Soft lithographic patterning of spin crossover nanoparticles

Defying the inverse energy gap law: a vacuum-evaporable Fe(ii) low-spin complex with a long-lived LIESST state

The novel vacuum-evaporable complex [Fe(pypypyr)₂] (pypypyr = bipyridyl pyrrolide) was synthesised and analysed as bulk material and as a thin film. In both cases, the compound is in its low-spin state up to temperatures of at least 510 K. Thus, it is conventionally considered a pure low-spin compound. According to the inverse energy gap law, the half time of the light-induced excited high-spin state of such compounds at temperatures approaching 0 K is expected to be in the regime of micro- or nanoseconds. In contrast to these expectations, the light-induced high-spin state of the title compound has a half time of several hours. We attribute this behaviour to a large structural difference between the two spin states along with four distinct distortion coordinates associated with the spin transition. This leads to a breakdown of single-mode behaviour and thus drastically decreases the relaxation rate of the metastable high-spin state. These unprecedented properties open up new strategies for the development of compounds showing light-induced excited spin state trapping (LIESST) at high temperatures, potentially around room temperature, which is relevant for applications in molecular spintronics, sensors, displays and the like.

Sublimable Spin-Crossover Complexes: From Spin-State Switching to Molecular Devices

Spin-crossover (SCO) active transition metal complexes are an important class of switchable molecular materials due to their bistable spin-state switching characteristics at or around room temperature. Vacuum-sublimable SCO complexes are a subclass of SCO complexes suitable for fabricating ultraclean spin-switchable films desirable for applications, especially in molecular electronics/spintronics. Consequently, on-surface SCO of thin-films of sublimable SCO complexes have been studied employing spectroscopy and microscopy techniques, and results of fundamental and technological importance have been obtained. This Review provides complete coverage of advances made in the field of vacuum-sublimable SCO complexes: progress made in the design and synthesis of sublimable functional SCO complexes, on-surface SCO of molecular and multilayer thick films, and various molecular and thin-film device architectures based on the sublimable SCO complexes.

Spin Crossover Nanomaterials: From Fundamental Concepts to Devices

Nanoscale spin crossover materials capable of undergoing reversible switching between two electronic configurations with markedly different physical properties are excellent candidates for various technological applications. In particular, they can serve as active materials for storing and processing information in photonic, mechanical, electronic, and spintronic devices as well as for transducing different forms of energy in sensors and actuators. In this progress report, a brief overview on the current state-of-the-art of experimental and theoretical studies of nanomaterials displaying spin transition is presented. Based on these results, a detailed analysis and discussions in terms of finite size effects and other phenomena inherent to the reduced size scale are provided. Finally, recent research devices using spin crossover complexes are highlighted, emphasizing both challenges and prospects.

Synthesis of Coordination Polymer Nanoparticles using Self-Assembled Block Copolymers as Template

Nowadays there is a high demand in specialized functional materials, for example, for applications as sensors in biomedicine. For the realization of such applications, nanostructures and the integration in a composite matrix are indispensable. Coordination polymers and networks, for example, with spin crossover properties, are a highly promising family of switchable materials in which the switching process can be triggered by various external stimuli. An overview over different strategies for the synthesis of nanoparticles of such systems is given. A special focus is set on the use of block copolymer micelles as templates for the synthesis of nanocomposites. The block copolymer defines the final size and shape of the nanoparticle core. Additionally it allows a further functionalization of the obtained nanoparticles by variation of the polymer blocks and an easy deposition of the composite material on surfaces.

Prototypical iron(ii) complex with 4-amino-1,2,4-triazole reinvestigated: an unexpected impact of water on spin transition

Variations in the outerspheric water molecule content induce drastic and unpredictable changes in the spin crossover regimes.

Pressure and Temperature Sensors Using Two Spin Crossover Materials

The possibility of a new design concept for dual spin crossover based sensors for concomitant detection of both temperature and pressure is presented. It is conjectured from numerical results obtained by mean field approximation applied to a Ising-like model that using two different spin crossover compounds containing switching molecules with weak elastic interactions it is possible to simultaneously measure P and T. When the interaction parameters are optimized, the spin transition is gradual and for each spin crossover compounds, both temperature and pressure values being identified from their optical densities. This concept offers great perspectives for smart sensing devices.

Unravelling the chemical design of spin-crossover nanoparticles based on iron(ii)-triazole coordination polymers: towards a control of the spin transition

A systematic study of the key synthetic parameters that control the growth of spin-crossover (SCO) nanoparticles (NPs) using the reverse micelle technique has been undertaken in the system [Fe(Htrz)2(trz)](BF4)·H2O, (Htrz = 1,2,4-triazole). This has permitted us to modulate the physical properties of the NPs in a controlled and reproducible manner. In particular, a control over the size of the NPs (in the range 4 to 16 nm) has been achieved by varying the water to surfactant molar ratio. The consequences of this size variation on the cooperativity of the spin transition are discussed. Finally, this approach has been extended to the chemical alloy [Fe(Htrz)2.95(NH2trz)0.05](ClO4)2 in order to prepare NPs exhibiting a cooperative and hysteretic spin transition centred closer to room temperature.

Thin films of spin-crossover coordination polymers with large thermal hysteresis loops prepared by nanoparticle spin coating

Spin-crossover nanoparticles form homogeneous thin films on substrates, which show abrupt spin transitions with large thermal hysteresis loops.

