Amphiphilic dual brush block copolymers as "giant surfactants" and their aqueous self-assembly

Synthesis of Dendrimer-Like Molecules with Partial Carbon Chain via Iterative Single Unit Monomer Insertions

Carbon-chain dendritic polymers hold unique properties and promising applications. However, synthesizing carbon-chain dendrimers, beyond conjugated ones, remains a challenge. Here, the use of the iterative single unit monomer insertion technique for synthesizing 2.5 generation partial-carbon-chain dendrimers (G2.5) is described, utilizing bismaleimide as the core, a maleimide-trithiocarbonate conjugate as the branching unit, and indene as the spacer unit, following a divergent growth strategy. The optimized conditions for synthesizing the maleimide-trithiocarbonate branching unit are a bismaleimide to trithiocarbonate ratio of 5:1 and a reaction time of 30 min. The structures are verified using 1H nuclear magnetic resonance, gel permeation chromatography, and matrix-assisted laser desorption/ionization-time of flight mass spectra. A four-arm star polymer is then synthesized using the G2.5 as the core. This synthesis of a partial-carbon-chain dendrimer establishes a foundational step toward creating all-carbon-chain ones and may open new application avenues in material science.

Copolymer Reversible Addition-Fragmentation Chain Transfer Synthesis of Polyethylene Glycol (PEG) Functionalized with Hydrophobic Acrylates: A Study of Surface and Foam Properties

A series of amphiphilic statistical copolymers involving poly(ethylene glycol) monomethacrylate (PEGMA, -OH terminated, average Mn 200 molecular weight) and various hydrophobic acrylates were synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization. The gradient copolymers were characterized by gel-permeation chromatography (GPC), ¹H nuclear magnetic resonance (NMR), and attenuated total reflection Fourier transform infrared spectroscopy (FTIR-ATR). Solution properties of the copolymers were investigated utilizing surface tension measurement, dynamic light-scattering (DLS), as well as foam analysis using a dynamic foam analyzer (DFA). The PEG-functionalized copolymers showed a systematic trend depending on the hydrophobic moiety in properties including surface tension, critical micelle concentration (CMC), foam lifetime, and liquid drainage from the foam. Copolymers with alkyl-acrylates exhibited the best foam lifetime, demonstrating that the choice of hydrophobic moiety is crucial for foam stability. The PEG-functionalized materials described are considered promising additives for foam-stability purposes.

End-functionalized polymers by controlled/living radical polymerizations: synthesis and applications

This review focuses on end-functionalized polymers synthesized by controlled/living radical polymerizations and the applications in fields including bioconjugate formation, surface modification, topology construction, and self-assembly.

Palladium-Catalyzed Mizoroki-Heck and Copper-Free Sonogashira Coupling Reactions in Water Using Thermoresponsive Polymer Micelles

A few kinds of thermoresponsive diblock copolymers have been synthesized and utilized for palladium-catalyzed coupling reactions in water. Poly(N-isopropylacrylamide) (PNIPAAm) and poly(N,N-diethylacrylamide) (PDEAAm) are employed for thermoresponsive segments and poly(sodium 4-styrenesulfonate) (PSSNa) and poly(sodium 2-acrylamido-methylpropanesulfonate) (PAMPSNa) are employed for hydrophilic segments. Palladium-catalyzed Mizoroki-Heck reactions are performed in water and the efficiency of the extraction process is studied. More efficient extraction was observed for the PDEAAm copolymers when compared with the PNIPAAm copolymers and conventional surfactants. In the study of the Sonogashira coupling reactions in water, aggregative precipitation of the products was observed. Washing the precipitate with water gave the product with satisfactory purity with a good yield.

Organo-Cobalt Complexes in Reversible-Deactivation Radical Polymerization

Cobalt complexes have played an essential role in different chemical reactions. One of them that has attracted substantial attention in polymer science is cobalt mediated radical polymerization (CMRP), which is famous for its remarkable efficiency in controlling the radical polymerization of vinyl acetate (VAc) and other less active monomers (LAMs). Two pathways, reversible termination (RT) and degenerative transfer (DT), were recognized to control the polymerization in CMRP and could be further used to rationalize the mechanism of other RDRP methods. These control mechanisms were then found to be correlated to the redox potential of cobalt complexes and thus could be judged more quantitatively. The control of polymer composition and tacticity could also be achieved by using CMRP. The hybridization of CMRP and atom transfer radical polymerization (ATRP) could directly synthesize the vinyl acetate/methyl methacrylate and vinyl acetate/styrene block copolymers in one pot. The copolymer of acrylates and 1-octene could be obtained by visible-light-induced CMRP. With the addition of bulky Lewis acid, CMRP of N,N-dimethylacrylamide (DMA) showed high isotacticities with the contents of meso dyads (m) and meso triads (mm) up to 94 % and 87 %, respectively, and generated the crystalline PDMA with T_m as high as 276 °C. This personal account reviewed the development of CMRP with the mechanistic understanding, the control of composition and stereoselectivity of the polymeric products, and its perspective.

