Preparation and characterization of biocompatible microcapsules of sodium cellulose sulfate/chitosan by means of layer-by-layer self-assembly

Carbohydrates based stimulus responsive nanocarriers for cancer-targeted chemotherapy: A review of current practices

INTRODUCTION

Many nanocarriers have been developed to react physicochemically to exterior stimuli like ultrasonic, light, heat, and magnetic fields, along with various internal stimuli including pH, hypoxia, enzyme, and redox potential. Nanocarriers are capable to respond various stimuli within the cancer cells to enable on-demand drug delivery, activation of bioactive compounds, controlled drug release, and targeting ligands, as well as size, charge, and conformation conversion, enabling sensing and signaling, overcoming multidrug resistance, accurate diagnosis, and precision therapy.

AREAS COVERED

Carbohydrates are ubiquitous biomolecules with a high proclivity for supramolecular network formation. Numerous carbohydrate-based nanomaterials have been used in biological solicitations and stimuli-based responses. Particular emphasis has been placed on the utilization of carbohydrate-based NPs and nanogels in various fields including imaging, drug administration, and tissue engineering. Because the assembly process is irreversible, carbohydrate-based systems are excellent ingredients for the development of stimulus-responsive nanocarriers for cancer-targeted chemotherapy. This review aims to summarise current research on carbohydrate-based nanomaterials, with an emphasis on stimuli-sensitive nanocarriers for cancer-targeted chemotherapy.

EXPERT OPINION

Carbohydrates-based stimulus-responsive nanomaterials have been proved highly efficient for targeted delivery of anticancer drugs, thus leading to effective chemotherapy with minimum off-target effects.

Microencapsulation of Essential Oils: A Review

Essential oils (EOs) are complex mixtures of volatile compounds extracted from different parts of plants by different methods. There is a large diversity of these natural substances with varying properties that lead to their common use in several areas. The agrochemical, pharmaceutical, medical, food, and textile industry, as well as cosmetic and hygiene applications are some of the areas where EOs are widely included. To overcome the limitation of EOs being highly volatile and reactive, microencapsulation has become one of the preferred methods to retain and control these compounds. This review explores the techniques for extracting essential oils from aromatic plant matter. Microencapsulation strategies and the available technologies are also reviewed, along with an in-depth overview of the current research and application of microencapsulated EOs.

Protective Mechanism of a Layer-by-Layer-Assembled Artificial Cell Wall on Probiotics

Constructing an artificial cell wall (AFCW) based on the layer-by-layer assembly of polymer films to protect probiotics in harsh conditions is highly desirable. Early findings showed that encapsulating yeast cells by an AFCW improved the cell viability by 50% in antibiotic solution. However, the detailed molecular interaction mechanism remains unclear by experiments. Herein, two ciprofloxacin (CPFX) permeation models, including models 1 and 2 that were, respectively, composed of just the yeast cell membrane and the AFCW coating cell membrane, were investigated by molecular dynamics simulations. The free energy profiles delineating the permeation process of CPFX reveal that the permeation of CPFX through the cell membrane of model 2 is more difficult than through that of model 1. The analysis results show that the AFCW leads to two sharp increases in free energy barriers, amounting to 8.9 and 6.2 kcal/mol, thereby reducing the penetrating rate of CPFX into the cell membrane. Moreover, decomposition of the potentials of mean force into free energy components suggested that the electrostatic interactions of CPFX with the AFCW predominantly contributed to the high free energy barriers. The current results provide a good understanding of the protective mechanism of the self-assembled cell walls against CPFX and help to design other AFCWs.

Protein repellent anti-coagulative mixed-charged cellulose derivative coatings

This study describes the formation of cellulose based polyelectrolyte charge complexes on the surface of biodegradable polycaprolactone (PCL) thin films. Anionic sulphated cellulose (CS) and protonated cationic amino cellulose (AC) were used to form these complexes with a layer-by-layer coating technique. Both polyelectrolytes were analyzed by charge titration methods to elucidate their pH-value dependent protonation behavior. A quartz crystal microbalance with dissipation (QCM-D) in combination with X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) were used to follow the growth, stability and water content of up to three AC/CS bi-layers in aqueous environment. This was combined with coagulation studies on one, two and three bilayers of AC/CS, measuring the thrombin formation rate and the total coagulation time of citrated blood plasma with QCM-D. Stable mixed charged bilayers could be prepared on PCL and significantly higher masses of AC than of CS were present in these complexes. Strong hydration due to the presence of ammonium and sulphate substituents on the backbone of cellulose led to a significant BSA repellent character of three bilayers of AC/CS coatings. The total plasma coagulation time was increased in comparison to neat PCL, indicating an anticoagulative nature of the coatings. Surprisingly, a coating solely composed of an AC layer significantly prolonged the total coagulation time on the surfaces although it did not prevent fibrinogen deposition. It is suggested that these cellulose derivative-based coatings can therefore be used to prevent unwanted BSA deposition and fibrin clot formation on PCL to foster its biomedical application.

