Influence of the stabilizer concentration on the internal liquid crystalline order and the size of oil-loaded monolinolein-based dispersions

Innovative use of lipid mesophase dispersions for bisphenol A sequestration in water

HYPOTHESIS

Mesophase dispersions are promising colloids for removing micropollutants from water. We hypothesized that the complex internal nanostructure and tunable lipid/water interface amounts play a crucial role in absorbed quantities. Modifications in interfacial organization within the particles while trapping the micropollutant is assumed.

EXPERIMENTS

We formulated stable monolinolein-based dispersions with four types of mesophases (bicontinuous and micellar cubic, hexagonal, and fluid isotropic L2) by varying dodecane contents. The absorption of bisphenol A by these dispersions from water was monitored using molecular spectroscopy. At equilibrium, absorbed quantities by mesophase dispersions were compared to unstructured dodecane/water miniemulsions for two bisphenol concentrations. Structural changes during bisphenol incorporation were identified using small-angle X-ray scattering.

FINDINGS

Lipid mesophase particles of submicron size showed greater bisphenol incorporation than dodecane/water miniemulsions, with cubosomes being most effective ones, absorbing twice as much as unstructured emulsions. Higher absorption levels are observed for more complex nanostructures with increased lipid/dodecane ratios. The incorporation of bisphenol affected the curvature of internal interfaces, potentially causing phase transitions and indicating that bisphenol settles at interfaces. Similar absorption levels in identical mesophases suggest a strong correlation between nano-structure and absorbed quantities.

Inverse ISAsomes in Bio-Compatible Oils—Exploring Formulations in Squalane, Triolein and Olive Oil

In contrast to their more common counterparts in aqueous solutions, inverse ISAsomes (internally self-assembled somes/particles) are formulated as kinetically stabilised dispersions of hydrophilic, lyotropic liquid-crystalline (LC) phases in non-polar oils. This contribution reports on their formation in bio-compatible oils. We found that it is possible to create inverse hexosomes, inverse micellar cubosomes (Fd3m) and an inverse emulsified microemulsion (EME) in excess squalane with a polyethylene glycol alkyl ether as the primary surfactant forming the LC phase and to stabilise them with hydrophobised silica nanoparticles. Furthermore, an emulsified -phase and inverse hexosomes were formed in excess triolein with the triblock-copolymer Pluronic® P94 as the primary surfactant. Stabilisation was achieved with a molecular stabiliser of type polyethylene glycol (PEG)-dipolyhydroxystearate. For the inverse hexosomes in triolein, the possibility of a formulation without any additional stabiliser was explored. It was found that a sufficiently strong stabilisation effect was created by the primary surfactant alone. Finally, triolein was replaced with olive oil which also led to the successful formation of inverse hexosomes. As far as we know, there exists no previous contribution about inverse ISAsomes in complex oils such as triolein or plant oils, and the existence of stabiliser-free (i.e., self-stabilising) inverse hexosomes has also not been reported until now.

Electroformation of Particulate Emulsions Using Lamellar and Nonlamellar Lipid Self-Assemblies

We report on the development of an electroformation technique for the preparation of particulate (particle-based) emulsions. These oil-in-water (here, lipid phase acts as an "oil") emulsions were prepared using nonlamellar lipid phases. Such emulsion particles offer high hydrophobic volumes compared to conventional lipid particles based on lamellar phases (vesicles/liposomes). In addition, the tortuous internal nanostructure contributes through greater surface area per volume of lipid particles allowing an enhanced loading of payloads. The electroformation method makes use of a capacitor formed from two indium tin oxide coated conductive glass surfaces separated by a dielectric aqueous medium. This capacitor setup is enclosed in a custom-designed 3D-printed unit. Lipid molecules, deposited on conductive surfaces, self-assemble into a nanostructure in the presence of an aqueous medium, which when subjected to an alternating current electric field forms nano- and/or microparticles. Optical microscopy, dynamic light scattering, and small-angle X-ray scattering techniques were employed for micro- and nanostructural analyses of electroformed particles. With this method, it is possible to produce particulate emulsions at a very low (e.g., 0.0005 wt % or 0.5 mg/mL) lipid concentration. We demonstrate an applicability of the electroformation method for drug delivery by preparing lipid particles with curcumin, which is a highly important but water-insoluble medicinal compound. As the method employs gentle conditions, it is potentially noninvasive for the delivery of delicate biomolecules and certain drugs, which are prone to decomposition or denaturation due to the high thermomechanical energy input and/or nonaqueous solvents required for existing methods.

