Micellization Behavior of Complex Comblike Block Copolymer Architectures

Hairy Gels: A Computational Study

We present results of MD and MC simulations of the equilibrium properties of swelling gels with comb-like or bottlebrush subchains and compare them to scaling-theory predictions. In accordance with theory, the simulation results demonstrate that swelling coefficient of the gel increases as a function of the polymerization degree of the main chains and exhibits a very weak maximum (or is virtually constant) as a function of the polymerization degree and grafting density of side chains. The bulk osmotic modulus passes through a shallow minimum as the polymerization degree of the side chains increases. This minimum is attributed to the onset of overlap of side chains belonging to different bottlebrush strands in the swollen gel.

Theoretical advances in molecular bottlebrushes and comblike (co)polymers: solutions, gels, and self-assembly

We present an overview of state-of-the-art theory of (i) conformational properties of molecular bottlebrushes in solution, (ii) self-assembly of di- and triblock copolymers comprising comb-shaped and bottlebrush blocks in solutions and melts, and (iii) cross-linked and self-assembled gels with bottlebrush subchains. We demonstrate how theoretical models enable quantitative prediction and interpretation of experimental results and provide rational guidance for design of new materials with physical properties tunable by architecture of constituent bottlebrush blocks.

Bottlebrush polymer gels: architectural control over swelling and osmotic bulk modulus

Swelling behaviour and bulk moduli of polymer gels comprising of crosslinked bottlebrush subchains enable fine tuning by varying polymerization degrees of the main and side chains of the bottlebrush strands as well as their grafting densities. By using scaling approach we predict power law dependences of structural and elastic properties of swollen bottlebrush gels on the set of relevant architectural parameters and construct phase diagrams consisting of regions corresponding to different power law asymptotics for these dependences. In particular, our theory predict that bulk elastic modulus of the gel exhibits non-monotonous dependence on the degree of polymerization of side chains of the bottlebrush strands.

Micelles Formed by an AB Copolymer with Bottlebrush Blocks: Scaling Theory

We present a scaling theory describing the equilibrium properties of spherical micelles formed by a diblock copolymer with bottlebrush blocks in a selective solvent. The theory predicts a number of new thermodynamic regimes inherent for copolymers with relatively short main chains (long side chains) in the bottlebrush blocks. These regimes with a novel set of scaling exponents for the micelle properties are characterized by limiting extension of the main chains of the core or/and corona-forming blocks and do not exist for micelles of conventional linear block copolymers. The theoretical predictions are confronted to experiments.

The Micellization of Well-Defined Single Graft Copolymers in Block Copolymer/Homopolymer Blends

A series of well-defined (polyisoprene)2(polystyrene), I2S, single graft copolymers with similar total molecular weights but different compositions, fPS, were blended with a low molecular weight polyisoprene homopolymer matrix at a constant concentration 2 wt%, and the micellar characteristics were studied by small-angle x-ray scattering. To investigate the effect of macromolecular architecture on the formation and characteristics of micelles, the results on the single graft copolymers were compared with those of the corresponding linear polystyrene-b-polyisoprene diblock copolymers, SI. The comparison reveals that the polystyrene core chains are more stretched in the case of graft copolymer micelles. Stretching turned out to be purely a result of the architecture due to the second polyisoprene block in the corona. The micellization of a (polystyrene)2(polyisoprene), S2I, graft copolymer was also studied, and the comparison with the results of the corresponding I2S and SI copolymers emphasizes the need for a critical core volume rather than a critical length of the core-forming block, in order to have stable micelles. Finally, the absence of micellization in the case of the I2S copolymer with the highest polystyrene volume fraction is discussed. For this sample, macrophase separation occurs, with polyisoprene cylinders formed in the copolymer-rich domains of the phase-separated blends.

