Synthesis and Self-Assembly of Poly(ferrocenyldimethylsilane-b-2-vinylpyridine) Diblock Copolymers

Role of Competitive Crystallization Kinetics in the Formation of 2D Platelets with Distinct Coronal Surface Patterns via Seeded Growth

Low dispersity 2D platelet micelles with controllable surface patterns were prepared by seeded-growth/living crystallization-driven self-assembly (CDSA) of block copolymer/homopolymer (BCP/HP) blends of poly(ferrocenyldimethylsilane)-b-poly(2-vinyl pyridine) (PFS-b-P2VP) and PFS. The precise morphology was found to be dependent on the proportion of the P2VP corona block, which can be efficiently controlled by changing the molar concentration ratio of PFS-b-P2VP/PFS, (c_B/c_H)_t, as well as their relative rates of crystallization, (G_B/G_H)_t. In the case where their molar concentration ratio was comparable to their crystallization rate ratio, platelets with a uniform distribution of P2VP coronal chains were formed. In other cases, as the concentration ratio increased (or decreased) during the living CDSA process, hierarchical structures were formed, including chain-like assemblies consisting of end-to-end linked rectangular platelets and fusiform (tapered) micelles. (G_B/G_H)_t was adjusted by tuning the degree of polymerization of the crystallizable PFS core-forming block and the BCP block ratio and by varying the terminus of the HP or changing the solvent used. Furthermore, the open edge of the platelets remained active for further growth, which permitted control of the morphology and dimensions of the platelets. Interestingly, in cases where the molar concentration ratio was lower than the crystallization rate ratio, growth rings were observed after two or more living CDSA steps. This study on the formation of platelet micelles by living CDSA of BCP/HP blends under kinetic control offers a considerable scope for the design of 2D polymer nanomaterials with controlled shape and surface patterns.

Dimension control on self-assembly of a crystalline core-forming polypeptoid block copolymer: 1D nanofibers versus 2D nanosheets

The balance between the crystallization and solubility of the block copolymer dominates the nanostructures.

Towards scalable, low dispersity, and dimensionally tunable 2D platelets using living crystallization-driven self-assembly

Scalable low dispersity platelets were accessed through the self-assembly of crystallizable charge-terminated PFS homopolymers. The use of surfactant counteranions, as well as increasing the self-assembly temperature, improved structure fidelity.

Morphological modulation of azobenzene-containing tubular polymersomes

Several external factors influencing the formation and morphologic transition of tubular vesicles were carefully investigated, including the initial polymer concentration, solvent, temperature, water adding rate, and light irradiation.

Surface Patterning of Uniform 2D Platelet Block Comicelles via Coronal Chain Collapse

The formation of colloids with anisotropically patterned surfaces is of growing interest for the creation of hierarchical structures and the templating of nanoparticles. We have recently shown that well-defined two-dimensional platelets with low areal dispersities can be formed by the seeded growth of a blend of homopolymers and block copolymers. Herein we form rectangular platelets containing two block copolymers with different coronal chemistries. On addition of a solvent that is only able to solvate the corona of one block, we were able to form colloidally stable micelles with patterned surfaces via coronal collapse. Scanning transmission electron microscopy-energy-dispersive X-ray spectroscopy and atomic force microscopy were employed to provide information on the structure and size of the patches decorating the micelle surfaces.

Tailored multifunctional micellar brushes via crystallization-driven growth from a surface

The creation of nanostructures with precise chemistries on material surfaces is of importance in a wide variety of areas such as lithography, superhydrophobicity, and cell adhesion. We describe a platform for surface functionalization that involves the fabrication of cylindrical micellar brushes on a silicon wafer through seeded growth of crystallizable block copolymers at the termini of immobilized, surface-confined crystallite seeds. The density, length, and coronal chemistry of the micellar brushes can be precisely tuned, and post-growth decoration with nanoparticles enables applications in catalysis and antibacterial surface modification. The micellar brushes can also be grown on ultrathin two-dimensional materials such as graphene oxide nanosheets and further assembled into a membrane for the separation of oil-in-water emulsions and gold nanoparticles.

