Postdiffusion of oligo-peptide within exponential growth multilayer films for localized peptide delivery

Polyelectrolyte Multilayer Films Based on Natural Polymers: From Fundamentals to Bio-Applications

Natural polymers are of great interest in the biomedical field due to their intrinsic properties such as biodegradability, biocompatibility, and non-toxicity. Layer-by-layer (LbL) assembly of natural polymers is a versatile, simple, efficient, reproducible, and flexible bottom-up technique for the development of nanostructured materials in a controlled manner. The multiple morphological and structural advantages of LbL compared to traditional coating methods (i.e., precise control over the thickness and compositions at the nanoscale, simplicity, versatility, suitability, and flexibility to coat surfaces with irregular shapes and sizes), make LbL one of the most useful techniques for building up advanced multilayer polymer structures for application in several fields, e.g., biomedicine, energy, and optics. This review article collects the main advances concerning multilayer assembly of natural polymers employing the most used LbL techniques (i.e., dipping, spray, and spin coating) leading to multilayer polymer structures and the influence of several variables (i.e., pH, molar mass, and method of preparation) in this LbL assembly process. Finally, the employment of these multilayer biopolymer films as platforms for tissue engineering, drug delivery, and thermal therapies will be discussed.

Temperature-induced molecular transport through polymer multilayers coated with PNIPAM microgels

Composite polymer films with temperature controlled permeability are designed by coating soft polyelectrolyte multilayers with PNIPAM microgels.

(3-aminopropyl)-4-methylpiperazine end-capped poly(1,4-butanediol diacrylate-co-4-amino-1-butanol)-based multilayer films for gene delivery

Biodegradable polyelectrolyte surfaces for gene delivery were created through electrospinning of biodegradable polycations combined with iterative solution-based multilayer coating. Poly(β-amino ester) (PBAE) poly(1,4-butanediol diacrylate-co-4-amino-1-butanol) end-capped with 1-(3-aminopropyl)-4-methylpiperazine was utilized because of its ability to electrostatically interact with anionic molecules like DNA, its biodegradability, and its low cytotoxicity. A new DNA release system was developed for sustained release of DNA over 24 h, accompanied by high exogenous gene expression in primary human glioblastoma (GB) cells. Electrospinning a different PBAE, poly(1,4-butanediol diacrylate-co-4,4'-trimethylenedipiperidine), and its combination with polyelectrolyte 1-(3-aminopropyl)-4-methylpiperazine end-capped poly(1,4-butanediol diacrylate-co-4-amino-1-butanol)-based multilayers are promising for DNA release and intracellular delivery from a surface.

Robust and flexible free-standing films for unidirectional drug delivery

Robust and flexible free-standing polymer films for unidirectional drug delivery are fabricated by sandwiching drug-containing polyelectrolyte multilayer films between poly(lactic-co-glycolic acid) (PLGA) barrier and capping layers. The drug-containing films are fabricated by layer-by-layer (LbL) assembly of chemically cross-linked poly(allylamine hydrochloride)-dextran (PAH-D) microgel and hyaluronic acid (HA), which can load negatively charged cancer-inhibiting drug, methotrexate (MTX). Because the PLGA barrier layer effectively blocks MTX release, MTX can be predominantly released from the PLGA capping layer of the free-standing film. This increases the efficacy of released MTX to cancer cells while minimizing its side effects on the normal tissues. We believe that the unidirectional drug delivery free-standing films can open a new avenue to design of highly efficient drug delivery systems for biomedical application.

In situ synthesis of gold nanoparticles in exponentially-growing layer-by-layer films

In situ synthesis of inorganic nanoparticles (NPs) in polyelectrolytes multilayers (PEMs) has recently gained much attention. Due to the versatility of their composition, PEMs offer a unique opportunity to synthesize a variety of NPs. So far, mostly cationic precursors have been used and only few studies have investigated the possibility of using amine groups to bind anionic precursors. Here, we use exponentially growing poly(L-lysine)/hyaluronan (PLL/HA) films as a nanoreservoir to bind and sequester aurochlorate (AuCl(4)(-)) anions thanks to the large number of free amine groups. The polypeptide-polysaccharide reactive template enabled the formation in a spatially-confined environment of gold NP at a very high yield. The synthesized gold NPs were homogenous and well-dispersed in the nanocomposite. Importantly, there was no particular effect of the film-ending layer (either PLL or HA). The largest particles of ~9 nm and the largest amount of gold were obtained at acidic pH of 3. When the pH was increased, smaller and more numerous NPs were synthesized but the total amount of gold was lower. Based on UV-visible spectrometry, FTIR and TEM data, we finally propose a scheme for the mechanism of gold NPs formation, in which several groups of PLL and HA contribute to the binding of gold ions, the nucleation and growth of NPs, and their stabilization in the "bulk" of the film.

