Effect of Catalyst Deactivation on Polymerization of Electrolytes by Surface-Confined Atom Transfer Radical Polymerization in Aqueous Solutions

Progress in the Free and Controlled Radical Homo- and Co-Polymerization of Itaconic Acid Derivatives: Toward Functional Polymers with Controlled Molar Mass Distribution and Architecture

Polymeric derivatives of itaconic acid are becoming increasingly more interesting for research and industry because itaconic acid is accessible from renewable resources. In spite of the structural similarity of poly(itaconic acid derivatives) to poly(methacrylates), they are much less reactive, homopolymerize only sluggishly by free radical polymerization (FRP), and are often obtained with low molar masses and conversions. This has so far limited their use. The reasons for the low reactivity of itaconic acid derivatives (including itaconimides, diitaconates, and diitaconamides) are combined steric and electronic effects, as demonstrated by the body of literature on the FRP homopolymerization kinetics of these monomers which is summarized herein. These problems can be solved to a large extent by using controlled radical polymerization (CRP) techniques, notably atom transfer radical polymerization (ATRP) and reversible addition and fragmentation chain transfer radical polymerization (RAFT). By optimizing the reaction conditions for the ATRP and RAFT of itaconic acid derivatives, in particular the reaction temperature, linear relations between molar mass and conversion are obtained in many cases, and homopolymers with high molar masses and reasonably narrow polydispersity indices become accessible. This review presents the state-of-the-art FRP and CRP of itaconic acid derivatives, and highlights functional polymers obtained by these methods.

ARGET-ATRP synthesis and swelling response of compositionally varied poly(methacrylic acid-co-N,N-diethylaminoethyl methacrylate) polyampholyte brushes

Modifying the composition of polyampholytes, which are comprised of charge-positive and charge-negative repeat units, directly contributes to trade-offs between charge and structure, which are externally regulated by solution pH and added salt. Here, the relative ratio of anionic and cationic comonomers is varied to tailor the stimuli-responsiveness of poly(methacrylic acid-co-N,N-diethylaminoethyl methacrylate) (P(MAA-co-DEAEMA)) brushes to changes in solution pH and an added zwitterion. These systems display a strong dependence on excess repeating units of either type and the random incorporation appears to facilitate self-neutralization of charges. Pseudo-living growth with smooth comonomer incorporation is achieved using activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP), creating well-defined brushes. In situ ellipsometry measurements of solvated brush thickness indicate that at low and high pH, the brushes display polyelectrolyte behavior with a strong compositional dependence, but at intermediate pH values, the brushes show the characteristic collapse attributed to self-neutralization of polyampholytes. The polyampholyte brushes maintain these patterns of behavior across all compositions and in the presence of an added zwitterion, which contributes additional hydrophobic character as evidenced by decreases in the swollen layer thicknesses. The response of the P(MAA-co-DEAEMA) brushes to the organic osmolyte betaine is consistent with its tendency to stabilize proteins and peptides in a kosmotropic fashion. These studies add perspective to efforts to manipulate sequence in polyampholytic polymers, support broader efforts to tailor interfacial soft films for applications in biotechnology and sensing, and understand aggregation and stability of biological polymers.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.

Protein adsorption by a high-capacity cation-exchange membrane prepared via surface-initiated atom transfer radical polymerization

A weak cation-exchange membrane was prepared via surface-initiated atom transfer radical polymerization of glycidyl methacrylate and subsequent two-step derivation, and then two new parameters were used to explain the protein adsorption behavior.