Aqueous Lyotropic Mesophase Behavior of Gemini Dicarboxylate Surfactants Swollen with n-Decane

We report detailed small-angle X-ray scattering (SAXS) studies of the impact of variable n-decane loadings on the lyotropic liquid crystalline (LLC) phase behaviors of homologous bis(tetramethylammonium) gemini didecanoate surfactants TMA-7x, which derive from dimerizing decanoic acid through its α-carbon with hydrocarbyl linkers -(CH₂)_x- where x = 3, 4, 5, and 6. TMA-7x amphiphiles with x = 3 or 5 exhibit a strong propensity to form normal double gyroid (G) LLC network mesophases over wide surfactant hydration ranges, as compared to homologues with x = 4 or 6. On swelling aqueous TMA-7x LLC mesophases with up to 35 wt % n-decane, we demonstrate that odd-carbon linked surfactants (x = 3 or 5) form G and normal double diamond (D) phases over wide water concentration windows with T = 22-100 °C. Complementary studies of decane-swollen TMA-7x (x = 4 or 6) aqueous LLCs instead demonstrate significantly diminished network phase stability, in favor of hexagonally-packed cylinder phases and a zoo of complex quasispherical micelle packings, which include micellar C14 and C15 Laves phases (P6₃/mmc and Fd3(-)m symmetries, respectively) and high-symmetry hexagonally close packed (HCP) and body-centered cubic (BCC) arrangements. These rich phase behaviors are rationalized in terms of linker length parity-dependent surfactant conformations and the delicate free energy balance that guides the packing of these geometrically anisotropic amphiphiles by minimizing unfavorable water-hydrophobic contacts, maximizing ionic surfactant-headgroup counterion solvation with minimal local variations, and maximizing electrostatic cohesion within these supramolecular assemblies.

Influence of γ-Lactones on Monolinolein/Water Bulk and Emulsified Mesophases

The emulsification of two flavor compounds of the γ-lactone type with monolinolein liquid crystalline submicron particles is reported. The stabilization is ensured by the copolymer F127. γ-Nonalactone can be loaded in bicontinuous cubic monolinolein particles at a larger level (up to 20 wt %) than γ-decalactone (less than 15 wt %). The phase behavior of the ternary monolinolein/water/γ-nonalactone system was studied. The large γ-nonalactone content solubilized into cubosomes was corroborated by the observation of a wide cubic V₂ range in the ternary phase diagram. Surprisingly, no inverted hexagonal phase was found in the system. On the contrary, the incorporation of γ-decalactone in the lipid particles gave rise to a dispersion of inverted hexagonal phase, which corresponds to a classical behavior of an oily additive. We finally determined the internal phase of particles including 10 wt % of γ-nonalactone upon increasing the F127 content. We thus found that γ-nonalactone restricts very significantly the interaction of the emulsifier with the cubosomes' interior.