Structural Analysis of Bottlebrush Block Copolymer Micelles Using Small-Angle X-ray Scattering

We present structural analysis of spherical diblock copolymer micelles where core blocks have bottlebrush architecture. The dependence of the core radius (R_core) and the corona thickness (L_corona) on the core block length (N_core) is investigated using small-angle X-ray scattering (SAXS) and discussed in terms of the stiffness of a core-forming polymer posed by its long fluoroalkyl side chains. The conformation of the core block is strongly stretched, and the measured exponents α and β from power-law correlations, R_core ∼ N_core^α and L_corona ∼ N_core^β, respectively, are greater than those from any scaling predictions for block copolymer micelles with a flexible, linear core-block. Such deviations are attributed to the appreciable chain stiffness of the bottlebrush core block, and a simple model is suggested to understand how the core block stiffness influences both the dimensions of core and corona.

Micellization Behaviour of Linear and Nonlinear Block Copolymers Based on Poly(n-hexyl isocyanate) in Selective Solvents

Block copolymers have attracted significant scientific and economic interest over the last decades due to their ability to self-assemble into ordered structures both in bulk and in selective solvents. In this work, the self-assembly behaviour of both linear (diblocks, triblocks and pentablocks) and nonlinear (miktoarm stars and a block-graft) copolymers based on poly(n-hexyl isocyanate), PHIC, were studied in selective solvents such as n-heptane and n-dodecane. A variety of experimental techniques, namely static and dynamic light scattering, dilute solution viscometry and atomic force microscopy, were employed to study the micellar structural parameters (e.g., aggregation number, overall micellar size and shape, and core and shell dimensions). The effect of the macromolecular architecture, the molecular weight and the copolymer composition on the self-assembly behaviour was studied. Spherical micelles in equilibrium with clusters were obtained from the block copolymers. Thermally stable, uniform and spherical aggregates were found from the triblock copolymers. The poly(n-hexyl isocyanate)-b-polyisoprene-b-poly(n-hexyl isocyanate),-HIH copolymers tend to adopt closed loop conformation, leading to more elongated cylindrical-type structures upon increasing the concentration. Clustering effects were also reported in the case of the pentablock terpolymers. The topology of the blocks plays an important role, since the poly(n-hexyl isocyanate)-b-polystyrene-b-polyisoprene-b-polystyrene-b-poly(n-hexyl isocyanate), HSISH terpolymer shows intermicellar fusion of spherical micelles, leading to the formation of extended networks. The formation of spherical micelles in equilibrium with clusters was obvious in the case of the miktoarm stars, whereas the block-graft copolymer shows the existence of mainly unimolecular micelles.

Supramolecular Triblock Copolymers Through the Formation of Hydrogen Bonds: Synthesis, Characterization, Association Effects in Solvents of Different Polarity

Anionic polymerization techniques were employed for the synthesis of linear polystyrene (PS) and block copolymer of PS and polyisoprene (PI) PS-b-PI bearing end hydroxyl groups. Following suitable organic chemistry transformation, the –OH end groups were converted to moieties able to form complementary hydrogen bonds including 2,6-diaminopurine, Dap, thymine, Thy, and the so-called Hamilton receptor, Ham. The formation of hydrogen bonds was examined between the polymers PS-Dap and PS-b-PI-Thy, along with the polymers PS-Ham and PS-b-PI-Thy. The conditions under which supramolecular triblock copolymers are formed and the possibility to form aggregates were examined both in solution and in the solid state using a variety of techniques such as ¹H-NMR spectroscopy, size exclusion chromatography (SEC), dilute solution viscometry, dynamic light scattering (DLS), thermogravimetric analysis (TGA), differential thermogravimetry (DTG), and differential scanning calorimetry (DSC).

Nanogels as drug-delivery systems: a comprehensive overview

Nanogels have attracted considerable attention as nanoscopic drug carriers, particularly for site-specific or time-controlled delivery of bioactive mediators. A high diversity of polymer systems and the simple modification of their physicochemical features have provided multipurpose forms of nanogel preparations. Nanogels have outstandingly high stability, drug loading ability, biologic consistence, good permeation capability and can be responsive to environmental stimuli. Great potential has been shown by nanogels in many fields including delivery of genes, chemotherapy drugs, diagnosis, targeting of specific organs and several others. This review focuses mainly on different types of nanogels, methods of preparation including methods of drug loading, different modes of biodegradation mechanisms as well as main mechanisms of drug release from nanogels. Recent applications of nanogels are also briefly discussed and exemplified.

