On-chip dielectrophoretic coassembly of live cells and particles into responsive biomaterials

Reconfigurable Growth of Engineered Living Materials

The growth of multicellular organisms is a process akin to additive manufacturing where cellular proliferation and mechanical boundary conditions, among other factors, drive morphogenesis. Engineers have limited ability to engineer morphogenesis to manufacture goods or to reconfigure materials comprised of biomass. Herein, a method that uses biological processes to grow and regrow magnetic engineered living materials (mELMs) into desired geometries is reported. These composites contain Saccharomyces cerevisiae and magnetic particles within a hydrogel matrix. The reconfigurable manufacturing process relies on the growth of living cells, magnetic forces, and elastic recovery of the hydrogel. The mELM then adopts a form in an external magnetic field. Yeast within the material proliferates, resulting in 259 ± 14% volume expansion. Yeast proliferation fixes the magnetic deformation, even when the magnetic field is removed. The shape fixity can be up to 99.3 ± 0.3%. The grown mELM can recover up to 73.9 ± 1.9% of the original form by removing yeast cell walls. The directed growth and recovery process can be repeated at least five times. This work enables ELMs to be processed and reprocessed into user-defined geometries without external material deposition.

Controlled Transport of Individual Microparticles Using Dielectrophoresis

A dielectrophoretic device employing a planar array of microelectrodes is designed for controlled transport of individual microparticles. By exciting the electrodes in sequence, a moving dielectrophoretic force is created that can drag a particle across the electrodes in a straight line. The electrode shapes are designed to counter any lateral drift of the trapped particle during transport. This facilitates single particle transport by creating a narrow two-dimensional corridor for the moving dielectrophoretic force to operate on. The design and analysis processes are discussed in detail. Numerical simulations are performed to calculate the electromagnetic field distribution and the generated dielectrophoretic force near the electrodes. The Langevin equation is used for analyzing the trajectory of a microparticle under the influence of the external forces. The simulations show how the designed electrode geometry produces the necessary lateral confinement required for successful particle transport. Finally, experimental results are presented showing controlled bidirectional linear transport of single polystyrene beads of radius 10 and 5 μm for a distances 840 and 1100 μm, respectively. The capabilities of the proposed platform make it suitable for micro total analysis systems (μTAS) and lab-on-a-chip (LOC) applications.

Reversible Design of Dynamic Assemblies at Small Scales

Emerging bottom-up fabrication methods have enabled the assembly of synthetic colloids, microrobots, living cells, and organoids to create intricate structures with unique properties that transcend their individual components. This review provides an access point to the latest developments in externally driven assembly of synthetic and biological components. In particular, we emphasize reversibility, which enables the fabrication of multiscale systems that would not be possible under traditional techniques. Magnetic, acoustic, optical, and electric fields are the most promising methods for controlling the reversible assembly of biological and synthetic subunits since they can reprogram their assembly by switching on/off the external field or shaping these fields. We feature capabilities to dynamically actuate the assembly configuration by modulating the properties of the external stimuli, including frequency and amplitude. We describe the design principles which enable the assembly of reconfigurable structures. Finally, we foresee that the high degree of control capabilities offered by externally driven assembly will enable broad access to increasingly robust design principles towards building advanced dynamic intelligent systems.

Cell membrane engineering with synthetic materials: Applications in cell spheroids, cellular glues and microtissue formation

Biologically inspired materials with tunable bio- and physicochemical properties provide an essential framework to actively control and support cellular behavior. Cell membrane remodeling approaches benefit from the advances in polymer science and bioconjugation methods, which allow for the installation of un-/natural molecules and particles on the cells' surface. Synthetically remodeled cells have superior properties and are under intense investigation in various therapeutic scenarios as cell delivery systems, bio-sensing platforms, injectable biomaterials and bioinks for 3D bioprinting applications. In this review article, recent advances in the field of cell surface remodeling via bio-chemical means and the potential biomedical applications of these emerging cell hybrids are discussed. STATEMENT OF SIGNIFICANCE: Recent advances in bioconjugation methods, controlled/living polymerizations, microfabrication techniques and 3D printing technologies have enabled researchers to probe specific cellular functions and cues for therapeutic and research purposes through the formation of cell spheroids and polymer-cell chimeras. This review article highlights recent non-genetic cell membrane engineering strategies towards the fabrication of cellular ensembles and microtissues with interest in 3D in vitro modeling, cell therapeutics and tissue engineering. From a wider perspective, these approaches may provide a roadmap for future advances in cell therapies which will expedite the clinical use of cells, thereby improving the quality and accessibility of disease treatments.

