Comparison of Bond Dissociation Energies of Dormant Species Relevant to Degenerative Transfer and Atom Transfer Radical Polymerization

An aqueous photo-controlled polymerization under NIR wavelengths: synthesis of polymeric nanoparticles through thick barriers

We report an aqueous and near-infrared (NIR) light mediated photoinduced reversible addition-fragmentation chain transfer (photo-RAFT) polymerization system using tetrasulfonated zinc phthalocyanine (ZnPcS4 -) as a photocatalyst. Owing to the high catalytic efficiency and excellent oxygen tolerance of this system, well-controlled polyacrylamides, polyacrylates, and polymethacrylates were synthesized at fast rates without requiring deoxygenation. Notably, NIR wavelengths possess enhanced light penetration through non-transparent barriers compared to UV and visible light, allowing high polymerization rates through barriers. Using 6.0 mm pig skin as a barrier, the polymerization rate was only reduced from 0.36 to 0.21 h-1, indicating potential for biomedical applications. Furthermore, longer wavelengths (higher λ) can be considered an ideal light source for dispersion photopolymerization, especially for the synthesis of large diameter (d) nanoparticles, as light scattering is proportional to d 6/λ 4. Therefore, this aqueous photo-RAFT system was applied to photoinduced polymerization-induced self-assembly (photo-PISA), enabling the synthesis of polymeric nanoparticles with various morphologies, including spheres, worms, and vesicles. Taking advantage of high penetration and reduced light scattering of NIR wavelengths, we demonstrate the first syntheses of polymeric nanoparticles with consistent morphologies through thick barriers.

Selective Photoactivation of Trithiocarbonates Mediated by Metal Naphthalocyanines and Overcoming Activation Barriers Using Thermal Energy

Metal naphthalocyanines (MNcs) were demonstrated to be efficient photocatalysts to activate photoinduced electron-transfer reversible addition-fragmentation chain transfer (PET-RAFT) polymerization, enabling well-controlled polymerization of (meth)acrylates under near-infrared (λ = 780 nm) light. Owing to their lower redox potential compared to previously explored photocatalysts, the activation of trithiocarbonate RAFT agents exhibited a unique selectivity that was dependent on the nature of the R group. Specifically, MNcs were capable in activating tertiary R group trithiocarbonates, whereas no activation of the trithiocarbonate possessing a secondary R group was observed. The combination of density functional theory calculations and experimental studies have revealed new mechanistic insights into the factors governing a PET-RAFT mechanism and explained this unique selectivity of MNcs toward tertiary carbon trithiocarbonates. Interestingly, by increasing the reaction temperature moderately (i.e., ∼15 °C), the energy barrier prohibiting the photoactivation of the trithiocarbonate with a secondary R group was overcome, enabling their successful activation.

PET-RAFT single unit monomer insertion of β-methylstyrene derivatives: RAFT degradation and reaction selectivity

Reversible addition-fragmentation chain transfer (RAFT) single unit monomer insertion (SUMI) of β-methylstyrene derivatives into diverse RAFT agents presented fast reaction kinetics, but significant degradation of the SUMI products occurred due to a hydrogen abstraction reaction. Fortunately, such degradation can be suppressed through appropriate design of initial RAFT agents attributed to effective chain transfer and selective photoactivation.

Visualization of Atom Transfer Radical Polymerization by Aggregation-Induced Emission Technology

Aggregation-induced emission (AIE) technology has been demonstrated to be a facile approach for in-situ monitoring atom transfer radical polymerization (ATRP). A series of tertraphenyl ethylene (TPE)-containing α-bromo compounds were synthesized and applied as ATRP initiators. The photoluminescent (PL) emission of the polymerization system is proved to be sensitive to the local viscosity owing to the AIE characteristics of TPE. Linear relationships between the resulting molecular weight M_n and PL intensity were observed in several polymerization systems with different monomers, indicating the variability of this technique. Compared to physical blending, the chemical bonding of the TPE group in the chain end has higher sensitivity and accuracy to the polymer segments and the surrounding environment. This work promoted the combination of the AIE technique and controlled living radical polymerization, and introduced such an optical research platform to the ATRP polymerization process.

Mechanistically Guided Predictive Models for Ligand and Initiator Effects in Copper-Catalyzed Atom Transfer Radical Polymerization (Cu-ATRP)

Copper-catalyzed atom transfer radical polymerization (Cu-ATRP) is one of the most widely used controlled radical polymerization techniques. Notwithstanding the extensive mechanistic studies in the literature, the transition states of the activation/deactivation of the growing polymer chain, a key equilibrium in Cu-ATRP, have not been investigated computationally. Therefore, the understanding of the origin of ligand and initiator effects on the rates of activation/deactivation is still limited. Here, we present the first computational analysis of Cu-ATRP activation transition states to reveal factors that affect the rates of activation and deactivation. The Br atom transfer between the polymer chain and the Cu catalyst occurs through an unusual bent geometry that involves pronounced interactions between the polymer chain end and the ancillary ligand on the Cu catalyst. Therefore, the rates of activation/deactivation are determined by both the electronic properties of the Cu catalyst and the ligand-initiator steric repulsions. In addition, our calculations revealed the important role of ligand backbone flexibility on the activation. These theoretical analyses led to the identification of three chemically meaningful descriptors, namely HOMO energy of the catalyst ( EHOMO), percent buried volume ( Vbur%), and distortion energy of the catalyst (Δ Edist), to describe the electronic, steric, and flexibility effects on reactivity, respectively. A robust and simple predictive model for ligand effect on reactivity is thereby established by correlating these three descriptors with experimental activation rate constants using multivariate linear regression. Validation using a structurally diverse set of ligands revealed the average error is less than ±2 kcal/mol compared to the experimentally derived activation energies. The same approach was also applied to develop a predictive model for reactivity of different alkyl halide initiators using R-X bond dissociation energy (BDE) and Cu-X halogenophilicity as descriptors.

