, the critical micelle concentrations (CMCs) of the ILs were determined with fluorescence spectroscopy and the optical pendant drop method in order to gain an understanding of the aggregation behavior of the ILs. Secondly, a biomimicking system of negatively charged unilamellar liposomes was used in order to study the effect of the ILs on biomembranes. Changes in the mechanical properties of adsorbed liposomes were determined by quartz crystal microbalance (QCM) measurements with silica coated quartz crystal sensors featuring a polycation layer. The results confirmed that both ILs were able to incorporate and alter the biomembrane structure. The membrane disrupting effect was emphasized with an increasing concentration and alkyl chain length of the ILs. In the extreme case, the phospholipid membrane integrity was completely compromised.

No Evidence for Spontaneous Lipid Transfer at ER-PM Membrane Contact Sites

Non-vesicular lipid transport steps play a crucial role in lipid trafficking and potentially include spontaneous exchange. Since membrane contact facilitates this lipid transfer, it is most likely to occur at membrane contact sites (MCS). However, to date it is unknown whether closely attached biological membranes exchange lipids spontaneously. We have set up a system for studying the exchange of lipids at MCS formed between the endoplasmic reticulum (ER) and the plasma membrane. Contact sites were stably anchored and the lipids cholesterol and phosphatidylcholine (PC) were not capable of transferring spontaneously into the opposed bilayer. We conclude that physical contact between two associated biological membranes is not sufficient for transfer of the lipids PC and cholesterol.

Porphyrin-loaded liposomes and graphene oxide used for the membrane pore-forming protein assay and inhibitor screening

The interaction of planar aromatic molecules with the graphene oxide (GO) sheets is often marked by the fluorescence quenching of the former. Here, the α,β,γ,δ-tetrakis[4-(trimethylammoniumyl)phenyl]porphyrin (TAPP) molecules and the GO, corresponding to the energy donor and the acceptor respectively, are initially separated by encapsulating the TAPP molecules within the liposomes, to obstruct the formation of the self-assembled energy transfer-based quenching system. Upon disruption of the liposome membranes by the PLA2 or the α-toxin, the encapsulated TAPP molecules are released and subsequently result in significant fluorescence changes. Thus, a platform based on the fluorescence signal for monitoring the activity of the membrane pore-forming protein with advantages of high sensitivity and commonality was established. Using this strategy, we can detect the PLA2 and the α-toxin concentrations as low as 200 pM and 9.0 nM, respectively. Furthermore, by taking chlorpromazine and baicalin as the examples, we use the assay to evaluate the prohibition effects on the PLA2 and the α-toxin, and the IC50 values of chlorpromazine toward the PLA2 (9.6 nM) and that of baicalin toward the α-toxin (289.2 nM) were found to be 12.0 ± 0.62 μM and 26.9 ± 2.6 μM, respectively.

Soft landing of cell-sized vesicles on solid surfaces for robust vehicle capture/release

Based on a concept of a smooth and steady landing of fragile objects without destruction via a soft cushion, we have developed a model for the soft landing of deformable lipid giant unilamellar vesicles (GUVs) on solid surfaces. The foundation for a successful soft landing is a solid substrate with a two-layer coating, including a bottom layer of positively charged lysozymes and an upper lipid membrane layer. We came to a clear conclusion that anionic GUVs when sedimented on a surface, the vesicle rupture occurs upon the direct contact with the positively charged lysozyme layer due to the strong coulombic interactions. In contrast, certain separation distances was achieved by the insertion of a soft lipid membrane cushion between the charged GUVs and the lysozyme layer, which attenuated the coulombic force and created a mild buffer zone, ensuring the robust capture of GUVs on the substrate without their rupture. The non-covalent bonding facilitated a fully reversible stimuli-responsive capture/release of GUVs from the biomimetic solid surface, which has never been demonstrated before due to the extreme fragility of GUVs. Moreover, the controllable capture/release of cells has been proven to be of vital importance in biotechnology, and similarity the present approach to capture/release cells is expected to open the previously inaccessible avenues of research.

