Self-Assembly of ABC Triblock Copolymer into Giant Segmented Wormlike Micelles in Dilute Solution

Multicompartment Micro- and Nanoparticles Using Supramolecular Assembly of Core-Shell Bottlebrush Polymers

Multicompartment particles have been produced to date by the self-assembly of linear multiblock polymers. Besides the large diversity of structures that can be obtained with this approach, these are highly sensitive to dilution and environmental factors. Here we show that using core-shell bottlebrush polymers with a hydrophobic polyester core as starting materials it is possible to create compartmentalized particles from the micrometer size down to the molecular scale. These polymers can be used as building blocks to create multicompartment particles and networks via a self-assembly process. The polymers can encapsulate active compounds and slowly degrade in water into polymeric micelles, making them promising materials for drug delivery applications.

Modeling Microstructure Formation in Block Copolymer Membranes Using Dynamical Self-Consistent Field Theory

Block copolymers have attracted recent interest as candidate materials for ultrafiltration membranes, due to their ability to form isoporous integral-asymmetric membranes by the combined processes of self-assembly and nonsolvent-induced phase separation (SNIPS). However, the dependence of surface layer and substructure morphologies on the processing variables associated with SNIPS is not well understood nor is the interplay between microphase and macrophase separation in block copolymers undergoing such coagulation. Here, we use dynamical self-consistent field theory to simulate the microstructure evolution of block copolymer films during SNIPS and find that such films form the desired sponge-like asymmetric porous substructure only if the solvent and nonsolvent have opposite block selectivities and that otherwise they form a dense nonporous microphase-separated film. Our results could have important implications for the choices of solvent and nonsolvent in the processing of block copolymer membranes.

Mimicking the Natural World with Nanoarchitectonics for Self-Assembled Superstructures

Scientists are often inspired by nature, where naturally occurring morphologies, such as those that resemble animals and plants, can be created in the lab. In this review, we have provided an overview on complex superstructures of animals, plants and some similar shapes from the natural world. We begin this review with a discussion about the formation of various animal-like shapes from small organic molecules and polymers, and then move onto plants and other selected shapes. Literature surveys reveal that most of the polymers studied tend to form micellar structures, with some exceptions. Nevertheless, small organic molecules tend to form not only micellar structures but also other animal shapes such as worms and caterpillars. These superstructures tend to have high surface areas and variable surface morphology, making them very useful material for applications in various field such as catalysis, solar cells, and biomedicine, amongst others.

Heterotelechelic homopolymers mimicking high χ - ultralow N block copolymers with sub-2 nm domain size

Three fluorinated, hydrophobic initiators have been utilised for the synthesis of low molecular mass fluoro-poly(acrylic acid) heterotelechelic homopolymers to mimic high chi (χ)-low N diblock copolymers with ultrafine domains of sub-2 nm length scale. Polymers were obtained by a simple photoinduced copper(ii)-mediated reversible-deactivation radical polymerisation (Cu-RDRP) affording low molecular mass (<3 kDa) and low dispersity (Đ = 1.04-1.21) homopolymers. Heating/cooling ramps were performed on bulk samples (ca. 250 μm thick) to obtain thermodynamically stable nanomorpologies of lamellar (LAM) or hexagonally packed cylinders (HEX), as deduced by small-angle X-ray scattering (SAXS). Construction of the experimental phase diagram alongside a detailed theoretical model demonstrated typical rod-coil block copolymer phase behaviour for these fluoro-poly(acrylic acid) homopolymers, where the fluorinated initiator-derived segment acts as a rod and the poly(acrylic acid) as a coil. This work reveals that these telechelic homopolymers mimic high χ-ultralow N diblock copolymers and enables reproducible targeting of nanomorphologies with incredibly small, tunable domain size.

