Self-assembled monolayers of bisphosphonates: influence of side chain steric hindrance

Organic-Inorganic Biocompatible Coatings for Temporary and Permanent Metal Implants

The general trend of increasing life expectancy will consistently drive the demand for orthopedic prostheses. In addition to the elderly, the younger population is also in urgent need of orthopedic devices, as bone fractures are a relatively common injury type; it is important to treat the patient quickly, painlessly, and eliminate further health complications. In the field of traumatology and orthopedics, metals and their alloys are currently the most commonly used materials. In this context, numerous scientists are engaged in the search for new implant materials and coatings. Among the various coating techniques, plasma electrolytic oxidation (PEO) (or micro-arc oxidation-MAO) occupy a distinct position. This method offers a cost-effective and environmentally friendly approach to modification of metal surfaces. PEO can effectively form porous, corrosion-resistant, and bioactive coatings on light alloys. The porous oxide surface structure welcomes organic molecules that can significantly enhance the corrosion resistance of the implant and improve the biological response of the body. The review considers the most crucial aspects of new combined PEO-organic coatings on metal implants, in terms of their potential for implantation, corrosion resistance, and biological activity in vitro and in vivo.

Modeling of Biological Activity of PEO-Coated Titanium Implants with Conjugates of Cyclic RGD Peptide with Amino Acid Bisphosphonates

Titanium is considered to be the most essential metal in the field of implantology. The main factors determining metal biocompatibility, among others, include the morphology and chemical composition of the titanium surface. Therefore, the aim of this work was to develop approaches to control the biological activity of the titanium surface by creating coatings that combine both an inorganic phase with a given morphology and organic molecules containing an integrin-selective peptide that regulate cell adhesion and proliferation. As such, we synthesized new c(RGDfC) derivatives of amino acid bisphosphonates (four examples) with different bisphosphonate anchors and maleimide linkers. These molecules were deposited on a highly developed porous surface obtained via the plasma electrolytic oxidation (PEO) of coarse-grained and nanostructured titanium. In vitro studies demonstrated the increase in the viability degree of mesenchymal stem cells and fibroblasts on the surface of coarse-grained or nanostructured titanium modified with PEO and a c(RGDfC) derivative of ε-aminocaproic acid bisphophonate with an SMCC linker. As a result, the use of conjugates of amino acid bisphosphonates with a cyclic RGD peptide for the modification of PEO-coated titanium opens the ways for the effective control of the biological activity of the metal implant surface.

Unraveling the influence of substrate on the growth rate, morphology and covalent structure of surface adherent polydopamine films

Polydopamine (PDA), also known as synthetic melanin, is widely used as a biomimetic anchoring layer for the modification of various solid substrates. PDA is utilized for a wide range of biomedical, sensing and tribological applications, even though the polymer's precise covalent structure has not been completely revealed yet. Even more, it is not evident to which extent the chemical nature of the substrate, on which the layer is formed, influences and predetermines the covalent structure of resulting PDA. In this contribution, we have studied the growth of PDA using various surface-sensitive techniques such as spectroscopic ellipsometry, atomic force microscopy and X-ray photoelectron spectroscopy. We supplemented grazing angle attenuated total reflection FTIR spectroscopy with multivariate statistical analysis to further gain analytical power. We have particularly focused on the effects of polymerization time and substrate on the PDA structure. We found notable differences in the chemical composition of PDA formed on gold and on surfaces terminated with oxides/reactive hydroxides such as silicon and N-dopped-TiO₂ in the early stages of the layer formation. At the later stages of layer formation, a merely unified chemical structure was observed independently on the type of substrate.

Biocompatible Organic Coatings Based on Bisphosphonic Acid RGD-Derivatives for PEO-Modified Titanium Implants

Currently, significant attention is attracted to the problem of the development of the specific architecture and composition of the surface layer in order to control the biocompatibility of implants made of titanium and its alloys. The titanium surface properties can be tuned both by creating an inorganic sublayer with the desired morphology and by organic top coating contributing to bioactivity. In this work, we developed a composite biologically active coatings based on hybrid molecules obtained by chemical cross-linking of amino acid bisphosphonates with a linear tripeptide RGD, in combination with inorganic porous sublayer created on titanium by plasma electrolytic oxidation (PEO). After the addition of organic molecules, the PEO coated surface gets nobler, but corrosion currents increase. In vitro studies on proliferation and viability of fibroblasts, mesenchymal stem cells and osteoblast-like cells showed the significant dependence of the molecule bioactivity on the structure of bisphosphonate anchor and the linker. Several RGD-modified bisphosphonates of β-alanine, γ-aminobutyric and ε-aminocaproic acids with BMPS or SMCC linkers can be recommended as promising candidates for further in vivo research.

