Flow-Induced Alignment of Block Copolymer−Sol Nanoparticle Coassemblies toward Oriented Bulk Polymer−Silica Hybrids

Mesostructured Materials with Controllable Long-Range Orientational Ordering and Anisotropic Properties

Inorganic-organic mesophase materials provide a wide range of tunable properties, which are often highly dependent on their nano-, micro-, or meso-scale compositions and structures. Among these are macroscopic orientational order and corresponding anisotropic material properties, the adjustability of which are difficult to achieve. This is due to the complicated transient and coupled transport, chemical reaction, and surface processes that occur during material syntheses. By understanding such processes, general criteria are established and used to prepare diverse mesostructured materials with highly aligned channels with uniform nanometer dimensions and controllable directionalities over macroscopic dimensions and thicknesses. This is achieved by using a micropatterned semipermeable poly(dimethylsiloxane) stamp to manage the rates, directions, and surfaces at which self-assembling phases nucleate and the directions that they grow. This enables mesostructured surfactant-directed silica and titania composites, including with functional guest species, and mesoporous carbons to be prepared with high degrees of hexagonal order, as well as controllable orthogonal macroscopic orientational order. The resulting materials exhibit novel anisotropic properties, as demonstrated by the example of direction-dependent photocurrent generation, and are promising for enhancing the functionality of inorganic-organic nanocomposite materials in separations, catalysis, and energy conversion applications.

Cobalt nanoparticles growth on a block copolymer thin film: a time-resolved GISAXS study

Cobalt sputter deposition on a nanostructured polystyrene-block-poly(ethylene oxide), P(S-b-EO), template is followed in real time with grazing incidence small-angle X-ray scattering (GISAXS). The polymer template consists of highly oriented parallel crystalline poly(ethylene oxide) (PEO) domains that are sandwiched between two polystyrene (PS) domains. In-situ GISAXS shows that cobalt atoms selectively decorate the PS domains of the microphase-separated polymer film and then aggregate to form surface metal nanopatterns. The polymer template is acting as a directing agent where cobalt metal nanowires are formed. At high metal load, the characteristic selectivity of the template is lost, and a uniform metal layer forms on the polymer surface. During the early stage of cobalt metal deposition, a highly asymmetric nanoparticles agglomeration is dominating structure formation. The cobalt nanoparticles mobility in combination with the high tendency of the nanoparticles to coalescence and to form immobile large-sized particles at the PS domains are discussed as mechanisms of structure formation.

Mesoporous structures confined in anodic alumina membranes

The synthesis of nanoporous membranes based on different concepts and materials is a field of active research. This review focuses on the synthesis strategies, mesophase evolution mechanisms and potential applications of mesoporous materials confined within anodic alumina membranes (AAM). Following a rapid evolution of synthetic techniques, a significant number of different mesoporous materials (e.g., silica, titania, and carbon) with highly regular structures can now be prepared within these membranes. In recent years, efforts have also been made to understand the formation mechanisms of these hierarchical mesophases. The resulting organized nanoporous membranes open up a wide range of potential applications in fields such as templating oriented nanowires and controlled separation and release of molecules. For example, while various synthesis strategies can be used for the preparation of membrane-embedded nanowires, the latter can also be obtained as isolated objects after dissolution of the alumina host matrix. The review also discusses issues such as control of structural defects or integrity of interfaces that should be addressed in future research in order to fully exploit the potential of these hierarchical mesoporous channel structures.

Memory effects in annealed hybrid gold nanoparticles/block copolymer bilayers

We report on the use of the self-organization process of sputtered gold nanoparticles on a self-assembled block copolymer film deposited by horizontal precipitation Langmuir-Blodgett (HP-LB) method. The morphology and the phase-separation of a film of poly-n-butylacrylate-block-polyacrylic acid (PnBuA-b-PAA) were studied at the nanometric scale by using atomic force microscopy (AFM) and Time of Flight Secondary Ion Mass Spectrometry (TOF-SIMS). The templating capability of the PnBuA-b-PAA phase-separated film was studied by sputtering gold nanoparticles (NPs), forming a film of nanometric thickness. The effect of the polymer chain mobility onto the organization of gold nanoparticle layer was assessed by heating the obtained hybrid PnBuA-b-PAA/Au NPs bilayer at T >Tg. The nanoparticles' distribution onto the different copolymer domains was found strongly affected by the annealing treatment, showing a peculiar memory effect, which modifies the AFM phase response of the Au NPs layer onto the polar domains, without affecting their surfacial composition. The effect is discussed in terms of the peculiar morphological features induced by enhanced mobility of polymer chains on the Au NPs layer.

