Supramolecular structures generated by a p-tert-butylphenylamide derivative of deoxycholic acid. From planar sheets to tubular structures through helical ribbons

Highly Hydrophilic and Lipophilic Derivatives of Bile Salts

Lipophilicity of 15 derivatives of sodium cholate, defined by the octan-1-ol/water partition coefficient (log P), has been theoretically determined by the Virtual log P method. These derivatives bear highly hydrophobic or highly hydrophilic substituents at the C3 position of the steroid nucleus, being linked to it through an amide bond. The difference between the maximum value of log P and the minimum one is enlarged to 3.5. The partition coefficient and the critical micelle concentration (cmc) are tightly related by a double-logarithm relationship (VirtuallogP=-(1.00±0.09)log(cmcmM)+(2.79±0.09)), meaning that the Gibbs free energies for the transfer of a bile anion from water to either a micelle or to octan-1-ol differ by a constant. The equation also means that cmc can be used as a measurement of lipophilicity. The demicellization of the aggregates formed by three derivatives of sodium cholate bearing bulky hydrophobic substituents has been studied by surface tension and isothermal titration calorimetry. Aggregation numbers, enthalpies, free energies, entropies, and heat capacities, ΔCP,demic, were obtained. ΔCP,demic, being positive, means that the interior of the aggregates is hydrophobic.

Physiology and Physical Chemistry of Bile Acids

Bile acids (BAs) are facial amphiphiles synthesized in the body of all vertebrates. They undergo the enterohepatic circulation: they are produced in the liver, stored in the gallbladder, released in the intestine, taken into the bloodstream and lastly re-absorbed in the liver. During this pathway, BAs are modified in their molecular structure by the action of enzymes and bacteria. Such transformations allow them to acquire the chemical-physical properties needed for fulling several activities including metabolic regulation, antimicrobial functions and solubilization of lipids in digestion. The versatility of BAs in the physiological functions has inspired their use in many bio-applications, making them important tools for active molecule delivery, metabolic disease treatments and emulsification processes in food and drug industries. Moreover, moving over the borders of the biological field, BAs have been largely investigated as building blocks for the construction of supramolecular aggregates having peculiar structural, mechanical, chemical and optical properties. The review starts with a biological analysis of the BAs functions before progressively switching to a general overview of BAs in pharmacology and medicine applications. Lastly the focus moves to the BAs use in material science.

Bile Salts: Natural Surfactants and Precursors of a Broad Family of Complex Amphiphiles

Bile salts (BSs) are naturally occurring rigid surfactants with a steroidal skeleton and specific self-assembly and interface behaviors. Using bile salts as precursors, derivatives can be synthesized to obtain molecules with specific functionalities and amphiphilic structure. Modifications on single molecules are normally performed by substituting the least-hindered hydroxyl group on carbon C-3 of the steroidal A ring or at the end of the lateral chain. This leads to monosteroidal rigid building blocks that are often able to self-organize into 1D structures such as tubules, twisted ribbons, and fibrils with helical supramolecular packing. Tubular aggregates are of particular interest, and they are characterized by cross-section inner diameters spanning a wide range of values (3-500 nm). They can form through appealing pH- or temperature-responsive aggregation and in mixtures of bile salt derivatives to provide mixed tubules with tunable charge and size. Other derivatives can be prepared by covalently linking two or more bile salt molecules to provide complex systems such as oligomers, dendrimers, and polymeric materials. The unconventional amphiphilic molecular structure imparts specific features to BSs and derivatives that can be exploited in the formulation of capsules, drug carriers, dispersants, and templates for the synthesis of nanomaterials.

Hydrogen bonding asymmetric star-shape derivative of bile acid leads to supramolecular fibrillar aggregates that wrap into micrometer spheres