Synthesis and Biomedical Applications of Poly((meth)acrylic acid) Brushes

Poly((meth)acrylic acid) (P(M)AA) brushes possess a number of distinctive properties that are particularly attractive for biomedical applications. This minireview summarizes recent advances in the synthesis and biomedical applications of P(M)AA brushes and brushes containing P(M)AA segments. First, we review different surface-initiated polymerization (SIP) methods, with a focus on recent progress in the surface-initiated controlled/living radical polymerization (SI-CLRP) techniques used to generate P(M)AA brushes with a tailored structure. Next, we discuss biomolecule immobilization methods for P(M)AA brushes, including physical adsorption, covalent binding, and affinity interactions. Finally, typical biomedical applications of P(M)AA brushes are reviewed, and their performance is discussed based on their unique properties. We conclude that P(M)AA brushes are promising biomaterials, and more potential biomedical applications are expected to emerge with the further development of synthetic techniques and increased understanding of their interactions with biological systems.

Janus magnetic nanoparticles with a bicompartmental polymer brush prepared using electrostatic adsorption to facilitate toposelective surface-initiated ATRP

Utilizing the inherent negative charge of mica surfaces, amine-functionalized magnetic nanoparticles (Fe3O4/NH2) were electrostatically adsorbed onto the mica such that surface-initiated ATRP could be used to grow poly(n-isopropylacrylamide) (PNIPAM) from the exposed hemisphere. By reducing the solution pH, a positive charge generated on the mica was used to release the nanoparticles from the substrate. A second ATRP reaction was carried out to grow poly(methacrylic acid) (PMAA) from the initiated surfaces. As a result, the Fe3O4/NH2 core has a polymer shell with one hemisphere PMAA and the other hemisphere PNIPAM-b-PMAA resulting in the PMAA-Fe3O4-PNIPAM-b-PMAA bicompartmental polymer Janus nanoparticles. Elemental and functional group compositions were confirmed using ATR-FTIR, XPS, and EDS. Imaging with AFM, SEM, and TEM showed the evolution of the Janus nanoparticle morphology. This study demonstrates a facile and innovative scheme involving a noncovalent solid protection technique combined with sequential, surface-confined controlled radical polymerizations for the production of multicomponent nanocomposites.

Control of lysozyme adsorption by pH on surfaces modified with polyampholyte brushes

The adsorption of lysozyme is difficult to control by pH because of the relatively high isoelectric point of this protein (11.1). In this article, we demonstrate good control of lysozyme adsorption by pH in the range of 4-10 on silicon surfaces through modification with poly(2-(dimethylamino ethyl) methacrylate)-block-poly(methacrylic acid) (PDMAEMA-b-PMAA) diblock copolymer brushes. We show that the thickness of the outer PMAA block (lPMAA) is critical to the adsorption. When lPMAA was less than 10 nm, adsorption increased with increasing pH, and the difference in adsorption between high and low pH increased with lPMAA. The ratio of adsorption at pH 10 and pH 4 reached values as high as 16.4. When lPMAA was more than 10 nm, the adsorption tendency on the PDMAEMA-b-PMAA diblock copolymer brushes was similar to that on PMAA homopolymer brushes. These results indicate that the combination of PDMAEMA and PMAA gives adsorption behavior reflecting the properties of both polymers. However, if the outer PMAA block is thicker than a critical value, then the protein-resistant effect of the inner PDMAEMA block is screened.

Combination of episulfide ring-opening polymerization with ATRP for the preparation of amphiphilic block copolymers

We report for the first time the combination of ATRP and ring-opening episulfide polymerization as a means to synthesize polysulfide-based low-dispersity amphiphilic block copolymers. The most significant finding is the possibility to perform ATRP under mild conditions using poly(propylene sulfide) macroinitiators, apparently without any significant copper sequestration by the polysulfides. Using glycerol monomethacrylate (GMMA) as a hydrophilic monomer, the polymers self-assembled in colloidal structures with a morphology depending on the PS/GMMA ratio, but also probably on GMMA degree of polymerization. We here also present a new AFM-based method to calculate the average number of amphiphilic macromolecules per micelle.

