The preparation of sugar polymer-coated nanocapsules by the layer-by-layer deposition on the liposome

Unveiling the potential of chitosan-coated lipid nanoparticles in drug delivery for management of critical illness: a review

Chitosan (CT), a natural, cationic, chemically stable molecule, biocompatible, biodegradable, nontoxic, polysaccharide derived from the deacetylation of chitin, has very uniquely surfaced as a material of promise for drug delivery and biomedical applications. For the oral, ocular, cutaneous, pulmonary, and nose-to-brain routes, CT-coated nanoparticles (CTCNPs) have numerous advantages, consisting of improved controlled drug release, physicochemical stability, improved cell and tissue interactions, and increased bioavailability and efficacy of the active ingredient. CTCNPs have a broad range of therapeutic properties including anticancer, antiviral, antifungal, anti-inflammatory, antibacterial properties, treating neurological disorders, and other diseases. This has led to substantial research into the many potential uses of CT as a drug delivery vehicle. CT has also been employed in a wide range of biomedical processes, including bone and cartilage tissue regeneration, ocular tissue regeneration, periodontal tissue regeneration, heart tissue regeneration, and wound healing. Additionally, CT has been used in cosmeceutical, bioimaging, immunization, and gene transfer applications. CT exhibits a number of biological activities, which are the basis for its remarkable potential for use as a drug delivery vehicle, and these activities are covered in detail in this article. The alterations applied to CT to obtain the necessary properties have been described.

Chitosan-coated nanoparticles in innovative cancer bio-medicine

In the recent decade, nanoparticles (NPs) have had enormous implications in cancer biomedicine, including research, diagnosis, and therapy. However, their broad application still faces obstacles due to some practical limitations and requires further development. Recently, there has been more interest in the coated class of nanoparticles to address those challenges. Chitosan-coated NPs are simple to produce, biodegradable, biocompatible, exhibit antibacterial activity, and have less cytotoxicity. This study provides an updated and comprehensive overview of the application of chitosan-coated NPs as a promising class of NPs in cancer biomedicine. Additionally, we discussed chitosan-coated lipid, metal, and polymer-based nanoparticles in biomedical applications. Furthermore, different coating methods and production/characterization procedures were reviewed. Moreover, the biological and physicochemical advantages of chitosan-coated NPs, including facilitated controlled release, greater physicochemical stability, improved cell/tissue interaction, and enhanced bioavailability of medications, were highlighted. Finally, the prospects of chitosan-coated NPs in cancer biomedicine were discussed.

The Designing of a Gel Formulation with Chitosan Polymer Using Liposomes as Nanocarriers of Amphotericin B for a Non-invasive Treatment Model of Cutaneous Leishmaniasis

PURPOSE

Leishmaniasis is a disease caused by different Leishmania spp., which are transmitted to humans by a bite of infected female sand flies. Cutaneous leishmaniasis (CL, oriental sore), visceral leishmaniasis (VL), and mucocutaneous leishmaniasis (MCL) are three main clinical forms, however, only CL and VL are seen in Turkey. Cutaneous leishmaniasis is characterized by skin lesion(s) and is one of the most important vector-borne diseases in Turkey with over 2000 cases reported annually in 40 out of 81 provinces. The treatment is usually made invasively and painfully by intralesional injection of pentavalent antimony compounds. Non-invasive and innovative treatment methods are needed as aimed in this study.

METHODS

In the present study, one of the classical antileishmanial drugs, amphotericin B (AmB), encapsulated in liposomes was evaluated using non-invasive design based on chitosan, which is a nontoxic, biocompatible and biodegradable polymer. To avoid the invasive effect of conventional intralesional needle application, the drug was encapsulated in liposomes and incorporated into a chitosan gel for applying topically on the skin lesion. The efficacy of encapsulation of amphotericin B into liposomes and the drug release from liposomes were studied. The chitosan gel was evaluated for viscosity, flowability, appearance and pH. The efficacy of the drug embedded into chitosan gel, liposomal AmB alone and chitosan gel alone in four different concentrations was also tested using Leishmania spp. promastigotes in vitro.

RESULTS

The findings have shown that AmB was encapsulated into the liposomes with high efficiency (86.6%) and long-term physical and chemical stability. Therefore, designed liposomal formulation was suitable for sustained release. The appearance of the drug-embedded chitosan gel was transparent and appropriate. Chitosan gels showed non- Newtonian behavior and plastic flow. The liposomal AmB also showed higher efficacy with no parasites in all concentrations while drug embedded into chitosan gel and chitosan gel alone were effective in two higher concentrations. The lower efficacy of the drug-embedded chitosan gel in 24 h in in-vitro study was probably due to slow release of the drug.