Self- and dis-assembly behavior of segmented wormlike nanostructures from an ABC triblock copolymer

Herein, we described the self-assembly of a triblock copolymer, poly(styrene-b-2-vinylpyridine-b-ethylene oxide) (PS-b-P2VP-b-PEO), in THF/water at room temperature to form segmented wormlike nanostructures. We found two different formation mechanisms of the segmented wormlike nanostructures from PS-b-P2VP-b-PEO with different molecular weights. Moreover, the dimension of such segmented wormlike nanostructures depends on the stirring rate. Interestingly, these wormlike nanostructures disassembled gradually when increasing the temperature, which is reversible. After cooling to room temperature the segmented wormlike micelles reformed gradually with stirring. Furthermore, neither intense stirring nor ultrasonic vibration could damage the structure of these wormlike nanostructures which proves their stability and potential application as drug delivery vehicles.

Kinetic Control of Length and Morphology of Segmented Polymeric Nanofibers in Microfluidic Chips

In this work, we report an approach to prepare segmented polymer nanofibers (SPNFs) composed of rodlike subunits by kinetically controlled self-assembly of polystyrene-b-poly(4-vinylpyridine)-based supramolecules in microfluidic chips. The length and morphology of the SPNFs could be effectively adjusted by changing the total flow rate (V_total) and the molar ratio (x) of 4-vinylpyridine (4VP) unit to a hydrogen-bonding molecule, 3-n-pentadecyphenol. Moreover, the subunits of SPNFs could transform from short rods to spheres when the interfacial tension between PS core and solvent increased. On the contrary, the SPNFs elongated along the major axis when the interfacial tension decreased. This work not only offers mechanism insights into the hierarchical self-assembly of block copolymer-based supramolecules but also provides a versatile and effective method for kinetically controlling the hierarchical structures of assemblies.

Self-Assembly of Linear Amphiphilic Pentablock Terpolymer PAAx-PS48-PEO46-PS48-PAAxin Dilute Aqueous Solution

A series of linear amphiphilic pentablock terpolymer PAA_x-b-PS₄₈-b-PEO₄₆-b-PS₄₈-b-PAA_x (A_xS₄₈O₄₆S₄₈A_x) with various lengths x of the PAA block (x = 15, 40, 60, and 90) were synthesized via a two-step atom transfer radical polymerization (ATRP) using Br-poly(ethylene oxide)-Br (Br-PEO₄₆-Br) as the macroinitiator, styrene (St) as the first monomer, and tert-butyl acrylate (tBA) as the second monomer, followed with the hydrolysis of PtBA blocks. The A_xS₄₈O₄₆S₄₈A_x pentablock terpolymers formed micelles in dilute aqueous solution, of which the morphologies were dependent on the length x of the PAA block. Cryogenic transmission electron microscopy (cryo-TEM), dynamic light scattering (DLS), and zeta potential measurement were employed to investigate the morphologies, chain structures, size, and size distribution of the obtained micelles. The morphology of A_xS₄₈O₄₆S₄₈A_x micelles changed from spherical vesicles with ordered porous membranes to long double nanotubes, then to long nanotubes with inner modulated nanotubes or short nanotubes, and finally, to spherical micelles or large compound vesicles with spherical micelles inside when x increased from 15 to 90. The hydrophobic PS blocks formed the walls of vesicles and nanotubes as well as the core of spherical micelles. The hydrophilic PEO and PAA block chains were located on the surfaces of vesicle membranes, nanotubes, and spherical micelles. The PAA block chains were partially ionized, leading to the negative zeta potential of A_xS₄₈O₄₆S₄₈A_x micelles in dilute aqueous solutions.