Reverse Hexosome Dispersions in Alkanes-The Challenge of Inverting Structures

Monoglycerides form lipophilic liquid-crystalline (LC) phases when mixed with water. The corresponding LC nanostructures coexist with excess water, which is a necessary condition for the formation of internally nanostructured dispersed particles. These nanostructures comprise bicontinuous cubic phases, inverted hexagonal phases, and inverted micellar cubic phases. The dispersed particles are therefore named cubosomes, hexosomes, or micellar cubosomes. Such dispersions are usually stabilized by hydrophilic high-molecular-weight triblock (TB) copolymers. Another way to stabilize such dispersions is by forming the so-called Pickering or Ramsden emulsions using nanoparticles as stabilizers. In this contribution, we explore the possibility of forming and stabilizing inverted or reverse systems, that is, dispersions of hydrophilic LC phases in an excess oil phase like tetradecane. Our aim was to change from oil-in-water emulsions to water-in-oil emulsions, where the water phase is a LC phase in equilibrium with excess oil and where the oil is nonpolar, for example, an alkane. This work consists of three parts: (1) to find a hexagonal hydrophilic LC phase that can not only incorporate a certain amount of tetradecane but can also coexist with excess tetradecane in the case of higher oil concentration, (2) to find a suitable stabilizer-either polymeric or nanoparticle type-that can stabilize the emulsion without destroying the hexagonal LC phase, and finally (3) to check the stability of this reverse hexosome emulsion. We discovered that it is possible to create a hexagonal hydrophilic LC phase with short-chain nonionic surfactants such as polyethylene glycol alkyl ethers or with high-molecular-weight TB copolymers of type A-B-A. Furthermore, it is possible to successfully stabilize the reverse hexosomes with low hydrophilic-lipophilic balance TB copolymers-either synthesized in our laboratory or commercially available ones-as well as with hydrophobized, commercially available silica nanoparticles.

Lyotropic liquid crystal engineering moving beyond binary compositional space - ordered nanostructured amphiphile self-assembly materials by design

Ordered amphiphile self-assembly materials with a tunable three-dimensional (3D) nanostructure are of fundamental interest, and crucial for progressing several biological and biomedical applications, including in meso membrane protein crystallization, as drug and medical contrast agent delivery vehicles, and as biosensors and biofuel cells. In binary systems consisting of an amphiphile and a solvent, the ability to tune the 3D cubic phase nanostructure, lipid bilayer properties and the lipid mesophase is limited. A move beyond the binary compositional space is therefore required for efficient engineering of the required material properties. In this critical review, the phase transitions upon encapsulation of more than 130 amphiphilic and soluble additives into the bicontinuous lipidic cubic phase under excess hydration are summarized. The data are interpreted using geometric considerations, interfacial curvature, electrostatic interactions, partition coefficients and miscibility of the alkyl chains. The obtained lyotropic liquid crystal engineering design rules can be used to enhance the formulation of self-assembly materials and provides a large library of these materials for use in biomedical applications (242 references).

Hexosomes with Undecylenic Acid Efficient against Candida albicans

Due to the growing issues with fungal infections, especially with Candida, there is still a need to develop novel anti-Candida materials. One of the known antifungal agents is undecylenic acid (UA), which still cannot be efficiently used due to its oily nature, and thus limited solubility. By taking advantage of the properties of UA, we developed an emulsion with hexagonal phase, i.e., hexosomes, whose structure and morphology was studied by small-angle X-ray scattering and cryo-electron microscopy, respectively. The presence of UA in the hexosome was confirmed by spectroscopy. Moreover, we studied the anti-Candida effect of hexosomes and their cytotoxicity toward human cells. The minimal inhibitory concentration for the 50% and 90% Candida-growth reduction was found at 0.01 and 0.16 wt % hexosomes, respectively (i.e., 2 and 32 pghex/C.a.cell, respectively). The percentage of metabolically active Candida was reduced by 72-96% at hexosome concentrations of 1.0-8.2 pghex/C.a.cell as compared to untreated Candida. Furthermore, at the same concentration range the embedded filamentation test after 24 and 48 h showed the inhibition of both the filamentation and growth of Candida, while the preliminary toxicity test showed that hexosomes were nontoxic for human cells. All these render the here-developed hexosomes with UA efficient and promising anti-Candida agents.