Ultra-low pressure cellulose-based nanofiltration membrane fabricated on layer-by-layer assembly for efficient sodium chloride removal

Cellulose is a renewable, biodegradable, biocompatible, and sustainable material. A bamboo cellulose-based nanofiltration membrane (LBL-NF-CS/BCM) was prepared with a combination of layer-by-layer assembly and spraying methods. The chemical structure, morphology, and surface charge of the resultant LBL-NF-CS/BCM composite membranes were characterized based on Thermo Gravimetric Analysis (TGA), X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), and X-ray Photoelectron Spectroscopy Scanning (XPS). The nanofiltration performance of the LBL-NF-CS/BCM composite membranes was evaluated using 500 ppm NaCl solutions under 0.3 MPa pressure. It was found that the LBL-NF-CS/BCM composite membranes had a rejection rate of about 36.11 % against a 500 ppm NaCl solution under the conditions tested, and membrane flux of about 12.08 L/(m² h) was reached. The combined layer-by-layer assembly and spraying provides a scalable and convenient process concept for nanofiltration membrane fabrication.

A new indicator of ionic polymeric flocculants for the removal of heavy metals anions: Specific charge density

Ionic polymeric flocculants, as useful and widely used technology, have been applied for heavy metal pollution control. However, although molecular weight is an important indicator, it is not a comprehensive indicator for evaluating flocculation efficiencies of ionic flocculants. Herein, specific charge density (SCD), defined as charge density of unit molecular weight, is a new indicator to evaluate the performance of ionic polymer flocculants. Polydiallyldimethylammonium chloride (PDADMAC) as coagulant aid is investigated to flocculate different anionic pollutants. The results indicate that PDADMAC with a high SCD value could benefit to the flocculation efficiency of anionic pollutants. According to statistical analysis, the average pollutants residual could decrease to 8.64%-32.27% by that with high SCD value, especially for high valence pollutants with a decrease from 58.97%-60.40% to 27.35%-32.27%. The indicator of SCD values not only could characterize the performance of polymer flocculants but also provide a new sight of the flocculation mechanism of polymeric flocculants. PRACTITIONER POINTS: Specific Charge Density (SCD) is defined as charge density of unit molecularweight. SCD as a new indicator to evaluate comprehensively the performance of flocculants. Removal efficiencies by flocculation increase with SCD value of PDADMAC increase. Effect of SCD of PDADMAC on removal of pollutant with high valence is significant. SCD of PDADMAC is less indicative for removal of pollutant with low valence.

Magnetically Actuated Heterogeneous Microcapsule-Robot for the Construction of 3D Bioartificial Architectures

Core-shell microcapsules as one type of the most attractive carriers and reactors have been widely applied in the fields of drug screening and tissue engineering owing to their excellent biocompatibility and semi-permeability. Yet, the spatial organization of microcapsules with specific shapes into three-dimensional (3D) ordered architectures still remains a big challenge. Here, we present a method to assemble shape-controllable core-shell microcapsules using an untethered magnetic microcapsule-robot. The microcapsule-robot with the shape-matching design can grab the building components tightly during the transportation and assembly processes. The core-shell feature of the microcapsule effectively prevents the magnetic nanoparticles from interacting with bioactive materials. The assembly results of cell-loaded heterogeneous microcapsules reveal that this strategy not only allows the magnetic microcapsule-robot to work in different workspaces in vitro for the creation of 3D constructions but also offers a noninvasive and dynamical manipulation platform by remotely controlling the position and orientation of the soft and liquid-like microcapsule components individually.