pH-Responsive Lignin-Based Nanomicelles for Oral Drug Delivery

A pH-stimuli amphiphilic lignin-based copolymer was prepared, and it could self-assemble to form spherical nanomicelles with the addition of "switching" water. The morphology, structure, and physical properties of micelles were characterized with transmission electron microscopy (TEM), nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FTIR), gel permeation chromatography (GPC), particle-size analysis, and zeta-potential measurement. In vitro drug release exemplified that the micelles were pH-sensitive, retaining more than 84.36% ibuprofen (IBU) in simulated gastric fluid (pH 1.5) and presenting a smooth release of 81.81% IBU in simulated intestinal fluid (pH 7.4) within 72 h. Cell culture studies showed that the nanomicelles were biocompatible and boosted the proliferation of human bone marrow stromal cells hBMSC and mouse embryonic fibroblast cells NIH-3T3. Interestingly, the nanomicelles inhibited the survival of human colon cancer cells HT-29 with a final survival rate of only 5.34%. Therefore, this work suggests a novel strategy to synthesize intelligent lignin-based nanomicelles that show a great potential as oral drug carriers.

Assembly of Short-Chain Amphiphilic Homopolymers into Well-Defined Particles

Linear homopolymers of norbornene (NBE) derivatives equipped with short-chain alcohol pendant groups were prepared by ring-opening metathesis polymerization (ROMP) and subsequently assembled into well-defined structures in alcohol solvents. The ratios of hydrophobic carbons and hydrophilic alcohol groups at the repeating monomeric unit in these short-chain amphiphilic polymers were found to play an important role in determining the size and distribution of the final globular structures. Unlike the assembly of other linear homo- and copolymers possessing long-chain amphiphilicity, NBE-based linear polymers were readily transformed into spherical particles with a layered conformation, whose sizes range from a few hundred nanometers to micrometers with narrow distributions, simply by controlling the concentration and molecular weights of the linear homopolymers without using any surfactants. In addition, the degree of the intermolecular forces with solvents (e.g., solvation) possessing different surface tensions and polarities highly affected the final diameter and distribution of the polymer particles, implying the importance of the selection of a proper solvent to regulate their structural features. As such, understanding the assembly of these types of short-chain homopolymers into uniform particles can allow for regulating the transformation of diverse linear amphiphilic polymers into precisely controlled structures for various applications.

Hierarchical self-assembly of a PS-b-P4VP/PS-b-PNIPAM mixture into multicompartment micelles and their response to two-dimensional confinement

Finely tuned synergistic effects among different blocks could realize intriguing hierarchical self-assembly of block copolymers and such hierarchical self-assembly could be manipulated by cylindrical confinement to tune the structures of assemblies.

Solvent Effect on the Self-Assembly of a Thin Film Consisting of Y-Shaped Copolymer

The self-assembly of an amphiphilic Y-shaped copolymer consisting of two hydrophilic branches and one hydrophobic branch in a thin film is investigated under different conditions by virtue of mesoscopic computer modelling, accompanied by doping with a single solvent, doping with a binary solvent, and those solvent environments together with the introduction of confinement defined by various acting distances and influencing regions. A cylindrical micellar structure is maintained, as it is in the thin film with the doping of either 10% hydrophobic solvent or 10% hydrophilic solvent, whose structure consists of the hydrophobic core and hydrophilic shell. Attributed to the hydrophobicity/hydrophilia nature of the solvents, different solvents play an obvious role on the self-assembled structure, i.e., the hydrophobic solvent presents as a swelling effect, conversely, the hydrophilic solvent presents as a shrinking effect. Further, the synergistic effect of the binary solvents on the self-assembly produces the lowest values in both the average volumetric size and free energy density when the quantity of hydrophobic solvent and hydrophilic solvent is equivalent. Interestingly, the solvent effect becomes more pronounced under the existent of a confinement. When a lateral-oriented confinement is introduced, a periodically fluctuating change in the cylindrical size occurs in two near-wall regions, but the further addition of either hydrophobic or hydrophilic solvent can effectively eliminate such resulting hierarchical-sized cylinders and generate uniform small-sized cylinders. However, with the introduction of a horizontal-orientated confinement, the copolymers self-assemble into the spherical micellar structure. Moreover, the further addition of hydrophobic solvent leads to a decrease in the average size of micelles via coalescence mechanism, in contrast, the further addition of hydrophilic solvent causes an increase in the average size of micelles via splitting mechanism. These findings enrich our knowledge of the potential for the solvent effect on the self-assembly of amphiphilic copolymer system, and then provide theoretical supports on improving and regulating the mesoscopic structure of nanomaterials.