Ion-specific conformational behavior of polyzwitterionic brushes: exploiting it for protein adsorption/desorption control

The conformation of polyzwitterionic brushes plays a crucial role in the adsorption/desorption of proteins on solid surfaces. By use of quartz crystal microbalance with dissipation (QCM-D) and surface plasmon resonance (SPR), we have systematically investigated the conformational behavior of poly(sulfobetaine methacrylate) (PSBMA) brushes as a function of ionic strength in the presence of different ions. The frequency change demonstrates that the effectiveness of anions to weaken the inter/intrachain association and to enhance the hydration of the grafted chains increases from kosmotrope to chaotrope in the low ionic strength regime, but the ordering of anions is almost reversed at the high ionic strengths. The dissipation change indicates that some heterogeneous structures are formed inside the brushes in the presence of chaotropic anions with the increase of ionic strength. In SPR studies, the change of resonance unit (ΔRU) with ionic strength is determined by the balance between the increase of thickness and the decrease of refractive index of the brushes. No anion specificity is observed in the SPR measurements because ΔRU is insensitive to the coupled water molecules inside the brushes. For the control of protein adsorption/desorption, our studies show that the brushes can more effectively resist the protein adsorption in the presence of a more chaotropic anion and a more chaotropic anion can also more effectively induce the protein desorption from the surface of the brushes. In addition, no obvious cation specificity can be observed in the conformational change of the brushes in either QCM-D or SPR measurements.

Nanostructured composites obtained by ATRP sleeving of bacterial cellulose nanofibers with acrylate polymers

Novel nanostructured composite materials based on bacterial cellulose membranes (BC) and acrylate polymers were prepared by in situ atom transfer radical polymerization (ATRP). BC membranes were functionalized with initiating sites, by reaction with 2-bromoisobutyryl bromide (BiBBr), followed by atom transfer radical polymerization of methyl methacrylate (MMA) and n-butyl acrylate (BA), catalyzed by copper(I) bromide and N,N,N',N″,N″-pentamethyldiethylenetriamine (PMDETA), using two distinct initiator amounts and monomer feeds. The living characteristic of the system was proven by the growth of PBA block from the BC-g-PMMA membrane. The BC nanofiber sleeving was clearly demonstrated by SEM imaging, and its extent can be tuned by controlling the amount of initiating sites and the monomer feed. The ensuing nanocomposites showed high hydrophobicity (contact angles with water up to 134°), good thermal stability (initial degradation temperature in the range 241-275 °C), and were more flexible that the unmodified BC membranes.

Formation of polyampholyte brushes via controlled radical polymerization and their assembly in solution

We describe the formation of polyampholytic block copolymer brushes and their assembly in solution. Specifically, we employ "surface-initiated" activators regenerated by electron transfer atom transfer radical polymerization (ARGET-ATRP) sequentially to form diblock copolymer grafts comprising blocks of poly[2-(dimethylamino)ethyl methacrylate] (PDMAEMA) and poly(sodium methacrylate) (PNaMA) on flat impenetrable silica surfaces, i.e., SiO(x)/PNaMA-b-PDMAEMA and SiO(x)/PDMAEMA-b-PNaMA. Protonation of the PNaMA block results in formation of poly(methacrylic acid) (PMAA). We demonstrate that ARGET-ATRP of NaMA provides a convenient route to preparation of PMAA, which is an alternative method to the more traditional approach based on preparing PMAA by polymerizing tert-butyl methacrylate (tBMA) followed by cleavage of the tert-butyl group. We also discuss conformational changes of the individual polyelectrolyte blocks in solution as a function of solution pH by monitoring adsorption behavior of functionalized polystyrene spheres.

Preparation of hydrophilic polymer-grafted polystyrene beads for hydrophilic interaction chromatography via surface-initiated atom transfer radical polymerization