CONCLUSION

The gel design created in this study will provide ease of use for the lesions of CL patients that do not have a specific number, size, and shape. Follow-up studies by the ex-vivo macrophage infection model with Leishmania intracellular amastigote forms and Leishmania-infected animal models are needed to understand the present design's efficacy better.

Polymer-Modified Liposomes for Drug Delivery: From Fundamentals to Applications

Liposomes are highly advantageous platforms for drug delivery. To improve the colloidal stability and avoid rapid uptake by the mononuclear phagocytic system of conventional liposomes while controlling the release of encapsulated agents, modification of liposomes with well-designed polymers to modulate the physiological, particularly the interfacial properties of the drug carriers, has been intensively investigated. Briefly, polymers are incorporated into liposomes mainly using “grafting” or “coating”, defined according to the configuration of polymers at the surface. Polymer-modified liposomes preserve the advantages of liposomes as drug-delivery carriers and possess specific functionality from the polymers, such as long circulation, precise targeting, and stimulus-responsiveness, thereby resulting in improved pharmacokinetics, biodistribution, toxicity, and therapeutic efficacy. In this review, we summarize the progress in polymer-modified liposomes for drug delivery, focusing on the change in physiological properties of liposomes and factors influencing the overall therapeutic efficacy.

Electrostatic deposition assisted preparation, characterization and evaluation of chrysin liposomes for breast cancer treatment

Chrysin (CHR), a flavone found in multiple vegetables, fruits and mushrooms has been explored so far as a neurotropic, anti-inflammatory and anti-cancer biomolecule. Despite the stated therapeutic potential, low solubility and bioavailability limit its therapeutic benefit. To circumvent these drawbacks, development of chrysin liposomes (CLPs) is reported in the present investigation. The CLPs were developed by electrostatic deposition assisted film hydration method using chitosan/lecithin to protect chrysin in the nano-lipoidal shell. Developed CLPs were extensively characterized by DSC, XPRD, FE-SEM, TEM, particle size, polydispersity index, zeta potential, percent drug loading and encapsulation efficiency. These CLPs were further characterized by in vitro dissolution, in vivo bioavailability, in vitro anticancer and stability study. Suitable particle size, PDI and ZP implying stabilization of developed CLPs. The % DL and % EE was found to be 3.56 ± 0.13 and 90.5 ± 1.49 respectively. DSC and PXRD study revealed amorphous transition of CHR, which may help to increase its solubility and dissolution profile. In vivo pharmacokinetic study demonstrated more than 5-fold increase in relative bioavailability of CLPs. The in silico molecular docking study results demonstrated the electrostatic interaction between two polymers. The present study suggests that chitosan could protect and encapsulate chrysin which eventually enhances its cytotoxicity as well as bioavailability.

Fabrication of Robust Capsules by Sequential Assembly of Polyelectrolytes onto Charged Liposomes

This work presents a simple methodology for coating small unilamellar liposomes bearing different degrees of positive charge with polyelectrolyte multilayers using the sequential layer-by-layer deposition method. The liposomes were made of mixtures of 1,2-dioleyl-sn-glycero-3-phosphocoline and dimethyl dioctadecyl ammonium bromide (DODAB) and coated by alternated layers of the sodium salt of poly(4-styrenesulfonate) (PSS) and poly(allylamine) (PAH) as polyanions and polycations, respectively. The results show that the zeta potential of the liposomes was not very sensitive to the mole fraction of DODAB in the membrane, X_D, in the range 0.3 ≤ X_D ≤ 0.8. We were able to coat the liposomes with up to four polymer bilayers. The growth of the capsule size was followed by dynamic light scattering, and in some cases, by cryo-transmission electron microscopy, with good agreement between both techniques. The thickness of the layers, measured from the hydrodynamic radius of the coated liposome, depends on the polyelectrolyte used, so that the PSS layers adopt a much more packaged conformation than the PAH layers. An interesting finding is that the PSS amount needed to reach the isoelectric point of the capsules increases linearly with the charge density of the bare liposomes, whereas the amount of PAH does not depend on it. As expected, the preparation of the multilayers has to be done in such a way that when the system is close to the isoelectric point, the capsules do not aggregate. For this, we dropped the polyelectrolyte solution quickly, stirred it fast, and used dilute liposome suspensions. The method is very flexible and not limited to liposomes or polyelectrolyte multilayers; also, coatings containing charged nanoparticles can be easily made. Once the liposomes have been coated, lipids can be easily eliminated, giving rise to polyelectrolyte nanocapsules (polyelectrosomes) with potential applications as drug delivery platforms.