Functional Metalloblock Copolymers for the Preparation and In Situ Functionalization of Porous Silica Films

Stimuli-responsive mesoporous silica films were prepared by evaporation-induced self-assembly through the physical entrapment of a functional metalloblock copolymer structuring agent, which simultaneously served to functionalize the mesopore. After end-functionalization with a silane group, the applied functional metalloblock copolymers were covalently integrated into the silica mesopore wall. In addition, they were partly degraded after the formation of the mesoporous film, which enabled the precise design of accessible mesopores. These polymer-silica hybrid materials exhibited remarkable and gating ionic permselectivity and offer the potential for highly precise pore filling design and combination with high-throughput printing techniques. This in situ functionalization strategy of mesoporous silica using responsive metalloblock copolymers has the potential to improve how we approach the design of complex architectures at the nanoscale for tailored transport. This functionalization strategy paves the way for a variety of technologies based on molecular transport in nanoscale pores, including separation, sensing, catalysis, and energy conversion.

Surface-Conformal Triboelectric Nanopores via Supramolecular Ternary Polymer Assembly

A triboelectric nanogenerator (TENG) is of tremendous interest owing to its high energy efficiency with a simple device architecture and applicability to various materials. Most previous topological surface modifications introduced for further improving the performance of a TENG are detrimental because they require expensive and/or harsh (e.g., high temperature and acidity) postetching processes, which limit the material choice and design of its components. Herein, we demonstrate an one-step route for developing rapid wet-processable surface-conformal triboelectric nanoporous films (STENFs). Our method is based on a simple supramolecular assembly of a ternary polymer blend suitable for various conventional solution processes such as spin-, bar-, spray-, and dip-coating. The one-step wet process of a ternary solution produces thin large-area films in which self-assembled, ordered nanopores of approximately 33 nm in diameter are developed even without an additional etching process. The study reveals that the small amount of amine-terminated poly(ethylene oxide) added to the binary blend of sulfonic-acid-terminated poly(styrene) and poly(2-vinylpyridine) efficiently activates the formation of spontaneous nanopores as a pore-generating agent. Our STENF significantly enhances the open-circuit voltage up to 1.5 times higher than that of a planar one, leading to an improved power density of approximately 77 μW/cm². The suitability for diverse conventional coating processes offers a convenient approach for fabricating high-performance STENFs not only on flat substrates such as metals, polymers, and oxides but also on topological ones including wrinkled, roughened surfaces, textile fibers, natural leaves, and fabrics over a large area.

Extending the Scope of "Living" Crystallization-Driven Self-Assembly: Well-Defined 1D Micelles and Block Comicelles from Crystallizable Polycarbonate Block Copolymers

Fiber-like block copolymer (BCP) micelles offer considerable potential for a variety of applications; however, uniform samples of controlled length and with spatially tailored chemistry have not been accessible. Recently, a seeded growth method, termed "living" crystallization-driven self-assembly (CDSA), has been developed to allow the formation of 1D micelles and block comicelles of precisely controlled dimensions from BCPs with a crystallizable segment. An expansion of the range of core-forming blocks that participate in living CDSA is necessary for this technique to be compatible with a broad range of applications. Few examples currently exist of well-defined, water-dispersible BCP micelles prepared using this approach, especially from biocompatible and biodegradable polymers. Herein, we demonstrate that BCPs containing a crystallizable polycarbonate, poly(spiro[fluorene-9,5'-[1,3]-dioxan]-2'-one) (PFTMC), can readily undergo living CDSA processes. PFTMC- b-poly(ethylene glycol) (PEG) BCPs with PFTMC:PEG block ratios of 1:11 and 1:25 were shown to undergo living CDSA to form near monodisperse fiber-like micelles of precisely controlled lengths of up to ∼1.6 μm. Detailed structural characterization of these micelles by TEM, AFM, SAXS, and WAXS revealed that they comprise a crystalline, chain-folded PFTMC core with a rectangular cross-section that is surrounded by a solvent swollen PEG corona. PFTMC- b-PEG fiber-like micelles were shown to be dispersible in water to give colloidally stable solutions. This allowed an assessment of the toxicity of these structures toward WI-38 and HeLa cells. From these experiments, we observed no discernible cytotoxicity from a sample of 119 nm fiber-like micelles to either healthy (WI-38) or cancerous (HeLa) cell types. The living CDSA process was extended to PFTMC- b-poly(2-vinylpyridine) (P2VP), and addition of this BCP to PFTMC- b-PEG seed micelles led to the formation of well-defined segmented fibers with spatially localized coronal chemistries.