Control of cell adhesion by mechanical reinforcement of soft polyelectrolyte films with nanoparticles

Chemical cross-linking is the standard approach to tune the mechanical properties of polymer coatings for cell culture applications. Here we show that the elastic modulus of highly swollen polyelectrolyte films composed of poly(L-lysine) (PLL) and hyaluronic acid (HA) can be changed by more than 1 order of magnitude by addition of gold nanoparticles (AuNPs) in a one-step procedure. This hydrogel-nanoparticle architecture has great potential as a platform for advanced cell engineering application, for example remote release of drugs. As a first step toward utilization of such films for biomedical applications we identify the most favorable polymer/nanoparticle composition for optimized cell adhesion on the films. Using atomic force microscopy (AFM) we determine the following surface parameters that are relevant for cell adhesion, i.e., stiffness, roughness, and protein interactions. Optimized cell adhesion is observed for films with an elastic modulus of about 1 MPa and a surface roughness on the order of 30 nm. The analysis further shows that AuNPs are not incorporated in the HA/PLL bulk but form clusters on the film surface. Combined studies of the elastic modulus and surface topography indicate a cluster percolation threshold at a critical surface coverage above which the film stiffness drastically increases. In this context we also discuss changes in film thickness, material density and swelling ratio due to nanoparticle treatment.

Polymer assemblies for controlled delivery of bioactive molecules from surfaces

Localized delivery of bioactive compounds from surfaces of biomedical devices affords significant therapeutic benefits, and often relies on the capability of surface coatings to provide spatial and temporal control over release rate. The layer-by-layer technique presents a unique means to construct surface coatings that can conform to a variety of biomaterial surfaces and serve as matrices enabling controlled delivery of bioactive molecules from surfaces. The versatility of layer-by-layer assembly enables construction of surface coatings of diverse chemistry and internal architecture with controlled release properties. This review focuses on recent developments in constructing such layered matrices using linear polymers, polymer nanoparticles and block copolymer micelles, including micelles with stimuli-responsive cores, as film building blocks and in controlling release rate of therapeutics from these matrices via degradation, application of pH, ionic strength, temperature, light, electric field and chemical or biological stimuli. Challenges and opportunities associated with fabrication of stratified multilayer films capable of multi-stage delivery of multiple drugs are also discussed.

Biomedical Applications of Biodegradable Polymers

Utilization of polymers as biomaterials has greatly impacted the advancement of modern medicine. Specifically, polymeric biomaterials that are biodegradable provide the significant advantage of being able to be broken down and removed after they have served their function. Applications are wide ranging with degradable polymers being used clinically as surgical sutures and implants. In order to fit functional demand, materials with desired physical, chemical, biological, biomechanical and degradation properties must be selected. Fortunately, a wide range of natural and synthetic degradable polymers has been investigated for biomedical applications with novel materials constantly being developed to meet new challenges. This review summarizes the most recent advances in the field over the past 4 years, specifically highlighting new and interesting discoveries in tissue engineering and drug delivery applications.

Netlike knitting of polyelectrolyte multilayers on honeycomb-patterned substrate

The pH-amplified exponential growth layer-by-layer (LBL) self-assembly process was directly performed on honeycomb-patterned substrate for achievement of "guided patterning" of polyelectrolyte multilayers. Polyethylenimine (PEI) and poly(acrylic acid) (PAA) were used as polyanions, and their pH were carefully tuned to achieve pH-enhanced exponential growth. Guided by underlying hexagonally patterned islandlike poly(dimethylsiloxane) (PDMS) arrays, the diffusive polyelectrolytes rapidly interweaved into linear, multilayered structures distributed along the grooves between the patterned protuberate and formed a regular network of multilayered film with uniform mesh size. Netlike "knitting" of polyelectrolyte multilayers on honeycomb-patterned substrate has been realized by following this procedure. Superhydrophobic surfaces could be readily obtained after several bilayers of LBL assembly (with thermal cross-linking and surface fluorination by chemical vapor deposition), indicating that successful fabrication of functional micro- and nanoscale hierarchical structures can be achieved. Both high- and low-adhesion superhydrophobic surfaces ("petal effect" and "lotus effect") can be obtained with different bilayers of assembly, proving that different levels of nano- to microstructural hierarchy can be realized using this method. Furthermore, we were able to get topographically asymmetric, free-standing, polyelectrolyte multilayer films in the case that we performed more than eight bilayers of assembly. This research reported template-directed LBL patterning assembly for the first time. It provides a beneficial exploration for the surface patterning technique for the LBL assembly process.

Layer-by-layer-assembled capsules and films for therapeutic delivery

Polymeric materials formed via layer-by-layer (LbL) assembly have promise for use as drug delivery vehicles. These multilayered materials, both as capsules and thin fi lms, can encapsulate a high payload of toxic or sensitive drugs, and can be readily engineered and functionalized with specific properties. This review highlights important and recent studies that advance the use of LbL-assembled materials as therapeutic devices. It also seeks to identify areas that require additional investigation for future development of the field. A variety of drug-loading methods and delivery routes are discussed. The biological barriers to successful delivery are identified, and possible solutions to these problems are discussed. Finally, state-of-the-art degradation and cargo release mechanisms are also presented.