Novel type of bicellar disks from a mixture of DMPC and DMPE-DTPA with complexed lanthanides

Mn(II)-Based Lipidic Nanovesicles as High-Efficiency MRI Probes

Although nowadays there is a renewed and growing interest in Mn-based contrast agents, there are only few studies dealing with Mn-based lipophilic nanoparticles and how they may be optimized as MRI contrast agents. Three amphiphilic paramagnetic Mn(II) complexes based on derivatives of EDTA and 1,4-DO2A were used for the preparation of lipidic nanoparticles. The length and position of the aliphatic chains were found to control whether either vesicular liposomes, nonvesicular bicelles, or a mixture of both was produced as well as the size and morphology of phospholipid-based self-assembling nanoaggregates. These differences determine whether hydrophilic Gd-based contrast agents or fluorescent dyes can be entrapped in the aqueous core of the nanoaggregate. Structural characterization was performed by cryo-TEM. Detailed ¹H NMR relaxometric analyses were carried out on all systems. The effect of entrapping gadoteridol in the aqueous core (where present) was studied by preparing diamagnetic amphiphilic Zn(II) analogues. In the case of homogeneous systems, the data were also fitted to obtain the relaxometric parameters for comparison with literature data. The results of these studies demonstrate enhanced relaxivity of the nanoaggregates with respect to monomeric analogues. This work allowed us to understand how to control the formation of different types of nanovesicles (liposomes, bicelles, and micelles), optimize their MRI contrast, and provide different in vivo biodistribution characteristics.

Kinetically Stable Bicelles with Dilution Tolerance, Size Tunability, and Thermoresponsiveness for Drug Delivery Applications

Mixtures of a phospholipid (1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine, DPPC) and a sodium-cholate-derived surfactant (SC-C₅ ) at room temperature formed phospholipid bilayer fragments that were edge-stabilized by SC-C₅ : so-called "bicelles". Because the bilayer melting point of DPPC (41 °C) is above room temperature and because SC-C₅ has an exceptionally low critical micelle concentration (<0.5 mm), the bicelles are kinetically frozen at room temperature. Consequently, they exist even when the mixture is diluted to a concentration of 0.04 wt %. In addition, the lateral size of the bicelles can be fine-tuned by altering the molar ratio of DPPC to SC-C₅ . On heating to ≈37 °C, the bicelles transformed into micelles composed of DPPC and SC-C₅ . By taking advantage of the dilution tolerance, size tunability, and thermoresponsiveness, we demonstrated in vitro drug delivery based on use of the bicelles as carriers, which suggests their potential utility in transdermal drug delivery.

Molecular engineering of lanthanide ion chelating phospholipids generating assemblies with a switched magnetic susceptibility

Lanthanide ion (Ln³⁺) chelating amphiphiles are powerful molecules for tailoring the magnetic response of polymolecular assemblies. Mixtures of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 1,2-dimyristoyl-sn-glycero-3-phospho-ethanolamine-diethylene triaminepentaacetate (DMPE-DTPA) complexed to Ln³⁺ deliver highly magnetically responsive bicelles. Their magnetic properties are readily tuned by changing the bicellar size or the magnetic susceptibility Δχ of the bilayer lipids. The former technique is intrinsically bound to the region of the phase diagram guarantying the formation of bicelles. Methods aiming towards manipulating the Δχ of the bilayer are comparatively more robust, flexible and lacking. Herein, we synthesized a new Ln³⁺ chelating phospholipid using glutamic acid as a backbone: DMPE-Glu-DTPA. The chelate polyhedron was specifically engineered to alter the Δχ, whilst remaining geometrically similar to DMPE-DTPA. Planar asymmetric assemblies hundreds of nanometers in size were achieved presenting unprecedented magnetic alignments. The DMPE-Glu-DTPA/Ln³⁺ complex switched the Δχ, achieving perpendicular alignment of assemblies containing Dy³⁺ and parallel alignment of those containing Tm³⁺. Moreover, samples with chelated Yb³⁺ were more alignable than the Tm³⁺ chelating counterparts. Such a possibility has never been demonstrated for planar Ln³⁺ chelating polymolecular assemblies. The physico-chemical properties of these novel assemblies were further studied by monitoring the alignment behavior at different temperatures and by including 16 mol% of cholesterol (Chol-OH) in the phospholipid bilayer. The DMPE-Glu-DTPA/Ln³⁺ complex and the resulting assemblies are promising candidates for applications in numerous fields including pharmaceutical technologies, structural characterization of membrane biomolecules by NMR spectroscopy, as contrasting agents for magnetic resonance imaging, and for the development of smart optical gels.