A review of polystyrene bead manipulation by dielectrophoresis

Exploitation of the intrinsic electrical properties of particles has recently emerged as an appealing approach for trapping and separating various scaled particles. Initiative particle manipulation by dielectrophoresis (DEP) showed remarkable advantages including high speed, ease of handling, high precision and being label-free. Herein, we provide a general overview of the manipulation of polystyrene (PS) beads and related particles via DEP; especially, the wide applications of these manipulated PS beads in the quantitative evaluation of device performance for model validation and standardization have been discussed. The motion and polarizability of the PS beads induced by DEP were analyzed and classified into two categories as positive and negative DEP within the time and space domains. The DEP techniques used for bioparticle manipulation were demonstrated, and their applications were conducted in four fields: trapping of single-sized PS beads, separation of multiple-sized PS beads by size, separation of PS beads and non-bioparticles, and separation of PS beads and bioparticles. Finally, future perspectives on DEP-on-a-chip have been proposed to discriminate bio-targets in the network of microfluidic channels.

Probing Contaminant-Induced Alterations in Chlorophyll Fluorescence by AC-Dielectrophoresis-Based 2D-Algal Array

The investigation of contaminant impact on algae requires rapid and reliable cell collection and optical detection. The capability of alternative current (AC) dielectrophoresis (DEP) collection of whole cell arrays with combined fluorescence microscopy detection to follow the alterations of chlorophyll fluorescence during environmental contaminant exposure was explored. The application of an AC-field of 100 V cm^-1, 100 Hz for 30 min to capture and immobilize the cells of green alga Chlamydomonas reinhardtii in two-dimensional (2D) arrays does not induce changes in chlorophyll fluorescence. The results demonstrate that DEP-based 2D-arrays allow non-invasive detection of chlorophyll fluorescence change upon exposure to high concentrations of copper oxide nanoparticles and ionic copper. These results were in agreement with data obtained by flow cytometry used as a comparative method. The tool was also applied to follow the effect of a number of ubiquitous contaminants such as inorganic mercury, methylmercury, and diuron. However, a statistically significant short-term effect was observed only for mercury. Overall, DEP-based 2D-arrays of algal cells with fluorescence detection appear to be suitable for stain-free probing the effects on the photosynthetic microorganisms in highly polluted environment.

Template-Free Assembly in Living Bacterial Suspension under an External Electric Field

Although template-assisted self-assembly methods are very popular in materials and biological systems, they have certain limitations such as lack of tunability and switchable functionality because of the irreversible association of cells and their matrix components. With an aim to achieve more tunability, we have made an attempt to investigate the self-assembly behavior of rod-shaped living bacteria subjected to an external alternating electric field using confocal microscopy. We demonstrate that rod-shaped living bacteria dispersed in a low salinity aqueous medium form different types of reversible freely suspended structures when subjected to an external alternating electric field. At low field strength, an oriented phase is observed where individual bacterium orients with its major axis aligned along the field direction. At intermediate field strength, bacteria align in the form of one-dimensional (1D) chains that lie along the field direction. Further, at high field strength, more bacteria associate with these 1D chains laterally to form a two-dimensional (2D) array. At higher bacterial concentration, these field-induced 2D arrays extend to form three-dimensional columnar structures. These results are discussed in the context of previously reported studies on bacterial self-assembly.

Alternating Current-Dielectrophoresis Collection and Chaining of Phytoplankton on Chip: Comparison of Individual Species and Artificial Communities