Macromolecular Brushes Based on Poly(L-Lactide) and Poly(ε-Caprolactone) Single and Double Macromonomers via ROMP. Synthesis, Characterization and Thermal Properties

Single and double poly(L-lactide) (PLLA) and poly(ε-caprolactone) (PCL) macromonomers having a norbornenyl polymerizable group were prepared by conventional Ring Opening Polymerization (ROP). These macromonomers were further subjected to ring opening metathesis polymerization (ROMP) reactions in order to produce double polymer brushes consisting of PLLA or PCL side chains on a polynorbornene (PNBE) backbone. Statistical or block ring opening metathesis copolymerization of the PLLA and PCL macromonomers afforded the corresponding random and block double brushes. Sequential ROMP of the single PLLA, PCL and PLLA macromonomers resulted in the synthesis of the corresponding triblock copolymer brush. The molecular characteristics of the macromolecular brushes were obtained by 1H-NMR spectroscopy and Size Exclusion Chromatography. The thermal properties of the samples were studied by thermogravimetric analysis, TGA, Differential Thermogravimetry, DTG and Differential Scanning Calorimetry, DSC.

Statistical Copolymers of n-Butyl Vinyl Ether and 2-Chloroethyl Vinyl Ether via Metallocene-Mediated Cationic Polymerization. A Scaffold for the Synthesis of Graft Copolymers

The cationic statistical copolymerization of n-butyl (be) and 2-chloroethyl vinyl ether (CEVE), is efficiently conducted using bis(η⁵-cyclopentadienyl)dimethyl zirconium (Cp₂ZrMe₂) in combination with tetrakis(pentafluorophenyl)borate dimethylanilinum salt [B(C₆F₅)₄]^–[Me₂NHPh]⁺, as an initiation system. The reactivity ratios are calculated using both linear graphical and non-linear methods. Structural parameters of the copolymers are obtained by calculating the dyad sequence fractions and the mean sequence length, which are derived using the monomer reactivity ratios. The glass transition temperatures (T_g) of the copolymers are measured by Differential Scanning Calorimetry (DSC), and the results are compared with predictions based on several theoretical models. The statistical copolymers are further employed as scaffolds for the synthesis of graft copolymers having poly(vinyl ether)s as a backbone and either poly(ε-caprolactone) (PCL) or poly(l-lactide) (PLLA) as side chains. Both the grafting “onto” and the grafting “from” methodologies are employed. The reaction sequence is monitored by Size Exclusion Chromatography (SEC), NMR and IR spectroscopies. The advantages and limitations of each approach are thoroughly examined.

Experiments and Simulations of Complex Sugar-Based Coil-Brush Block Polymer Nanoassemblies in Aqueous Solution

In this work, we investigated the fundamental molecular parameters that guide the supramolecular assembly of glucose-based amphiphilic coil-brush block polymers in aqueous solution and elucidated architecture-morphology relationships through experimental and simulation tools. Well-defined coil-brush polymers were synthesized through ring-opening polymerizations (ROP) of glucose carbonates to afford norbornenyl-functionalized poly(glucose carbonate) (NB-PGC) macromonomers, followed by sequential ring-opening metathesis polymerizations (ROMP) of norbornene N-hydroxysuccinimidyl (NHS) esters and the NB-PGC macromonomers. Variation of the macromonomer length and grafting through ROMP conditions allowed for a series of coil-brush polymers to be synthesized with differences in the brush and coil dimensions, independently, where the side chain graft length and brush backbone were used to tune the brush, and the coil block length was used to vary the coil. Hydrolysis of the NHS moieties gave the amphiphilic coil-brush polymers, where the hydrophilic-hydrophobic ratios were dependent on the brush and coil relative dimensions. Experimental assembly in solution was studied and found to yield a variety of structurally dependent nanostructures. Simulations were conducted on the solution assembly of coil-brush polymers, where the polymers were represented by a coarse-grained model and the solvent was represented implicitly. There is qualitative agreement in the phase diagrams obtained from simulations and experiments, in terms of the morphologies of the assembled nanoscopic structures achieved as a function of coil-brush design parameters ( e.g., brush and coil lengths, composition). The simulations further showed the chain conformations adopted by the coil-brush polymers and the packing within these assembled nanoscopic structures. This work enables the predictive design of nanostructures from this glucose-based coil-brush polymer platform while providing a fundamental understanding of interactions within solution assembly of complex polymer building blocks.