Mastering the magnetic susceptibility of magnetically responsive bicelles with 3β-amino-5-cholestene and complexed lanthanide ions

The magnetic susceptibility of lanthanide-chelating bicelles was selectively enhanced by introducing 3β-amino-5-cholestene (aminocholesterol, Chol-NH₂) in the bilayer. Unprecedented magnetic alignment of the bicelles was achieved without altering their size. An aminocholesterol conjugate (Chol-C₂OC₂-NH₂), in combination with different lanthanide ions, offers the possibility of fine-tuning the bicelle's magnetic susceptibility.

Facile and Rapid Formation of Giant Vesicles from Glass Beads

Giant vesicles (GVs) are widely-used model systems for biological membranes. The formulation of these vesicles, however, can be problematic and artifacts, such as degraded molecules or left-over oil, may be present in the final liposomes. The rapid formulation of a high number of artifact-free vesicles of uniform size using standard laboratory equipment is, therefore, highly desirable. Here, the gentle hydration method of glass bead-supported thin lipid films has been enhanced by adding a vortexing step. This led to the formulation of a uniform population of giant vesicles. Batches of glass beads coated with different lipids can be combined to produce vesicles of hybrid lipid compositions. This method represents a stable approach to rapidly generate giant vesicles.

Fabrication Procedures and Birefringence Measurements for Designing Magnetically Responsive Lanthanide Ion Chelating Phospholipid Assemblies

Bicelles are tunable disk-like polymolecular assemblies formed from a large variety of lipid mixtures. Applications range from membrane protein structural studies by nuclear magnetic resonance (NMR) to nanotechnological developments including the formation of optically active and magnetically switchable gels. Such technologies require high control of the assembly size, magnetic response and thermal resistance. Mixtures of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and its lanthanide ion (Ln³⁺) chelating phospholipid conjugate, 1,2-dimyristoyl-sn-glycero-3-phospho-ethanolamine-diethylene triaminepentaacetate (DMPE-DTPA), assemble into highly magnetically responsive assemblies such as DMPC/DMPE-DTPA/Ln³⁺ (molar ratio 4:1:1) bicelles. Introduction of cholesterol (Chol-OH) and steroid derivatives in the bilayer results in another set of assemblies offering unique physico-chemical properties. For a given lipid composition, the magnetic alignability is proportional to the bicelle size. The complexation of Ln³⁺ results in unprecedented magnetic responses in terms of both magnitude and alignment direction. The thermo-reversible collapse of the disk-like structures into vesicles upon heating allows tailoring of the assemblies' dimensions by extrusion through membrane filters with defined pore sizes. The magnetically alignable bicelles are regenerated by cooling to 5 °C, resulting in assembly dimensions defined by the vesicle precursors. Herein, this fabrication procedure is explained and the magnetic alignability of the assemblies is quantified by birefringence measurements under a 5.5 T magnetic field. The birefringence signal, originating from the phospholipid bilayer, further enables monitoring of polymolecular changes occurring in the bilayer. This simple technique is complementary to NMR experiments that are commonly employed to characterize bicelles.