The capability of alternating current (AC) dielectrophoresis (DEP) for on-chip capture and chaining of the three species representative of freshwater phytoplankton was evaluated. The effects of the AC field intensity, frequency and duration on the chaining efficiency and chain lengths of green alga Chlamydomonas reinhardtii, cyanobacterium Synechocystis sp. and diatom Cyclotella meneghiniana were characterized systematically. C. reinhardtii showed an increase of the chaining efficiency from 100 Hz to 500 kHz at all field intensities; C. meneghiniana presented a decrease of chaining efficiency from 100 Hz to 1 kHz followed by a significant increase from 1 kHz to 500 kHz, while Synechocystis sp. exhibited low chaining tendency at all frequencies and all field intensities. The experimentally-determined DEP response and cell alignment of each microorganism were in agreement with their effective polarizability. Mixtures of cells in equal proportion or 10-times excess of Synechocystis sp. showed important differences in terms of chaining efficiency and length of the chains compared with the results obtained when the cells were alone in suspension. While a constant degree of chaining was observed with the mixture of C. reinhardtii and C. meneghiniana, the presence of Synechocystis sp. in each mixture suppressed the formation of chains for the two other phytoplankton species. All of these results prove the potential of DEP to discriminate different phytoplankton species depending on their effective polarizability and to enable their manipulation, such as specific collection or separation in freshwater.

Multidirectional colloidal assembly in concurrent electric and magnetic fields

Dipolar interactions between nano- and micron sized colloids lead to their assembly into domains with well-defined local order. The particles with a single dipole induced by an external field assemble into linear chains and clusters. However, to achieve the formation of multidirectionally organized nano- or microassemblies with tunable physical characteristics, more sophisticated interaction tools are needed. Here we demonstrate that such complex interactions can be introduced in the form of two independent, non-interacting dipoles (double-dipoles) within a microparticle. We show how this can be achieved by the simultaneous application of alternating current (AC)-electric field and uniform magnetic field to dispersions of superparamagnetic microspheres. Depending on their timing and intensity, concurrent electric and magnetic fields lead to the formation of bidirectional particle chains, colloidal networks, and discrete crystals. We investigate the mechanistic details of the assembly process, and identify and classify the non-equilibrium states formed. The morphologies of different experimental states are in excellent correlation with our theoretical predictions based on Brownian dynamics simulations combined with a structural analysis based on local energy parameters. This novel methodology of introducing and interpreting double-dipolar particle interactions may assist in the assembly of colloidal coatings, dynamically reconfigurable particle networks, and bidirectional active structures.

Contact-Free Templating of 3-D Colloidal Structures Using Spatially Nonuniform AC Electric Fields

The formation of ordered and regularly shaped structures of colloidal particles with the aid of spatially nonuniform electric fields is a modern research area of great interest. This work illustrates how alternating current (AC) electrokinetic effects (dielectrophoresis, electroosmosis) can serve as contact-free templates, inside which colloidal microspheres can assemble into a variety of shapes and sizes. We show how three-dimensional colloidal structures of square, circular, and diamond shape of many tens of micrometers in size can be reproducibly formed with a single set of quadrupolar microelectrodes. Numerical simulations performed help to explain the role of AC electroosmosis and AC dielectrophoresis on the shaping of these structures as a function of applied voltage and frequency. We also demonstrate how the templating repertoire is further enhanced with the simultaneous application of a second, individually controlled AC electric field, which enables a variety of asymmetric colloidal structures to be produced using the same set of quadrupolar microelectrodes. As the preservation of shape and size of such electric-field templated structures after medium evaporation still remains a big challenge, here we also report on a novel method that permits the stabilization and isolation of these particle assemblies through medium gelation and subsequent hydrogel removal with a UV/ozone treatment.

Platinum black electrodeposited thread based electrodes for dielectrophoretic assembly of microparticles

We report dielectrophoretic (DEP) assembly of biological cells and microparticles using platinum-black electrodeposited conductive textile fiber. The three-dimensional conductive structures with high aspect ratios were found to facilitate high electric field regions, as revealed by scanning electron microscope characterization. The effective conducting area (Aeff) and its stability of thread electrodes were estimated using electrochemical methods. Potential of platinum black electrodeposited thread as 3-D electrodes for creating high gradient electrical field for dielectrophoretic assembly of microspheres and Saccharomyces cerevisiae (yeast cells) into 1D and two-dimensional structures over long ranges under the application of low voltages (4-10 Vpp) has been demonstrated. The formation of highly ordered pearl chains of microparticles using thread electrodes when subjected to dielectrophoresis (DEP) has been discussed in detail.

A poly(2-(dimethylamino)ethyl methacrylate-co-methacrylic acid) complex induced route to fabricate a super-hydrophilic hydrogel and its controllable oil/water separation

Thermo and pH dual-controllable oil/water separation materials are successfully fabricated by free radical polymerization of 2-(dimethylamino)ethyl methacrylate (DMAEMA) and methacrylic acid (MAA).