Photomediated Controlled Radical Polymerization and Block Copolymerization of Vinylidene Fluoride

This review summarizes recent research on novel photochemical methods for the initiation and control of the polymerization of main chain fluorinated monomers as exemplified by vinylidene fluoride (VDF) and for the synthesis of their block copolymers. Such reactions can be carried out at ambient temperature in glass tubes using visible light. Novel, original protocols include the use of hypervalent iodide carboxylates alone or in conjunction with molecular iodine, as well as the use of photoactive transition metal carbonyls in the presence of alkyl, fluoroalkyl, and perfluoroalkyl halides. An in-depth study of the reaction parameters highlights the use of dimethyl carbonate as a preferred polymerization solvent and outlines the structure-property relationship for hypervalent iodide carboxylates and halide initiators in both the free radical and iodine degenerative transfer controlled radical polymerization (IDT-CRP) of VDF. Finally, the rational selection of metal carbonyls that are successful not only as IDT mediators but, more importantly, in the quantitative activation of both PVDF-CH2-CF2-I and PVDF-CF2-CH2-I chain ends toward the synthesis of well-defined PVDF block copolymers is presented.

RAFT synthesis of well-defined PVDF-b-PVAc block copolymers

This article reports that PVDF-b-PVAc diblock copolymers can be synthesized by RAFT polymerization from PVDF macroCTAs and rationalizes this discovery using DFT calculations.

Direct functionalization of poly(vinyl chloride) by photo-mediated ATRP without a deoxygenation procedure

A facile and robust strategy of photo-mediated ATRP to directly modify commercial PVC and surfaces of PVC-based materials without any functional group transformation and deoxygenation procedures was reported.

THERMOCHEMICAL PROPERTIES OF THE THIOCARBONYLTHIO COMPOUNDS FROM CONVENTIONAL DENSITY FUNCTIONAL THEORY CALCULATIONS

Density functional theory (DFT) calculations employed at two levels, B3LYP/6-31G+(d) and B3P86/6-31G+(d), are reported for the geometry, enthalpy, and free energy of reaction of a number of dithiobenzoate reversible addition fragmentation transfer (RAFT) reagents ( S=C(Ph)S–R , S=C(Z)S–CH2Ph ). Based on these theoretical data, the effectiveness of these RAFT reagents is analyzed. The conclusions, especially obtained at B3LYP/6-31G+(d) level, are in good agreement with the experimental results. Our calculations suggest that the dithiobenzoate ( S=C(Z)S–CH2Ph ), where Z is OC6H5 or N(alkyl)2 , is a poor RAFT reagent. Contrarily, the compound S=C(Ph)S–R , where R is C(Me)2Ph or C(Me)2CN , is a highly efficient RAFT reagent. Our results reveal the utility of the theoretical calculations of physical magnitudes for the rationalization of judging the effectiveness of RAFT reagents and demonstrated that DFT is a good method to calculate these data. In addition, our results on the enthalpies and Gibbs free energies of formation for the R radicals are calculated with the same method. These data are important for the design of logical and economical chemical process. Finally, the B3LYP hybrid functional is employed to predict the values of thermodynamic magnitudes for several new ithiobenzoates. Those results need to be verified by future experimental measurements or theoretical calculations.

Synergistic Interaction Between ATRP and RAFT: Taking the Best of Each World

This review covers recent developments on the combination of atom transfer radical polymerization (ATRP) and reversible addition–fragmentation chain transfer (RAFT) polymerization to produce well controlled (co)polymers. This review discusses the relative reactivity of the R group in ATRP and RAFT, provides a comparison of dithiocarbamate (DC), trithiocarbonate (TTC), dithioester (DTE), and xanthate versus bromine or chlorine, and an optimization of catalyst/ligand selection. The level of control in iniferter polymerization with DC was greatly improved by the addition of a copper complex. New TTC inifers with bromopropionate and bromoisobutyrate groups have been prepared to conduct, concurrently or sequentially, ATRP from Br-end groups, ATRP from the TTC moiety, and RAFT polymerization from the TTC moiety, depending on the combination of monomer and catalyst employed in the reaction. The use of concurrent ATRP/RAFT (or copper-catalyzed RAFT polymerization or ATRP with dithioester leaving groups), resulted in improved control over the synthesis of homo- and block (co)polymers and allowed preparation of well-defined high-molecular-weight polymers exceeding 1 million. Block copolymers that could not be prepared previously have been synthesized by sequential ATRP and RAFT polymerization using a bromoxanthate inifer. A simple, versatile, and one-step method involving atom-transfer radical addition–fragmentation (ATRAF) for the preparation of various chain transfer agents (including DC, DTE, and xanthate) in high purity is discussed and a one-pot, two-step polymerization starting with a RAFT agent synthesized by ATRAF, followed by polymerization, is demonstrated.

Living Radical Polymerization by the RAFT Process—A First Update

This paper provides a first update to the review of living radical polymerization achieved with thiocarbonylthio compounds (ZC(=S)SR) by a mechanism of Reversible Addition–Fragmentation chain Transfer (RAFT) published in June 2005. The time since that publication has witnessed an increased rate of publication on the topic with the appearance of well over 200 papers covering various aspects of RAFT polymerization ranging over reagent synthesis and properties, kinetics, and mechanism of polymerization, novel polymer syntheses, and diverse applications.