Ion specific surface charge density of SBA-15 mesoporous silica

Multipurpose adsorption applications of boron-doped and amino-functionalized magnetic mesoporous silica nanocomposite

In this study, boron-doped magnetic mesoporous silica nanocomposite was prepared through the hydrothermal synthesis procedure followed by post modification with -NH2 groups. The higher surface area, more ordered mesoporous structure, and higher surface charge density obtained by boron doping and amino functionalization contributed to the use of nanocomposite for multipurpose application functions. When used as an adsorbent for light green (LG) anionic dye, boron-doped nanocomposite exhibited higher adsorption capacity (105.80 mg/g) compared to undoped nanocomposite (72.23 mg/g), while when used as a drug carrier for Doxorubicin (DOX), a sufficient drug loading capacity (48.0 mg/g) was obtained, which is also higher than that of undoped nanocomposite (30.3 mg/g). In terms of LG adsorption, the effects such as initial concentration, adsorbent dosage, time, pH, and temperature on the adsorption properties were investigated in detail. Adsorption kinetics, isotherms, thermodynamics, and reusability are discussed. The existence of small quantity of boron doping enhanced the surface charge density from 0.0393 to 0.2854 C/m2, which resulted in higher adsorption capacity for LG adsorption dominated by electrostatic attraction, and led to formation of silanol holes together with the -OH and -NH2 functional groups, which resulted in higher drug loading capacity for DOX adsorption dominated by hydrogen bonding. This promising result provides that boron-doped and -NH2 grafted magnetic mesoporous silica material can function as multipurpose adsorbent for various environmental applications.

Unipolar Ionic Diode Nanofluidic Membranes Enabled by Stepped Mesochannels for Enhanced Salinity Gradient Energy Harvesting

Developing ionic diode membranes featuring asymmetric structures is in high demand for salinity gradient energy harvesting. These membranes offer benefits in mitigating ion concentration polarization, thereby promoting ion permeability. However, most reported works focus on the role of heterogeneous charge-based bipolar ionic diode membranes for ion concentration polarization suppression, with comparatively less attention given to maintaining ion selectivity. Herein, unipolar ionic diode nanofluidic mesoporous silica membranes featuring stepped mesochannels were developed via a micellar sequential oriented interfacial self-assembly strategy as a salinity gradient energy harvester. Due to the asymmetric mesochannels and unipolar structure (both sides carry negative charge), the ionic diode membranes exhibit a strong rectification ratio of ∼15.91 to facilitate unidirectional ion transport while maintaining excellent cation selectivity (cation transfer number of ∼0.85). Besides, the vertically aligned mesochannels significantly reduce ion transport resistance, generating a high ionic flux. Consequently, the unipolar ionic diode nanofluidic membranes demonstrate a power output of 5.88 W/m2 between artificial sea and river water. The unipolar feature gives notable enhancements of 296% and 144% in power output compared to the symmetric membrane and bipolar ionic diode membrane, respectively. This work opens up new routes for designing ionic diode membranes for salinity gradient energy harvesting.

The Surface of Colloidal Metal-Organic Framework Nanoparticles Revealed by Vibrational Sum Frequency Scattering Spectroscopy

Solvation shells strongly influence the interfacial chemistry of colloidal systems, from the activity of proteins to the colloidal stability and catalysis of nanoparticles. Despite their fundamental and practical importance, solvation shells have remained largely undetected by spectroscopy. Furthermore, their ability to assemble at complex but realistic interfaces with heterogeneous and rough surfaces remains an open question. Here, we apply vibrational sum frequency scattering spectroscopy (VSFSS), an interface-specific technique, to colloidal nanocrystals with porous metal-organic frameworks (MOFs) as a case study. Due to the porous nature of the solvent-particle boundary, MOF particles challenge conventional models of colloidal and interfacial chemistry. Their multiweek colloidal stability in the absence of conventional surface ligands suggests that stability may arise in part from solvation forces. Spectra of colloidally stable Zn(2-methylimidazolate)2 (ZIF-8) in polar solvents indicate the presence of ordered solvation shells, solvent-metal binding, and spontaneous ordering of organic bridging linkers within the MOF. These findings help explain the unexpected colloidal stability of MOF colloids, while providing a roadmap for applying VSFSS to wide-ranging colloidal nanocrystals in general.