Anatomy of Nanoscale Propulsion

Nature supports multifaceted forms of life. Despite the variety and complexity of these forms, motility remains the epicenter of life. The applicable laws of physics change upon going from macroscales to microscales and nanoscales, which are characterized by low Reynolds number (Re). We discuss motion at low Re in natural and synthetic systems, along with various propulsion mechanisms, including electrophoresis, electrolyte diffusiophoresis, and nonelectrolyte diffusiophoresis. We also describe the newly uncovered phenomena of motility in non-ATP-driven self-powered enzymes and the directional movement of these enzymes in response to substrate gradients. These enzymes can also be immobilized to function as fluid pumps in response to the presence of their substrates. Finally, we review emergent collective behavior arising from interacting motile species, and we discuss the possible biomedical applications of the synthetic nanobots and microbots.

One-Dimensional Au-ZnO Heteronanostructures for Ultraviolet Light Detectors by a Two-Step Dielectrophoretic Assembly Method

One-dimensional ZnO decorated with metal nanoparticles has received much attention in the field of ultraviolet light detection because of its high photosensitivity and fast response, while how to form effective metal-ZnO heterostructures cost efficiently is still in development. We report an efficient and well-controlled method to form Au-ZnO heterostructures by two-step dielectrophoretic assembly. First, ZnO nanowires dispersed in deionized water were assembled dielectrophoretically in a planar microelectrode system. To control the number and position of assembled ZnO nanowires, a planar triangle-shaped microelectrode pair was imposed with a high-frequency ac voltage signal in this assembly process. Then a droplet of Au nanoparticle suspension was applied to decorate the preformed ZnO nanowire by another dielectrophoretic assembly process. The near-field dielectrophoretic force induced by the existence of ZnO nanowire spanning the electrode gap attracts Au nanoparticles onto the surface of ZnO nanowires and forms effective Au-ZnO heterostructures. After the adsorption of Au nanoparticles, the performances of Au-ZnO heteronanostructures in UV detection were studied. Experimental results indicate that the ratio of the photo-to-dark current of the Au-ZnO heteronanostucture-based detector was improved significantly, and the photoresponse was accelerated considerably. This kind of enhancement in performance can be attributed to the localized Schottky junctions on the surface of ZnO nanowire which improves the surface band bending.

Two-Dimensional Algal Collection and Assembly by Combining AC-Dielectrophoresis with Fluorescence Detection for Contaminant-Induced Oxidative Stress Sensing

An alternative current (AC) dielectrophoretic lab-on-chip setup was evaluated as a rapid tool of capture and assembly of microalga Chlamydomonas reinhardtii in two-dimensional (2D) close-packed arrays. An electric field of 100 V·cm⁻¹, 100 Hz applied for 30 min was found optimal to collect and assemble the algae into single-layer structures of closely packed cells without inducing cellular oxidative stress. Combined with oxidative stress specific staining and fluorescence microscopy detection, the capability of using the 2D whole-cell assembly on-chip to follow the reactive oxygen species (ROS) production and oxidative stress during short-term exposure to several environmental contaminants, including mercury, methylmercury, copper, copper oxide nanoparticles (CuO-NPs), and diuron was explored. The results showed significant increase of the cellular ROS when C. reinhardtii was exposed to high concentrations of methylmercury, CuO-NPs, and 10⁻⁵ M Cu. Overall, this study demonstrates the potential of combining AC-dielectrophoretically assembled two-dimensional algal structures with cell metabolic analysis using fluorescence staining, as a rapid analytical tool for probing the effect of contaminants in highly impacted environment.

Particle clustering during pearl chain formation in a conductive-island based dielectrophoretic assembly system

Particle clustering during pearl chain formation in a conductive-island based dielectrophoretic assembly system.