Hierarchical Self-Assembly of Toroidal Micelles into Multidimensional Nanoporous Superstructures

Materials with controlled porosity play a prominent role in industrial and domestic applications. Although a rich array of methods has been developed to tune the pore size over a broad range (from <1 nm to >1 μm), the fabrication of functional materials with a fully open porous structure with sub-100 nm pore size has remained a significant challenge. Herein, we report the hierarchical assembly of block copolymer toroidal micelles with an intrinsic cavity into multidimensional nanoporous superstructures (pore size 85-90 nm) by modulation of interparticle interactions. The toroids aggregate into oligo-supermicelles or 2D hexagonal arrays through van der Waals interactions upon drying on a substrate, while synergistic hydrogen bonding interactions further promote the formation of 3D nanoporous superstructures directly in solution. Thus, toroidal micelles can be manipulated as a type of distinctive building block to construct nanoporous materials.

Synthesis, thin-film self-assembly, and pyrolysis of ruthenium-containing polyferrocenylsilane block copolymers

The self-assembly of a ruthenium-containing polyferrocenylsilane in bulk and thin films yielded spherical or cylindrical domains in a PS matrix; pyrolysis provided a route to bimetallic Fe/Ru NPs for potential catalytic applications.

Two-dimensional assemblies from crystallizable homopolymers with charged termini

The creation of shaped, uniform and colloidally stable two-dimensional (2D) assemblies by bottom-up methods represents a challenge of widespread current interest for a variety of applications. Herein, we describe the utilization of surface charge to stabilize self-assembled planar structures that are formed from crystallizable polymer precursors by a seeded growth approach. Addition of crystallizable homopolymers with charged end-groups to seeds generated by the sonication of block copolymer micelles with crystalline cores yields uniform platelet micelles with controlled dimensions. Significantly, the seeded growth approach is characterized by a morphological memory effect whereby the origin of the seed, which can involve a quasi-hexagonal or rectangular 2D platelet precursor, dictates the observed 2D platelet shape. This new strategy is illustrated using two different polymer systems, and opens the door to the construction of 2D hierarchical structures with broad utility.

Surfactant-Mediated Crystallization-Driven Self-Assembly of Crystalline/Ionic Complexed Block Copolymers in Aqueous Solution

A series of crystalline/ionic complexed block copolymers (BCPs) with various compositions have been prepared by sequential reactions. The BCPs with different hydrophilic fractions can self-assemble into various morphologies, such as spindlelike, rodlike, and spherical micelles with different crystallinity of the core. Bis(2-ethylhexyl) sulfosuccinate sodium salt (AOT) is added as a surfactant to induce the morphological transition of BCPs in aqueous media. The introduced AOT can be tightly bound to the cationic units, and a water-insoluble unit in the corona forms, leading to a reduced tethering density. Consequently, morphological variety changing from rods to platelets to fibril to dendrite-like micelles can be observed.

Cooperation of Amphiphilicity and Crystallization for Regulating the Self-Assembly of Poly(ethylene glycol)-block-poly(lactic acid) Copolymers

Tuning the amphiphilicity of block copolymers has been extensively exploited to manipulate the morphological transition of aggregates. The introduction of crystallizable moieties into the amphiphilic copolymers also offers increasing possibilities for regulating self-assembled structures. In this work, we demonstrate a detailed investigation of the self-assembly behavior of amphiphilic poly(ethylene glycol)-block-poly(l-lactic acid) (PEG-b-PLLA) diblock copolymers with the assistance of a common solvent in aqueous solution. With a given length of the PEG block, the molecular weight of the PLA block has great effect on the morphologies of self-assembled nanoaggregates as a result of varying molecular amphiphilicity and polymer crystallization. Common solvents including N,N-dimethylformamide, dioxane, and tetrahydrofuran involved in the early stage of self-assembly led to the change in chain configuration, which further influences the self-assembly of block copolymers. This study expanded the scope of PLA-based copolymers and proposed a possible mechanism of the sphere-to-lozenge and platelet-to-cylinder morphological transitions.

Uniform patchy and hollow rectangular platelet micelles from crystallizable polymer blends

The preparation of colloidally stable, self-assembled materials with tailorable solid or hollow two-dimensional (2D) structures represents a major challenge. We describe the formation of uniform, monodisperse rectangular platelet micelles of controlled size by means of seeded-growth methods that involve the addition of blends of crystalline-coil block copolymers and the corresponding crystalline homopolymer to cylindrical micelle seeds. Sequential addition of different blends yields solid platelet block comicelles with concentric rectangular patches with distinct coronal chemistries. These complex nano-objects can be subject to spatially selective processing that allows their disassembly to form perforated platelets, such as well-defined hollow rectangular rings. The solid and hollow 2D micelles provide a tunable platform for further functionalization and potential for a variety of applications.