Acoustofluidic coating of particles and cells

On-chip microparticle and cell coating technologies enable a myriad of applications in chemistry, engineering, and medicine. Current microfluidic coating technologies often rely on magnetic labeling and concurrent deflection of particles across laminar streams of chemicals. Herein, we introduce an acoustofluidic approach for microparticle and cell coating by implementing tilted-angle standing surface acoustic waves (taSSAWs) into microchannels with multiple inlets. The primary acoustic radiation force generated by the taSSAW field was exploited in order to migrate the particles across the microchannel through multiple laminar streams, which contained the buffer and coating chemicals. We demonstrate effective coating of polystyrene microparticles and HeLa cells without the need for magnetic labelling. We characterized the coated particles and HeLa cells with fluorescence microscopy and scanning electron microscopy. Our acoustofluidic-based particle and cell coating method is label-free, biocompatible, and simple. It can be useful in the on-chip manufacturing of many functional particles and cells.

Removal of crystal violet from aqueous solutions using functionalized cellulose microfibers: a beneficial use of cellulosic healthcare waste

In this research, the preparation of functionalized cellulosic microfibers (FCMFs) was proposed as a beneficial use of cellulosic healthcare waste for the removal of crystal violet from aqueous solutions.

Preparation of porous alumina microspheres via an oil-in-water emulsion method accompanied by a sol–gel process

Porous alumina microspheres prepared via a facile template-free approach followed by heat-treatment, exhibiting a three-dimensional interconnected structure.

Carbohydrate nanocarriers in biomedical applications: functionalization and construction

Carbohydrates are used to functionalize or construct nanocarriers for biomedical applications – specific targeting, biocompatibility, stealth effect, biodegradability.

Design of chitosan and its water soluble derivatives-based drug carriers with polyelectrolyte complexes

Chitosan, the cationic polysaccharide derived from the natural polysaccharide chitin, has been studied as a biomaterial for more than two decades. As a polycationic polymer with favorable properties, it has been widely used to form polyelectrolyte complexes with polyanions for various applications in drug delivery fields. In recent years, a growing number of studies have been focused on the preparation of polyelectrolyte complexes based on chitosan and its water soluble derivatives. They have been considered well-suited as biomaterials for a number of vital drug carriers with targeted/controlled release profiles, e.g., films, capsules, microcapsules. In this work, an overview highlights not only the favorable properties of chitosan and its water soluble derivatives but also the good performance of the polyelectrolyte complexes produced based on chitosan. Their various types of applications as drug carriers are reviewed in detail.

Facile synthesis of multilayered polysaccharidic vesicles

In this study, we developed facile synthesis method of multilayered polysaccharidic vesicles (hereafter termed 'mPSVs') using polysaccharides such as starch, hyaluronate (HA), and glycol chitosan (GC) via simple chemistry and using enzymatic reactions among polysaccharides. The enzymatic degradation of the HA shell by hyaluronidase (HYAL) enzyme contributed to accelerate the release of protein/peptide from the mPSVs. The mPSVs containing folate ligand and apoptotic cell death-inducing D-(KLAKLAK)2 peptide were effectively accumulated in in vivo KB tumor cells, primarily owing to passive tumor penetration via the enhanced permeability and retention (EPR) effect and active targeting via specific binding to folate receptors expressed on KB tumor cells. These mPSVs resulted in a significant increase in the in vivo tumor inhibition. This vesicle system is expected to exhibit great potential as an advanced platform technology for biomedical applications involving small molecular drugs with protein/gene targets.

Impact of ionic strength on chitin nanocrystal-xyloglucan multilayer film growth

The impact of the ionic strength on the film growth has been studied for the architectures composed of chitin nanocrystals (ChiNC) and xyloglucan (XG) to better understand the fabrication process of multilayer films. The formation of ChiNC-XG assemblies was monitored by quartz crystal microbalance with dissipation (QCM-D) and multilayer films were fabricated by the spin-coating assisted layer-by-layer (LbL) procedure. Films were prepared from 1 g L(-1) ChiNC dispersions at pH 4 without and with the addition of NaCl (0 and 5 mM, respectively) and 0.5 g L(-1) XG solutions in water. Distinct growth pattern and structural characteristics were found for the films prepared from ChiNC at 0 and 5 mM NaCl. Specifically, films assembled without salt exhibited lower mass deposition and film growth failed after 5 (ChiNC-XG) bilayers. Differently, at 5 mM NaCl higher amounts of both polymers (ChiNC and XG) were adsorbed; therefore, the films were thicker, and the deposition succeeded up to 10 bilayers. Atomic force microscopy (AFM) revealed an almost completely covered surface after the adsorption of ChiNC at 5 mM NaCl whereas salt-free ChiNC dispersions resulted in lower surface coverage. These results reliably concluded that the fabrication of (ChiNC-XG) films requires the screening of the charges to promote the layers stability.