Taking advantage of reduced droplet-surface interaction to optimize transport of bioanalytes in digital microfluidics

Digital microfluidics (DMF), a technique for manipulation of droplets, is a promising alternative for the development of "lab-on-a-chip" platforms. Often, droplet motion relies on the wetting of a surface, directly associated with the application of an electric field; surface interactions, however, make motion dependent on droplet contents, limiting the breadth of applications of the technique. Some alternatives have been presented to minimize this dependence. However, they rely on the addition of extra chemical species to the droplet or its surroundings, which could potentially interact with droplet moieties. Addressing this challenge, our group recently developed Field-DW devices to allow the transport of cells and proteins in DMF, without extra additives. Here, the protocol for device fabrication and operation is provided, including the electronic interface for motion control. We also continue the studies with the devices, showing that multicellular, relatively large, model organisms can also be transported, arguably unaffected by the electric fields required for device operation.

High resolution scanning electron microscopy of cells using dielectrophoresis

Ultrastructural analysis of cells can reveal valuable information about their morphological, physiological, and biochemical characteristics. Scanning electron microscopy (SEM) has been widely used to provide high-resolution images from the surface of biological samples. However, samples need to be dehydrated and coated with conductive materials for SEM imaging. Besides, immobilizing non-adherent cells during processing and analysis is challenging and requires complex fixation protocols. In this work, we developed a novel dielectrophoresis based microfluidic platform for interfacing non-adherent cells with high-resolution SEM at low vacuum mode. The system enables rapid immobilization and dehydration of samples without deposition of chemical residues over the cell surface. Moreover, it enables the on-chip chemical stimulation and fixation of immobilized cells with minimum dislodgement. These advantages were demonstrated for comparing the morphological changes of non-budding and budding yeast cells following Lyticase treatment.

Analysis of the field-assisted permanent assembly of oppositely charged particles

We characterize experimentally and analyze analytically a novel electric-field-assisted process for the assembly of permanent chains of oppositely charged microparticles in an aqueous environment. Long chains of oppositely charged particles are rapidly formed when an external electric field is applied and break up into permanent linear fragments upon switching off the field. The resulting secondary chains are stabilized by attractive electrostatic and van der Waals interactions between the particles. We find that the length of the permanent chains is strongly dependent on the relative size (microsphere diameter D) of small and large particles and can be tuned by varying the particle size ratio s = Dsm/Dlg and particle number ratio r = Nsm/Nlg. Three latex microsphere systems of different particle size ratio, s = 0.9, 0.45, and 0.225, were characterized at different particle number ratios r by determining experimentally the length distribution of the permanent chains. The results are compared with statistical models based on a one-step or two-step process of forming the primary chains. We find that the one-step model is applicable to the system of similarly sized particles (s = 0.9) and the two-step chaining model is applicable to the system of dissimilarly sized particles (s = 0.225), where the large particles form chains first and the small ones serve as binders, which are later drawn in the junctions. Long permanent chains are formed only from particles of dissimilar size for which our model predicts a linear increase in the mean chain length with increasing r. On the basis of these results, we formulate a set of assembly rules for permanent colloidal chain formation by oppositely charged particles. The results make possible the precise large-scale formation of particle chains of any length, which can serve as components in new gels, biomaterials, and fluids with controlled rheology.

Comprehensive analysis of human cells motion under an irrotational AC electric field in an electro-microfluidic chip

AC electrokinetics is a versatile tool for contact-less manipulation or characterization of cells and has been widely used for separation based on genotype translation to electrical phenotypes. Cells responses to an AC electric field result in a complex combination of electrokinetic phenomena, mainly dielectrophoresis and electrohydrodynamic forces. Human cells behaviors to AC electrokinetics remain unclear over a large frequency spectrum as illustrated by the self-rotation effect observed recently. We here report and analyze human cells behaviors in different conditions of medium conductivity, electric field frequency and magnitude. We also observe the self-rotation of human cells, in the absence of a rotational electric field. Based on an analytical competitive model of electrokinetic forces, we propose an explanation of the cell self-rotation. These experimental results, coupled with our model, lead to the exploitation of the cell behaviors to measure the intrinsic dielectric properties of JURKAT, HEK and PC3 human cell lines.

Dielectrophoretic coassembly of binary colloidal mixtures in AC electric fields

We report the novel use of dielectrophoresis (DEP) for fabricating a new class of composite structures composed of binary mixtures of micrometer-sized colloidal particles. Latex-latex and latex-yeast cells have been coassembled in a combinatorial manner into one- (1D) and two-dimensional (2D) architectures in spatially varying external alternating current (AC) electric fields using two different electrode geometries. The effects of voltage, frequency, particle size, particle concentration, and particle type are investigated in detail to determine how the relative polarizabilities of the particles can be tuned to influence the overall coassembly process. Our observations reveal key differences in the latex-latex and latex-yeast cell assembly behavior especially in the case of 2D structure formation arising mainly due to the intrinsically high polarizability and polydispersity of the cells. This study is useful for making a potpourri of new hybrid structures with advanced functionalities for photonic and biosensing applications.