Kinetically Controlled Self-Assembly of Block Copolymers into Segmented Wormlike Micelles in Microfluidic Chips

Kinetically controlled self-assembly of block copolymers (BCPs) in solution is an efficient route to fabricate complex hierarchical colloids which are of great importance for nanoencapsulation, microreactors, and biomimics. Herein, segmented wormlike micelles (SWMs) with controllable size are generated by the self-assembly of polystyrene- block-poly(4-vinyl pyridine) in microfluidic channel. Different from the assembly of BCPs off-chip at the same solution properties, it is found that the fabricated SWMs are kinetically controlled assemblies with thermodynamic metastable structures, which are formed by the orderly aggregation of preformed spherical micelles because of the fast mixing process in microfluidic channels. Moreover, by manipulating the total flow velocity of water and BCPs solution or their flow velocity ratio, both of the percentages of SWMs among the whole assemblies and their sizes can be effectively tuned. On the basis of electron microscopy and dynamic light scatting investigations, a product diagram of micellar morphologies associated to initial polymer concentration and flow velocity ratio of water/BCPs solution was constructed, which is important for the rational design and fabrication of complex hierarchical BCP colloids.

Conditions for multicompartment polymeric tadpoles via temperature directed self-assembly

Conditions to form well-defined polymeric tadpole nanostructures.

Controlling Multicompartment Morphologies Using Solvent Conditions and Chemical Modification

The solution self-assembly of amphiphilic diblock copolymers into spheres, cylinders, and vesicles (polymersomes) has been intensely studied over the past two decades, and their morphological behavior is well understood. Linear ABC triblock terpolymers with two insoluble blocks A/B, on the other hand, display a richer and more complex morphological spectrum that has been recently explored by synthetic block length variations. Here, we describe facile postpolymerization routes to tailor ABC triblock terpolymer solution morphologies by altering block solubility (solvent mixtures), blending with homopolymers, and block-selective chemical reactions. The feasibility of these processes is demonstrated on polystyrene-block-polybutadiene-block-poly(methyl methacrylate) (SBM) that assembles to patchy spherical micelles, which can be modified to evolve into double and triple helices or patchy and striped vesicles. These results demonstrate that postpolymerization treatments give access to a broad range of morphologies from single triblock terpolymers without the need for multiple polymer syntheses.

Template-Free Bottom-Up Method for Fabricating Diblock Copolymer Patchy Particles

Patchy particles are one of most important building blocks for hierarchical structures because of the discrete patches on their surface. We have demonstrated a convenient, simple, and scalable bottom-up method for fabricating diblock copolymer patchy particles through both experiments and dissipative particle dynamics (DPD) simulations. The experimental method simply involves reducing the solvent quality of the diblock copolymer solution by the slow addition of a nonsolvent. Specifically, the fabrication of diblock copolymer patchy particles begins with a crew-cut soft-core micelle, where the micelle core is significantly swelled by the solvent. With water addition at an extremely slow rate, the crew-cut soft-core micelles first form a larger crew-cut micelle. With further water addition, the corona-forming blocks of the crew-cut micelles begin to aggregate and eventually form well-defined patches. Both experiments and DPD simulations indicate that the number of patches has a very strong dependence on the diblock copolymer composition-the particle has more patches on the surface with a lower volume fraction of patch-forming blocks. Furthermore, particles with more patches have a greater ability to assemble, and particles with fewer patches have a greater ability to merge once assembled.