Mucoadhesive Dendrons Conjugated to Mesoporous Silica Nanoparticles as a Drug Delivery Approach for Orally Administered Biopharmaceuticals

Biological drugs are increasingly important for patients and industry due to their application in the treatment of common and potentially life-threatening diseases such as diabetes, cancer, and obesity. While most marketed biopharmaceuticals today are injectables, the potential of mucoadhesive delivery systems based on dendron-coated mesoporous silica nanoparticles for oral delivery of biological drugs is explored in this project. We hypothesize that specifically designed dendrons can be employed as mucoadhesive excipients and used to decorate the surface of nanoparticles with properties to embed a drug molecule. We initially tested a novel synthesis method for the preparation of dendrons, which was successfully validated by the chemical characterization of the compounds. The interaction between dendrons and mucin was studied through isothermal titration calorimetry and quartz crystal microbalance with dissipation monitoring and proved to be spontaneous and thermodynamically favorable. Dendrons were conjugated onto 244.4 nm mesoporous silica nanoparticles and characterized for chemical composition, size, and surface charge, which all showed a successful conjugation. Finally, dynamic light scattering was used to study the interaction between nanoparticles and porcine gastric mucin, whereas the interaction between nanoparticles and porcine intestinal mucus was characterized by rheological measurements. This study shows a deeper biophysical understanding of the interaction between nanoparticles and mucin or native porcine intestinal mucus, further leveraging the current understanding of how dendrons can be used as excipients to interact with mucin. This will provide knowledge for the potential development of a new generation of mucoadhesive nanoformulations for the oral delivery of biopharmaceuticals.

Perspectives on weak interactions in complex materials at different length scales

Nanocomposite materials consist of nanometer-sized quantum objects such as atoms, molecules, voids or nanoparticles embedded in a host material. These quantum objects can be exploited as a super-structure, which can be designed to create material properties targeted for specific applications. For electromagnetism, such targeted properties include field enhancements around the bandgap of a semiconductor used for solar cells, directional decay in topological insulators, high kinetic inductance in superconducting circuits, and many more. Despite very different application areas, all of these properties are united by the common aim of exploiting collective interaction effects between quantum objects. The literature on the topic spreads over very many different disciplines and scientific communities. In this review, we present a cross-disciplinary overview of different approaches for the creation, analysis and theoretical description of nanocomposites with applications related to electromagnetic properties.

pH-Regulated Single and Double Charge Inversions on PEI-Coated Surfaces

The pH-regulated charge inversions on polyethylenimine (PEI)-coated surfaces are indispensable to their applications in biomaterials and nanomaterials. Various PEI-coated surfaces, where single charge inversion happens, have been extensively investigated, while the surfaces where double charge inversion appears are less reported. Here, using a molecular theory, we systematically study the pH-regulated charge density of PEI-coated surfaces. The results suggest whether single or double charge inversion happens depends on PEI affinity to the surface and the bare surface charge density. The region of double charge inversion is much smaller than that of single charge inversion, revealing the reason why double charge inversion is less observed in experiments. Besides, the charge inversions are significantly influenced by the solution condition. The present work provides a useful guideline to the selection of the coated materials and the parameters of PEI solution in the design of PEI-coated surfaces aiming to promote their applications in multifunctional nanomaterials.

Role of Ions on the Surface-Bound Water Structure at the Silica/Water Interface: Identifying the Spectral Signature of Stability

Isolating the hydrogen-bonding structure of water immediately at the surface is challenging, even with surface-specific techniques like sum-frequency generation (SFG), because of the presence of aligned water further away in the diffuse layer. Here, we combine zeta potential and SFG intensity measurements with the maximum entropy method referenced to reported phase-sensitive SFG and second-harmonic generation results to deconvolute the SFG spectral contributions of the surface waters from those in the diffuse layer. Deconvolution reveals that at very low ionic strength, the surface water structure is similar to that of a neutral silica surface near the point-of-zero-charge with waters in different hydrogen-bonding environments oriented in opposite directions. This similarity suggests that the known metastability of silica colloids against aggregation under both conditions could arise from this distinct surface water structure. Upon the addition of salt, significant restructuring of water is observed, leading to a net decrease in order at the surface.