Close contacts at the interface: Experimental-computational synergies for solving complexity problems

The study of material science has been long devoted to the disentanglement of bulk structures which mainly entails finding the inner structure of materials. That structure is accountable for a major portion of materials’ properties. Yet, as our knowledge of these “backbones” enlarged so did the interest for the materials’ boundaries properties which means the properties at the frontier with the surrounding environment that is called interface. The interface is thus to be understood as the sum of the material’s surface plus the surrounding environment be it in solid, liquid or gas phase. The study of phenomena at this interface requires both the use of experimental and theoretical techniques and, above all, a wise combination of them in order to shed light over the most intimate details at atomic, molecular and mesostructure levels. Here, we report several cases to be used as proof of concept of the results achieved when studying interface phenomena by combining a myriad of experimental and theoretical tools to overcome the usual limitation regardind  atomic detail, size and time scales and systems of complex composition. Real world examples of the combined experimental-theoretical work and new tools, software, is offered to the readers.

Self-Assembled Monolayers for Dental Implants

Implant-based therapy is a mature approach to recover the health conditions of patients affected by edentulism. Thousands of dental implants are placed each year since their introduction in the 80s. However, implantology faces challenges that require more research strategies such as new support therapies for a world population with a continuous increase of life expectancy, to control periodontal status and new bioactive surfaces for implants. The present review is focused on self-assembled monolayers (SAMs) for dental implant materials as a nanoscale-processing approach to modify titanium surfaces. SAMs represent an easy, accurate, and precise approach to modify surface properties. These are stable, well-defined, and well-organized organic structures that allow to control the chemical properties of the interface at the molecular scale. The ability to control the composition and properties of SAMs precisely through synthesis (i.e., the synthetic chemistry of organic compounds with a wide range of functional groups is well established and in general very simple, being commercially available), combined with the simple methods to pattern their functional groups on complex geometry appliances, makes them a good system for fundamental studies regarding the interaction between surfaces, proteins, and cells, as well as to engineering surfaces in order to develop new biomaterials.

Immobilization of alendronate on titanium via its different functional groups and the subsequent effects on cell functions

Immobilization of alendronate on orthopedic implants offers the possibility of enhancing osteogenesis without potentially adverse effects associated with systemic administration of this drug. In this work, alendronate was immobilized on titanium (Ti) via either its phosphate (Method 1) or amino (Method 2) groups, and responses of osteoblasts and human mesenchymal stem cells (hMSCs) on these surfaces were investigated. These modified substrates have similar surface roughness and are negatively charged. With similar amounts of immobilized alendronate, these two types of modified substrates showed comparable osteogenic stimulating effects in enhancing osteoblasts' alkaline phosphatase (ALP) activity and calcium deposition for the first 10days. However, alendronate immobilized via its phosphate groups was less stable, and gradually leached into the medium. As a result, its stimulating effect on osteoblast differentiation diminished with time. On the other hand, alendronate immobilized via its amino group stimulated osteoblast differentiation over 21days, and with 1655ng/cm2 of immobilized alendronate on the Ti substrate, calcium deposition by osteoblasts and hMSCs increased by 30% and 69%, respectively, compared to pristine Ti after 21days. The expressions of runt-related transcription factor 2, osterix, osteopontin and osteocalcin in hMSCs cultured on this substrate were monitored. The up-regulation of these genes is postulated to play a role in the acceleration of osteogenic differentiation of hMSCs cultured on the alendronate-modified substrate over those on pristine Ti.

1,4-Bis{5-[bis(propan-2-yloxy)phosphoryl]thiophen-2-yl}-2,5-dipropoxybenzene

The title compound, C32H48O8P2S2, was prepared by the nickel-catalyzed reaction of bis(5-bromothienyl)dipropoxybenzene and triisopropyl phosphite. The thiophene rings are inclined to the benzene ring by 14.6 (2) and 25.3 (3)°. One propyloxy group is disordered. Four hydrogen bonds connect the molecules, which are arranged in ribbons parallel to thebcplane.