A time-resolved study on the interaction of oppositely charged bicelles--implications on the charged lipid exchange kinetics

Time-resolved small-angle X-ray scattering was applied to study charged lipid exchange between oppositely charged disc-shaped bicelles. The exchange of charged lipids gradually reduces the surface charge density and weakens the electrostatic attraction between the oppositely charged bicelles which form alternately stacked aggregates upon mixing. Initially, at a high surface charge density with almost no free water layer between the stacked bicelles, fast exchange kinetics dominate the exchange process. At a later stage with a lower surface charge density and a larger water gap between the stacked bicelles, slow exchange kinetics take over. The fast exchange kinetics are correlated with the close contact of the bicelles when there is almost no free water layer between the tightly bound bicelles with a charged lipid exchange time constant as short as 20-40 min. When the water gap becomes large enough to have a free water layer between the stacked bicelles, the fast lipid exchange kinetics are taken over by slow lipid exchange kinetics with time constants around 200-300 min, which are comparable to the typical time constant of lipid exchange between vesicles in aqueous solution. These two kinds of exchange mode fit well with the lipid exchange models of transient hemifusion for the fast mode and monomer exchange for the slow mode.

Lipid exchange and transfer on nanoparticle supported lipid bilayers: effect of defects, ionic strength, and size

Lipid exchange/transfer has been compared for zwitterionic 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 1,2-dimyristoyl-d54-sn-glycero-3-phosphocholine (DMPC) small unilamellar vesicles (SUVs) and for the same lipids on silica (SiO2) nanoparticle supported lipid bilayers (NP-SLBs) as a function of ionic strength, temperature, temperature cycling, and NP size, above the main gel-to-liquid crystal phase transition temperature, Tm, using d- and h-DMPC and DPPC. Increasing ionic strength decreases the exchange kinetics for the SUVs, but more so for the NP-SLBs, due to better packing of the lipids and increased attraction between the lipid and support. When the NP-SLBs (or SUVs) are cycled above and below Tm, the exchange rate increases compared with exchange at the same temperature without cycling, for similar total times, suggesting that defects provide sites for more facile removal and thus exchange of lipids. Defects can occur: (i) at the phase boundaries between coexisting gel and fluid phases at Tm; (ii) in bare regions of exposed SiO2 that form during NP-SLB formation due to mismatched surface areas of lipid and NPs; and (iii) during cycling as the result of changes in area of the lipids at Tm and mismatched thermal expansion coefficient between the lipids and SiO2 support. Exchange rates are faster for NP-SLBs prepared with the nominal amount of lipid required to form a NP-SLB compared with NP-SLBs that have been prepared with excess lipids to minimize SiO2 patches. Nanosystems prepared with equimolar mixtures of NP-SLBs composed of d-DMPC (d(DMPC)-NP-SLB) and SUVs composed of h-DMPC (h(DMPC)-SUV) show that the calorimetric transition of the "donor" h(DMPC)-SUV decreases in intensity without an initial shift in Tm, indicating that the "acceptor" d(DMPC)-NP-SLB can accommodate more lipids, through either further fusion or insertion of lipids into the distal monolayer. Exchange for d/h(DMPC)-NP-SLB is in the order 100 nm SiO2 > 45 nm SiO2 > 5 nm SiO2.

Direct detection of the gel-fluid phase transition of a single supported phospholipid bilayer using quartz crystal microbalance with dissipation monitoring

Supported phospholipid bilayers (SPBs) are valuable models for fundamental studies of biological membranes and their interaction with biologically relevant solutes or particles. Herein, we demonstrate the capability of the quartz crystal microbalance with dissipation monitoring (QCM-D) to directly detect the gel-fluid phase transition of a SPB. The approach involves comparison of the frequency response of a bare and a bilayer-coated QCM-D crystal during linear temperature variation. Phase transition results in a change of the resonance frequency that coincides directly with the accompanied change in bilayer thickness detected by ellipsometry. Experiments performed at different heating rates further demonstrate the use of dissipation monitoring to determine the phase transition temperature based on the temperature-induced viscosity changes of the ambient medium in the immediate environment of the bilayer. Unlike other methods, the proposed approach enables precise determination of the phase transition of a SPB without the need for thermal equilibration of the measurement chamber and, thus, has great potential for sensitive detection of structural and/or compositional changes of the bilayer.