Influence of induced-charge electrokinetic phenomena on the dielectrophoretic assembly of gold nanoparticles in a conductive-island-based microelectrode system

Metal nanoparticles in a liquid suspension can be assembled dielectrophoretically (DEP) into nanoparticle chains, which can serve as electrical functional microwires connecting isolated and conductive elements to an electrode pair, as used in wet electronics, bioelectronics, and biochemical sensors. The frequency-dependent morphology of these nanoparticle chains assembled between an electrode pair has even been attributed to the decreasing magnitude of alternating current electroosmosis (ACEO) flow velocity with driving frequency. For instance, highly oriented nanoparticle nanowires can be generated by DEP assembly only at a high frequency, which induces a negligible small ACEO above the electrode surface, corresponding to fewer nanoparticles transported to the assembly region. In this study, attention is focused on the formation of nanoparticle chains in a conductive-island-based microelectrode system. It is worth noting that the intrusion of an island entity can bring about further double-layer polarization and induced charge electroosmosis flow (ICEO) around this conductive object, which exerts a significant influence on DEP assembly. In our experiments, the ends of nanoparticle chains are always extended onto the metal surfaces at 50 kHz, and their central parts become slender at 150 kHz. Meanwhile, wire-shaped particle clusters aligned along the direction of local field lines are more densely distributed at the island rims than that growing from the electrode edges. Consequently, a series of numerical modeling based on the theory of induced charge electrokinetic phenomena are introduced to account for these regular experimental results, including the double-layer charging effect at the metal/electrolyte interface, ACEO, ICEO, and electrothermal flow. Mutual DEP is also treated as an important factor affecting DEP behavior when neighboring particles are approaching one another. The results from the theoretical study are in good agreement with the experimental observations.

Engineering Cellular Photocomposite Materials Using Convective Assembly

Fabricating industrial-scale photoreactive composite materials containing living cells, requires a deposition strategy that unifies colloid science and cell biology. Convective assembly can rapidly deposit suspended particles, including whole cells and waterborne latex polymer particles into thin (<10 µm thick), organized films with engineered adhesion, composition, thickness, and particle packing. These highly ordered composites can stabilize the diverse functions of photosynthetic cells for use as biophotoabsorbers, as artificial leaves for hydrogen or oxygen evolution, carbon dioxide assimilation, and add self-cleaning capabilities for releasing or digesting surface contaminants. This paper reviews the non-biological convective assembly literature, with an emphasis on how the method can be modified to deposit living cells starting from a batch process to its current state as a continuous process capable of fabricating larger multi-layer biocomposite coatings from diverse particle suspensions. Further development of this method will help solve the challenges of engineering multi-layered cellular photocomposite materials with high reactivity, stability, and robustness by clarifying how process, substrate, and particle parameters affect coating microstructure. We also describe how these methods can be used to selectively immobilize photosynthetic cells to create biomimetic leaves and compare these biocomposite coatings to other cellular encapsulation systems.

Alternating current-dielectrophoresis driven on-chip collection and chaining of green microalgae in freshwaters

The capability of the AC dielectrophoresis (DEP) for on-chip capture and chaining of microalgae suspended in freshwaters was evaluated. The effects of freshwater composition as well as the electric field voltage, frequency, and duration, on the dielectrophoretic response of microalga Chlamydomonas reinhardtii were characterized systematically. Highest efficiency of cell alignment in one-dimensional arrays, determined by the percentage of cells in chain and the chain length, was obtained at AC-field of 20 V mm(-1) and 1 kHz applied for 600 s. The DEP response and cell alignment of C. reinhardtii in water sampled from lake, pond, and river, as well as model media were affected by the chemical composition of the media. In the model media, the efficiency of DEP chaining was negatively correlated to the conductivity of the cell suspensions, being higher in suspensions with low conductivity. The cells suspended in freshwaters, however, showed anomalously high chaining at long exposure times. High concentrations of nitrate and dissolved organic matter decrease cell chaining efficiency, while phosphate and citrate concentrations increase it and favor formation of longer chains. Importantly, the application of AC-field had no effect on algal autofluorescence, cell membrane damage, or oxidative stress damages in C. reinhardtii.