Spontaneous Lipid Nanodisc Fomation by Amphiphilic Polymethacrylate Copolymers

There is a growing interest in the use of lipid bilayer nanodiscs for various biochemical and biomedical applications. Among the different types of nanodiscs, the unique features of synthetic polymer-based nanodiscs have attracted additional interest. A styrene-maleic acid (SMA) copolymer demonstrated to form lipid nanodiscs has been used for structural biology related studies on membrane proteins. However, the application of SMA polymer based lipid nanodiscs is limited because of the strong absorption of the aromatic group interfering with various experimental measurements. Thus, there is considerable interest in the development of other molecular frameworks for the formation of polymer-based lipid nanodiscs. In this study, we report the first synthesis and characterization of a library of polymethacrylate random copolymers as alternatives to SMA polymer. In addition, we experimentally demonstrate the ability of these polymers to form lipid bilayer nanodiscs through the fragmentation of lipid vesicles by means of light scattering, electron microscopy, differential scanning calorimetry, and solution and solid-state NMR experiments. We further demonstrate a unique application of the newly developed polymer for kinetics and structural characterization of the aggregation of human islet amyloid polypeptide (also known as amylin) within the lipid bilayer of the polymer nanodiscs using thioflavin-T-based fluorescence and circular dichroism experiments. Our results demonstrate that the reported new styrene-free polymers can be used in high-throughput biophysical experiments. Therefore, we expect that the new polymer nanodiscs will be valuable in the structural studies of amyloid proteins and membrane proteins by various biophysical techniques.

Understanding the Enhanced Magnetic Response of Aminocholesterol Doped Lanthanide-Ion-Chelating Phospholipid Bicelles

Cholesterol (Chol-OH) and its conjugates are powerful molecules for engineering the physicochemical and magnetic properties of phospholipid bilayers in bicelles. Introduction of aminocholesterol (3β-amino-5-cholestene, Chol-NH₂) in bicelles composed of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and the thulium-ion-chelating phospholipid 1,2-dimyristoyl-sn-glycero-3-phospho-ethanolamine-diethylene triaminepentaacetate (DMPE-DTPA/Tm³⁺) results in unprecedented high magnetic alignments by selectively tuning the magnetic susceptibility Δχ of the bilayer. However, little is known on the underlying mechanisms behind the magnetic response and, more generally, on the physicochemical forces governing a Chol-NH₂ doped DMPC bilayer. We tackled this shortcoming with a multiscale bottom-up comparative investigation of Chol-OH and Chol-NH₂ mixed with DMPC. First, simplified monolayer models on a Langmuir trough were employed to compare the two steroid molecules at various contents in DMPC. In a second step, a molecular dynamics (MD) simulation allowed for a more representative model of the bicelle bilayer while monitoring the amphiphiles and their interactions on the molecular level. In a final step, we moved away from the models and investigated the effect of temperature on the structure and magnetic alignment of Chol-NH₂ doped bicelles by SANS. The DMPC/steroid monolayer studies showed that Chol-OH induces a larger condensation effect than Chol-NH₂ at steroid contents of 16 and 20 mol %. However, this tendency was inversed at steroid contents of 10, 30, and 40 mol %. Although the MD simulation with 16 mol % steroid revealed that both compounds induce a liquid-ordered state in DMPC, the bilayer containing Chol-NH₂ was much less ordered than the analogous system containing Chol-OH. Chol-NH₂ underwent significantly more hydrogen bonding interactions with neighboring DMPC lipids than Chol-OH. It seems that, by altering the dynamics of the hydrophilic environment of the bicelle, Chol-NH₂ changes the crystal field and angle of the phospholipid-lanthanide DMPE-DTPA/Tm³⁺ complex. These parameters largely determine the magnetic susceptibility Δχ of the complex, explaining the SANS results, which show significant differences in magnetic alignment of the steroid doped bicelles. Highly magnetically alignable DMPC/Chol-NH₂/DMPE-DTPA/Tm³⁺ (molar ratio 16:4:5:5) bicelles were achieved up to temperatures of 35 °C before a thermoreversible rearrangement into nonalignable vesicles occurred. The results confirm the potential of Chol-NH₂ doped bicelles to act as building blocks for the development of the magnetically responsive soft materials of tomorrow.

