High Refractive Index Polyimides Derived from 2,7-Bis(4-aminophenylenesulfanyl)thianthrene and Aromatic Dianhydrides

Monomer Dependence of Colorless and Transparent Polyimide Films: Thermomechanical Properties, Optical Transparency, and Solubility

Six poly(amic acid)s (PAAs) were synthesized by reacting bis(3-aminophenyl) sulfone with various dianhydride monomers such as pyromellitic dianhydride, 4,4'-biphthalic anhydride, dicyclohexyl-3,4,3',4'-tetracarboxylic dianhydride, 4,4'-oxidiphthalic anhydride, 3,3',4,4'-benzophenonetetracarboxylic dianhydride, and 4,4'-(hexafluoroisopropylidene) diphthalic anhydride. These PAAs were then converted to polyimide (PI) films by thermal imidization at various temperatures. To obtain colorless and transparent PI (CPI), the dianhydride monomer used in this study had an overall bent structure, a structure containing a strong electron-withdrawing -CF3 substituent or an alicyclic ring. In addition, some monomers contained ether or ketone functional groups in their bent structures. The thermomechanical properties, optical transparency, and solubility of CPI films with six different dianhydride monomer structures were investigated, and the correlation between the monomer structure and CPI film properties was clarified. Overall, CPI with an aromatic main chain structure or a linear structure had excellent thermal and mechanical properties. In contrast, CPI with a bent structure containing functional groups or substituents in the main chain exhibited excellent optical transparency and solubility.

Recent Progress in Sulfur-Containing High Refractive Index Polymers for Optical Applications

The development in the field of high refractive index materials is a crucial factor for the advancement of optical devices with advanced features such as image sensors, optical data storage, antireflective coatings, light-emitting diodes, and nanoimprinting. Sulfur plays an important role in high refractive index applications owing to its high molar refraction compared to carbon. Sulfur exists in multiple oxidation states and can exhibit various stable functional groups. Over the last few decades, sulfur-containing polymers have attracted much attention owing to their wide array of applications governed by the functional group of sulfur present in the polymer repeat unit. The interplay of refractive index and various other polymer properties contributes to successfully implementing a specific polymer material in optical applications. The focus on developing optoelectronic devices induced an ever-increasing need to integrate different functional materials to achieve the devices' full potential. Several devices that see the potential use of sulfur in high refractive index materials are reviewed in the study. Like sulfur, selenium also exhibits high molar refraction and unique chemical properties, making it an essential field of study. This review covers the research and development in the field of sulfur and selenium in different forms of functionality, focusing on the chemistry of bonding and the optical properties of the polymers containing the heteroatoms mentioned above. The strategy and rationale behind incorporating heteroatoms in a polymer matrix to produce high-refractive-index materials are also described in the present review.

Molecular Structure and Properties of Sulfur-Containing High Refractive Index Polymer Optical Materials

High refractive index polymers (HRIPs) are widely used in lenses, waveguide, antireflective layer and encapsulators, especially the advanced fields of augmented/virtual reality (AR / VR) holographic technology and photoresist for chip manufacturing. In order to meet the needs of different applications, the development of HRIPs focuses not only on the increase in refractive index but also on the balance of other properties. Sulfur-containing high refractive index polymers have received extensive attention from researchers due to their excellent properties. In recent years, not only ultrahigh refractive index sulfur-containing polymers have been continuously developed, but also low dispersion, low birefringence, high transparency, good mechanical properties, and machinability have been studied. The design of HRIPs is generally based on formulas and existing experience. In fact, molecular structure and properties are closely related. Mastering the structure-property relationship helps researchers to develop high refractive index polymer materials with balanced properties. This review briefly introduces the preparation methods of sulfur-containing high refractive index polymers, and summarizes the structure-property relationship between the sulfur-containing molecular structure and optical properties, mechanical properties, thermal properties, etc. Finally, the important role of synergistic effect in the synthesis of HRIPs and the prospect of future research on HRIPs are proposed.