We report that star-shaped molecules with cholic acid cores asymmetrically grafted by low molecular weight polymers with hydrogen bonding end-groups undergo aggregation to nanofibers, which subsequently wrap into micrometer spherical aggregates with low density cores. Therein the facially amphiphilic cholic acid (CA) is functionalized by four flexible allyl glycidyl ether (AGE) side chains, which are terminated with hydrogen bonding 2-ureido-4[1H]pyrimidinone (UPy) end-groups as connected by hexyl spacers, denoted as CA(AGE6-C6H12-UPy)4. This wedge-shaped molecule is expected to allow the formation of a rich variety of solvent-dependent structures due to the complex interplay of interactions, enabled by its polar/nonpolar surface-active structure, the hydrophobicity of the CA in aqueous medium, and the possibility to control hydrogen bonding between UPy molecules by solvent selection. In DMSO, the surfactant-like CA(AGE6-C6H12-UPy)4 self-assembles into nanometer scale micelles, as expected due to its nonpolar CA apexes, solubilized AGE6-C6H12-UPy chains, and suppressed mutual hydrogen bonds between the UPys. Dialysis in water leads to nanofibers with lateral dimensions of 20-50 nm. This is explained by promoted aggregation as the hydrogen bonds between UPy molecules start to become activated, the reduced solvent dispersibility of the AGE-chains, and the hydrophobicity of CA. Finally, in pure water the nanofibers wrap into micrometer spheres having low density cores. In this case, strong complementary hydrogen bonds between UPy molecules of different molecules can form, thus promoting lateral interactions between the nanofibers, as allowed by the hydrophobic hexyl spacers. The wrapping is illustrated by transmission electron microscopy tomographic 3D reconstructions. More generally, we foresee hierarchically structured matter bridging the length scales from molecular to micrometer scale by sequentially triggering supramolecular interactions.

On the self-assembly of a tryptophan labeled deoxycholic acid

Self-assembly of peptides and bile acids has been widely investigated because of their biological role and their potential as a tool for the preparation of nanostructured biomaterials. We herein report both the synthesis and the self-association behavior of a compound that combines the aggregation properties of bile acid- and amino acid-based molecules. The derivative has been prepared by introducing a L-tryptophan residue into the C-3 position of the deoxycholic acid skeleton and resulted in an amphoteric fluorescent labeled bile acid that shows a pH-dependent self-assembly. Under alkaline conditions it assembles into 28 nm diameter tubules, thus showing a completely different behavior compared to the precursor bile acid, which forms micelles under similar conditions. Upon heating the tubules break and turn into micelles, leading to an increase in the exposure to water of the tryptophan residue. On the other hand, in acidic solutions it aggregates into elongated micelles that further self-assemble forming a gel network, when an electrolyte is added.

Characterization of carbon nanotube dispersions in solutions of bile salts and derivatives containing aromatic substituents

Bile salts (BS) are known to solubilize high weight fractions of carbon nanotubes (CNTs) in aqueous solutions. Here, the efficiency of derivatives of bile salts (BSDs) containing aromatic substituents in dispersing single-wall CNTs (SWCNTs) has been investigated in order to check whether the presence of aromatic residues, because of their affinity toward carbon nanotube surfaces, determines improvements of the BS dispersion efficiency (DE). Electric arc and CoMoCAT SWCNTs were analyzed. The results, reported for the two surfactant concentrations of 0.06 and 1.0 wt %, show that the DE of BSDs depends on the position, orientation, and structure of the introduced aromatic residues. In the case of the CoMoCAT SWCNTs, at low surfactant concentration a DE improvement is observed in BSDs where the aromatic residue is linked either to carbon 3, located on the rigid four-ring system, or to the side chain. For the latter, this improvement is also enhanced in double-charge derivatives and kept at high surfactant concentration. It was also observed that at low concentrations of surfactant, the DE values of BSs and BSDs are usually larger than those of the more conventional detergent sodium dodecylsulfate.

Catanionic gels based on cholic acid derivatives

In this paper, the preparation and characterization of an anionic and a cationic surfactant obtained by chemical modifications of a natural bile acid (cholic acid) are reported. The bile acid was modified by introducing a diamine or a dicarboxylic aromatic residue on the lateral chain. The pure cationic surfactant self-assembles in a network of fibers with a cross-section gyration radius of about 15.1 Å, providing hydrogels with a pH-dependent compactness. On the other hand, the anionic molecule gives rise to prolate ellipsoid micelles. Homogeneous catanionic mixtures have also been obtained, with molar fraction of each surfactant ranging from 0.125 to 0.875. At total surfactant concentration of 0.05% (w/v), the mixtures form gels of fibrils partially arranged in secondary twisted superstructures. Comparison of this concentration with the minimum gelation concentration of the pure cationic derivative (0.16% w/v) suggests that, in the mixtures, the presence of the electrostatic component in self-assembly of the molecules allows the formation of gels starting from more dilute samples. In view of these achievements, this work suggests that catanionic mixtures can be exploited to enhance the efficiency of gelators.