Methods for Generating Highly Magnetically Responsive Lanthanide-Chelating Phospholipid Polymolecular Assemblies

Mixtures of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and its lanthanide ion (Ln³⁺) chelating phospholipid conjugate, 1,2-dimyristoyl-sn-glycero-3-phospho-ethanolamine-diethylene triaminepentaacetate (DMPE-DTPA), assemble into highly magnetically responsive polymolecular assemblies such as DMPC/DMPE-DTPA/Ln³⁺ (molar ratio 4:1:1) bicelles. Their geometry and magnetic alignability is enhanced by introducing cholesterol into the bilayer in DMPC/Cholesterol/DMPE-DTPA/Ln³⁺ (molar ratio 16:4:5:5). However, the reported fabrication procedures remain tedious and limit the generation of highly magnetically alignable species. Herein, a simplified procedure where freeze thawing cycles and extrusion are replaced by gentle heating and cooling cycles for the hydration of the dry lipid film was developed. Heating above the phase transition temperature T_m of the lipids composing the bilayer before cooling back below the T_m was essential to guarantee successful formation of the polymolecular assemblies composed of DMPC/DMPE-DTPA/Ln³⁺ (molar ratio 4:1:1). Planar polymolecular assemblies in the size range of hundreds of nanometers are achieved and deliver unprecedented gains in magnetic response. The proposed heating and cooling procedure further allowed to regenerate the highly magnetically alignable DMPC/Cholesterol/DMPE-DTPA/Ln³⁺ (molar ratio 16:4:5:5) species after storage for one month frozen at -18 °C. The simplicity and viability of the proposed fabrication procedure offers a new set of highly magnetically responsive lanthanide ion chelating phospholipid polymolecular assemblies as building blocks for the smart soft materials of tomorrow.

Tailoring Bicelle Morphology and Thermal Stability with Lanthanide-Chelating Cholesterol Conjugates

Bicelles composed of DMPC and phospholipids capable of chelating lanthanide ions, such as 1,2-dimyristoyl-sn-glycero-3-phospho-ethanolamine-diethylene triaminepentaacetate (DMPE-DTPA), are highly tunable magnetically responsive soft materials. Further doping of these systems with cholesterol-DTPA conjugates complexed to a lanthanide ion considerably enhances the bicelle's size and magnetic alignability. The high value of these cholesterol conjugates for bicelle design remains largely unexplored. Herein, we examine how molecular structural alterations within the cholesterol-DTPA conjugates lead to contrasting self-assembled polymolecular aggregate structures when incorporated into DMPC/DMPE-DTPA/Tm(3+) bilayers. The nature of the linker connecting the DTPA-chelating moiety to the sterol backbone is examined by synthesizing conjugates of various linker lengths and polarities. The incorporation of these compounds within the bilayer results in polymolecular aggregate geometries of higher curvature. The increasing degrees of freedom for conformational changes conveyed to the chelator headgroup with increasing linker atomic length reduce the cholesterol-DTPA conjugate's critical packing parameter. Consequently, an inverse correlation between the number of carbon atoms in the linker and the bicelle radius is established. The introduction of polarity into the carbon chain of the linker did not cause major changes in the polymolecular aggregate architecture. Under specific conditions, the additives permit the formation of remarkably temperature-resistant bicelles. The versatility of design offered by these amphiphiles gives rise to new and viable tools for the growing field of magnetically responsive soft materials.