A new series of magnetic and luminescent layered hybrid materials obtained from thianthrene phosphonic acid: M(H2O)PO3-S2C12H7 (M = Cu, Zn) and M(H2O)2(PO2OH-S2C12H7)2 (M = Mn, Co)

Four new metallophosphonates with the chemical formulae M(H2O)PO3-S2C12H7 (M = Cu, Zn) and M(H2O)2(PO2OH-S2C12H7)2 (M = Mn, Co) were synthesized using a hydrothermal route from the original bent rigid thianthrene-2-ylphosphonic acid (TPA). This organic precursor crystallizes in a non-centrosymmetric space group P212121 and presents a unique bent geometry due to the presence of two sulfur atoms in its rigid platform architecture. Obtained as single crystal and polycrystalline powders, the structures of the four hybrid materials were solved using X-ray diffraction on single crystals in a monoclinic P21/c space group. These compounds adopt a lamellar structure consisting of one inorganic subnetwork alternating with a 'sawtooth' double organic -S2C12H7 subnetwork. The inorganic layers of these compounds are made of (PO3C) or partially deprotonated (PO2OHC) tetrahedra connected by the apices to isolated ZnO3(H2O) tetrahedra, Cu2O6(H2O)2 copper dimers and cobalt and manganese MO4(H2O)2 octahedra, where the latter two exhibit an isotype structure. Thermogravimetric analysis was performed to confirm the amount of water molecules present in the formula, to track the dehydration process of the structures, and to evaluate their thermal stability. The magnetic properties of the copper, cobalt, and manganese-based materials were investigated from 2 K to 300 K by using a SQUID magnetometer revealing dominant antiferromagnetic interactions with Weiss temperatures of -8.0, -10, and -1 K, respectively. These magnetic behaviors were further corroborated by first-principles simulations based on Density Functional Theory (DFT). Finally, the absorption and photoluminescence properties of both the ligand and hybrid materials were investigated, revealing diverse excitation and recombination mechanisms. The organic moiety based on thianthrene significantly influenced the absorption and emission, with additional peaks attributed to transition metals. Singlet and triplet states recombination were observed, accompanied by an unidentified quenching mechanism affecting the triplet state lifetime.

Synthesis and Characterization of Organo-Soluble Polyimides Based on Polycondensation Chemistry of Fluorene-Containing Dianhydride and Amide-Bridged Diamines with Good Optical Transparency and Glass Transition Temperatures over 400 °C

Polymeric optical films with light colors, good optical transparency and high thermal resistance have gained increasing attention in advanced optoelectronic areas in recent years. However, it is somewhat inter-conflicting for achieving the good optical properties to the conventional thermal resistant polymers, such as the standard aromatic polyimide (PI) films, which are well known for the excellent combined properties and also the deep colors. In this work, a series of wholly aromatic PI films were prepared via the polycondensation chemistry of one fluorene-containing dianhydride, 9,9-bis(3,4-dicarboxyphenyl)fluorene dianhydride (FDAn) and several aromatic diamines with amide linkages in the main chain, including 9,9-bis [4-(4-aminobenzamide)phenyl]fluorene (FDAADA), 2,2'-bis(trifluoromethyl)-4,4'-bis[4-(4-aminobenzamide)] biphenyl (ABTFMB), and 2,2'-bis(trifluoromethyl)-4,4'-bis[4-(4-amino-3-methyl)benzamide] biphenyl (MABTFMB). The derived FLPI-1 (FDAn-FDAADA), FLPI-2 (FDAn-ABTFMB) and FLPI-3 (FDAn-MABTFMB) resins showed good solubility in the polar aprotic solvents, such as N-methyl-2-pyrrolidone (NMP), N,N-dimethylacetamide (DMAc) and dimethyl sulfoxide (DMSO). The solution-processing FDAn-PI films exhibited good optical transmittance over 80.0% at a wavelength of 500 nm (T500), yellow indices (b*) in the range of 1.01-5.20, and haze values lower than 1.0%. In addition, the FDAn-PI films showed low optical retardance with optical retardation (Rth) values in the range of 31.7-390.6 nm. At the same time, the FDAn-PI films exhibited extremely high glass transition temperatures (Tg) over 420 °C according to dynamic mechanical analysis (DMA) tests. The FDAn-PI films showed good dimensional stability at elevated temperatures with linear coefficients of thermal expansion (CTE) in the range of (31.8-45.8) × 10-6/K.