Peptide-membrane interactions of arginine-tryptophan peptides probed using quartz crystal microbalance with dissipation monitoring

Membrane-active peptides include peptides that can cross cellular membranes and deliver macromolecular cargo as well as peptides that inhibit bacterial growth. Some of these peptides can act as both transporters and antibacterial agents. It is desirable to combine the knowledge from these two different fields of membrane-active peptides into design of new peptides with tailored actions, as transporters of cargo or as antibacterial substances, targeting specific membranes. We have previously shown that the position of the amino acid tryptophan in the peptide sequence of three arginine-tryptophan peptides affects their uptake and intracellular localization in live mammalian cells, as well as their ability to inhibit bacterial growth. Here, we use quartz crystal microbalance with dissipation monitoring to assess the induced changes caused by binding of the three peptides to supported model membranes composed of POPC, POPC/POPG, POPC/POPG/cholesterol or POPC/lactosyl PE. Our results indicate that the tryptophan position in the peptide sequence affects the way these peptides interact with the different model membranes and that the presence of cholesterol in particular seems to affect the membrane interaction of the peptide with an even distribution of tryptophans in the peptide sequence. These results give mechanistic insight into the function of these peptides and may aid in the design of membrane-active peptides with specified cellular targets and actions.

Cell membrane damage and protein interaction induced by copper containing nanoparticles--importance of the metal release process

Cu-containing nanoparticles are used in various applications in order to e.g. achieve antimicrobial activities and to increase the conductivity of fluids and polymers. Several studies have reported on toxic effects of such particles but the mechanisms are not completely clear. The aim of this study was to investigate the interactions between cell membranes and well-characterized nanoparticles of CuO, Cu metal, a binary Cu-Zn alloy and micron-sized Cu metal particles. This was conducted via in vitro investigations of the effects of the nanoparticles on (i) cell membrane damage on lung epithelial cells (A549), (ii) membrane rupture of red blood cells (hemolysis), complemented by (iii) nanoparticle interaction studies with a model lipid membrane using quartz crystal microbalance with dissipation monitoring (QCM-D). The results revealed that nanoparticles of the Cu metal and the Cu-Zn alloy were both highly membrane damaging and caused a rapid (within 1h) increase in membrane damage at a particle mass dose of 20 μg/mL, whereas the CuO nanoparticles and the micron-sized Cu metal particles showed no such effect. At similar nanoparticle surface area doses, the nano and micron-sized Cu particles showed more similar effects. The commonly used LDH (lactate dehydrogenase) assay for analysis of membrane damage was found impossible to use due to nanoparticle-assay interactions. None of the particles induced any hemolytic effects on red blood cells when investigated up to high particle concentrations (1mg/mL). However, both Cu and Cu-Zn nanoparticles caused hemoglobin aggregation/precipitation, a process that would conceal a possible hemolytic effect. Studies on interactions between the nanoparticles and a model membrane using QCM-D indicated a small difference between the investigated particles. Results of this study suggest that the observed membrane damage is caused by the metal release process at the cell membrane surface and highlight differences in reactivity between metallic nanoparticles of Cu and Cu-Zn and nanoparticles of CuO.

Equilibrium-fluctuation-analysis of single liposome binding events reveals how cholesterol and Ca2+ modulate glycosphingolipid trans-interactions

Carbohydrate-carbohydrate interactions (CCIs) are of central importance for several biological processes. However, the ultra-weak nature of CCIs generates difficulties in studying this interaction, thus only little is known about CCIs. Here we present a highly sensitive equilibrium-fluctuation-analysis of single liposome binding events to supported lipid bilayers (SLBs) based on total internal reflection fluorescence (TIRF) microscopy that allows us to determine apparent kinetic rate constants of CCIs. The liposomes and SLBs both contained natural Le(x) glycosphingolipids (Galβ4(Fucα3)GlcNAcβ3Galβ4Glcβ1Cer), which were employed to mimic cell-cell contacts. The kinetic parameters of the self-interaction between Le(x)-containing liposomes and SLBs were measured and found to be modulated by bivalent cations. Even more interestingly, upon addition of cholesterol, the strength of the CCIs increases, suggesting that this interaction is strongly influenced by a cholesterol-dependent presentation and/or spatial organization of glycosphingolipids in cell membranes.