Improving stability and biocompatibility of alginate/chitosan microcapsule by fabricating bi-functional membrane

Cell encapsulation technology holds promise for the cell-based therapy. But poor mechanical strength and biocompatibility of microcapsule membrane are still obstacles for the clinical applications. A novel strategy is presented to prepare AC₁ C₂ A microcapsules with bi-functional membrane (that is, both desirable biocompatibility and membrane stability) by sequentially complexing chitosans with higher deacetylation degree (C₁) and lower deacetylation degree (C₂) on alginate (A) gel beads. Both in vitro and in vivo evaluation of AC₁C₂ A microcapsules demonstrate higher membrane stability and less cell adhesion, because the introduction of C₂ increases membrane strength and decreases surface roughness. Moreover, diffusion test of AC₁C₂ A microcapsules displays no inward permeation of IgG protein suggesting good immunoisolation function. The results demonstrate that AC₁C₂ A microcapsules with bi-functional membrane could be a promising candidate for microencapsulated cell implantation with cost effective usage of naturally biocompatible polysaccharides.

Effect of molecular composition of heparin and cellulose sulfate on multilayer formation and cell response

Here, the layer-by-layer method was applied to assemble films from chitosan paired with either heparin or a semisynthetic cellulose sulfate (CS) that possessed a higher sulfation degree than heparin. Ion pairing was exploited during multilayer formation at pH 4, while hydrogen bonding is likely to occur at pH 9. Effects of polyanions and pH value during layer formation on multilayers properties were studied by surface plasmon resonance ("dry layer mass"), quartz crystal microbalance with dissipation monitoring ("wet layer mass"), water contact angle, and zeta potential measurements. Bioactivity of multilayers was studied regarding fibronectin adsorption and adhesion/proliferation of C2C12 myoblast cells. Layer growth and dry mass were higher for both polyanions at pH 4 when ion pairing occurred, while it decreased significantly with heparin at pH 9. By contrast, CS as polyanion resulted also in high layer growth and mass at pH 9, indicating a much stronger effect of hydrogen bonding between chitosan and CS. Water contact angle and zeta potential measurements indicated a more separated structure of multilayers from chitosan and heparin at pH 4, while CS led to a more fuzzy intermingled structure at both pH values. Cell behavior was highly dependent on pH during multilayer formation with heparin as polyanion and was closely related to fibronectin adsorption. By contrast, CS and chitosan did not show such dependency on pH value, where adhesion and growth of cells was high. Results of this study show that CS is an attractive candidate for multilayer formation that does not depend so strongly on pH during multilayer formation. In addition, such multilayer system also represents a good substrate for cell interactions despite the rather soft structure. As previous studies have shown specific interaction of CS with growth factors, multilayers from chitosan and CS may be of great interest for different biomedical applications.

Characterization of novel lactoferrin loaded capsules prepared with polyelectrolyte complexes

Novel capsules loaded with lactoferrin (LF) were prepared using polyelectrolyte complexes that were formed by water soluble chitosan (WSC), sodium cellulose sulfate (NaCS) and sodium polyphosphate (PPS). Normal chitosan (soluble in acidic conditions) was chosen as a control to prepare similar capsules with NaCS and PPS. (1)H NMR and FTIR spectra analysis showed that WSC was in a form of chitosan hydrochloride which can be directly dissolved and protonated in acid-free water. SEM results showed that the capsules had a typical wall-capsule structure with a regular spherical shape and an average diameter of 1.97 mm. TGA studies revealed that the thermal stability of the capsules were enhanced and the moisture content of the drug-free/loaded capsules were 6.3% and 3.2%. SDS-PAGE results showed that the primary structures of the processed LF in the capsules were unchanged. Drug loading (LE%) and encapsulation efficiency (EE%) analysis showed that the capsules had a higher LE% (45.6%) and EE% (70.7%) than that of the control. In vitro release studies showed that the capsules had a regular and sustainable release profiles in simulated colonic fluid. All of these results indicated that the capsules prepared could be used as a candidate protein drug carrier for colon.

Improved process for the production of cellulose sulfate using sulfuric acid/ethanol solution

An improved process for production of cellulose sulfate (CS) was developed by using sulfuric acid/ethanol solution as sulfonating agent and Na2SO4 as water absorbent. The FTIR, SEM and TG analysis were used to characterize the CS prepared. The total degree of substitution and viscosity of the product solution (2%, w/v) were ranging from 0.28 to 0.77 and from 115 to 907 mPa s, respectively, by changing the process parameters such as the amount of Na2SO4, the reaction time, the temperature, the sulfuric acid/alcohol ratio and liquid/solid ratio. The results indicated that the product with DS (0.28-0.77) and η2% (115-907) mPa s could be produced by using this improved process and more cellulose sulfate could be produced when cellulose was sulfonated for 3-4 h at -2 °C in sulfuric acid/ethanol (1.4-1.6) solution with addition of 0.8 g Na2SO4. The (13)C NMR indicated that the sulfate group of CS produced using sulfuric acid/ethanol solution was at C6 position.