Amphiphilic Double-Brush Copolymers with a Polyurethane Backbone: A Bespoke Macromolecular Emulsifier for Ionic Liquid-in-Oil Emulsion

The study on ionic liquid (IL)-based emulsions is very interesting due to the "green" quality and potential wide applications of ILs, whereas the emulsifiers for the formation of IL-based emulsions are extremely limited and mainly centered on low molecular weight surfactants. In this work, synthesis of amphiphilic double-brush copolymers (DBCs) and their application as bespoke macromolecular emulsifiers for the formation of IL-containing non-aqueous emulsions are described. DBCs consisted of a polyurethane (PU) backbone and poly(N,N-dimethyl acrylamide) (PDMA) and poly(methyl methacrylate) (PMMA) chains that were grafted simultaneously at the same reactive site along the PU backbone (PU-g-PDMA/PMMA), which were synthesized through the combination of polyaddition and the reversible-deactivation radical polymerization reactions. Highly stable [Bmim][PF₆]-in-benzene emulsions could be gained by adopting PU-g-PDMA/PMMA DBCs as macromolecular emulsifiers at a low content, such as 0.025 wt %. On the basis of the stability and the size of emulsion droplets, PU-g-PDMA/PMMA DBCs exhibited much better emulsifying performances than their analogues, including PU-g-PDMA, PU-g-PMMA, and PDMA-b-PMMA copolymers. Such excellent emulsifying performances of PU-g-PDMA/PMMA DBCs were due to high interfacial activities. PU-g-PDMA/PMMA DBCs exhibited higher capabilities in lowering the interfacial tension of the [Bmim][PF₆]-benzene interface than their analogues. A large energy barrier to desorption of adsorbed PU-g-PDMA/PMMA DBCs from the interface contributed to high stability of the [Bmim][PF₆]-in-benzene emulsion.

Micellar Carriers Based on Amphiphilic PEG/PCL Graft Copolymers for Delivery of Active Substances

Amphiphilic copolymers of alkyne functionalized 2-hydroxyethyl methacrylate (AlHEMA) and poly(ethylene glycol) methyl ether methacrylate (MPEGMA) with graft or V-shaped graft topologies were synthesized. The functionalization of poly(ε-caprolactone) (PCL) with azide group enabled attachment to P(AlHEMA-co-MPEGMA) copolymers via a "click" alkyne-azide reaction. The introduction of PCL as a second side chain type in addition to PEG resulted in heterografted copolymers with modified properties such as biodegradability. "Click" reactions were carried out with efficiencies between 17-70% or 32-50% (for lower molecular weight PCL, 4000 g/mol, or higher molecular weight PCL, 9000 g/mol, respectively) depending on the PEG grafting density. The graft copolymers were self-assembled into micellar superstructures with the ability to encapsulate active substances, such as vitamin C (VitC), arbutin (ARB) or 4-n-butylresorcinol (4nBRE). Drug loading contents (DLC) were obtained in the range of 5-55% (VitC), 39-91% (ARB) and 42-98% (4nBRE). In vitro studies carried out in a phosphate buffer saline (PBS) solution (at pH 7.4 or 5.5) gave the maximum release levels of active substances after 10-240 min depending on the polymer system. Permeation tests in Franz chambers indicated that the bioactive substances after release by micellar systems penetrated through the artificial skin membrane in small amounts, and a majority of the bioactive substances remained inside the membrane, which is satisfactory for most cosmetic applications.

Angular-Independent Photonic Pigments via the Controlled Micellization of Amphiphilic Bottlebrush Block Copolymers

Photonic materials with angular-independent structural color are highly desirable because they offer the broad viewing angles required for application as colorants in paints, cosmetics, textiles, or displays. However, they are challenging to fabricate as they require isotropic nanoscale architectures with only short-range correlation. Here, porous microparticles with such a structure are produced in a single, scalable step from an amphiphilic bottlebrush block copolymer. This is achieved by exploiting a novel "controlled micellization" self-assembly mechanism within an emulsified toluene-in-water droplet. By restricting water permeation through the droplet interface, the size of the pores can be precisely addressed, resulting in structurally colored pigments. Furthermore, the reflected color can be tuned to reflect across the full visible spectrum using only a single polymer (M_n  = 290 kDa) by altering the initial emulsification conditions. Such "photonic pigments" have several key advantages over their crystalline analogues, as they provide isotropic structural coloration that suppresses iridescence and improves color purity without the need for either refractive index matching or the inclusion of a broadband absorber.