Challenges in the Development of Functional Assays of Membrane Proteins

Lipid bilayers are natural barriers of biological cells and cellular compartments. Membrane proteins integrated in biological membranes enable vital cell functions such as signal transduction and the transport of ions or small molecules. In order to determine the activity of a protein of interest at defined conditions, the membrane protein has to be integrated into artificial lipid bilayers immobilized on a surface. For the fabrication of such biosensors expertise is required in material science, surface and analytical chemistry, molecular biology and biotechnology. Specifically, techniques are needed for structuring surfaces in the micro- and nanometer scale, chemical modification and analysis, lipid bilayer formation, protein expression, purification and solubilization, and most importantly, protein integration into engineered lipid bilayers. Electrochemical and optical methods are suitable to detect membrane activity-related signals. The importance of structural knowledge to understand membrane protein function is obvious. Presently only a few structures of membrane proteins are solved at atomic resolution. Functional assays together with known structures of individual membrane proteins will contribute to a better understanding of vital biological processes occurring at biological membranes. Such assays will be utilized in the discovery of drugs, since membrane proteins are major drug targets.

Using complementary acoustic and optical techniques for quantitative monitoring of biomolecular adsorption at interfaces

The great wealth of different surface sensitive techniques used in biosensing, most of which claim to measure adsorbed mass, can at first glance look unnecessary. However, with each technique relying on a different transducer principle there is something to be gained from a comparison. In this tutorial review, different optical and acoustic evanescent techniques are used to illustrate how an understanding of the transducer principle of each technique can be exploited for further interpretation of hydrated and extended polymer and biological films. Some of the most commonly used surface sensitive biosensor techniques (quartz crystal microbalance, optical waveguide spectroscopy and surface plasmon resonance) are briefly described and five case studies are presented to illustrate how different biosensing techniques can and often should be combined. The case studies deal with representative examples of adsorption of protein films, polymer brushes and lipid membranes, and describe e.g., how to deal with strongly vs. weakly hydrated films, large conformational changes and ordered layers of biomolecules. The presented systems and methods are compared to other representative examples from the increasing literature on the subject.

Graphene oxide and lipid membranes: interactions and nanocomposite structures

We have investigated the interaction between graphene oxide and lipid membranes, using both supported lipid membranes and supported liposomes. Also, the reverse situation, where a surface coated with graphene oxide was exposed to liposomes in solution, was studied. We discovered graphene oxide-induced rupture of preadsorbed liposomes and the formation of a nanocomposite, bio-nonbio multilayer structure, consisting of alternating graphene oxide monolayers and lipid membranes. The assembly process was monitored in real time by two complementary surface analytical techniques (the quartz crystal microbalance with dissipation monitoring technique (QCM-D) and dual polarization interferometry (DPI)), and the formed structures were imaged with atomic force microscopy (AFM). From a basic science point of view, the results point toward the importance of electrostatic interactions between graphene oxide and lipid headgroups. Implications from a more practical point of view concern structure-activity relationship for biological health/safety aspects of graphene oxide and the potential of the nanocomposite, multilayer structure as scaffolds for advanced biomolecular functions and sensing applications.

Lipid exchange between membranes: effects of membrane surface charge, composition, and curvature

Intermembrane lipid exchange is critical to membrane functions and pharmaceutical applications. The exchange process is not fully understood and it is explored by quartz crystal microbalance with dissipation monitor method in this research. It is found that intermembrane lipid exchange is accelerated with the decrease of vesicle size and the increase of charge and liquid crystalline lipid composition ratio. Vesicle adsorption rate, membrane lateral pressure gradient, and lipid lateral diffusion coefficient are inferred to be critical in deciding the lipid exchange kinetics between membranes. Besides that, the membrane contact situation during lipid exchange is also studied. The maximum total membrane contact area is found to increase with the decrease of vesicle size, charged and liquid crystalline lipid composition ratio. A competition mechanism between the vesicle adsorption rate and the intermembrane lipid exchange rate was proposed to control the maximum total membrane contact area.

Structural and functional dynamics of an integral membrane protein complex modulated by lipid headgroup charge

We have used membrane surface charge to modulate the structural dynamics of an integral membrane protein, phospholamban (PLB), and thereby its functional inhibition of the sarcoplasmic reticulum Ca-ATPase (SERCA). It was previously shown by electron paramagnetic resonance, in vesicles of neutral lipids, that the PLB cytoplasmic domain is in equilibrium between an ordered T state and a dynamically disordered R state and that phosphorylation of PLB increases the R state and relieves SERCA inhibition, suggesting that R is less inhibitory. Here, we sought to control the T/R equilibrium by an alternative means-varying the lipid headgroup charge, thus perturbing the electrostatic interaction of PLB's cationic cytoplasmic domain with the membrane surface. We resolved the T and R states not only by electron paramagnetic resonance in the absence of SERCA but also by time-resolved fluorescence resonance energy transfer from SERCA to PLB, thus probing directly the SERCA-PLB complex. Compared to neutral lipids, anionic lipids increased both the T population and SERCA inhibition, while cationic lipids had the opposite effects. In contrast to conventional models, decreased inhibition was not accompanied by decreased binding. We conclude that PLB binds to SERCA in two distinct structural states of the cytoplasmic domain: an inhibitory T state that interacts strongly with the membrane surface and a less inhibitory R state that interacts more strongly with the anionic SERCA cytoplasmic domain. Modulating membrane surface charge provides an effective way of investigating the correlation between structural dynamics and function of integral membrane proteins.