Ordered three- and five-ply nanocomposites from ABC block terpolymer microphase separation with niobia and aluminosilicate sols

We report the first use of a non-frustrated block terpolymer for the synthesis of highly ordered oxide nanocomposites containing multiple plies. The morphological behavior of 15 ISO-oxide nanocomposites was investigated spanning a large range of compositions along the ƒ(I)=ƒ(S) isopleth using aluminosilicate and niobia sols. Morphologies were determined by TEM and SAXS measurements. Four morphologies were identified, including core-shell hexagonal, core-shell double gyroid, three-domain lamellae, and core-shell inverse-hexagonal, in order of increasing O+oxide vol fraction. All of the resulting nanocomposites had three- or five-ply morphologies containing domains that were continuous in one, two, or three dimensions. The five-ply core-shell double gyroid phase was only found to be stable when the O+oxide domain was a minority. Removal of the polymer enabled simple and direct synthesis of mesoporous oxide materials while retaining the ordered network structure. We believe that advances in the synthesis of multi-ply nanocomposites will lead to advanced materials and devices containing multiple plies of functional materials.

Polymer-template-assisted growth of gold nanowires using a novel flow-stream technique

By utilizing a fluidic device, a gold nanoparticle dispersion is cast onto a nanostructured polymer template using solution subjected to hydrodynamic flow. With in situ grazing incidence small-angle X-ray scattering (GISAXS), the progressive gold deposition from a stream of gold solution onto the polymer template of a diblock copolymer with parallel cylinder morphology arranged into powder-like domains is investigated. The continuously flowing solution causes a systematic increase in the X-ray contrast between both of the microphase-separated blocks of the block copolymer film, indicating flow-induced selective gold immobilization on one block. Both in situ GISAXS data and atomic force microscopy of the metal-deposited polymer film prove the 1D coalescence of nanoparticles into continuous nanowires. With additional gold nanoparticle upload by the continuous flow-stream method, the selectivity of the nanoparticle deposition diminishes as a result of the formation of a pseudo uniform gold layer. Consequently, this flow-stream deposition technique introduces an easy alternative method to the vapor deposition technique for surface gold nanopatterning.

In situ GISAXS investigation of gold sputtering onto a polymer template

Microphase-separation structures in mixed diblock-triblock copolymer thin films are used for the incorporation of gold atoms inside the polymer matrix via sputtering of gold. Polystyrene (PS) spheres are arranged in a liquidlike type with a well defined nearest neighbor distance inside a polyisoprene matrix acting as a template for directing the gold atoms. Sputtering conditions are selected with a very low sputtering rate to avoid clustering in the atmosphere so that gold reaches the polymer surface in its atomic state. Due to the mobility of the gold atoms and the selective interaction with the PS parts of the microphase separation structure, gold is accumulated inside the polymer film in the PS spheres, as probed in situ with grazing incidence small-angle X-ray scattering (GISAXS). Nominally 4.3 A of gold is deposited, which by diffusion is spread out vertically over a thickness of 280 nm. UV-vis spectroscopy reveals a small blue shift for the gold sputtered polymer film. Atomic force microscopy proves the absence of gold clusters on the film surface. For low sputtering rate, GISAXS proves good sensitivity for gold migration inside the polymer film and opens new possibilities for studying polymer-metal interaction.

Synthesis, characterization, and morphology studies of biodegradable amphiphilic poly[(R)-3-hydroxybutyrate]-alt-poly(ethylene glycol) multiblock copolymers

Novel biodegradable amphiphilic alternating block copolymers based on poly[(R)-3-hydroxybutyrate] (PHB) as biodegradable and hydrophobic block and poly(ethylene glycol) (PEG) as hydrophilic block (PHB-alt-PEG) were successfully synthesized through coupling reaction. Their chemical structures have been characterized by using gel permeation chromatography, (1)H nuclear magnetic resonance, and Fourier transform infrared spectroscopy. Differential scanning calorimetry (DSC) analysis revealed that both PHB and PEG blocks in PHB-alt-PEG block copolymers can crystallize to form separate crystalline phase except in those with a short PEG block (M(n) 600) only PHB crystalline phase has been observed. However, due to the mutual interference from each other, the melting transition of both PHB and PEG crystalline phases shifted to lower temperature with lower crystallinity in comparison with corresponding pure PHB and PEG. The crystallization behavior of PHB block and PEG block has also been studied by X-ray diffraction, and the results were in good agreement with those deduced from DSC study. The surface morphologies of PHB-alt-PEG block copolymer thin films spin-coated on mica have been visualized by atomic force microscopy with tapping mode, indicating formation of laterally regular lamellar surface patterns. Static water contact angle measurement revealed that surface hydrophilicity of these spin-coated thin films increases with increasing PEG block content.