Polymeric nanogels as drug delivery systems

The present review focuses on the description of the design, synthesis and physico-chemical and biological evaluation of polymer nanogels. Nanogels are robust swollen cross-linked polymer nanoparticles that can be used as highly efficient and biodegradable carriers for the transport of drugs in controlled drug delivery. In this article, various types of nanogels are described and methods for their preparation discussed. The possibility of using synthesized nanosystems for targeting are reviewed to show the potential of tailored structures to reach either solid tumor tissue or direct tumor cells. Finally, the methods for encapsulation or attachment of biologically active molecules, e.g. drugs, proteins, are described and compared.

Complex Polymeric Architectures Self-Assembling in Unimolecular Micelles: Preparation, Characterization and Drug Nanoencapsulation

Unimolecular polymeric micelles are a class of single-molecule amphiphilic core-shell polymeric architectures, where the hydrophobic core is well stabilized by the hydrophilic shell, avoiding intermolecular core-core interactions. Multi-arm copolymers with a dendritic core, as well as hyperbranched and comb-like polymers, can form unimolecular micelles easily. In this review, examples of polymers able to form detectable unimolecular micelles will be presented, summarizing the analytical techniques used to characterize the unimolecular micelles and discriminate them from other supramolecular aggregates, such as multi-micelle aggregates. Unimolecular micelles are suitable for the nanoencapsulation of guest molecules. Compared to traditional supramolecular micelles, unimolecular micelles do not disassemble under dilution and are stable to environmental modifications. Recent examples of their application as drug delivery systems, endowed with increased stability and transport properties, will be discussed.

Synthesis, Characterization and Thermal Properties of Poly(ethylene oxide), PEO, Polymacromonomers via Anionic and Ring Opening Metathesis Polymerization

Branched polymers are a valuable class of polymeric materials. In the present study, anionic polymerization techniques were employed for the synthesis of low molecular weight poly(ethylene oxide) (PEO) macromonomers bearing norbornenyl end groups. The macromonomers were characterized by SEC, MALDI-TOF and NMR spectroscopy. Subsequent ring opening metathesis polymerization (ROMP) of the macromonomers using ruthenium catalysts (Grubbs catalysts of the 1st, 2nd and 3rd generations) afforded the corresponding polymacromonomers. The effects of the macromonomer molecular weight, the type of the catalyst, the nature of the solvent, the monomer concentration and the polymerization temperature on the molecular characteristics of the branched polymers were examined in detail. The crystallization behavior of the macromonomers and the corresponding polymacromonomers were studied by Differential Scanning Calorimetry (DSC). The thermal stability and the kinetics of the thermal decomposition of the samples were also studied by Thermogravimetric Analysis (TGA). The activation energies of the thermal decomposition were analyzed using the Ozawa–Flynn–Wall and Kissinger methodologies.

Synthesis and self-assembly of polystyrene-based diblock and triblock coil–brush copolymers

Anionic coil–brush, brush–coil–brush and coil–brush–coil type polystyrene-based di- and tri-block copolymers were synthesized and their micellization behavior was compared.

Encapsulation of unmodified Gibbsite via conventional emulsion polymerisation using charged co-oligomers

A simple procedure for the encapsulation of unmodified Gibbsite was developed using conventional emulsion polymerization and charged oligomers as stabilisers.

New progress and prospects: The application of nanogel in drug delivery

Nanogel has attracted considerable attention as one of the most versatile drug delivery systems especially for site-specific and/or time-controlled delivery of bioactive agents owing to their combining features of hydrogel and nanoparticle. Physically synthesized nanogels can offer a platform to encapsulate various types of bioactive compounds, particularly hydrophobic drugs and biomacromolecules, but they have poor mechanical stability, whereas nanogels prepared by chemical cross-link have a wider application and larger flexibility. As an ideal drug-delivery carrier, nanogel has excellent drug loading capacity, high stability, biologic consistence and response to a wide variety of environmental stimuli. Nowadays, targeting and response especially multi-response of the nanogel system for drug delivery have become an issue in research. And the application study of nanogels mainly focuses on antitumor agents and proteins. This review focuses on the formation of nanogels (physical and chemical cross-linking) and their release behavior. Recent application of nanogels is also discussed.