Continuous Paranematic Ordering of Rigid and Semiflexible Amyloid-Fe3O4 Hybrid Fibrils in an External Magnetic Field

External magnetic field is a powerful approach to induce orientational order in originally disordered suspensions of magneto-responsive anisotropic particles. By small angle neutron scattering and optical birefringence measurement technology, we investigated the effect of magnetic field on the spatial ordering of hybrid amyloid fibrils with different aspect ratios (length-to-diameter) and flexibilities decorated by spherical Fe3O4 nanoparticles. A continuous paranematic ordering from an initially isotropic suspension was observed upon increasing magnetic field strength, with spatial orientation increasing with colloidal volume fraction. At constant dimensionless concentration, stiff hybrid fibrils with varying aspect ratios and volume fractions, fall on the same master curve, with equivalent degrees of ordering at identical magnetic fields. However, the semiflexible hybrid fibrils with contour length close to persistence length exhibit a lower degree of alignment. This is consistent with Khokhlov-Semenov theoretical predictions. These findings sharpen the experimental toolbox to design colloidal systems with controllable degree of orientational ordering.

Magnetically enhanced bicelles delivering switchable anisotropy in optical gels

Mesostructures responding to external triggers such as temperature, pH, or magnetic field have the potential to be used as self-acting sensors, detectors, or switches. Key features are a strong and well-defined response to the external trigger. Here, we present magnetic alignable bicelles embedded into a gelatin matrix generating magnetically switchable structures, which can reversibly be locked and unlocked by adjusting the temperature. We show that the disk-like aggregates can be orientated in magnetic fields, and such orientation can be preserved after embedding into gelatin. The resulting gel cubes show an anisotropic transfer for electromagnetic waves, i.e., a different spatial birefringence. Cycling through the melting point of gelatin sets the structure back to its isotropic state providing a read-out of the thermal history. Stacking of the bicelles induced by the gelatin promotes magnetic aligning, as an increased aggregation number in the stacks increases the magnetic orientation energy.

Cholesterol-diethylenetriaminepentaacetate complexed with thulium ions integrated into bicelles to increase their magnetic alignability

Lanthanides have been used for several decades to increase the magnetic alignability of bicelles. DMPE-DTPA (1,2-dimyristoyl-sn-glycero-3-phospho-ethanolamine-diethylenetriaminepentaacetate) is commonly applied to anchor the lanthanides into the bicelles. However, because DMPE-DTPA has the tendency to accumulate at the highly curved edge region of the bicelles and if located there does not contribute to the magnetic orientation energy, we have tested cholesterol-DTPA complexed with thulium ions (Tm(3+)) as an alternative chelator to increase the magnetic alignability. Differential scanning calorimetric (DSC) measurements indicate the successful integration of cholesterol-DTPA into a DMPC (1,2-dimyristoyl-sn-glycero-3-phosphocholine) bilayer. Cryo transmission electron microscopy and small-angle neutron scattering (SANS) measurements show that the disklike structure, that is, bicelles, is maintained if cholesterol-DTPA·Tm(3+) is integrated into a mixture of DMPC, cholesterol, and DMPE-DTPA·Tm(3+). The size of the bicelles is increased compared to the size of the bicelles obtained from mixtures without cholesterol-DTPA·Tm(3+). Magnetic-field-induced birefringence and SANS measurements in a magnetic field show that with addition of cholesterol-DTPA·Tm(3+) the magnetic alignability of these bicelles is significantly increased compared to bicelles composed of DMPC, cholesterol, and DMPE-DTPA·Tm(3+) only.