Polyelectrolyte Multilayers on Soft Colloidal Nanosurfaces: A New Life for the Layer-By-Layer Method

The Layer-by-Layer (LbL) method is a well-established method for the assembly of nanomaterials with controlled structure and functionality through the alternate deposition onto a template of two mutual interacting molecules, e.g., polyelectrolytes bearing opposite charge. The current development of this methodology has allowed the fabrication of a broad range of systems by assembling different types of molecules onto substrates with different chemical nature, size, or shape, resulting in numerous applications for LbL systems. In particular, the use of soft colloidal nanosurfaces, including nanogels, vesicles, liposomes, micelles, and emulsion droplets as a template for the assembly of LbL materials has undergone a significant growth in recent years due to their potential impact on the design of platforms for the encapsulation and controlled release of active molecules. This review proposes an analysis of some of the current trends on the fabrication of LbL materials using soft colloidal nanosurfaces, including liposomes, emulsion droplets, or even cells, as templates. Furthermore, some fundamental aspects related to deposition methodologies commonly used for fabricating LbL materials on colloidal templates together with the most fundamental physicochemical aspects involved in the assembly of LbL materials will also be discussed.

Molecular Design of Layer-by-Layer Functionalized Liposomes for Oral Drug Delivery

Liposomes are small spherical vesicles composed mainly of phospholipids and cholesterol. Over the years, a number of liposomal formulations have shown clinical promise, but the use of liposomes in oral drug delivery is limited. This is partly due to the vulnerability of conventional liposomes to the detrimental effect of gastrointestinal destabilizing factors and also to the poor efficiency in intestinal absorption of liposomes. Some of these issues can be ameliorated using the layer-by-layer (LbL) assembly technology, which has been widely applied to modify the surface of various nanoparticulate systems. Discussions about LbL functionalization of liposomes as oral drug carriers, however, are scant in the literature. To fill this gap, this review presents an overview of the roles of LbL functionalization in the development of liposomes, followed by a discussion about major principles of molecular design and engineering of LbL-functionalized liposomes for oral drug delivery. Regarding the versatility offered by LbL assembly, it is anticipated that LbL-functionalized liposomes may emerge as one of the important carriers for oral drug administration in the future.

Facile Fabrication of Natural Polyelectrolyte-Nanoclay Composites: Halloysite Nanotubes, Nucleotides and DNA Study

Complexation of biopolymers with halloysite nanotubes (HNTs) can greatly affect their applicability as materials building blocks. Here we have performed a systematic investigation of fabrication of halloysite nanotubes complexes with nucleotides and genomic DNA. The binding of DNA and various nucleotide species (polyAU, UMP Na₂, ADP Na₃, dATP Na, AMP, uridine, ATP Mg) by halloysite nanotubes was tested using UV-spectroscopy. The study revealed that binding of different nucleotides to the nanoclay varied but was low both in the presence and absence of MgCl₂, while MgCl₂ facilitated significantly the binding of longer molecules such as DNA and polyAU. Modification of the nanotubes with DNA and nucleotide species was further confirmed by measurements of ζ-potentials. DNA-Mg-modified nanotubes were characterized using transmission electron (TEM), atomic force (AFM) and hyperspectral microscopies. Thermogravimetric analysis corroborated the sorption of DNA by the nanotubes, and the presence of DNA on the nanotube surface was indicated by changes in the surface adhesion force measured by AFM. DNA bound by halloysite in the presence of MgCl₂ could be partially released after addition of phosphate buffered saline. DNA binding and release from halloysite nanotubes was tested in the range of MgCl₂ concentrations (10–100 mM). Even low MgCl₂ concentrations significantly increased DNA sorption to halloysite, and the binding was leveled off at about 60 mM. DNA-Mg-modified halloysite nanotubes were used for obtaining a regular pattern on a glass surface by evaporation induced self-assembly process. The obtained spiral-like pattern was highly stable and resisted dissolution after water addition. Our results encompassing modification of non-toxic clay nanotubes with a natural polyanion DNA will find applications for construction of gene delivery vehicles and for halloysite self-assembly on various surfaces (such as skin or hair).

Membrane functionalization in artificial cell engineering

Bottom-up synthetic biology aims to construct mimics of cellular structure and behaviour known as artificial cells from a small number of molecular components. The development of this nascent field has coupled new insights in molecular biology with large translational potential for application in fields such as drug delivery and biosensing. Multiple approaches have been applied to create cell mimics, with many efforts focusing on phospholipid-based systems. This mini-review focuses on different approaches to incorporating molecular motifs as tools for lipid membrane functionalization in artificial cell construction. Such motifs range from synthetic chemical functional groups to components from extant biology that can be arranged in a ‘plug-and-play’ approach which is hard to replicate in living systems. Rationally designed artificial cells possess the promise of complex biomimetic behaviour from minimal, highly engineered chemical networks.