Polyferrocenylsilanes: synthesis, properties, and applications

This comprehensive review covers polyferrocenylsilanes (PFSs), a well-established, readily accessible class of main chain organosilicon metallopolymer. The focus is on the recent advances involving PFS homopolymers and block copolymers and the article covers the synthesis, properties, and applications of these fascinating materials.

Transformation and patterning of supermicelles using dynamic holographic assembly

Although the solution self-assembly of block copolymers has enabled the fabrication of a broad range of complex, functional nanostructures, their precise manipulation and patterning remain a key challenge. Here we demonstrate that spherical and linear supermicelles, supramolecular structures held together by non-covalent solvophobic and coordination interactions and formed by the hierarchical self-assembly of block copolymer micelle and block comicelle precursors, can be manipulated, transformed and patterned with mediation by dynamic holographic assembly (optical tweezers). This allows the creation of new and stable soft-matter superstructures far from equilibrium. For example, individual spherical supermicelles can be optically held in close proximity and photocrosslinked through controlled coronal chemistry to generate linear oligomeric arrays. The use of optical tweezers also enables the directed deposition and immobilization of supermicelles on surfaces, allowing the precise creation of arrays of soft-matter nano-objects with potentially diverse functionality and a range of applications.

Block copolymers can form micelles and assemblies of micelles (supermicelles) when placed in suitable solvents. Here, the authors use optical tweezers to control the arrangement and deposition of supermicelles into higher-order patterned nanostructures.

Hierarchical Polymer-Carbon Nanotube Hybrid Mesostructures by Crystallization-Driven Self-Assembly

Multistep crystallization-driven self-assembly has great potential to enable the construction of sophisticated hybrid mesostructures. During the assembly procedure, each step modifies the properties of the overall structure. Here, we demonstrate the flexibility and efficiency of this approach by preparing polymer-carbon nanotube (CNT) hybrid mesostructures. We started by growing polyferrocenyldimethylsilane (PFS) homopolymer crystals onto multiwalled CNTs. This first step facilitated the redispersion of the coated CNTs in both polar (2-propanol) and nonpolar (decane) solvents. In the second step of hybrid construction, a unimer solution of a PFS block copolymer was added into the PFS-CNT solution. The PFS coating on the CNT initiated the growth of elongated micelles, resulting in structures that resembled hairy caterpillars. PFS-b-P2VP (P2VP = poly-2-vinylpyridine) micelles were grown from the surface of PFS-CNT hybrids in 2-propanol, and PFS-b-PI (PI = polyisoprene) micelles were grown from these hybrids in decane. These micelles, by transmission electron microscopy were seen to have an unusual wavy kinked structure, very different from the uniform smooth structures normally formed by both block copolymers. For hybrids with PFS-b-PI micelles, cross-linking of the micelle coronas locked the whole structure in place and allowed us to use the partial oxidation of PFS components to grow metal nanoparticles in the core of these micelles. We finally investigated the influence of the corona-forming block used to grow the micelles on the wettability of films made from these mesostructures. Films formed with CNT hybrids grafted with PFS-b-PI micelles were superhydrophobic (contact angle, 152°). In contrast, the surface of the films was much more hydrophilic (contact angle, 54°) when they were prepared from CNT hybrids grafted with PFS-b-P2VP micelles.

Non-covalent synthesis of supermicelles with complex architectures using spatially confined hydrogen-bonding interactions

Nature uses orthogonal interactions over different length scales to construct structures with hierarchical levels of order and provides an important source of inspiration for the creation of synthetic functional materials. Here, we report the programmed assembly of monodisperse cylindrical block comicelle building blocks with crystalline cores to create supermicelles using spatially confined hydrogen-bonding interactions. We also demonstrate that it is possible to further program the self-assembly of these synthetic building blocks into structures of increased complexity by combining hydrogen-bonding interactions with segment solvophobicity. The overall approach offers an efficient, non-covalent synthesis method for the solution-phase fabrication of a range of complex and potentially functional supermicelle architectures in which the crystallization, hydrogen-bonding and solvophobic interactions are combined in an orthogonal manner.

Ubiquitous in nature, hierarchical architectures are less commonly achieved in synthetic functional materials. Here, the authors design and carefully assemble block copolymer micelles into complex supermicelles using hydrogen bonding in orthogonal combination with other non-covalent interactions.