High Refractive Index Polymer Thin Films by Charge-Transfer Complexation

High refractive index polymers are essential in next-generation flexible optical and optoelectronic devices. This paper describes a simple synthetic method to prepare polymeric optical coatings possessing high refractive indexes. Poly(4-vinylpyridine) (P4VP) thin films prepared using initiated chemical vapor deposition are exposed to highly polarizable halogen molecules to form stable charge-transfer complexes: P4VP-IX (X = I, Br, and Cl). Fourier transform infrared spectroscopy was used to confirm the formation of charge-transfer complexes. Characterized by spectroscopic ellipsometry, the maximum refractive index of 2.08 at 587.6 nm is obtained for P4VP-I₂. For P4VP-IBr and P4VP-ICl, the maximum refractive indexes are 1.849 and 1.774, respectively. By controlling the concentration of charge-transfer complexes, either through the halogen incorporation step or polymer composition through copolymerization with ethylene glycol dimethacrylate, the refractive indexes of the polymer thin films can be precisely controlled. The feasibility of P4VP-IX materials as optical coatings is also explored. The refractive index and thickness uniformity of a P4VP-I₂ film over a 10 mm diameter circular area were characterized, showing standard deviations of 0.0769 and 1.91%, respectively.

The Properties, Synthesis, and Materials Applications of 1,4-Dithiins and Thianthrenes

1,4-Dithiin and its dibenzo-analogue, thianthrene, represent a class of non-aromatic, sulfur-rich heterocycles. Their unique properties, stemming from both their non-planar structures and reversible one- and two-electron oxidations, serve as primary motivators for their use in the development of new materials. The applications of 1,4-dithiins and thianthrenes are rich and diverse, having been used for energy storage and harvesting, and the synthesis of phosphorescent compounds and porous polymers, among other uses. This review offers first an overview of the properties of 1,4-dithiin and thianthrene. Next, we describe enabling synthetic methodology to access 1,4-dithiins and thianthrenes with various substitution patterns. Lastly, the utility of 1,4-dithiin and thianthrene in the construction and design of new materials is detailed using select literature examples.

1 Introduction

2 Properties of 1,4-Dithiins and Thianthrenes

3 Synthesis of 1,4-Dithiins and Thianthrenes

3.1 Synthesis of 1,4-Dithiins

3.2 Synthesis of Thianthrenes

4 Application of 1,4-Dithiins and Thianthrenes in Materials

4.1 Thianthrene-Containing Polymers

4.2 Thianthrene in Redox-Active Materials

4.3 Thianthrenes and 1,4-Dithiins in Supramolecular Chemistry and Self-Assembly

4.4 Thianthrenes in Phosphorescent Materials

4.5 Thianthrenes with Other Interesting Photophysical Properties

4.6 Thianthrenes in the Synthesis of Non-natural Products

5 Conclusion

Vinyl mercaptoethanol as a reactive monomer for the preparation of functional homo- and copolymers with (meth)acrylates

Vinyl mercaptoethanol is a scalable vinyl thioether monomer, which can readily be polymerized in a free radical process or by controlled methods. It tends to form alternating copolymers if copolymerized with acrylates and methacrylates.

Cationic ring-opening polymerization of a five membered cyclic dithiocarbonate having a tertiary amine moiety

A dibenzylamine derived cyclic dithiocarbonate (1) undergoes ring-opening polymerization due to the greater reactivity of exocyclic sulfur compared to the tertiary amine with methyl triflate.

Polymers from S-vinyl monomers: reactivities and properties

This review summarises the work of several decades on the polymerisation of S-vinyl monomers, ranging from the early reports of suitable polymerisation techniques for these monomers to their recent renaissance in various applications.

High Refractive Index Photopolymers by Thiol-Yne "Click" Polymerization

A scalable synthesis of high refractive index, optically transparent photopolymers from a family of low-viscosity multifunctional thiol and alkyne monomers via thiol-yne "click" is described herein. The monomers designed to incorporate high refractive index cores consisting of aryl and sulfide groups with high intrinsic molar refraction were synthesized starting from commercially available low-cost raw materials. The low-viscosity (<500 cP) thiol-yne resins formulated with these new multifunctional monomers and a phosphine oxide photoinitiator underwent efficient thiol-yne polymerizations upon exposure to 405 nm light at 30 mW/cm². In contrast to the previously reported thiol-ene systems, the kinetic profile of these photopolymerizations showed significant dependence on the nature of the thiol and alkyne monomers. However, the ability of the thiol-yne reaction to introduce a large number of sulfide linkages compared to that of thiol-ene systems yielded cross-linked high optical quality photopolymers with a polymer refractive index that exceeds 1.68 (n_D/20 °C). Interestingly, the photopolymer formed from the least sterically hindered alkynyl thioether monomer 2b with flexible thioether core and the dithiol 1a exhibited unprecedented difference in the polymer refractive index as compared to that of the resin with polymerization-induced changes reaching up to 0.08. Furthermore, the implementation of these low-viscosity thiol-yne resins was demonstrated by preparing two-stage photopolymeric holographic materials with a dynamic range of ∼0.02 and haze < 1.5% in two-dimensional high refractive index structures.