Preparation of supported lipid membranes for aquaporin Z incorporation

There has been a recent surge of interest to mimic the performance of natural cellular membranes by incorporating water channel proteins-aquaporins (AQPs) into various ultrathin films for water filtration applications. To make biomimetic membranes one of the most crucial steps is preparing a defect-free platform for AQPs incorporation on a suitable substrate. In this study two methods were used to prepare supported lipid membranes on NF membrane surfaces under a benign pH condition of 7.8. One method was direct vesicle fusion on a hydrophilic membrane NF-270; the other was vesicle fusion facilitated by hydraulic pressure on a modified hydrophilic NF-270 membrane whose surface has been spin-coated with positively charged lipids. Experiments revealed that the supported lipid membrane without AQPs prepared by the spin coating plus vesicle fusion had a much lower defect density than that prepared by vesicle fusion alone. It appears that the surface roughness and charge are the main factors determining the quality of the supported lipid membrane. Aquaporin Z (AqpZ) proteins were successfully incorporated into 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) liposomes and its permeability was measured by the stopped-flow experimental procedure. However, after the proteoliposomes have been fused onto the modified substrate, the AqpZ function in the resultant membrane was not observed and AFM images showed distinct aggregations of unfused proteoliposomes or AqpZ proteins on the substrate surface. It is speculated that the inhibition of AqpZ function may be caused by the low lipid mobility on the NF membrane surface. Further investigations to evaluate and optimize the structure-performance relationship are required.

Imaging of blood plasma coagulation at supported lipid membranes

The blood coagulation system relies on lipid membrane constituents to act as regulators of the coagulation process upon vascular trauma, and in particular the 2D configuration of the lipid membranes is known to efficiently catalyze enzymatic activity of blood coagulation factors. This work demonstrates a new application of a recently developed methodology to study blood coagulation at lipid membrane interfaces with the use of imaging technology. Lipid membranes with varied net charges were formed on silica supports by systematically using different combinations of lipids where neutral phosphocholine (PC) lipids were mixed with phospholipids having either positively charged ethylphosphocholine (EPC), or negatively charged phosphatidylserine (PS) headgroups. Coagulation imaging demonstrated that negatively charged SiO(2) and membrane surfaces exposing PS (obtained from liposomes containing 30% of PS) had coagulation times which were significantly shorter than those for plain PC membranes and EPC exposing membrane surfaces (obtained from liposomes containing 30% of EPC). Coagulation times decreased non-linearly with increasing negative surface charge for lipid membranes. A threshold value for shorter coagulation times was observed below a PS content of ∼6%. We conclude that the lipid membranes on solid support studied with the imaging setup as presented in this study offers a flexible and non-expensive solution for coagulation studies at biological membranes. It will be interesting to extend the present study towards examining coagulation on more complex lipid-based model systems.

Formation of supported lipid bilayers at surfaces with controlled curvatures: influence of lipid charge

We have developed and characterized novel biomimetic membranes, formed at nanostructured sensor substrates with controlled curvatures, motivated by the many biological processes that involve membrane curvature. Model systems with convex nanostructures, with radii of curvatures (ROCs) of 70, 75, and 95 nm, were fabricated utilizing colloidal assembly and used as substrates for supported lipid bilayers (SLBs). The SLBs were formed via vesicle adsorption and rupture, and the vesicle deposition pathway was studied by means of quartz crystal microbalance with dissipation (QCM-D) and fluorescence microscopy. SLBs conforming to the underlying nanostructured surfaces, which exhibit increased surface area with decreased ROC, were confirmed from excess mass, monitored by QCM-D, and excess total fluorescence intensities. The formation of SLBs at the nanostructured surfaces was possible, however, depending on the ROC of the structures and the lipid vesicle charge the quality varied. The presence of nanostructures was shown to impair vesicle rupture and SLB formation was progressively hindered at surfaces with structures of decreasing ROCs. The introduction of a fraction of the positively charged lipid POEPC in the lipid vesicle membrane allowed for good quality and conformal bilayers at all surfaces. Alternatively, for vesicles formed from lipid mixtures with a fraction of the negatively charged lipid POPS, SLB formation was not at all possible at surfaces with the lowest ROC. Interestingly, the vesicle adsorption rate and the SLB formation were faster at surfaces with nanostructures of progressively smaller ROCs at high ratios of POPS in the vesicles. Development of templated SLBs with controlled curvatures provides a new experimental platform, especially at the nanoscale, at which membrane events such as lipid sorting, phase separation, and protein binding can be studied.