Structure and Long-Term Stability of Alkylphosphonic Acid Monolayers on SS316L Stainless Steel

Surface modification of stainless steel (SS316L) to improve surface properties or durability is an important avenue of research, as SS316L is widely used in industry and science. We studied, therefore, the formation and stability of a series of organic monolayers on SS316L under industrially relevant conditions. These included acidic (pH 3), basic (pH 11), neutral (Milli-Q water), and physiological conditions [10 mM phosphate-buffered saline (PBS)], as well as dry heating (120 °C). SS316L was modified with alkylphosphonic acids of chain length (CH2)n with n varying between 3 and 18. While alkylphosphonic acids of all chain lengths formed self-assembled monolayers with hydrophobic properties, only monolayers of chain lengths 12-18 formed ordered monolayers, as evidenced by static water contact angle (SCA), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and infrared reflection absorption spectroscopy (IRRAS). A long-term stability study revealed the excellent stability of monolayers with chain lengths 12-18 for up to 30 days in acid, neutral, and physiological solutions, and for up to 7 days under dry heating. Under strong basic conditions a partial breakdown of the monolayer was observed, especially for the shorter chain lengths. Finally, the effect of multivalent surface attachment on monolayer stability was explored by means of a series of divalent bisphosphonic acids.

Experimental evidence of ultrathin polymer film stratification by AFM force spectroscopy

By performing Atomic Force Microscopy measurements of pull-off force as a function of the temperature, we were able to probe the dynamic of supported thin polystyrene (PS) films. Thermal transitions induce modifications in the surface energy, roughness and surface modulus that are clearly detected by AFM and related to PS chain relaxation mechanisms. We demonstrated the existence of three transition temperatures that can be associated to the relaxation of polymer chains located at different depth regions within the polymer film. Independently of the film thickness, we have confirmed the presence of a region of high mobility for the polymer chains at the free interface. The thickness of this region is estimated to be above 7nm. The detection of a transition only present for film thicker than the gyration radius Rg is linked to the dynamics of polymer chains in a bulk conformation (i.e. not in contact with the free interface). We claim here that our results demonstrate, in agreement with other techniques, the stratification of thin polymer film depth profile in terms of relaxation behavior.

Self-assembled anchor layers/polysaccharide coatings on titanium surfaces: a study of functionalization and stability

Composite materials based on a titanium support and a thin, alginate hydrogel could be used in bone tissue engineering as a scaffold material that provides biologically active molecules. The main objective of this contribution is to characterize the activation and the functionalization of titanium surfaces by the covalent immobilization of anchoring layers of self-assembled bisphosphonate neridronate monolayers and polymer films of 3-aminopropyltriethoxysilane and biomimetic poly(dopamine). These were further used to bind a bio-functional alginate coating. The success of the titanium surface activation, anchoring layer formation and alginate immobilization, as well as the stability upon immersion under physiological-like conditions, are demonstrated by different surface sensitive techniques such as spectroscopic ellipsometry, infrared reflection-absorption spectroscopy and X-ray photoelectron spectroscopy. The changes in morphology and the established continuity of the layers are examined by scanning electron microscopy, surface profilometry and atomic force microscopy. The changes in hydrophilicity after each modification step are further examined by contact angle goniometry.

Hydrolytic stability of mesoporous zirconium titanate frameworks containing coordinating organic functionalities

The hydrolytic stability of lanthanide and actinide selective mono- and polyphosphonate-functionalized mesoporous zirconium titanium oxide adsorbents has been investigated in nitric acid solutions. Hydrolytic degradation of the surfaces, as measured through the fractional loss of phosphorus and elements of the oxide framework, increased by more than an order of magnitude as the nitric acid concentration was increased from 0 to 2 mol/L. The unfunctionalized parent oxide suffered considerable dissolution in 2 mol/L acid over a period of 72 h. Under identical conditions, the fractional Zr and Ti release was reduced to 1 × 10(-2) for monophosphonate functionalized hybrids and reached as low as 1 × 10(-6) for trisphosphonate functionalized variants. The bisphosphonates showed intermediate values. The leaching of P, Zr and Ti was found to be incongruent with the Zr leaching to a lesser extent implying enhanced stability of the Zr-O-P bond. Quantitative analysis of the dissolution kinetics indicated a parabolic dissolution model with a rate constant in the range of 0.5-1.5 mg g(-1) min(-1/2) for the elemental leaching of P, Ti, and Zr. The leaching of Zr from the mesoporous matrix was relatively more complex than for the other elements with evidence of a leaching mechanism involving two processes. ToF-SIMS and DRIFT analysis demonstrated that after leaching in 2 M HNO3 for 24 h, a significant proportion of grafted ligands remained on the surface. The oxide functionalized with amino trismethylenephosphonic acid, which had previously shown excellent (153)Gd(3+) selectivity, was demonstrated to have outstanding stability, with low fractional elemental losses and preservation of mesoporous texture even after leaching for 24 h in 2 M HNO3. This suggests this particular hybrid to be worthy of additional study.