A one-step procedure based on surface-initiated atom transfer radical polymerization (SI-ATRP) to hydrophilize monodisperse poly(chloromethylstyrene-co-divinylbenzene) beads has been presented in this work, using 2-hydroxyl-3-[4-(hydroxymethyl)-1H-1,2,3-triazol-1-yl]propyl 2-methylacrylate (HTMA) as a monomer. The chain length of the grafted poly(HTMA) was controlled via varying the ratio of HTMA to initiator on the surface of the beads. When using the grafted beads as a stationary phase in hydrophilic interaction chromatography (HILIC), good resolution for nucleobases/nucleosides was obtained with acetonitrile aqueous solution as an eluent; while for phenolic acids and glycosides, they could be eluted and separated in the presence of TFA. The retention time of the solutes increased with the amount of the grafted HTMA. The retention mechanisms of solutes were investigated by the effects of mobile phase composition and buffer pH on the retention of solutes. The results illustrated that the retention behaviors of the tested solutes were dominated by hydrogen bonding interaction and electrostatic interaction. From the chemical structure of the ligands, the modified beads could not only be used as a stationary phase in HILIC, but also act as a useful building block to develop new stationary phases for other chromatographic modes such as affinity media.

Synthesis and swelling behavior of pH-responsive polybase brushes

We synthesize polybase brushes and investigate their swelling behavior. Poly(2-(dimethylamino)ethyl methacrylate)) (PDMAEMA) brushes are prepared by the "grafting from" method using surface-initiated Atom Transfer Radical Polymerization to obtain dense brushes with relatively monodisperse chains (PDI = 1.35). In situ quaternization reaction can be performed to obtain poly(2-(trimethylamino)ethyl methacrylate)) (PTMAEMA) brushes. We determine the swollen thickness of the brushes using ellipsometry and neutron reflectivity techniques. Brushes are submitted to different solvent conditions to be investigated as neutral brushes and weak and strong polyelectrolyte brushes. The swelling of the brushes is systematically compared to scaling models. It should be pointed out that the scaling analysis of different types of brushes (neutral polymer and weak and strong polyelectrolyte brushes) is performed with identical samples. The scaling behavior of the PDMAEMA brush in methanol and the PTMAEMA brush in water is in good agreement with the predicted scaling laws for a neutral polymer brush in a good solvent and a polyelectrolyte brush in the osmotic regime. The salt-induced contraction of the quaternized brush is observed for high salt concentration, in agreement with the predicted transition between the regimes of the osmotic brush and the salted brush. From the crossover concentration, we calculate the effective charge ratio of the brush following the Manning counterion condensation. We also use PDMAEMA brushes as pH-responsive polybase brushes. The swelling behavior of the polybase brush is intermediate with respect to the behavior of the neutral polymer brush in a good solvent and the behavior of the quenched polyelectrolyte brush, as expected. The effective charge ratio of the PDMAEMA brush is determined as a function of pH using the scaling law of the polyelectrolyte brush in the osmotic regime.

Adsorption of dansylated amino acids on molecularly imprinted surfaces: A surface plasmon resonance study

Surface plasmon resonance spectroscopy (SPR) was used to measure the adsorption kinetics and isotherms of dansylated amino acids onto surface-confined molecularly imprinted polymer films (MIP-Fs) and the corresponding non-imprinted polymer control films (NIP-Fs). The surface-confined polymer films were grafted from flat gold surfaces using atom transfer radical polymerization (ATRP). This approach allowed uniform nanothin films to be grown, thereby ensuring that the amino acids see a uniform surface during adsorption. N,N'-Didansyl-l-cystine (DDC) and didansyl-l-lysine (DDK) were used as the template molecules to form the MIP-Fs. Adsorption kinetics data were analyzed using single- and dual-site Langmuir adsorption models. It was found that, within the experimental measurement range, adsorption isotherm data were well described by any of four isotherm models: Langmuir, dual-site Langmuir, Freundlich, or Langmuir-Freundlich (LF). The relatively high heterogeneity index values regressed using the Freundlich and LF isotherms suggest the formation of fairly homogeneous MIP-Fs; although Scatchard analysis reveals binding site heterogeneity does exist. Selectivity studies showed that the MIP-Fs display cross-reactivity between DDC and DDK; nevertheless, MIP-Fs prepared against one template showed selectivity for that template. Solution pH and polymer layer thickness were studied as independent parameters to determine their impacts on amino acid adsorption, as monitored by SPR.