Hybrid nanoparticle-liposome detection of phospholipase activity

A flexible nanoparticle-based phospholipase (PL) assay is demonstrated in which the enzymatic substrate is decoupled from the nanoparticle surface. Liposomes are loaded with a polypeptide that is designed to heteroassociate with a second polypeptide immobilized on gold nanoparticles. Release of this polypeptide from the liposomes, triggered by PL, induces a folding-dependent nanoparticle bridging aggregation. The colorimetric response from this aggregation enables straightforward and continuous detection of PL in the picomolar range. The speed, specificity, and flexibility of this assay make it appropriate for a range of applications, from point of care diagnostics to high-throughput pharmaceutical screening.

pH-driven assembly of various supported lipid platforms: a comparative study on silicon oxide and titanium oxide

Supported lipid platforms are versatile cell membrane mimics whose structural properties can be tailored to suit the application of interest. By identifying parameters that control the self-assembly of these platforms, there is potential to develop advanced biomimetic systems that overcome the surface specificity of lipid vesicle interactions under physiological conditions. In this work, we investigated the adsorption kinetics of vesicles onto silicon and titanium oxides as a function of pH. On each substrate, a planar bilayer and a layer of intact vesicles could be self-assembled in a pH-dependent manner, demonstrating the role of surface charge density in the self-assembly process. Under acidic pH conditions where both zwitterionic lipid vesicles and the oxide films possess near-neutral electric surface charges, vesicle rupture could occur, demonstrating that the process is driven by nonelectrostatic interactions. However, we observed that the initial rupturing process is insufficient for propagating bilayer formation. The role of electrostatic interactions for propagating bilayer formation differs for the two substrates; electrostatic attraction between vesicles and the substrate is necessary for complete bilayer formation on titanium oxide but is not necessary on silicon oxide. Conversely, in the high pH regime, repulsive electrostatic interactions can result in the irreversible adsorption of intact vesicles on silicon oxide and even a reversibly adsorbed vesicle layer on titanium oxide. Together, the results show that pH is an effective tool to modulate vesicle-substrate interactions in order to create various self-assembled lipid platforms on hydrophilic substrates.

Fabrication of a planar zwitterionic lipid bilayer on titanium oxide

There is great demand to fabricate planar phospholipid bilayers on biocompatible materials. The preferred method of forming bilayers on these substrates is the spontaneous adsorption and rupture of phospholipid vesicles. However, in the case of titanium oxide, model vesicles composed solely of zwitterionic phospholipids do not follow this self-assembly pathway under physiological conditions, prompting the use of complex bilayer materials and less-facile methods. Herein, we report a novel pH-based strategy for fabricating zwitterionic bilayers on titanium oxide in a simple and robust manner. Depending on the pH conditions under which lipid vesicles adsorb onto titanium oxide, quartz crystal microbalance-dissipation (QCM-D) monitoring demonstrated that the self-assembly pathway can in fact result in planar bilayer formation. The pH of the solution could then be adjusted to physiological levels with no effect on the mass and viscoelastic properties of the bilayer. Moreover, fluorescence recovery after photobleaching (FRAP) measurements indicated a high degree of lateral lipid diffusivity within the bilayer at physiological pH, commensurate with its role as a cell membrane mimic. Compared to existing protocols, this strategy permits the fabrication of a more diverse array of planar bilayers on titanium oxide by tuning the self-assembly pathway of lipid vesicle adsorption onto solid substrates.