Self-assembly of ABC triblock copolymers under 3D soft confinement: a Monte Carlo study

Under three-dimensional (3D) soft confinement, block copolymers can self-assemble into unique nanostructures that cannot be fabricated in an un-confined space. Linear ABC triblock copolymers containing three chemically distinct polymer blocks possess relatively complex chain architecture, which can be a promising candidate for the 3D confined self-assembly. In the current study, the Monte Carlo technique was applied in a lattice model to study the self-assembly of ABC triblock copolymers under 3D soft confinement, which corresponds to the self-assembly of block copolymers confined in emulsion droplets. We demonstrated how to create various nanostructures by tuning the symmetry of ABC triblock copolymers, the incompatibilities between different block types, and solvent properties. Besides common pupa-like and bud-like nanostructures, our simulations predicted various unique self-assembled nanostructures, including a striped-pattern nanoparticle with intertwined A-cages and C-cages, a pyramid-like nanoparticle with four Janus B-C lamellae adhered onto its four surfaces, an ellipsoidal nanoparticle with a dumbbell-like A-core and two Janus B-C lamellae and a Janus B-C ring surrounding the A-core, a spherical nanoparticle with a A-core and a helical Janus B-C stripe around the A-core, a cubic nanoparticle with a cube-shape A-core and six Janus B-C lamellae adhered onto the surfaces of the A-cube, and a spherical nanoparticle with helical A, B and C structures, from the 3D confined self-assembly of ABC triblock copolymers. Moreover, the formation mechanisms of some typical nanostructures were also examined by the variations of the contact numbers with time and a series of snapshots at different Monte Carlo times. It is found that ABC triblock copolymers usually aggregate into a loose aggregate at first, and then the microphase separation between A, B and C blocks occurs, resulting in the formation of various nanostructures.

Amphiphilic functional block copolymers bearing a reactive furfuryl group via RAFT polymerization; reversible core cross-linked micelles via a Diels–Alder “click reaction”

Amphiphilic BCPs, PFMA-b-PPEGMA were prepared via RAFT polymerization. They were self-assembled into micelles in aqueous medium with a hydrophobic PFMA core and hydrophilic PPEGMA corona. Core cross-linked micelles were prepared via the DA reaction.

Synthesis and Self-Assembly of Amphiphilic Triblock Terpolymers with Complex Macromolecular Architecture

Two star triblock terpolymers (PS-b-P2VP-b-PEO)₃ and one dendritic-like terpolymer [PS-b-P2VP-b-(PEO)₂]₃ of PS (polystyrene), P2VP (poly(2-vinylpyridine)), and PEO (poly(ethylene oxide)), never reported before, were synthesized by combining atom transfer radical and anionic polymerizations. The synthesis involves the transformation of the -Br groups of the previously reported Br-terminated 3-arm star diblock copolymers to one or two -OH groups, followed by anionic polymerization of ethylene oxide to afford the star or dendritic structure, respectively. The well-defined structure of the terpolymers was confirmed by static light scattering, size exclusion chromatography, and NMR spectroscopy. The self-assembly in solution and the morphology in bulk of the terpolymers, studied by dynamic light scattering and transmission electron microscopy, respectively, reveal new insights in the phase separation of these materials with complex macromolecular architecture.

Self-assembly concepts for multicompartment nanostructures

Compartmentalization is ubiquitous to many biological and artificial systems, be it for the separate storage of incompatible matter or to isolate transport processes. Advancements in the synthesis of sequential block copolymers offer a variety of tools to replicate natural design principles with tailor-made soft matter for the precise spatial separation of functionalities on multiple length scales. Here, we review recent trends in the self-assembly of amphiphilic block copolymers to multicompartment nanostructures (MCNs) under (semi-)dilute conditions, with special emphasis on ABC triblock terpolymers. The intrinsic immiscibility of connected blocks induces short-range repulsion into discrete nano-domains stabilized by a third, soluble block or molecular additive. Polymer blocks can be synthesized from an arsenal of functional monomers directing self-assembly through packing frustration or response to various fields. The mobility in solution further allows the manipulation of self-assembly processes into specific directions by clever choice of environmental conditions. This review focuses on practical concepts that direct self-assembly into predictable nanostructures, while narrowing particle dispersity with respect to size, shape and internal morphology. The growing understanding of underlying self-assembly mechanisms expands the number of experimental concepts providing the means to target and manipulate progressively complex superstructures.