Interfacial Super-Assembly of Ordered Mesoporous Silica-Alumina Heterostructure Membranes with pH-Sensitive Properties for Osmotic Energy Harvesting

Osmotic energy existing between seawater and freshwater is a potential blue energy source that can mitigate the energy crisis and environmental pollution problems. Nanofluidic devices are widely utilized to capture this blue energy owing to their unique ionic transport properties in the nanometer scale. However, with respect to nanofluidic membrane devices, high membrane inner resistance and a low power density induced by disordered pores and thick coating as well as difficulty in manufacturing still impede their real-world applications. Here, we demonstrate an interfacial super-assembly strategy that is capable of fabricating ordered mesoporous silica/macroporous alumina (MS/AAO) framework-based nanofluidic heterostructure membranes with a thin and ordered mesoporous silica layer. The presence of a mesoporous silica layer with abundant silanol and a high specific surface area endows the heterostructure membrane with a low membrane inner resistance of about 7 KΩ, excellent ion selectivity, and osmotic energy conversion ability. The power density can reach up to 4.50 W/m² by mixing artificial seawater and river water through the membrane, which is 20 times higher than that of the conventional 2D nanofluidic membrane, and outperforms about 30% compared to other 3D porous membranes. More intriguingly, the interesting pH-sensitive osmotic energy conversion property of the MS/AAO membrane is subsequently recognized, which can realize a higher power density even in acidic or alkaline wastewater, expanding the application range, especially in practical applications. This work presents a valuable paradigm for the use of mesoporous materials in nanofluidic devices and provides a way for large-scale production of nanofluidic devices.

Understanding surface charge regulation in silica nanopores

Nanoporous silica is used in a wide variety of applications, ranging from bioanalytical tools and materials for energy storage and conversion as well as separation devices. The surface charge density of nanopores is not easily measured by experiment yet plays a vital role in the performance and functioning of silica nanopores. Herein, we report a theoretical model to describe charge regulation in silica nanopores by combining the surface-reaction model and the classical density functional theory (CDFT). The theoretical predictions provide quantitative insights into the effects of pH, electrolyte concentration, and pore size on the surface charge density and electric double layer structure. With a fixed pore size, the surface charge density increases with both pH and the bulk salt concentration similar to that for an open surface. At fixed pH and salt concentration, the surface charge density rises with the pore size until it reaches the bulk asymptotic value when the surface interactions become negligible. At high pH, the surface charge density is mainly determined by the ratio of the Debye screening length to the pore size (λ_D/D).

Internal surface electric charge characterization of mesoporous silica

Mesoporous silica is an emerging technology to solve problems of existing and to support projected revolutionary applications ranging from targeted drug delivery to artificial kidney. However, one of the major driving mechanisms, electric charging of internal mesoporous surfaces, has not been characterized yet. In the nanoscale confinements of mesoporous structures made of pore throats and pore voids, surface charges diverge from existing theoretical calculations and show local variation due to two occurrences. First, when the size of pore throat becomes comparable with the thickness of ionic layering forming on throats’ surfaces, ionic layers from opposite surfaces overlap so that ionic concentration on the surface becomes different than Boltzmann distribution predicts, and there will no longer be an equilibrium of zero electric potential at pore throat centers. Second, when this non zero potential inside throats becomes different than the potential of pore voids, ionic diffusion from void to throat creates axial ionic variation on surfaces. For such a case, we performed a pore level analysis on mesoporous internal surface charge at various porosities and ionic conditions. Pore parameters strongly affected the average internal charge which we characterized as a function of overlap ratio and porosity, first time in literature. Using this, a phenomenological model was developed as an extension of the existing theory to include nano-effects, to predict the average mesoporous internal surface charge as a function of EDL thickness, pore size and porosity.

pH-Dependent Inversion of Hofmeister Trends in the Water Structure of the Electrical Double Layer