Introduction to soft matter and neutron scattering

As an opening lecture to the French-Swedish neutron scattering school held in Uppsala (6th to 9th of December 2016), the basic concepts of both soft matter science and neutron scattering are introduced. Typical soft matter systems like self-assembled surfactants in water, microemulsions, (co-)polymers, and colloids are presented. It will be shown that widely different systems have a common underlying physics dominated by the thermal energy, with astonishing consequences on their statistical thermodynamics, and ultimately rheological properties – namely softness. In the second part, the fundamentals of neutron scattering techniques and in particular small-angle neutron scattering as a powerful method to characterize soft matter systems will be outlined.

Interface tuning and stabilization of monoglyceride mesophase dispersions: Food emulsifiers and mixtures efficiency

Several food surfactants were examined as possible efficient emulsifiers for liquid crystalline monolinolein-based particles and as alternative choices to the non-food-grade emulsifier conventionally used Pluronic® F127. We described a food emulsifiers' toolbox, investigating their ability to emulsify mesophases (stabilization capacity, particle size, zeta potential) and their impact on internal nanostructures (from swelling to drastic modifications). Among the selected surfactants, sucrose stearate (S1670) was found to be the best candidate for replacing in a long term F127 as an efficient stabilizer of lipid particles. The emulsification performed by mixing F127 with S1670 or sodium caseinate (NaCas), and S1670/NaCas helped to discriminate their respective role in the particles and so their efficiency for the stabilization. In case of S1670 as co-emulsifier no strong structural modification was observed, while using F127 (25wt% NaCas) an unexpected hexagonal mesophase was highlighted in self-assemblies. The evolution of zeta potentials by varying the mesophase and the emulsifier also informed about the distribution of co-surfactants in the particles. We thus reported submicronic nanostructured systems (from 100 to 350nm) that were fully food-grade and possibly contained limonene, with a surface charge from -70 to -5mV.

Addition of n-Alcohols Induces a Variety of Liquid-Crystalline Structures in Surfactant-Rich Cores of Dispersed Block Copolymer/Surfactant Nanoparticles

Poly(acrylamide)-b-complex salts made from a symmetric poly(acrylate-b-acrylamide) block copolymer, where the acrylate charges are neutralized by cationic surfactant counterions, form kinetically stable aqueous dispersions of hierarchical aggregates with a liquid-crystalline complex salt core and a diffuse hydrated shell. By the addition of suitable amounts of long-chain alcohols, such as octanol or decanol, the structure of the internal phase can be varied, producing micellar cubic, hexagonal, lamellar, or reverse hexagonal liquid-crystalline phases. In addition, a disordered reverse micellar phase forms at the highest content of octanol. These core structures are the same as those previously obtained for macroscopic homopolymer poly(acrylate) complex salt/water/n-alcohol systems at the corresponding compositions. The poly(acrylamide)-b-complex salt dispersions are kinetically stable for several weeks, with their colloidal properties and internal structures remaining unchanged. The methodology described here establishes an easy and robust protocol for the preparation of colloidal nanoparticles with variable but controlled internal structures.

Direct monitoring of calcium-triggered phase transitions in cubosomes using small-angle X-ray scattering combined with microfluidics

This article introduces a simple microfluidic device that can be combined with synchrotron small-angle X-ray scattering (SAXS) for monitoring dynamic structural transitions. The microfluidic device is a thiol–ene-based system equipped with 125 µm-thick polystyrene windows, which are suitable for X-ray experiments. The device was prepared by soft lithography using elastomeric molds followed by a simple UV-initiated curing step to polymerize the chip material and simultaneously seal the device with the polystyrene windows. The microfluidic device was successfully used to explore the dynamics of the structural transitions of phytantriol/dioleoylphosphatidylglycerol-based cubosomes on exposure to a buffer containing calcium ions. The resulting SAXS data were resolved in the time frame between 0.5 and 5.5 s, and a calcium-triggered structural transition from an internal inverted-type cubic phase of symmetryIm3mto an internal inverted-type cubic phase of symmetryPn3mwas detected. The combination of microfluidics with X-ray techniques opens the door to the investigation of early dynamic structural transitions, which is not possible with conventional techniques such as glass flow cells. The combination of microfluidics with X-ray techniques can be used for investigating protein unfolding, for monitoring the formation of nanoparticles in real time, and for other biomedical and pharmaceutical investigations.