Morphological Control of Anisotropic Self-Assemblies from Alternating Poly(p-dioxanone)-poly(ethylene glycol) Multiblock Copolymer Depending on the Combination Effect of Crystallization and Micellization

A novel and facile method was developed for morphological controlling of self-assemblies prepared by crystallization induced self-assembly of crystalline-coil copolymer depending on the combination effect of crystallization and micellization. The morphological evolution of the self-assemblies of alternating poly(p-dioxanone)-block-poly(ethylene glycol) (PPDO-PEG) multiblock copolymer prepared by different solvent mixing methods in aqueous solution were investigated. "Chrysanthemum"-like and "star anise"-like self-assemblies were obtained at different rates of solvent mixing. The results suggested gradually change in solvent quality (slowly dropping water into DMF solution) leaded to a hierarchical micellization-crystallization process of core-forming PPDO blocks, and flake-like particles were formed at the initial stage of crystallization. Meanwhile, crystallization induced micellization process occurred when solvent quality changed drastically. Shuttle-like particles, which have much smaller size than those of flake-like particles, were formed at the initial stage of crystallization when quickly injecting water into DMF solution of the copolymer. Therefore, owing to the different changing rate of solvent quality, which may result in different combination effect of crystallization and micellization during self-assembly of the copolymer, PPDO-PEG self-assemblies with different hierarchical morphology in nano scale could be obtained.

A design strategy for the hierarchical fabrication of colloidal hybrid mesostructures

Advances in nanotechnology depend upon expanding the ability to create new and complex materials with well-defined multidimensional mesoscale structures. The creation of hybrid hierarchical structures by combining colloidal organic and inorganic building blocks remains a challenge due to the difficulty in preparing organic structural units of precise size and shape. Here we describe a design strategy to generate controlled hierarchical organic-inorganic hybrid architectures by multistep bottom-up self-assembly. Starting with a suspension of large inorganic nanoparticles, we anchor uniform block copolymer crystallites onto the nanoparticle surface. These colloidally stable multi-component particles can initiate the living growth of uniform cylindrical micelles from their surface, leading to three-dimensional architectures. Structures of greater complexity can be obtained by extending the micelles via addition of a second core-crystalline block copolymer. This controlled growth of polymer micelles from the surface of inorganic particles opens the door to the construction of previously inaccessible colloidal organic-inorganic hybrid structures.

Crystallinity-driven morphological ripening processes for poly(ethylene oxide)-block-polycaprolactone micelles in water

A set of morphological transformations induced by core crystallization within spherical micelle-like aggregates of poly(ethylene oxide)-block-polycaprolactone (PEO-b-PCL) is described in the present article. The initial self-assembly step, in which individual copolymer chains associate to form the spheres, can be performed reproducibly; the stability of these spheres, however, seems to be limited, as both transmission electron microscopy and light scattering data suggest that the primary spheres transform slowly into elongated rod-like or ribbon-like aggregates when suspended in deionized water at room temperature. Although the sphere-to-rod transition takes place typically over a time scale of several days, the formation of individual rods from spheres is very rapid, as evidenced by the progressive increase in the number of long rods and the conspicuous absence of short rods.

Dimensional control of block copolymer nanofibers with a π-conjugated core: crystallization-driven solution self-assembly of amphiphilic poly(3-hexylthiophene)-b-poly(2-vinylpyridine)

With the aim of accessing colloidally stable, fiberlike, π-conjugated nanostructures of controlled length, we have studied the solution self-assembly of two asymmetric crystalline-coil, regioregular poly(3-hexylthiophene)-b-poly(2-vinylpyridine) (P3HT-b-P2VP) diblock copolymers, P3HT23-b-P2VP115 (block ratio=1:5) and P3HT44-b-P2VP115 (block ratio=ca. 1:3). The self-assembly studies were performed under a variety of solvent conditions that were selective for the P2VP block. The block copolymers were prepared by using Cu-catalyzed azide-alkyne cycloaddition reactions of azide-terminated P2VP and alkyne end-functionalized P3HT homopolymers. When the block copolymers were self-assembled in a solution of a 50% (v/v) mixture of THF (a good solvent for both blocks) and an alcohol (a selective solvent for the P2VP block) by means of the slow evaporation of the common solvent; fiberlike micelles with a P3HT core and a P2VP corona were observed by transmission electron microscopy (TEM). The average lengths of the micelles were found to increase as the length of the hydrocarbon chain increased in the P2VP-selective alcoholic solvent (MeOH<iPrOH<nBuOH). Very long (>3 μm) fiberlike micelles were prepared by the dialysis of solutions of the block copolymers in THF against iPrOH. Furthermore the widths of the fibers were dependent on the degree of polymerization of the chain-extended P3HT blocks. The crystallinity and π-conjugated nature of the P3HT core in the fiberlike micelles was confirmed by a combination of UV/Vis spectroscopy, photoluminescence (PL) measurements, and wide-angle X-ray scattering (WAXS). Intense sonication (iPrOH, 1 h, 0 °C) of the fiberlike micelles formed by P3HT23-b-P2VP115 resulted in small (ca. 25 nm long) stublike fragments that were subsequently used as initiators in seeded growth experiments. Addition of P3HT23-b-P2VP115 unimers to the seeds allowed the preparation of fiberlike micelles with narrow length distributions (L(w)/L(n) < 1.11) and lengths from about 100-300 nm, that were dependent on the unimer-to-seed micelle ratio.