Specific ion effects (SIEs) are known to influence the acid/base behavior of silica and the interfacial structure of water, yet evidence of the effect of pH on SIEs is lacking. Here broadband vibrational sum frequency generation (SFG) spectroscopy was used to study SIEs on the water structure at the electrical double layer (EDL) of silica as a function of pH and monovalent cation identity from pH 2-12 at 0.5 M salt concentration. SFG results indicate a direct Hofmeister series of cation adsorption at pH 8 (Li⁺ < Na⁺ < K⁺ < Cs⁺), with an inversion in this series occurring at pH > 10. In addition, an inversion in SFG intensity trends also occurred at pH < 6, which was attributed to contributions from asymmetric cation hydration and EDL overcharging. The highly pH-dependent SIEs for silica/water have implications for EDL models that often assume pH-independent parameters.

Adsorption and release of ampicillin antibiotic from ordered mesoporous silica

In this work the adsorption and the release of ampicillin - a β-lactam penicillin-like antibiotic - from MCM-41, SBA-15, and (amino functionalized) SBA-15-NH₂ ordered mesoporous silica (OMS) materials were investigated. The silica matrices differ for their pore size (SBA-15 vs. MCM-41) mainly, and also for surface charge (SBA-15 and MCM-41, vs. SBA-15-NH₂). OMS samples were characterized through small-angle X-rays scattering (SAXS), transmission electron microscopy (TEM), N₂ adsorption-desorption isotherms, Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and potentiometric titrations. The quantification of immobilized and released ampicillin was monitored by mean of UV-Vis spectroscopy. Experimental adsorption isotherms evidenced that ampicillin's loading is not related to the pore size (d_BJH) of the adsorbent. Indeed the maximal loadings were 237mg/g for SBA-15 (d_BJH=6.5nm), 278mg/g for MCM-41 (d_BJH=2.2nm), and 333mg/g for SBA-15-NH₂ (d_BJH=5.6nm). Loading seems, instead, to be related to the surface charge density (σ) of the sorbent surface. Indeed, at pH 7.4 ampicillin drug is negatively charged and likely prefers to interact with SBA-15-NH₂ (σ_SBA-15-NH2=+0.223Cm^-2) rather than the slightly negatively charged silicas (σ_SBA-15=-0.044Cm^-2 and σ_MCM-41=-0.033Cm^-2). Similarly, ampicillin release is affected by interfacial interactions. Indeed, we found a burst release from pure silica samples (SBA-15 and MCM-41), whereas a sustained one from SBA-15-NH₂ sample. We explain this behavior as a result of an attractive interaction between the protonated amino group of SBA-15-NH₂ and the negatively charged carboxylate group of ampicillin. In summary, in order to obtain a sustained drug release, the chemical nature of the matrix's surface plays a role which is more important than its textural features. SBA-15-NH₂ matrix is hence a suitable candidate for local sustained release of antibiotic drugs.

Synthesis of a Cu-infiltrated Zr-doped SBA-15 catalyst for CO2hydrogenation into methanol and dimethyl ether

A catalytically active nanoassembly comprising Cu-nanoparticles grown on integrated and active supports (large pore Zr-doped mesoporous SBA-15 silica) has been synthesized and used to promote CO₂hydrogenation.

Enhanced energy harvesting by concentration gradient-driven ion transport in SBA-15 mesoporous silica thin films

Nanofluidic energy harvesting systems have attracted interest in the field of battery application, particularly for miniaturized electrical devices, because they possess excellent energy conversion capability for their size. In this study, a mesoporous silica (MPS)-based nanofluidic energy harvesting system was fabricated and selective ion transport in mesopores as a function of the salt gradient was investigated. Aqueous solutions with three different kinds of monovalent electrolytes-KCl, NaCl, and LiCl-with different diffusion coefficients (D₊) were considered. The highest power density was 3.90 W m^-2 for KCl, followed by 2.39 W m^-2 for NaCl and 1.29 W m^-2 for LiCl. Furthermore, the dependency of power density on the type of cation employed indicates that the harvested energy increases as the cation mobility increases, particularly at high concentrations. This cation-specific dependency suggests that the maximum power density increases by increasing the diffusion coefficient ratio of cations to anions, making this ratio a critical parameter in enhancing the performance of nanofluidic energy harvesting systems with extremely small pores ranging from 2 to 3 nm.