Between peptides and bile acids: self-assembly of phenylalanine substituted cholic acids

Biocompatible molecules that undergo self-assembly are of high importance in biological and medical applications of nanoscience. Peptides and bile acids are among the most investigated due to their ability to self-organize into many different, often stimuli-sensitive, supramolecular structures. With the aim of preparing molecules mixing the aggregation properties of bile acid and amino acid-based molecules, we report on the synthesis and self-association behavior of two diastereomers obtained by substituting a hydroxyl group of cholic acid with a l-phenylalanine residue. The obtained molecules are amphoteric, and we demonstrate that they show a pH-dependent self-assembly. Both molecules aggregate in globular micelles at high pH, whereas they form tubular superstructures under acid conditions. Unusual narrow nanotubes with outer and inner cross-section diameters of about 6 and 3 nm are formed by the derivatives. The diasteroisomer with α orientation of the substituent forms in addition a wider tubule (17 nm cross-section diameter). The ability to pack in supramolecular tubules is explained in terms of a wedge-shaped bola-form structure of the derivatives. Parallel or antiparallel face-to-face dimers are hypothesized as fundamental building blocks for the formation of the narrow and wide nanotubes, respectively.

pH sensitive tubules of a bile acid derivative: a tubule opening by release of wall leaves

Tubules formed by self-assembly of organic molecules have vast potential for nanotechnology applications, and the introduction of sensitivity to stimuli into self-assembly tubules represents a particularly attractive feature. Here we report the preparation and characterization of a molecule obtained by chemical modification of a natural bile acid, a biological surfactant, that self-assembles in pH sensitive tubules in aqueous solutions. The tubules, which are rigid, single-walled and with a diameter of 60 nm, form at pH 8-9 and open up when the pH is increased. The transition is reversible, it occurs in the pH range of 9-10 with an opening mechanism that is remarkably different from those so far proposed in the literature. It involves a release of wall layers similar to leaves, and is determined by a drastic pH-triggered change in the molecular arrangement, which in turn induces a radical modification of the wall curvature. The description of the morphological transformation is provided by means of cryogenic transmission electron microscopy and represents, to our knowledge, the first detailed visualization of pH stimulated tubule opening. UV and circular dichroism spectroscopies are used to investigate the evolution at the molecular level.

Drug-loaded nanoparticles and supramolecular nanotubes formed from a volatile microemulsion with bile salt derivatives

The main objective of this study was to form nanoparticles of a model hydrophobic drug, celecoxib, from a volatile microemulsion stabilized by a bile salt derivative. Nanoparticles were obtained by conversion of the microemulsion nanodroplets with the dissolved drug into solid nanometric particles. The use of bile salt derivatives as the surfactants for the formation of a microemulsion enabled significantly higher loading of the drug in both the microemulsion and nanoparticles, compared with the native bile salt. In addition, superior stability of the particles was achieved with the bile salt derivatives, and drug crystallization was inhibited. Interestingly, differences in particle stability and crystallization inhibition were observed between two bile salt derivatives differing only by one hydroxyl group on the bile salt backbone, indicating the delicate balance of interactions in the system. For one of the derivatives, upon dispersion of the nanoparticles in water, they spontaneously arranged into well-defined elongated nanometric tubules as detected and attested by cryo-TEM. It was found that the drug present in nanoparticles induces formation of the nanotubes.

Formation of tubules by p-tert-butylphenylamide derivatives of chenodeoxycholic and ursodeoxycholic acids in aqueous solution

The formation of tubules by p-tert-butylphenylamide derivatives of chenodeoxycholic and ursodeoxycholic acids in aqueous solution is investigated. The critical aggregation concentrations of the new surfactants are much lower than those of ursodeoxycholate and chenodeoxycholate, indicating the enhanced surfactant properties resulting by the presence of the hydrophobic p-tert-butylphenyl group. The molecular areas at the air-water interface suggest the formation of monolayer films with molecules upright oriented. The shape of the aggregates was investigated by TEM. The main structure present in solution corresponds to tubules. The estimated value for the wall thickness of tubules suggests that a bilayer structure is formed. Host of positively charged latex beads by tubules suggests that their inner and outer surfaces are negatively charged. The acid form of the chenodeoxycholate derivative was recrystallized from toluene and its crystal structure analyzed.