Polysaccharides as a source of advanced materials: cellulose hollow microspheres for drug delivery in cancer therapy

Biocompatible hollow poly(methyl acrylic acid-co-N-isopropylacrylamide-co-ethyleneglycol dimethacrylate)@cellulose succinate (P(MAA-co-NIPAAM-co-EGDMA)@CS) microspheres have been synthesized by employing uniform silica-MPS microspheres as template. Silica spheres were synthesized via Stöber method involving tetraethyl orthosilicate. The surface of resulting silica Stöber microspheres was modified using 3-methacryloxypropyltrimethoxysilane (MPS), a polymerizable silane coupling agent. The above reagent introduces carbon-carbon double bonds on microspheres' surface. This strategy uses the copolymerization of the following monomers, methacrylic acid (MAA), N-isopropyl acrylamide (NIPAAM) and the ethyleneglycol dimethacrylate (EGDMA), which was used as cross-linker, aiming at fabricating the first shell. Distillation precipitation polymerization method was carried out with 2,2-azobis(2-methylpropionitrile) as initiator in acetonitrile aiming at coating the inorganic microspheres with organic shell of the above-mentioned copolymer. In continuation, cellulose succinate and cellulose powder was absorbed through electrostatic interactions onto microspheres' surface and the isolated product was cross-linked through esteric bonds formation. The cellulose succinate hollow microspheres were obtained after the silica core removal. The resulting spheres were characterized by Fourier transform infrared spectroscopy and observed by scanning and transmission electron microscopy. Dynamic light scattering was used to study the hydrodynamic diameter of the synthesized microspheres. The anticancer drug daunorubicin was loaded in the spheres, and its release behavior was evaluated at acidic and slightly basic pH conditions, aiming at evaluating its behavior at the healthy and pathogenic tissues.

Fluorescent nanoparticles of chitosan complex for real-time monitoring drug release

New types of fluorescent nanoparticles (FNPs) were prepared through ionic self-assembly of anthracene derivative and chitosan for applications as drug delivery carriers with real-time monitoring of the process of drug release. Because of the presence of the hydrophilic groups, these FNPs showed excellent dispersion and stability in aqueous solution. The structure and properties of the FNPs were investigated by using means of (1)H NMR, FTIR, SEM, dynamic light scattering (DLS), and so on. The potential practical applications as drug delivery carriers for real-time detection of the drug release process were demonstrated using Nicardipine as a model drug. Upon loading the drug, the strong blue fluorescence of FNPs was quenched due to electron transfer and fluorescence resonance energy transfer (FRET). With release of drug in vitro, the fluorescence was recovered again. The relationship between the accumulative drug release of FNPs and the recovered fluorescence intensity has been established. Such FNPs may open up new perspectives for designing a new class of detection system for monitoring drug release.

Cellulose nanocrystals/cellulose core-in-shell nanocomposite assemblies

We report herein for the first time how a co-electrospinning technique can be used to overcome the issue of orienting cellulose nanocrystals within a neat cellulose matrix. A home-built co-electrospinning apparatus was fabricated that was comprised of a high-voltage power supply, two concentric capillary needles, and one screw-type pump syringe. Eucalyptus-derived cellulose was dissolved in N-methylmorpholine oxide (NMMO) at 120 degrees C and diluted with dimethyl sulfoxide (DMSO) which was used in the external concentric capillary needle as the shell solution. A cellulose nanocrystal suspension obtained by the sulfuric acid hydrolysis of bleached sisal and cotton fibers was used as the core liquid in the internal concentric capillary needle. Three flow rate ratios between the shell and core, four flow rates for the shell dope solution, and four high voltages were tested. The resultant co-electrospun composite fibers were collected onto a grounded metal screen immersed in cold water. Micrometer and submicrometer cellulose fiber assemblies were obtained which were reinforced with cellulose nanocrystals and characterized by FESEM, FTIR, TGA, and XRD. Surprisingly, it was determined that the physical properties for the cellulose controls are superior to the composites; in addition, the crystallinity of the controls was slightly greater.