pKa at Quartz/Electrolyte Interfaces

Acidity of silanol sites at the crystalline quartz/aqueous electrolyte (NaCl, NaI, KCl) interfaces are calculated from ab initio molecular dynamics simulations. pKa's are found to follow a combination of the cationic and anionic Hofmeister series in the order pKa(neat solution) < pKa(NaCl) < pKa(NaI) < pKa(KCl), in agreement with experimental measurements. Rationalization of this ranking is achieved in terms of the microscopic local solvation of the protonated silanols and their conjugated bases, the silanolates SiO(-). The change in the pKa is the result of both water destructuring by alkali halides, as well as of the specific cation/SiO(-) interaction, depending on the electrolyte. Molecular modeling at the atomistic level is required to achieve such comprehension, with ab initio molecular dynamics being able to model complex inhomogeneous charged interfaces and the associated interfacial chemical reactivity.

Secondary Confinement of Water Observed in Eutectic Melting of Aqueous Salt Systems in Nanopores

Freezing and melting of aqueous solutions of alkali halides confined in the cylindrical nanopores of MCM-41 and SBA-15 silica was probed by differential scanning calorimetry (DSC). We find that the confinement-induced shift of the eutectic temperature in the pores can be significantly greater than the shift of the melting temperature of pure water. Greatest shifts of the eutectic temperature are found for salts that crystallize as oligohydrates at the eutectic point. This behavior is explained by the larger fraction of pore volume occupied by salt hydrates as compared to anhydrous salts, on the assumption that precipitated salt constitutes an additional confinement for ice/water in the pores. A model based on this secondary confinement effect gives a good representation of the experimental data. Salt-specific secondary confinement may play a role in a variety of fields, from salt-impregnated advanced adsorbents and catalysts to the thermal weathering of building materials.

Influence of surface functionalization on the hydrophilic character of mesoporous silica nanoparticles

We report the synthesis and surface functionalization of MCM-41-like mesoporous silica nanoparticles (MSNs) with spheroidal shape and particle size of 141 ± 41 nm. The success of surface functionalization with aminopropyl and sodium ethylcarboxylate groups (giving amino-MSN and carboxy-MSN, respectively) was ascertained by infrared spectroscopy and ζ potential measurements. The former showed the decrease of surface silanol groups and the corresponding appearance of signals related to NH2 bending mode (δNH2) at 1595 cm(-1) and COO(-) stretching (νas and νsym) at 1562 and 1418 cm(-1). The latter showed a change in surface charge, in that the isoelectric point (IEP) changed from pH 3-4.5 to 8.5 when the MSN was functionalized with the amino groups, while carboxy-MSN showed a more negative charge in the whole pH range with respect to MSN. The hydrophilic character of the prepared materials was ascertained by quantitative microgravimetric measurements, allowing the calculation of the average isosteric adsorption heat (q[combining macron]st). This was found to be 51 ± 3 kJ mol(-1), 61 ± 4, and 65 ± 3 kJ mol(-1) for MSN, amino-MSN, and carboxy-MSN samples, respectively. The increase in q[combining macron]st after functionalization can be ascribed to the specific interaction of water molecules with the functionalizing agents, in agreement with a higher basicity with respect to silanol groups. Moreover, the possibility of multiple H-bonding interactions of water molecules with the carboxylate anion is put forward to account for the higher water uptake with respect to parent MSN.

Adsorption of lysozyme on hyaluronic acid functionalized SBA-15 mesoporous silica: a possible bioadhesive depot system