Amphiphilic multicomponent molecular brushes

Multicomponent molecular brushes containing amphiphilic polymer moieties are promising objects of research of macromolecular chemistry. The development of stimulus-responsive systems sensitive to changes in environmental parameters, based on the molecular brushes, opens up new possibilities for their applications in medicine, biochemistry and microelectronics. The review presents the current understanding of the structures of main types of amphiphilic multicomponent brushes, depending on the chemical nature and type of coupling of the backbone and side chains. The approaches to the controlled synthesis of multicomponent molecular brushes of different architecture are analyzed. Self-assembly processes of multicomponent molecular brushes in selective solvents are considered.

The bibliography includes 259 references.

Cooperation of Amphiphilicity and Smectic Order in Regulating the Self-Assembly of Cholesterol-Functionalized Brush-Like Block Copolymers

Nanoparticle morphology significantly affects the application of nanometer-scale materials. Understanding nanoparticle formation mechanisms and directing morphological control in nanoparticle self-assembly processes have received wide attention. Herein, a series of brush-like amphiphilic liquid crystalline block copolymers, PChEMA _m- b-POEGMA _n, containing cholesteryl mesogens with different hydrophobic/hydrophilic block ratios were designed and synthesized. The self-assembly behaviors of the resulting PChEMA _m- b-POEGMA _n block copolymers in different solvents (tetrahydrofuran/H₂O, 1,4-dioxane/H₂O, and N, N-dimethylformamide) were investigated in detail. Desirable micellar aggregates with well-organized architectures, including short cylindrical micelles, nanofibers, fringed platelets, and ellipsoidal vesicles with smectic micellar cores, were observed in 1,4-dioxane/H₂O with an increasing hydrophobic block ratio. Although both amphiphilicity and smectic order governed the self-assembly, these two factors were differently balanced in the different solvents. This unique supramolecular system provides a new strategy for the design of advanced functional nanomaterials with tunable morphologies.

Exploring the Long-Term Hydrolytic Behavior of Zwitterionic Polymethacrylates and Polymethacrylamides

The hydrolytic stability of polymers to be used for coatings in aqueous environments, for example, to confer anti-fouling properties, is crucial. However, long-term exposure studies on such polymers are virtually missing. In this context, we synthesized a set of nine polymers that are typically used for low-fouling coatings, comprising the well-established poly(oligoethylene glycol methylether methacrylate), poly(3-(N-2-methacryloylethyl-N,N-dimethyl) ammoniopropanesulfonate) ("sulfobetaine methacrylate"), and poly(3-(N-3-methacryamidopropyl-N,N-dimethyl)ammoniopropanesulfonate) ("sulfobetaine methacrylamide") as well as a series of hitherto rarely studied polysulfabetaines, which had been suggested to be particularly hydrolysis-stable. Hydrolysis resistance upon extended storage in aqueous solution is followed by ¹H NMR at ambient temperature in various pH regimes. Whereas the monomers suffered slow (in PBS) to very fast hydrolysis (in 1 M NaOH), the polymers, including the polymethacrylates, proved to be highly stable. No degradation of the carboxyl ester or amide was observed after one year in PBS, 1 M HCl, or in sodium carbonate buffer of pH 10. This demonstrates their basic suitability for anti-fouling applications. Poly(sulfobetaine methacrylamide) proved even to be stable for one year in 1 M NaOH without any signs of degradation. The stability is ascribed to a steric shielding effect. The hemisulfate group in the polysulfabetaines, however, was found to be partially labile.

Substrate-Independent Approach to Dense Cleavable Polymer Brushes by Nitroxide-Mediated Polymerization

High grafting density polymer brushes are grown on an inimer coating bearing nitroxide-mediated polymerization (NMP) inimers and glycidyl methacrylate (GMA). The inimer coating is cross-linked on the substrate to provide an initiator layer with needed stability during long exposure to organic solvents at moderate to high temperatures. Surface-initiated nitroxide-mediated polymerization (SI-NMP) is conducted to grow polystyrene (PS) brushes on the coating with a sacrificial layer designed to cleave the brushes. The cleaved brushes have larger molecular weights than the corresponding free polymers. The grafting density of the brushes is as high as 1.12 chains/nm² throughout the brush growth, which is among the densest PS brushes reported so far. Atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS) depth profiling are used to reveal the surface morphology and kinetics of the growth.