Nanogel--an advanced drug delivery tool: Current and future

Nanogels are robust nanoparticles that could be used to deliver active drug compounds in controlled drug delivery applications. Nanogels drug delivery system is more effective and safer for both hydrophilic and hydrophobic drugs due to their chemical composition and formulations that are inappropriate for other formulations. Nanogels have enabled enlargement of functionalized nanoparticles, which act as a drug carriers that can be loaded with drugs and other active material to be released in a controlled manner at specific site. This review aims at providing general introduction on nanogels, recent synthesis methodology and their novel application in different fields.

Brownian dynamics simulation of comicellization of amphiphilic block copolymers with different tail lengths

Brownian dynamics simulations were performed to study the self-assembly of mixed linear amphiphilic block copolymers. The molecules consist of similar hydrophilic heads and hydrophobic tails of different lengths. The model amphiphilic diblock copolymers have been selected to gain insight into the comicellization process in concentrated regimes, and the micelles were not kinetically frozen on the time scale of simulation. The critical micelle concentration (cmc), micelle size distribution, radius of gyration distribution, density profile of comicelles, shape anisotropy, and dynamics of comicellization have been studied as a function of the varying molar fraction of components. The cmc's of systems rich in the molar fraction of each type were found to be close to the cmc of that component. It has also been found that at a certain concentration comicellization affects the cmc in mixed systems. The weight-average aggregate size distribution of mixed copolymers was found to be between the aggregate distributions of short and long copolymers and becomes broader because of mixing. Moreover, values of the most probable aggregate size and radius of gyration of comicelles follow the mixing rule. Results show that small aggregates are mainly made from shorter block copolymers, whereas longer block copolymers form the major portion of large clusters. Furthermore, the cores of the micelles are mainly composed of longer block copolymers, and in all cases, the concentrations of shorter block copolymers are more dominant in the outer part than in the interior regions. In addition, the dynamics of polymeric micelles was studied using tracer and extraction autocorrelation functions and their relaxation times. The tracer correlation time increases with increasing longer copolymer concentration and deviates positively from the mixing rule. We also find that the total extraction correlation time increases exponentially from short to long copolymers, but the presence of long block copolymers linearly increases the short copolymer extraction correlation times. Short block copolymers, however, linearly decrease the long copolymer correlation times.

Synthesis and self-assembly of brush-type poly[poly(ethylene glycol)methyl ether methacrylate]-block-poly(pentafluorostyrene) amphiphilic diblock copolymers in aqueous solution

Well-defined fluorinated brush-like amphiphilic diblock copolymers of poly[poly(ethylene glycol)methyl ether methacrylate] (P(PEGMA)) and poly(pentafluorostyrene) (PPFS) have been successfully synthesized via atom transfer radical polymerization (ATRP). The self-assembly behavior of these polymers in aqueous solutions was studied using (1)H NMR, fluorescence spectrometry, static and dynamic light scattering and transmission electron microscopy techniques. The micellar structure comprised of PPFS as the core and brush-like (hydrophobic main chain and hydrophilic branches) polymers as the coronas. The hydrodynamic radius (R(h)) of the micelles in aqueous solution was in the nanometer range, independent of the polymer concentration, consistent with a closed association model. Diblock copolymers with a longer P(PEGMA) block formed micelles with smaller R(h) and lower aggregation numbers consistent with an improved solubilization of the core. The micelles possessed a thick hydration layer as verified by the ratio of the radius of gyration, R(g) to the hydrodynamic radius, R(h). The aggregation number and ratio of R(g) to R(h) were observed to increase with temperature (20-50 degrees C), while the R(h) of the micelle decreased slightly over the same temperature range. An increase in temperature induced the brush-like PEG segments in the corona to dehydrate and shrink while forming micelles with larger aggregation numbers.