Silica-based ordered mesoporous materials are very attractive matrices to prepare smart depot systems for several kinds of therapeutic agents. This work focuses on the well-known SBA-15 mesoporous silica and lysozyme, an antimicrobial protein. In order to improve the bioadhesion properties of SBA-15 particles, the effect of hyaluronic acid (HA) functionalization on lysozyme adsorption was investigated. SBA-15 samples having high (H-SBA) and low (L-SBA) levels of functionalization were analyzed during the three steps of the preparations: (1) introduction of the -NH2 groups to obtain the SBA-NH2 samples; (2) functionalization with HA to obtain the SBA-HA matrices; (3) adsorption of lysozyme. All silica matrices were characterized through N2-adsorption/desorption isotherms, small-angle X-ray scattering, transmission electron microscopy, thermogravimetric analysis, and Fourier transform infrared spectroscopy. The whole of the experimental data suggests that a high level of functionalization of the silica surface allows for a negligible lysozyme adsorption mainly due to unfavorable electrostatic interactions (H-SBA-NH2) or steric hindrance (H-SBA-HA). A low degree of functionalization of the silica surface brings about a very good performance toward lysozyme adsorption, being 71% (L-SBA-NH2) and 63% (L-SBA-HA) respectively, compared to that observed for original SBA-15. Finally, two different kinetic models--a "pseudo-second order" and a "intraparticle diffusion"--were compared to fit lysozyme adsorption data, the latter being more reliable than the former.

Packaging biological cargoes in mesoporous materials: opportunities for drug delivery

INTRODUCTION

Confinement of biomolecules in structured nanoporous materials offers several desirable features ranging from chemical and thermal stability, to resistance to degradation from the external environment. A new generation of mesoporous materials presents exciting new possibilities for the formulation and controlled release of biological agents. Such materials address niche applications in enteral and parenteral delivery of biologics, such as peptides, polypeptides, enzymes and proteins for use as therapeutics, imaging agents, biosensors, and adjuvants.

AREAS COVERED

Mesoporous silica Santa Barbara Amorphous-15 (SBA-15), with its unique, tunable pore diameter, and easily functionalized surface, provides a representative example of this new generation of materials. Here, we review recent advances in the design and synthesis of nanostructured mesoporous materials, focusing on SBA-15, and highlight opportunities for the delivery of biological agents to various organ and tissue compartments.

EXPERT OPINION

The SBA-15 platform provides a delivery carrier that is inherently separated from the active biologic due to distinct intra and extra-particle environments. This permits the SBA-15 platform to not require direct modification of the active biological therapeutic. Additionally, this makes the platform universal and allows for its application independent of the desired methods of discovery and development. The SBA-15 platform also directly addresses issues of targeted delivery and controlled release, although future challenges in the implementation of this platform reside in particle design, biocompatibility, and the tunability of the internal and external material properties. Examples illustrating the flexibility in the application of the SBA-15 platform are also discussed.

Detection and characterization of liquid|solid and liquid|liquid|solid interfacial gradients of water nanodroplets in wet N-octyl-2-pyrrolidone

We report on the rotational diffusion dynamics and fluorescence lifetime of lissamine rhodamine B sulfonyl chloride (LRSC) in two thin-film experimental configurations. These are liquid|solid interfaces, where N-octyl-2-pyrrolidone (NOP) containing water and ethylene glycol (EG) thin films are each supported on glass, and a liquid|liquid|solid interface where thin films of water and NOP, both supported on glass, are in contact with one another, forming an NOP|water interface. The reorientation dynamics and fluorescence lifetime of LRSC are measured as a function of distance from the NOP|glass and EG|glass interfaces and from the NOP|water and NOP|glass interfaces in the liquid|liquid|solid experimental configuration. Fluorescence anisotropy decay data from the liquid|solid systems reveal a liquid film depth-dependent gradient spanning tens of micrometers from the NOP|glass interface into the wet NOP phase, while this gradient is absent in EG. We interpret these findings in the context of a compositional gradient in the NOP phase. The spatially resolved fluorescence lifetime and anisotropy decay data for an NOP|water|glass interfacial structure exhibits the absence of a gradient in the anisotropy decay profile normal to the NOP|water interface and the presence of a fluorescence lifetime gradient as a function of distance from the NOP|water interface. The compositional heterogeneity for both interfacial systems is in the form of water nanodroplets in the NOP phase. We understand this compositional gradient in the context of the relative surface energies of the water, NOP, and glass components.