Tuning size and magnetic thermal hysteresis in a new near room temperature spin crossover compound

A mononuclear spin crossover compound Fe(AP-Mesal)2, which exhibits spin transitions near room temperature and light induced excited spin state trapping (LIESST) effects at low temperature, was synthesized and substructured in the form of micro- and nanoscaled particles. A thermal hysteresis loop was detected with particle size reduction to microscale and nanoscale.

Robust spin crossover platforms with synchronized spin switch and polymer phase transition

The idea of developing magnetic molecular materials into real functional electronic devices with low-cost and scalable techniques appeared with the emergence of the field several years ago. Today, even though great advances have been done with this aim, the promise of a functional device working at the micro-/nanoscale and at room temperature has unfortunately not completely materialized yet, as their use still strongly depends on the fabrication methodology of a robust device that can be handled and integrated without compromising their functionality. Here we propose the use of polymeric matrices as a platform for the development of such robust switchable structures exhibiting reproducible results independently of the dimension -from macro to micro-/nanoscale- and morphology -from thin-films to nanoparticles and nanoimprinted motives- while allowing to induce an irreversible hysteresis, reminiscent of a non-volatile memory, by synchronization with the polymer phase transition.

Status and perspectives in thin films and patterning of spin crossover compounds

Spin crossover compounds are a class of functional materials able to switch their spin state upon external stimuli. They were proposed as potential candidates for several technological applications that require highly controlled thin films and patterns. Here we present a critical overview of the most important approaches for thin film growth and patterning of spin-crossover compounds, giving special attention to Fe(II) based molecules, which are the most studied materials. We present both conventional approaches to thin film growth (Langmuir-Blodgett, constructive chemical approach, spin coating, drop casting and vacuum sublimation) and patterning (combined top-down/bottom-up method, soft and unconventional lithography). We critically discuss the application of thin film growth and fabrication techniques highlighting the most critical aspects and the perspectives opened by the recent progress.

Pressure and temperature spin crossover sensors with optical detection

Iron(II) spin crossover molecular materials are made of coordination centres switchable between two states by temperature, pressure or a visible light irradiation. The relevant macroscopic parameter which monitors the magnetic state of a given solid is the high-spin (HS) fraction denoted n_HS, i.e., the relative population of HS molecules. Each spin crossover material is distinguished by a transition temperature T_1/2 where 50% of active molecules have switched to the low-spin (LS) state. In strongly interacting systems, the thermal spin switching occurs abruptly at T_1/2. Applying pressure induces a shift from HS to LS states, which is the direct consequence of the lower volume for the LS molecule. Each material has thus a well defined pressure value P_1/2. In both cases the spin state change is easily detectable by optical means thanks to a thermo/piezochromic effect that is often encountered in these materials. In this contribution, we discuss potential use of spin crossover molecular materials as temperature and pressure sensors with optical detection. The ones presenting smooth transitions behaviour, which have not been seriously considered for any application, are spotlighted as potential sensors which should stimulate a large interest on this well investigated class of materials.

Molecular spin crossover phenomenon: recent achievements and prospects

Recently we assisted a strong renewed interest in the fascinating field of molecular spin crossover complexes by (1) the emergence of nanosized spin crossover materials through direct synthesis of coordination nanoparticles and nanopatterned thin films as well as by (2) the use of novel sophisticated high spatial and temporal resolution experimental techniques and theoretical approaches for the study of spatiotemporal phenomena in cooperative spin crossover systems. Besides generating new fundamental knowledge on size-reduction effects and the dynamics of the spin crossover phenomenon, this research aims also at the development of practical applications such as sensor, display, information storage and nanophotonic devices. In this critical review, we discuss recent work in the field of molecule-based spin crossover materials with a special focus on these emerging issues, including chemical synthesis, physical properties and theoretical aspects as well (223 references).

Structure:function relationships in molecular spin-crossover complexes

Spin-crossover compounds are becoming increasingly popular for device and sensor applications, and in soft materials, that make use of their switchable colour, paramagnetism and conductivity. The de novo design of new solid spin-crossover compounds with pre-defined switching properties is desirable for application purposes. This challenging problem of crystal engineering requires an understanding of how the temperature and cooperativity of a spin-transition are influenced by the structure of the bulk material. Towards that end, this critical review presents a survey of molecular spin-crossover compounds with good availability of crystallographic data. A picture is emerging that changes in molecular shape between the high- and low-spin states, and the ability of a lattice to accommodate such changes, can play an important role in determining the existence and the cooperativity of a thermal spin-transition in the solid state (198 references).

Thin deposits and patterning of room-temperature-switchable one-dimensional spin-crossover compounds

We present a study on thin deposits and patterning of 1-D spin-crossover compounds Fe(II)-(L)(2)H](ClO(4))(3)·MeOH [L = 4'-(4'''-pyridyl)-1,2':6'1''-bis- (pyrazolyl) pyridine] (1) that exhibit a reversible, thermally driven spin transition at room temperature. Micrometric rodlike crystals of 1 on silicon surfaces are achieved by drop casting and solvent annealing. We observed that the crystallinity of thin deposits and spin-transition properties critically depends on the deposition procedure. Furthermore, we proved processability and patterning using unconventional wet lithography that reduces the crystallite formation time by 1 order of magnitude. Thin deposits of 1 were characterized by atomic force microscopy, polarized optical microscopy and X-rays, and the switching properties were characterized by Raman spectroscopy.