Alignment of bicelles studied with high-field magnetic birefringence and small-angle neutron scattering measurements

Birefringence measurements at high magnetic field strength of up to 33 T were used to detect magnetically induced alignment of bicelles composed of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC), cholesterol, and 1,2-dimyristoyl-sn-glycero-3-phosphoethanolamine-diethylenetriaminepentaacetate (DMPE-DTPA) with complexed lanthanide ions. These birefringence measurements together with a small-angle neutron scattering (SANS) analysis in a magnetic field showed parallel alignment of the bicelles if the lanthanide was thulium (Tm(3+)), and perpendicular alignment with dysprosium (Dy(3+)). With the birefringence measurements, the order parameter S can be determined as a function of the magnetic field strength, if the magnetic alignment reaches saturation. Additional structural information can be obtained if the maximum induced birefringence is considered. The degree of alignment of the studied bicelles increased with decreasing temperature from 40 to 5 °C and showed a new bicellar structure comprising a transient hole formation at intermediate temperatures (20 °C) during heating from 5 to 40 °C.

Permission to enter cell by shape: nanodisk vs nanosphere

Changing polystyrene nanoparticles from three-dimensional spherical shape to two-dimensional disk shape promotes their cell surface binding with significant reduction of cell uptake. As a result of lower cell uptake, nanodisks show very little perturbations on cell functions such as cellular ROS generation, apoptosis and cell cycle progression compared to nanospheres. Therefore, disk-shaped nanoparticles may be a promising template for developing cell membrane-specific and safer imaging agents for a range of biomedical applications such as molecular imaging, tissue engineering, cell tracking, and stem cell separation.

Cholesterol increases the magnetic aligning of bicellar disks from an aqueous mixture of DMPC and DMPE-DTPA with complexed thulium ions

Aqueous mixtures of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC), 1,2-dimyristoyl-sn-glycero-3-phosphoethanolamine-diethylenetriamine pentaacetate (DMPE-DTPA) with complexed thulium ions (Tm(3+)), and cholesterol with varying molar ratio were studied at different temperatures in the presence and absence of a magnetic field. For mixtures without cholesterol weakly magnetically alignable small disks, so-called bicelles, are formed at temperatures below the phase transition temperature (5-22 °C), as shown by cryo-transmission electron microscopy (cryo-TEM) and small-angle neutron scattering (SANS). In presence of 16 mol % cholesterol the disk size and the magnetic alignability were larger within the entire temperature range studied (5-40 °C). Cholesterol acts as a spacer between DMPE-DTPA with complexed Tm(3+), allowing these molecules to integrate more frequently into the planar part of the bicelles. Replacing DMPC partially by cholesterol thus lead to an increase in magnetic aligning by a higher amount of the magnetic handles (Tm(3+) complexed to DMPE-DTPA) in the plane and by an increased number of phospholipids in the enlarged bicelles. The magnetic aligning was most pronounced at 5 °C. The temperature-dependent structural changes of the DMPC/cholesterol/DMPE-DTPA/Tm(3+) aqueous mixtures are complex, including the transient appearance of holes in the disks at intermediate temperatures.

Engineering cell surfaces via liposome fusion

In this study, we have rewired cell surfaces with ketone and oxyamine molecules based on liposome fusion for applications in cell-surface engineering. Lipid vesicles, functionalized with ketone and oxyamine molecules, display complementary chemistry and undergo recognition, docking, and subsequent fusion upon covalent oxime bond formation. Liposome fusion was characterized by several techniques including matrix-assisted laser-desorption/ionization mass spectrometry (MALDI-MS), light scattering, fluorescence resonance energy transfer (FRET), and transmission electron microscopy (TEM). When cultured with cells, ketone- and oxyamine-containing liposomes undergo spontaneous membrane fusion to present the respective molecules from cell surfaces. Ketone-functionalized cell surfaces serve as sites for chemoselective ligation with oxyamine-conjugated molecules. We tailored and fluorescently labeled cell surfaces with an oxyamine-conjugated rhodamine dye. As an application of this cell-surface engineering strategy, ketone- and oxyamine-functionalized cells were patterned on oxyamine- and ketone-presenting surfaces, respectively. Cells adhered, spread, and proliferated in the patterned regions via interfacial oxime linkage. The number of ketone molecules on the cell surface was also quantified by flow cytometry.