Models and mechanisms of Hofmeister effects in electrolyte solutions, and colloid and protein systems revisited

Specific effects of electrolytes have posed a challenge since the 1880's. The pioneering work was that of Franz Hofmeister who studied specific salt induced protein precipitation. These effects are the rule rather the exception and are ubiquitous in chemistry and biology. Conventional electrostatic theories (Debye-Hückel, DLVO, etc.) cannot explain such effects. Over the past decades it has been recognised that additional quantum mechanical dispersion forces with associated hydration effects acting on ions are missing from theory. In parallel Collins has proposed a phenomenological set of rules (the law of matching water affinities, LMWA) which explain and bring to order the order of ion-ion and ion-surface site interactions at a qualitative level. The two approaches appear to conflict. Although the need for inclusion of quantum dispersion forces in one form or another is not questioned, the modelling has often been misleading and inappropriate. It does not properly describe the chemical nature (kosmotropic/chaotropic or hard/soft) of the interacting species. The success of the LMWA rules lies in the fact that they do. Here we point to the way that the two apparently opposing approaches might be reconciled. Notwithstanding, there are more challenges, which deal with the effect of dissolved gas and its connection to 'hydrophobic' interactions, the problem of water at different temperatures and 'water structure' in the presence of solutes. They take us to another dimension that requires the rebuilding of theoretical foundations.

From self-assembly fundamental knowledge to nanomedicine developments

This review highlights the key role of NMR techniques in demonstrating the molecular aspects of the self-assembly of surfactant molecules that nowadays constitute the basic knowledge which modern nanoscience relies on. The aim is to provide a tutorial overview. The story of a rigorous scientific approach to understand self-assembly in surfactant systems and biological membranes starts in the early seventies when the progresses of SAXRD and NMR technological facilities allowed to demonstrate the existence of ordered soft matter, and the validity of Tanford approach concerning self-assembly at a molecular level. Particularly, NMR quadrupolar splittings, NMR chemical shift anisotropy, and NMR relaxation of dipolar and quadrupolar nuclei in micellar solutions, microemulsions, and liquid crystals proved the existence of an ordered polar-apolar interface, on the NMR time scale. NMR data, rationalized in terms of the two-step model of relaxation, allowed to quantify the dynamic aspects of the supramolecular aggregates in different soft matter systems. In addition, NMR techniques allowed to obtain important information on counterion binding as well as on size of the aggregate through molecular self-diffusion. Indeed NMR self-diffusion proved without any doubt the existence of bicontinuous microemulsions and bicontinuous cubic liquid crystals, suggested by pioneering and brilliant interpretation of SAXRD investigations. Moreover, NMR self-diffusion played a fundamental role in the understanding of microemulsion and emulsion nanostructures, phase transitions in phase diagrams, and particularly percolation phenomena in microemulsions. Since the nineties, globalization of the knowledge along with many other technical facilities such as electron microscopy, particularly cryo-EM, produced huge progresses in surfactant and colloid science. Actually we refer to nanoscience: bottom up/top down strategies allow to build nanodevices with applications spanning from ICT to food technology. Developments in the applied fields have also been addressed by important progresses in theoretical skills aimed to understand intermolecular forces, and specific ion interactions. Nevertheless, this is still an open question. Our predictive ability has however increased, hence more ambitious targets can be planned. Nanomedicine represents a major challenging field with its main aims: targeted drug delivery, diagnostic, theranostics, tissue engineering, and personalized medicine. Few recent examples will be mentioned. Although the real applications of these systems still need major work, nevertheless new challenges are open, and perspectives based on integrated multidisciplinary approaches would enable both a deeper basic knowledge and the expected advances in biomedical field.

Bridging interactions of proteins with silica nanoparticles: the influence of pH, ionic strength and protein concentration

Charge-driven bridging of nanoparticles by macromolecules represents a promising route for engineering functional structures, but the strong electrostatic interactions involved when using conventional polyelectrolytes impart irreversible complexation and ill-defined structures. Recently it was found that the electrostatic interaction of silica nanoparticles with small globular proteins leads to aggregate structures that can be controlled by pH. Here we study the combined influence of pH and electrolyte concentration on the bridging aggregation of silica nanoparticles with lysozyme in dilute aqueous dispersions. We find that protein binding to the silica particles is determined by pH irrespective of the ionic strength. The hetero-aggregate structures formed by the silica particles with the protein were studied by small-angle X-ray scattering (SAXS) and the structure factor data were analyzed on the basis of a short-range square-well attractive pair potential (close to the sticky-hard-sphere limit). It is found that the electrolyte concentration has a strong influence on the stickiness near pH 5, where the weakly charged silica particles are bridged by the strongly charged protein. An even stronger influence of the electrolyte is found in the vicinity of the isoelectric point of the protein (pI = 10.7) and is attributed to shielding of the repulsion between the highly charged silica particles and hydrophobic interactions between the bridging protein molecules.