Efficient Cellular Knockdown Mediated by siRNA Nanovectors of Gemini Cationic Lipids Having Delocalizable Headgroups and Oligo-Oxyethylene Spacers

The use of small interfering RNAs (siRNAs) to silence specific genes is one of the most promising approaches in gene therapy, but it requires efficient nanovectors for successful cellular delivery. Recently, we reported liposomal gene carriers derived from a gemini cationic lipid (GCL) of the 1,2-bis(hexadecyl dimethyl imidazolium) oligo-oxyethylene series ((C16Im)2(C2H4O)nC2H4 with n = 1, 2, or 3) and 1,2-dioleyol phosphatidylethanolamine as highly efficient cytofectins for pDNA. On the basis of the satisfactory outcomes of the previous study, the present work focuses on the utility of coliposomes of these gemini lipids with the biocompatible neutral lipid mono oleoyl glycerol (MOG) as highly potent vectors for siRNA cellular transport in the presence of serum. The (C16Im)2(C2H4O)nC2H4/MOG-siRNA lipoplexes were characterized through (i) a physicochemical study (zeta potential, cryo-transmission electron microscopy, small-angle X-ray scattering, and fluorescence anisotropy) to establish the relationship between size, structure, fluidity, and the interaction between siRNA and the GCL/MOG gene vectors and (ii) a biological analysis (flow cytometry, fluorescence microscopy, and cell viability) to report the anti-GFP siRNA transfections in HEK 293T, HeLa, and H1299 cancer cell lines. The in vitro biological analysis confirms the cellular uptake and indicates that a short spacer, a very low molar fraction of GCL in the mixed lipid, and a moderate effective charge ratio of the lipoplex yielded maximum silencing efficacy. At these experimental conditions, the siRNA used in this work is compacted by the GCL/MOG nanovectors by forming two cubic structures (Ia3d and Pm3n) that are correlated with excellent silencing activity. These liposomal nanocarriers possess high silencing activity with a negligible cytotoxicity, which strongly supports their practical use for in vivo knockdown studies.

Cubosomes: remarkable drug delivery potential

Cubosomes are nanostructured liquid crystalline particles, made of certain amphiphilic lipids in definite proportions, known as biocompatible carriers in drug delivery. Cubosomes comprise curved bicontinuous lipid bilayers that are organized in three dimensions as honeycombed structures and divided into two internal aqueous channels that can be exploited by various bioactive ingredients, such as chemical drugs, peptides and proteins. Owing to unique properties such as thermodynamic stability, bioadhesion, the ability of encapsulating hydrophilic, hydrophobic and amphiphilic substances, and the potential for controlled release through functionalization, cubosomes are regarded as promising vehicles for different routes of administration. Based on the most recent reports, this review introduces cubosomes focusing on their structure, preparation methods, mechanism of release and potential routes of administration.