A versatile platform for precise synthesis of asymmetric molecular brush in one shot

Asymmetric molecular brushes emerge as a unique class of nanostructured polymers, while their versatile synthesis keeps a challenge for chemists. Here we show the synthesis of well-defined asymmetric molecular double-brushes comprising two different side chains linked to the same repeat unit along the backbone by one-pot concurrent atom transfer radical polymerization (ATRP) and Cu-catalyzed azide/alkyne cycloaddition (CuAAC) reaction. The double-brushes are based on a poly(Br-acrylate-alkyne) homopolymer possessing an alkynyl for CuAAC reaction and a 2-bromopropionate initiating group for ATRP in each repeat unit. The versatility of this one-shot approach is demonstrated by CuAAC reaction of alkynyl/poly(ethylene oxide)-N3 and ATRP of various monomers. We also show the quantitative conversion of pentafluorophenyl ester groups to amide groups in side chains, allowing for the further fabrication of diverse building blocks. This work provides a versatile platform for facile synthesis of Janus-type double-brushes with structural and functional control, in a minimum number of reactions.Producing well-defined polymer compositions and structures facilitates their use in many different applications. Here the authors show the synthesis of well-defined asymmetric double-brushes by a one-pot concurrent atom transfer radical polymerization and Cu-catalyzed Click reaction.

UV-responsive amphiphilic graft copolymers based on coumarin and polyoxazoline

A series of amphiphilic photo-responsive heterografted copolymers have been successfully synthesized. The random copolymers were composed of a methacrylate backbone, with various compositions of hydrophilic oligomeric 2-methyl-2-oxazoline side chains (OMOx) and hydrophobic long alkyl chains terminated by a coumarin moiety (Cm). Using dynamic (DLS) and static light scattering (SLS), and transmission electron microscopy (TEM), their self-assembling behavior was studied in water using the nanoprecipitation method. Depending on the system, one, two or three particle size distributions co-exist in solution. However, DLS measurements showed that monomodal and slightly polydisperse self-assemblies were obtained with the more hydrophobic copolymers (i.e., 85% of hydrophobic monomers with a long alkyl chain terminated by a coumarin moiety (MCm) per molecule) with hydrodynamic diameters ranging from ca. 130 to 300 nm. Morphological information on these self-assembly structures was obtained using SLS: a Gaussian behavior has thus been evidenced. Finally, these heterografted copolymers were illuminated using UV light at λ = 350 nm inducing photo-crosslinking of the coumarin units. The influence of UV illumination on the thus-formed nanoparticles was investigated by carrying out complementarily DLS-measurements and UV spectroscopy.

Opportunities for dual RDRP agents in synthesizing novel polymeric materials

Dual RDRP agents provide access to new polymeric materials by combining ATRP, NMP, and RAFT polymerization without end group transformations.

Construction of catechol-containing semi-fluorinated asymmetric polymer brush via successive RAFT polymerization and ATRP

This article reports the synthesis of a semi-fluorinated compositional heterogeneous polymer brush for anti-fouling surface.

Sonication-induced formation of size-controlled self-assemblies of amphiphilic Janus-type polymers as optical tumor-imaging agents

In this study, amphiphilic Janus-type polymers were synthesized via ring-opening metathesis polymerization (ROMP), multiple vicinal diol formation, and grafting of poly(ethylene glycol) monomethyl ether (mPEG). These amphiphilic polymers formed self-assemblies, which were a mixture of micelles and multimicellar aggregates, in water. By choosing suitable Janus-type polymers and irradiating an aqueous solution of polymers using a sonicator, either small micelles or large multimicellar aggregates were obtained selectively. Hydrophobic substituents controlled the aggregation-disaggregation behavior, leading to the formation of metastable self-assemblies by sonication. The formation of self-assemblies with a uniform size was affected by ultrasonic frequency, rather than power. In vivo optical tumor imaging revealed that the large-size multimicellar aggregates persisting for a long time in blood circulation slowly accumulated in tumor tissues. In contrast, the tumor site was rapidly, clearly visualized using the small-size micelles.