Zirconium ion mediated formation of liposome multilayers

Phospholipid vesicles have attracted considerable interest as a platform for a variety of biomolecular binding assays, especially in the area of membrane protein sensing. The development of liposome-based biosensors widely relies on the availability of simple and efficient protocols for their surface immobilization. We present a novel approach toward the creation of three-dimensional phospholipid vesicle constructs using multivalent zirconium ions as linkers between the liposomes. Such three-dimensional sensing platforms are likely to play a key role in the development of biosensing devices with increased loading capacity and sensitivity. After demonstrating the affinity of Zr(4+) toward the phospholipids, we formed vesicle multilayers by sequential injections of solutions containing either liposomes or ZrOCl(2). In situ adlayer characterization was carried out by optical waveguide lightmode spectroscopy (OWLS) and quartz crystal microbalance with dissipation (QCM-D) measurements while imaging was performed by atomic force microscopy (AFM) and fluorescence microscopy. Multilayers were successfully constructed, and as demonstrated in a model fluorescence-based biomolecular binding assay, the sensor's loading capacity was increased. Furthermore, we observed that lipid exchange between the vesicles is promoted in the presence of Zr(4+) and that addition of a phosphate-containing buffer leads to adlayer loosening and creation of lipidic tubular structures. The approach presented here could be applied to the study of membrane proteins in a highly sensitive manner due to the increased surface area or to produce functional coatings for controlled drug release and host response.

Interfacial binding dynamics of bee venom phospholipase A2 investigated by dynamic light scattering and quartz crystal microbalance

Bee venom phospholipase A(2) (bvPLA(2)) is part of the secretory phospholipase A(2) (sPLA(2)) family whose members are active in biological processes such as signal transduction and lipid metabolism. While controlling sPLA(2) activity is of pharmaceutical interest, the relationship between their mechanistic actions and physiological functions is not well understood. Therefore, we investigated the interfacial binding process of bvPLA(2) to characterize its biophysical properties and gain insight into how membrane binding affects interfacial activation. Attention was focused on the role of membrane electrostatics in the binding process. Although dynamic light scattering experiments indicated that bvPLA(2) does not lyse lipid vesicles, a novel, nonhydrolytic activity was discovered. We employed a supported lipid bilayer platform on the quartz crystal microbalance with dissipation sensor to characterize this bilayer-disrupting behavior and determined that membrane electrostatics influence this activity. The data suggest that (1) adsorption of bvPLA(2) to model membranes is not primarily driven by electrostatic interactions; (2) lipid desorption can follow bvPLA(2) adsorption, resulting in nonhydrolytic bilayer-disruption; and (3) this desorption is driven by electrostatic interactions. Taken together, these findings provide evidence that interfacial binding of bvPLA(2) is a dynamic process, shedding light on how membrane electrostatics can modulate interfacial activation.

Simulations of lipid transfer between a supported lipid bilayer and adsorbing vesicles

Recent experiments demonstrate transfer of lipid molecules between a charged, supported lipid membrane (SLB) and vesicles of opposite charge when the latter adsorb on the SLB. A simple phenomenological bead model has been developed to simulate this process. Beads were defined to be of three types, 'n', 'p', and '0', representing POPS (negatively charged), POEPC (positively charged), and POPC (neutral but zwitterionic) lipids, respectively. Phenomenological bead-bead interaction potentials and lipid transfer rate constants were used to account for the overall interaction and transfer kinetics. Using different bead mixtures in both the adsorbing vesicle and in the SLB (representing differently composed/charged vesicles and SLBs as in the reported experiments), we clarify under which circumstances a vesicle adsorbs to the SLB, and whether it, after lipid transfer and changed composition of the SLB and vesicle, desorbs back to the bulk again or not. With this model we can reproduce and provide a conceptual picture for the experimental findings.

Influence of lipid vesicle composition and surface charge density on vesicle adsorption events: a kinetic phase diagram

Lipid vesicle adsorption on a solid surface, from a bulk liquid solution, results in different final situations on the surface depending on the vesicles' composition, properties of the solution (pH, ion types, and concentration), and surface properties. The main alternative outcomes of the adsorption event are (i) a lipid bilayer with vesicle rupture immediately upon the adsorption event or (ii) bilayer formation only at and after a critical vesicle coverage, (iii) adsorption of intact vesicles, or (iv) repulsion (no adsorption). We have simulated these different events for the case of vesicles consisting of pure neutral (zwitterionic) lipids and mixtures of neutral and positive or negative lipids, keeping the bulk conditions fixed, and have compiled the different resulting lipid structures on the surface as a function of vesicle composition and surface charge density, in a kinetic phase diagram.