Cuboplexes: Topologically Active siRNA Delivery

RNAi technology is currently experiencing a revival due to remarkable improvements in efficacy and viability through oligonucleotide chemical manipulations and/or via their packaging into nanoscale carriers. At present, there is no FDA-approved system for siRNA technology in humans. The design of the next generation of siRNA carriers requires a deep understanding of how a nanoparticle's physicochemical properties truly impart biological stability and efficiency. For example, we now know that nanoparticles need to be sterically stabilized in order to meet adequate biodistribution profiles. At present, targeting, uptake, and, in particular, endosomal escape are among the most critical challenges impairing RNAi technologies. The disruption of endosomes encompasses membrane transformations (for example, pore formation) that cost significant elastic energy. Nanoparticle size and shape have been identified as relevant parameters impacting tissue accumulation and cellular uptake. In this paper, we demonstrate that the internal structure of lipid-based particles offers a different handle to promote endosomal membrane topological disruptions that enhance siRNA delivery. Specifically, we designed sterically stabilized lipid-based particles that differ from traditional liposomal systems by displaying highly ordered bicontinuous cubic internal structures that can be loaded with large amounts of siRNA. This system differs from traditional siRNA-containing liposomes (lipoplexes) as the particle-endosomal membrane interactions are controlled by elasticity energetics and not by electrostatics. The resulting "PEGylated cuboplex" has the ability to deliver siRNA and specifically knockdown genes with efficiencies that surpass those achieved by traditional lipoplex systems.

Phase behaviour of the ternary system: monoolein-water-branched polyethylenimine

Addition of a branched polymer, polyethyleneimine, significantly alters the organization of a glycerol monooleate (GMO) lipid-water system. We present detailed data over a wide range of compositions (water content from 10 to 40%, relative to GMO and PEI fractions from 0 to 4%) and temperatures (25-80 °C). The PEI molecular weight effects are examined using polymers over a range from 0.8 to 25 kDa. Addition of PEI induces the formation of higher curvature reverse phases. In particular, PEI induces the formation of the Fd3m phase: a discontinuous phase comprising reverse micelles of two different sizes stacked in a cubic AB2 crystal. The formation of the Fd3m phase at room temperature, upon addition of polar, water soluble PEI is unusual, since such phases typically are formed only upon addition of apolar oils. The largest stability window for the Fd3m phase is observed for PEI with a molecular weight = 2 kDa. We discuss how PEI influences the formation and stability of high curvature phases.

Novel steric stabilizers for lyotropic liquid crystalline nanoparticles: PEGylated-phytanyl copolymers

Lyotropic liquid crystalline nanostructured particles (e.g., cubosomes and hexosomes) are being investigated as delivery systems for therapeutics in biomedical and pharmaceutical applications. Long term stability of these particulate dispersions is generally provided by steric stabilizers, typically commercially available amphiphilic copolymers such as Pluronic F127. Few examples exist of tailored molecular materials designed for lyotropic liquid crystalline nanostructured particle stabilization. A library of PEGylated-phytanyl copolymers (PEG-PHYT) with varying PEG molecular weights (200-14K Da) was synthesized to assess their performance as steric stabilizers for cubosomes and to establish structure-property relationships. The PEGylated-lipid copolymers were first found to self-assemble in excess water in the absence of cubosomes and also displayed thermotropic liquid crystal phase behavior under cross-polarized light microscopy. An accelerated stability assay was used to assess the performance of the copolymers, compared to Pluronic F127, for stabilizing phytantriol-based cubosomes. Several of the PEGylated-lipid copolymers showed steric stabilizer effectiveness comparable to Pluronic F127. Using synchrotron small-angle X-ray scattering and cryo-transmission electron microscopy, the copolymers were shown to retain the native internal lyotropic liquid crystalline structure, double diamond cubic phase (Q2(D)), of phytantriol dispersions; an important attribute for controlling downstream performance.

Oil transfer converts phosphatidylcholine vesicles into nonlamellar lyotropic liquid crystalline particles

There is a need for the development of low-energy dispersion methods tailored to the formation of phospholipid-based nonlamellar lyotropic liquid crystalline (LLC) particles for delivery system applications. Here, facile formation of nonlamellar LLC particles was obtained by simple mixing of a phosphatidylcholine (PC) liposome solution and an oil-in-water emulsion, with limonene or isooctane as an oil. The internal structure of the particles was controlled by the PC-to-oil ratio, consistently with the sequence observed in bulk phase. For the first time, reverse micellar cubosomes with Fm3̅m inner structure were produced. The size, morphology, and inner structure of the particles were characterized by small-angle X-ray scattering (SAXS), dynamic light scattering (DLS), and freeze-fracture cryo scanning electron microscopy (cryo-SEM). These findings pave the way to new strategies in low-energy formulation of LLC delivery systems.