Transition between collective behaviors of micromotors in response to different stimuli

We report a Ag(3)PO(4) microparticle system showing collective behaviors in aqueous medium. Transition between two emergent patterns, namely "exclusion" and "schooling", can be triggered by shift in chemical equilibrium upon the addition or removal of NH(3) or in response to UV light. The transitions are consistent with a self-diffusiophoresis mechanism resulting from ion gradients. The reported system is among the few examples of nanomotors that are based on a reversible nonredox reaction and demonstrates new design principles for micro/nanomotors. Potential applications of the reported system in logic gates, microscale pumping, and hierarchical assembly have been demonstrated.

Co-assembly of oppositely charged particles into linear clusters and chains of controllable length

Colloidal particles with strongly attractive interactions snap on contact and form permanent, but disordered aggregates. In contrast, AC electric fields allow directional assembly of chains or crystals from repulsive particles by dielectrophoresis (DEP), but these structures fall apart once the field is switched off. We demonstrate how well-organized, permanent clusters and chains of micron-sized particles can be assembled by applying DEP to mixtures of oppositely charged microspheres. We found that the length of the formed chains depends on size ratio as well as the number ratio of the two species, and formulated a statistical model for this assembly mechanism, which is in excellent agreement with the experimental results. The assembly rules resulting from this study form a basis for tailoring new classes of permanent supracolloidal clusters and gels.

On-chip collection of particles and cells by AC electroosmotic pumping and dielectrophoresis using asymmetric microelectrodes

The recent development of microfluidic "lab on a chip" devices requiring sample sizes <100 μL has given rise to the need to concentrate dilute samples and trap analytes, especially for surface-based detection techniques. We demonstrate a particle collection device capable of concentrating micron-sized particles in a predetermined area by combining AC electroosmosis (ACEO) and dielectrophoresis (DEP). The planar asymmetric electrode pattern uses ACEO pumping to induce equal, quadrilateral flow directed towards a stagnant region in the center of the device. A number of system parameters affecting particle collection efficiency were investigated including electrode and gap width, chamber height, applied potential and frequency, and number of repeating electrode pairs and electrode geometry. The robustness of the on-chip collection design was evaluated against varying electrolyte concentrations, particle types, and particle sizes. These devices are amenable to integration with a variety of detection techniques such as optical evanescent waveguide sensing.

Cellular dielectrophoresis: applications to the characterization, manipulation, separation and patterning of cells

Over the past decade, dielectrophoresis (DEP) has evolved into a powerful, robust and flexible method for cellular characterization, manipulation, separation and cell patterning. It is a field with widely varying disciplines, as it is quite common to see DEP integrated with a host of applications including microfluidics, impedance spectroscopy, tissue engineering, real-time PCR, immunoassays, stem-cell characterization, gene transfection and electroporation, just to name a few. The field is finally at the point where analytical and numerical polarization models can be used to adequately describe and characterize the dielectrophoretic behavior of cells, and there is ever increasing evidence demonstrating that electric fields can safely be used to manipulate cells without harm. As such, DEP is slowly making its way into the biological sciences. Today, DEP is being used to manipulate individual cells to specific regions of space for single-cell assays. DEP is able to separate rare cells from a heterogeneous cell suspension, where isolated cells can then be characterized and dynamically studied using nothing more than electric fields. However, there is need for a critical report to integrate the many new features of DEP for cellular applications. Here, a review of the basic theory and current applications of DEP, specifically for cells, is presented.

Crossover from normal to anomalous diffusion in systems of field-aligned dipolar particles

Using molecular dynamics simulations we investigate the translational dynamics of particles with dipolar interactions in homogenous external fields. For a broad range of concentrations, we find that the anisotropic, yet normal diffusive behavior characterizing weakly coupled systems becomes anomalous both parallel and perpendicular to the field at sufficiently high dipolar coupling and field strength. After the ballistic regime, chain formation first yields cagelike motion in all directions, followed by transient, mixed diffusive-superdiffusive behavior resulting from cooperative motion of the chains. The enhanced dynamics disappears only at higher densities close to crystallization.