Highly trans-1,4-stereoselective coordination chain transfer polymerization of 1,3-butadiene and copolymerization with cyclic esters by a neodymium-based catalyst system

Highly trans-1,4-stereoregular polybutadiene (TPB) was obtained by CCTP and novel amphiphilic copolymers (TPB-b-PCL/PLA) were successfully synthesized.

Self-assemblies of the six-armed star triblock ABC copolymer: pH-tunable morphologies and drug release

A well-defined six-armed star triblock copolymer s-(PDEA₆₂-b-PMMA₁₉₅-b-PPEGMA₄₇)₆ was synthesized by the core-first ATRP method. The star triblock copolymer shows pH-tunable self-assembly behavior. Interestingly, the reversible vesicle–micelle transition could be achieved by simply adjusting the surrounding pH.

Preparation of cylindrical multi-compartment micelles by the hierarchical self-assembly of ABC triblock polymer in solution

Amphiphilic linear ABC triblock copolymer PnBA₂₈-b-PS₃₇-b-P2VP₇₃ was prepared by the RAFT method. Spherical patchy micelles and cylindrical MCMs were formed in different steps of its two-step hierarchical self-assembly in selected solvents.

Counterion-mediated hierarchical self-assembly of an ABC miktoarm star terpolymer

Directed self-assembly processes of polymeric systems represent a powerful approach for the generation of structural hierarchy in analogy to biological systems. Herein, we utilize triiodide as a strongly polarizable counterion to induce hierarchical self-assembly of an ABC miktoarm star terpolymer comprising a polybutadiene (PB), a poly(tert-butyl methacrylate) (PtBMA), and a poly(N-methyl-2-vinylpyridinium) (P2VPq) segment. Hereby, the miktoarm architecture in conjunction with an increasing ratio of triiodide versus iodide counterions allows for a stepwise assembly of spherical micelles as initial building blocks into cylindrical structures and superstructures thereof. Finally, micrometer-sized multicompartment particles with a periodic lamellar fine structure are observed, for which we introduce the term "woodlouse". The counterion-mediated decrease in hydrophilicity of the corona-forming P2VPq block is the underlying trigger to induce this hierarchical structure formation. All individual steps and the corresponding intermediates toward these well-defined superstructures were intensively studied by scattering and electron microscopic techniques, including transmission electron microtomography.

Highly symmetric patchy multicompartment nanoparticles from the self-assembly of ABC linear terpolymers in C-selective solvents

Multicompartment micelles, especially those with highly symmetric surfaces such as patchy-like, patchy, and Janus micelles, have tremendous potential as building blocks of hierarchical multifunctional nanomaterials. One of the most versatile and powerful methods to obtain patchy multicompartment micelles is by the solution-state self-assembly of linear triblock copolymers. In this article, we applied the simulated annealing method to study the self-assembly of ABC linear terpolymers in C-selective solvents. Simulations predict a variety of patchy and patchy-like multicompartment micelles with high symmetry and also yield a detailed phase diagram to reveal how to control the patchy multicompartment micelle morphologies precisely. The phase diagram demonstrates that the internal segregated micellar structure depends on the ratio between the volume fractions of the two solvophobic blocks and their incompatibility, whereas the overall micellar shape depends on the copolymer concentration. The relationship between the interfacial energy, stretching energy of chains and the micellar morphology, micellar morphological transition are elucidated by computing the average contact number among the species, the mean square end-to-end distances of the whole terpolymers, the AB blocks in the terpolymers, the AB diblock copolymers, and angle distribution of terpolymers. The anchoring effect of the solvophilic C block on micellar structures is also examined by comparing the morphologies formed from ABC terpolymers and AB diblock copolymers.