Self-seeding in one dimension: a route to uniform fiber-like nanostructures from block copolymers with a crystallizable core-forming block

One-dimensional micelles formed by the self-assembly of crystalline-coil poly(ferrocenyldimethylsilane) (PFS) block copolymers exhibit self-seeding behavior when solutions of short micelle fragments are heated above a certain temperature and then cooled back to room temperature. In this process, a fraction of the fragments (the least crystalline fragments) dissolves at elevated temperature, but the dissolved polymer crystallizes onto the ends of the remaining seed fragments upon cooling. This process yields longer nanostructures (up to 1 μm) with uniform width (ca. 15 nm) and a narrow length distribution. In this paper, we describe a systematic investigation of factors that affect the self-seeding behavior of PFS block copolymer micelle fragments. For PI(1000)-PFS(50) (the subscripts refer to the number average degree of polymerization) in decane, these factors include the presence of a good solvent (THF) for PFS and the effect of annealing the fragments prior to the self-seeding experiments. THF promoted the dissolution of the micelle fragments, while preannealing improved their stability. We also extended our experiments to other PFS block copolymers with different corona-forming blocks. These included PI(637)-PFS(53) in decane, PFS(60)-PDMS(660) in decane (PDMS = polydimethylsiloxane), and PFS(30)-P2VP(300) in 2-propanol (P2VP = poly(2-vinylpyridine)). The most remarkable result of these experiments is our finding that the corona-forming chain plays an important role in affecting how the PFS chains crystallize in the core of the micelles and, subsequently, the range of temperatures over which the micelle fragments dissolve. Our results also show that self-seeding is a versatile approach to generate uniform PFS fiber-like nanostructures, and in principle, the method should be extendable to a wide variety of crystalline-coil block copolymers.

End-to-end coupling and network formation behavior of cylindrical block copolymer micelles with a crystalline polyferrocenylsilane core

Cylindrical block copolymer micelles with a crystalline poly(ferrocenyldimethylsilane) (PFDMS) core and a long corona-forming block are known to elongate through an epitaxial growth mechanism on addition of further PFDMS block copolymer unimers. We now report that addition of the semicrystalline homopolymer PFDMS(28) to monodisperse short (ca. 200 nm), cylindrical seed micelles of PFDMS block copolymers results in the formation of aggregated structures by end-to-end coupling to form micelle networks. The resulting aggregates were characterized by dynamic light scattering (DLS), transmission electron microscopy (TEM), and atomic force microscopy (AFM). In some cases, a core-thickening effect was also observed where the added homopolymer appeared to deposit and crystallize at the core-corona interface, which resulted in an increase of the width of the micelles within the networks. No evidence for aggregation was detected when the amorphous homopolymer poly(ferrocenylethylmethylsilane) (PFEMS(25)) was added to the cylindrical seed micelles whereas similar behavior to PFDMS(28) was noted for semicrystalline polyferrocenyldimethylgermane (PFDMG(30)). This suggested that the crystallinity of the added homopolymer is critical for subsequent end-to-end coupling and network formation to occur. We also explored the tendency of the cylindrical seed micelles to form aggregates by the addition of PI-b-PFDMS (PI = polyisoprene) block copolymers (block ratios 6:1, 3.8:1, 2:1, or 1:1), and striking differences were noted. The results ranged from typical micelle elongation, as reported in previous work, at high corona to core-forming block ratios (PI-b-PFDMS; 6:1) to predominantly end-to-end coupling at lower ratios (PI-b-PFDMS; 2:1, 1:1) to form long, essentially linear structures. The latter process, especially for the 2:1 block copolymer, led to much more controlled aggregate formation compared with that observed on addition of homopolymers.