Janus nanoparticles: materials, preparation and recent advances in drug delivery

INTRODUCTION

The term Janus particles was used to describe particles that are the combination of two distinct sides with differences in chemical nature and/or polarity on each face. Due to the exponential growth of interest on multifunctional nanotechnologies, such anisotropic nanoparticles are promising tools in the field of drug delivery.

AREAS COVERED

The main preparation processes and the materials used have been described first. Then a specific focus has been done on therapeutic and/or diagnostic applications of Janus particles.

EXPERT OPINION

Janus particles are demonstrated as interesting objects with advanced properties that combine features and functionalities of different materials in one single unit. Due to their dual structure, Janus particles are promising candidates for a variety of high-quality applications dealing with drug delivery purposes. Still, the main challenges for the future lie in the development of the preparation of shape-controlled and nano-sized particles with large-scale production processes and approved pharmaceutical excipients.

New dialkoxyamine-trithiocarbonate for the synthesis of multiblock copolymers through in tandem RAFT/NMP

A new strategy for synthesizing multiblock copolymers comprising polystyrene, polyacrylates, poly(N-isopropylacrylamide), etc. is described.

Investigations in the Stranski-Laboratorium of the TU Berlin – Physical Chemistry of Colloidal Systems – Going Towards Complexity and Functionality

The research topics of our group are in general from the field of physical chemistry of colloidal systems. Within this rather wide layout a large variety of quite different questions and systems are tackled, where the common bridging factor is the aim of understanding the properties of colloidal systems based on their mesoscopic structure and dynamics, which in turn are controlled by their molecular composition. With such an enhanced understanding of the correlation between mesoscopic structure and the macroscopic properties the goal then is to employ this knowledge in order to formulate increasingly complex colloidal system with correspondingly more variable and interesting functionalities. From this general context of investigations, some representative systems and questions that have been studied in recent time by us are covered in this text.

They comprise the phase behaviour and the structures formed in solutions of surfactants and amphiphilic copolymers. Once these static properties are known, we also have a high interest in the dynamic properties and the kinetics of morphological transitions as they are observed under non-equilibrium conditions, since they are frequently encountered in applications. A key property of amphiphilic molecules is their ability to solubilise sparingly soluble compounds thereby forming microemulsions or nanoemulsions, where the ability to form such systems depends strongly on the molecular architecture of the amphiphiles. By turning to polymeric amphiphiles the concept of surfactants and their architecture can be extended largely towards more versatile structures, more complex self-assembly and much larger length and time scales. Another direction is the surfactant assisted formation of nanoparticles or mesoporous inorganic materials. By combining copolymers with other polymers, copolymers, colloids, or surfactants – for instance via electrostatically driven co-assembly – one may then form increasingly complex colloidal aggregates. By doing so one is able to control rheological properties or develop complex delivery systems, whose properties can be tailor-made by appropriate choice of the molecular build-up. This striving towards well controlled complexity achieved by means of self- and co-assembly then leads to increasingly more functional systems and is the key direction for future research activities in our group.

Thermoresponsive hydrogels from symmetrical triblock copolymers poly(styrene-block-(methoxy diethylene glycol acrylate)-block-styrene)

A series of symmetrical, thermo-responsive triblock copolymers was prepared by reversible addition-fragmentation chain transfer (RAFT) polymerization, and studied in aqueous solution with respect to their ability to form hydrogels. Triblock copolymers were composed of two identical, permanently hydrophobic outer blocks, made of low molar mass polystyrene, and of a hydrophilic inner block of variable length, consisting of poly(methoxy diethylene glycol acrylate) PMDEGA. The polymers exhibited a LCST-type phase transition in the range of 20-40 °C, which markedly depended on molar mass and concentration. Accordingly, the triblock copolymers behaved as amphiphiles at low temperatures, but became water-insoluble at high temperatures. The temperature dependent self-assembly of the amphiphilic block copolymers in aqueous solution was studied by turbidimetry and rheology at concentrations up to 30 wt %, to elucidate the impact of the inner thermoresponsive block on the gel properties. Additionally, small-angle X-ray scattering (SAXS) was performed to access the structural changes in the gel with temperature. For all polymers a gel phase was obtained at low temperatures, which underwent a gel-sol transition at intermediate temperatures, well below the cloud point where phase separation occurred. With increasing length of the PMDEGA inner block, the gel-sol transition shifts to markedly lower concentrations, as well as to higher transition temperatures. For the longest PMDEGA block studied (DP(n) about 450), gels had already formed at 3.5 wt % at low temperatures. The gel-sol transition of the hydrogels and the LCST-type phase transition of the hydrophilic inner block were found to be independent of each other.