Influence of vitamin E acetate and other lipids on the phase behavior of mesophases based on unsaturated monoglycerides

The phase behavior of the ternary unsaturated monoglycerides (UMG)-DL-α-tocopheryl acetate-water system has been studied. The effects of lipid composition in both bulk and dispersed lyotropic liquid crystalline phases and microemulsions were investigated. In excess water, progressive addition of DL-α-tocopheryl acetate to a binary UMG mixture results in the following phase sequence: reversed bicontinuous cubic phase, reversed hexagonal (H(II)) phase, and a reversed microemulsion. The action of DL-α-tocopheryl acetate is then compared to that of other lipids such as triolein, limonene, tetradecane, and DL-α-tocopherol. The impact of solubilizing these hydrophobic molecules on the UMG-water phase behavior shows some common features. However, the solubilization of certain molecules, like DL-α-tocopherol, leads to the presence of the reversed micellar cubic phase (space group number 227 and symmetry Fd3m) while the solubilization of others does not. These differences in phase behavior are discussed in terms of physical-chemical characteristics of the added lipid molecule and its interaction with UMG and water. From an applications point of view, phase behavior as a function of the solubilized content of guest molecules (lipid additive in our case) is crucial since macroscopic properties such as molecular release depend strongly on the phase present. The effect of two hydrophilic emulsifiers, used to stabilize the aqueous dispersions of UMG, was studied and compared. Those were Pluronic F127, which is the most commonly used stabilizer for these kinds of inverted type structures, and the partially hydrolyzed emulsifier lecithin (Emultop EP), which is a well accepted food-grade emulsifier. The phase behavior of particles stabilized by the partially hydrolyzed lecithin is similar to that of bulk sample at full hydration, but this emulsifier interacts significantly with the internal structure and affects it much more than F127.

Optimized loading and sustained release of hydrophilic proteins from internally nanostructured particles

In this study, we demonstrate that emulsified microemulsions and micellar cubosomes are suitable as sustained delivery vehicles for water-soluble proteins. Through structural modifications, the loading efficiency of two model proteins, namely bovine serum albumin (BSA) and cytochrome c could be remarkably increased. A procedure for preparing these particles loaded with optimized amounts of sensitive substances is presented. Loading and dispersion at low temperatures is performed in two successive steps. First, a water-in-oil microemulsion is loaded with the proteins. Subsequently, this phase is dispersed in water resulting in particles with microemulsion and micellar cubic internal structure and a size of approximately 620 nm. This two-step method ensures optimal loading of the particles with the proteins. These nanostructured particles are able to sustain the release of the water-soluble BSA and cytochrome c. Within one day, less than 10% of BSA and 15% of cytochrome c are released. The release rate of cytochrome c is influenced by the nanostructure of the particles.

Lipid crystallization: from self-assembly to hierarchical and biological ordering

Lipid crystallization is ubiquitous in nature, observed in biological structures as well as in commercial products and applications. In a dehydrated state most of the lipids form well ordered crystals, whereas in an aqueous environment they self-assemble into various crystalline, liquid crystalline or sometimes macroscopically disordered phases. Lipid self-organization extends further to hierarchical levels including structured emulsions and nanostructured particles. Many consumer products including cosmetics, foods and medicines account for such lipid architectures. Cell membranes primarily consist of planar lipid bilayers; however sub-cellular biomembranes are more of a convoluted type. Some of the biological entities have lipids in truly crystalline form; yet liquid crystalline lipid phases are prevalent, in general. Crystallization of fats - triglyceride lipids - has been relatively well documented and reviewed more often, but this review features other areas where lipid organization is crucial and diverse. Some recent advances along with a few explicit examples of model lipid phases and biological evidences are also reported.