Electrorheological fluids based on metallo-supramolecular polyelectrolyte-silicate composites

We present an innovative concept for the design of electrorheological fluids (ERF) based on a dispersed phase of rigid-rod-shaped metallo-supramolecular polyelectrolytes (MEPE) intercalated in mesoporous SBA-15 silica. While applying an electric field to this composite dispersed in silicone oil, rheological measurements reveal a strong increase in the storage modulus, indicating the solidification of the fluid. Besides the strong electrorheological effect and the low current densities, we note that the required amount of MEPE is five times lower than in comparable host-guest ERFs. Composites based on mononuclear complexes do not show a comparable electrorheological effect.

Hofmeister challenges: ion binding and charge of the BSA protein as explicit examples

Experiments on bovine serum albumin (BSA) via potentiometric titration (PT) and electrophoretic light scattering (ELS) are used to study specific-ion binding. The effect is appreciable at a physiological concentration of 0.1 M. We found that anions bind to the protein surface at an acidic pH, where the protein carries a positive charge (Z(p) > 0), according to a Hofmeister series (Cl(-) < Br(-) < NO(3)(-) < I(-) < SCN(-)), as well as at the isoionic point (Z(p) = 0). The results obtained require critical interpretation. The measurements performed depend on electrostatic theories that ignore the very specific effects they are supposed to reveal. Notwithstanding this difficulty, we can still infer that different 1:1 sodium salts affect the BSA surface charge/pH curve because anions bind to the BSA surface with an efficiency which follows a Hofmeister series.

Specific Cation Effects on the Bimodal Acid-Base Behavior of the Silica/Water Interface

Using nonresonant second harmonic generation spectroscopy, we have monitored the change in surface charge density of the silica/water interface over a broad pH range in the presence of different alkali chlorides. Planar silica is known to possess two types of surface sites with pKa values of ∼4 and ∼9, which are attributed to different solvation environments of the silanols. We report that varying the alkali chloride electrolyte significantly changes the effective acid dissociation constant (pKa(eff)) for the less acidic silanol groups, with the silica/NaClaq and silica/CsClaq interfaces exhibiting the lowest and highest pKa(eff) values of 8.3(1) and 10.8(1), respectively. Additionally, the relative populations of the two silanol groups are also very sensitive to the electrolyte identity. The greatest percentage of acidic silanol groups was 60(2)% for the silica/LiClaq interface in contrast to the lowest value of 20(2)% for the silica/NaClaq interface. We attribute these changes in the bimodal behavior to the influence of alkali ions on the interfacial water structure and its corresponding effect on surface acidity.

Disentangling protein-silica interactions

We present the results of modelling studies aimed at the understanding of the interaction of a 7 nm sized water droplet containing a negatively charged globular protein with flat silica surfaces. We show how the droplet interaction with the surface depends on the electrostatic surface charge, and that adhesion of the droplet occurs when the surface is negatively charged as well. The key role of water and of the charge-balancing counter ions in mediating the surface-protein adhesion is highlighted. The relevance of the present results with respect to the production of bioinorganic hybrids via encapsulation of proteins inside mesoporous silica materials is discussed.

Ion transport in mesoporous silica SBA-16 thin films with 3D cubic structures

Mesoporous silica SBA-16 thin films with highly ordered 3D cubic structures were synthesized on a Si substrate via the dip-coating method. After these films were filled with KCl aqueous solutions, the ionic current passing through the mesopores was measured by applying dc electric fields. At low ion concentrations, the measured I-V curves were nonlinear and the current increased exponentially with respect to voltage. As the ion concentration increased, the I-V curve approached linear behavior. The nonlinear behavior of I-V curves can be reasonably attributed to the electric potential barrier created in nanopores.