Chitosan-DNA polyelectrolyte complex: Influence of chitosan characteristics and mechanism of complex formation

Polyelectrolyte complexes formed between DNA and chitosan present different and interesting physicochemical properties combined with high biocompatibility; they are very useful for biomedical applications. DNA in its double helical structure is a semi-rigid polyelectrolyte chain. Chitosan, an abundant polysaccharide in nature, is considered as one of the most attractive vectors due to its biocompatibility and biodegradability. Here we study chitosan/DNA polyelectrolyte complex formation mechanism and the key factors of their stability. Compaction process of DNA with chitosan was monitored in terms of the ζ-potential and hydrodynamic radius variation as a function of charge ratios between chitosan and DNA. The influence of chitosan degree of acetylation (DA) and its molecular weight on the stoichiometry of chitosan/DNA complexes characteristics was also studied. It is shown that the isoelectric point of chitosan/DNA complexes, as well as their stability, is directly related to the degree of protonation of chitosan (depending on pH), to the DA and to the external salt concentration. It is demonstrated that DNA compaction process corresponds to an all or nothing like-process. Finally, since an important factor in cell travelling is the buffering effect of the vector used, we demonstrated the essential role of free chitosan on the proton-sponge effect.

Controlling the Release from Enzyme-Responsive Microcapsules with a Smart Natural Shell

We design a natural and simple core-shell-structured microcapsule, which releases its cargo only when exposed to lipase. The cargo is entrapped inside a gel matrix, which is surrounded by a double-layer shell containing an inner solid lipid layer and an outer polymer layer. This outer polymer layer can be designed according to the intended biological system and is responsible for protecting the microcapsule architecture and transporting the cargo to the desired site of action. The lipid layer contains natural ester bonds, which are digested by lipase, controlling the release of cargo from the microcapsule core. To demonstrate the feasibility of this approach, our model system includes a colorant bixin entrapped inside a κ-carrageenan gel matrix. This core is surrounded by an inner beeswax-palmitic acid layer and an outer casein-poloxamer 338 layer. These fabricated microcapsules are then applied into Cheddar cheese, where they selectively color the cheese matrix.

Design and production of hybrid nanoparticles with polymeric-lipid shell–core structures: conventional and next-generation approaches

An innovative, simil-microfluidic, nanoliposome-covering method operating continuously with massive production yield overcoming the disadvantages of conventional methods is proposed.

Washless Method Enables Multilayer Coating of an Aggregation-Prone Nanoparticulate Drug Delivery System with Enhanced Yields, Colloidal Stability, and Scalability

Aggregation is frequently encountered during coating nanoparticles, especially when the core is not solid and the coating polyelectrolytes are weak. Here, the coating of a nanoliposome with two weak polyelectrolytes, alginate and chitosan, is investigated. First, quartz crystal microbalance with dissipation, atomic force microscopy, scanning electron microscopy, and energy dispersive spectroscopy analyses confirm the feasibility of firm adsorption of up to 16 layers of weak polyelectrolytes to the liposomal surface. Titrations are then performed to identify the lowest amounts of polyelectrolytes required to make eight saturated coating layers using the washless method. Significantly improved yields and reproducibility (almost 100%) are achieved, in addition to control over layer thickness. Attenuated total reflectance Fourier transform infrared spectroscopy studies confirm the success of layering. This is special since scientists always attempt to reduce nanoparticle aggregation by substituting the soft core, using one strong polyelectrolyte, or contending with lower yields or numbers of coating layers.

Engineering nanolayered particles for modular drug delivery

Layer-by-layer (LbL) based self-assembly of nanoparticles is an emerging and powerful method to develop multifunctional and tissue responsive nanomedicines for a broad range of diseases. This unique assembly technique is able to confer a high degree of modularity, versatility, and compositional heterogeneity to nanoparticles via the sequential deposition of alternately charged polyelectrolytes onto a colloidal template. LbL assembly can provide added functionality by directly incorporating a range of functional materials within the multilayers including nucleic acids, synthetic polymers, polypeptides, polysaccharides, and functional proteins. These materials can be used to generate hierarchically complex, heterogeneous thin films on an extensive range of both traditional and novel nanoscale colloidal templates, providing the opportunity to engineer highly precise systems capable of performing the numerous tasks required for systemic drug delivery. In this review, we will discuss the recent advancements towards the development of LbL nanoparticles for drug delivery and diagnostic applications, with a special emphasis on the incorporation of biostability, active targeting, desirable drug release kinetics, and combination therapies into LbL nanomaterials. In addition to these topics, we will touch upon the next steps for the translation of these systems towards the clinic.