Small-Angle X-ray Scattering Investigations of Biomolecular Confinement, Loading, and Release from Liquid-Crystalline Nanochannel Assemblies

This Perspective explores the recent progress made by means of small-angle scattering methods in structural studies of phase transitions in amphiphilic liquid-crystalline systems with nanochannel architectures and outlines some future directions in the area of hierarchically organized and stimuli-responsive nanochanneled assemblies involving biomolecules. Time-resolved small-angle X-ray scattering investigations using synchrotron radiation enable monitoring of the structural dynamics, the modulation of the nanochannel hydration, as well as the key changes in the soft matter liquid-crystalline organization upon stimuli-induced phase transitions. They permit establishing of the inner nanostructure transformation kinetics and determination of the precise sizes of the hydrophobic membraneous compartments and the aqueous channel diameters in self-assembled network architectures. Time-resolved structural studies accelerate novel biomedical, pharmaceutical, and nanotechnology applications of nanochannel soft materials by providing better control of DNA, peptide and protein nanoconfinement, and release from diverse stimuli-responsive nanocarrier systems.

Immobilization of nanostructured lipid particles in polysaccharide films

Lipid-based equilibrium self-assemblies and their hierarchically ordered forms have been known since the last few decades. Related progress in colloids and interface science led the development of oil-in-water type internally self-assembled lipid particles, known as Isasomes, which have aroused great interest in biotechnological applications. These submicrometer-sized lipid particles are internally nanostructured in a form of various liquid-crystalline or microemulsion phases, which facilitate their loading with hydrophilic, hydrophobic, and amphiphilic molecules. Their internal nanostructure can also be finely tuned. Recently, it has been shown that Isasomes can be entrapped in thermoreversible polysaccharide hydrogels. Herein, we report on the immobilization of Isasomes in solid polysaccharide films prepared by drying particle-loaded κ-carrageenan and methyl cellulose-based hydrogels. These rather simple but elegant media facilitate the storage of these functional particles and their subsequent release by simple resolubilization in water and/or thermal transitions. Systematic rehydration studies of such Isasome-loaded films have shown that the Isasomes can be remobilized and/or recovered after resolubilization of loaded films, even after several months.

Self-assembled structures and pKa value of oleic acid in systems of biological relevance

In the human digestion process, triglycerides are hydrolyzed by lipases to monoglycerides and the corresponding fatty acids. Here we report the self-assembly of structures in biologically relevant, emulsified oleic acid-monoolein mixtures at various pH values and oleic acid concentrations. Small-angle X-ray scattering, cryogenic transmission electron microscopy, and dynamic light scattering were used to investigate the structures formed, and to follow their transitions while these factors were varied. The addition of oleic acid to monoolein-based cubosomes was found to increase the critical packing parameter in the system. Structural transitions from bicontinuous cubosomes through hexosomes and micellar cubosomes (Fd3m symmetry) to emulsified microemulsions occur with increasing oleic acid concentration. At sufficiently high oleic acid concentration, the internal particle structure was also found to strongly depend on the pH of the aqueous phase: transformations from emulsified microemulsion through micellar cubosomes, hexosomes, and bicontinuous cubosomes to vesicles can be observed as a function of increasing pH. The reversible transition from liquid crystals to vesicles occurs at intestinal pH values (between pH 7 and 8). The hydrodynamic radius of the particles decreases from around 120 nm for internally structured particles to around 60 nm for vesicles. All transitions with pH are reversible. Finally, the apparent pK(a) for oleic acid in monoolein could be determined from the change of structure with pH. This value is within the physiological pH range of the intestine and depends somewhat on composition.