Simple preparation and application of TEMPO-coated Fe(3)O(4) superparamagnetic nanoparticles for selective oxidation of alcohols

The organic oxidant TEMPO (2,2,4,4-tetramethylpiperdine-1-oxyl) was immobilized on iron oxide (Fe(3)O(4)) superparamagnetic nanoparticles by employing strong metal-oxide chelating phosphonates and azide/alkyne "click" chemistry. This simple preparation yields recyclable TEMPO-coated nanoparticles with good TEMPO loadings. They have excellent magnetic response and efficiently catalyze the oxidation of a wide range of primary and secondary alcohols to aldehydes, ketones, and lactones under either aerobic acidic Mn(II)/Cu(II) oxidizing Minisci conditions, or basic NaOCl Anelli conditions. The nanoparticles could be recycled more than 20 times under the Minisci conditions and up to eight times under the Anelli conditions with good to excellent substrate conversions and product selectivities. Immobilization of the catalyst through a phosphonate linkage allows the particles to withstand acidic oxidizing environments with minimal catalyst leaching. Clicking TEMPO to the phosphonate prior to phosphonate immobilization, rather than after, ensures the clicked catalyst is the only species on the particle surface. This facilitates quantification of the catalyst loading. The stability of the phosphonate linker and simplicity of this catalyst immobilization method make this an attractive approach for tethering catalysts to oxide supports, creating magnetically separable catalysts that can be used under neutral or acidic conditions.

Structure and conformation of methyl-terminated poly(ethylene oxide)-bis[methylenephosphonate] ligands adsorbed to boehmite (AlOOH) from aqueous solutions. Attenuated total reflection infrared (ATR-IR) spectra and dynamic contact angles

A ligand with a bisphosphonate headgroup and methyl-terminated poly(ethylene oxide) 550 tail has been adsorbed to a boehmite (AlOOH) particle film from aqueous solutions at 9, 18, 26, and 40 degrees C with a range of coverages. In situ attenuated total reflectance infrared (ATR-IR) spectra of the PEO-modified boehmite particle films has been used to monitor surface coverage. PEO-related IR absorptions showed variation in band shape with coverage and temperature which reflect changes in the configuration and crowding of PEO ligand tails. The integrated absorbance of PEO-related absorptions arising from CH(2) wagging and twisting vibrations indicated the average conformation about the C-C and C-O bonds. At all values of coverage and temperature, the PEO tails of the PEO-phosphonate ligands were found to have a predominantly gauche conformation about C-C bonds and a predominantly trans conformation about C-O bonds. The proportion of PEO with this predominant configuration, termed TGT, was found to vary with coverage and temperature and was most prevalent for PEO-modified boehmite surfaces with a ligand coverage of approximately 0.95 at 18 degrees C. Dynamic water contact angle measurements showed that PEO-modified surfaces with the greatest proportion of PEO in the TGT configuration were also the most hydrophilic, thus indicating that PEO in the TGT configuration was more hydrated or polar than other configurations. Variation in the proportion of PEO in the TGT configuration with temperature and coverage have been used to explain the variable resistance to protein adhesion reported for PEO-modified surfaces. Factors influencing the configuration of surface-bound PEO with changes in ligand coverage and temperature have been discussed.

Synthesis and photochemistry of coumarin-based self-assembled monolayers on silicon oxide surfaces

In this study, we report on a system consisting of self-assembled monolayers (SAMs) formed by 7-(11-trichlorosilylundecyloxy)coumarin on mica and on quartz glass. For the first time, in the absence of an inert atmosphere or a stabilizing matrix, we demonstrate by means of absorption and fluorescence spectroscopy that the photochemical cycloaddition of coumarin head groups is completely reversible in SAMs. Photodimerization and photocleavage were monitored for five cycles of alternating irradiation with light of wavelengths 355 and 254 nm, respectively. SAM formation was analyzed using atomic force microscopy and contact angle measurements. The quantum yield of the single photon absorption induced photocleavage of coumarin dimers in a SAM was determined to be Phi = 0.29. Asymmetrical photocleavage after lactone ring-opening of the coumarin dimer SAM causes a change in contact angle from about 70 degrees to about 55 degrees. This may be observed, for example, as a significant change in surface wettability.