Change of Multiple-Layered Phospholipid Vesicles Produced by Electrostatic Deposition of Polymers during Storage

In this study, 1 wt% lecithin (–), chitosan (+), and λ-carrageenan (–) were prepared to manufacture multiple-layered liposomes with optimal formulations developed in a previous study by using layer-by-layer electrostatic deposition. We observed their particle size, ζ-potential, sedimentation behavior, and microstructure for 6 weeks. Multiple-layered liposomes were quenched with calcein to evaluate stability in terms of factors such as encapsulation efficiency and released amount of calcein. The particle size of multi-layered liposomes increased with storage periods and the ζ-potential of multiple-layered liposomes gained a neutral charge. Interestingly, negatively charged layered liposomes were smaller than positively charged layered liposomes and showed a lower polydispersity index. Moreover, the ζ-potential did not apparently change compared to positively charged layered liposomes. For the calcein release study, multiple-layered liposomes significantly sustained quenched calcein more than that observed using non-layered liposomes. This study showed that it was possible to increase the thickness of the liposome surface and to manipulate its charge using chitosan and λ-carrageenan through electrostatic deposition. Results showed that manufacturing negatively charged multiple-layer (over 4-layer) liposomes with charged biopolymer improved the physicochemical stability of liposomes.

Design Advances in Particulate Systems for Biomedical Applications

The search for more efficient therapeutic strategies and diagnosis tools is a continuous challenge. Advances in understanding the biological mechanisms behind diseases and tissues regeneration have widened the field of applications of particulate systems. Particles are no more just protective systems for the encapsulated drugs, but they play an active role in the success of the therapy. Moreover, particles have been explored for innovative purposes as templates for cells growth and as diagnostic tools. Until few years ago the most relevant parameters in particles formulation were the chemistry and the size. Currently, it is known that other physical characteristics can remarkably affect the performance of particulate systems. Particles with non-conventional shapes exhibit advantages due to the increasing circulation time in blood stream, less clearance by the immune system and more efficient cell internalization and trafficking. Creation of compartments has been found useful to control drug release, to tune the transport of substances across biological barriers, to supply the target with more than one bioactive agent or even to act as theranostic systems. It is expected that such complex shaped and compartmentalized systems improve the therapeutic outcomes and also the patient's compliance, acting as advanced devices that serve for simultaneous diagnosis and treatment of the disease, combining agents of very different features, at the same time. In this review, we overview and analyse the most recent advances in particle shape and compartmentalization and applications of newly designed particulate systems in the biomedical field.

Improved stability and skin permeability of sodium hyaluronate-chitosan multilayered liposomes by Layer-by-Layer electrostatic deposition for quercetin delivery

Layer-by-Layer (LbL) technology, based on the electrostatic interaction of polyelectrolytes, is used to improve the stability of drug delivery systems. In the present study, we developed multilayered liposomes with up to 10 alternating layers based on LbL deposition of hyaluronate-chitosan for transdermal delivery. Dihexadecyl phosphate was used to provide liposomes with a negative charge; the liposomes were subsequently coated with cationic chitosan (CH) followed by anionic sodium hyaluronate (HA). The resulting particles had a cumulative size of 528.28±29.22nm and an alternative change in zeta potential. Differential scanning calorimetry (DSC) and transmission electron microscopy (TEM) revealed that the multilayered liposomes formed a spherical polyelectrolyte complex (PEC) after deposition. Observations in size distribution after 1 week found that the particles coated with even layers of polyelectrolytes, hyaluronate and chitosan (HA-CH), were more stable than the odd layers. Membrane stability in the presence of the surfactant Triton X-100 increased with an increase in bilayers as compared to uncoated liposomes. An increase in the number of bilayers deposited on the liposomal surface resulted in a sustained release of quercetin, with release kinetics that fit the Korsmeyer-Peppas model. In an in vitro skin permeation study, negatively charged (HA-CH)-L and positively charged CH-L were observed to have similar skin permeability, which were superior to uncoated liposomes. These results indicate that multilayered liposomes properly coated with polyelectrolytes of HA and CH by electrostatic interaction improve stability and can also function as potential drug delivery system for the transdermal delivery of the hydrophobic antioxidant quercetin.