Development of Novel Triazine-Based Poly(phenylene sulfide)s with High Refractive Index and Low Birefringence

High-refractive-index (high-n) polymers with a high optical transparency and low birefringence (Δn) have been desired in progressive optoelectronic devices. However, the trade-off between high-n and low-Δn remains a challenge at present. Here, the development of a novel array of high-n, high-sulfur-containing, highly transparent, colorless poly(phenylene sulfide) (PPS) polymers bearing triazine units in the main chains is reported. Six new triazine monomers T1-T6 with various pendant groups via different linkers (-O- and -NH-) could be prepared for developing PPSs with high-n and low Δn values. These PPSs (P1-P6) were obtained by the polycondensation of T1-T6 with commercial aromatic dithiol, 4,4'-thiobisbenzenethiol, respectively, which showed very high-n values (n av: 1.6902-1.7169 at 633 nm), high optical transparency (T % > 90% @ 400 nm), and low birefringence (Δn = 0.0015-0.0042). All the PPSs displayed high n ∞ values (1.6340-1.6654), providing valuable information for the development of high-n triazine-based PPS materials for application not only in the visible region but also in the near-infrared region.

Prediction Model for Antimalarial Activities of Hemozoin Inhibitors by Using Physicochemical Properties

The rapid spread of strains of malaria parasites that are resistant to several drugs has threatened global malaria control. Hence, the aim of this study was to predict the antimalarial activity of chemical compounds that possess anti-hemozoin-formation activity as a new means of antimalarial drug discovery. After the initial in vitro anti-hemozoin-formation high-throughput screening (HTS) of 9,600 compounds, a total of 224 hit compounds were identified as hemozoin inhibitors. These 224 compounds were tested for in vitro erythrocytic antimalarial activity at 10 μM by using chloroquine-mefloquine-sensitive Plasmodium falciparum strain 3D7A. Two independent experiments were conducted. The physicochemical properties of the active compounds were extracted from the ChemSpider and SciFinder databases. We analyzed the extracted data by using Bayesian model averaging (BMA). Our findings revealed that lower numbers of S atoms; lower distribution coefficient (log D) values at pH 3, 4, and 5; and higher predicted distribution coefficient (ACD log D) values at pH 7.4 had significant associations with antimalarial activity among compounds that possess anti-hemozoin-formation activity. The BMA model revealed an accuracy of 91.23%. We report new prediction models containing physicochemical properties that shed light on effective chemical groups for synthetic antimalarial compounds and help with in silico screening for novel antimalarial drugs.

Selenide-Containing Polyimides with an Ultrahigh Intrinsic Refractive Index

This work developed novel selenium-containing polyimides with a high intrinsic refractive index. Four polyimides with different selenium contents and repeat unit structures were designed and synthesized via amine-dianhydride polycondensation of one of two diamines, i.e., 4,4'-oxydianiline or bis(4-aminophenyl)selanide, with one of two dianhydrides, i.e., bis(4-(3,4-dicarboxylbenzoyloxy)phenyl) ester dianhydride or 1,1'-bis(4-(3,4-dicarboxylbenzoyloxy)phenyl) selenide dianhydride. Various techniques, e.g., nuclear magnetic resonance, Fourier transformed infrared spectroscopy, and wide-angle X-ray diffraction, were used to characterize the polymers' structures. Differential scanning calorimetry, thermogravimetric analysis, ultraviolet-visible spectroscopy, and spectroscopic ellipsometry were used to characterize the properties of the polymers. The selenium contents showed a positive effect on the refractive index of the final polymer. In addition, the refractive index can reach up to 1.968 at 633 nm, which was the highest intrinsic refractive index of a polyimide ever reported. Because of the high intrinsic refractive index, the reflective ratio of visible light on the surface of a silicon wafer was significantly reduced, indicating the potentially utility of the polymer in an anti-reflection coating.

Optically Isotropic, Colorless, and Flexible PITEs/TiO2 and ZrO2 Hybrid Films with Tunable Refractive Index, Abbe Number, and Memory Properties

A series of novel polyimidothioethers (PITEs) and the respective polymer hybrids of titania or zirconia with fantastic thermal stability and optical properties have been successfully prepared. These colorless PITEs with high transparency were synthesized by Michael polyaddition from commercially available dithiol and bismaleimides monomers. The PITE with sulfide and hydroxyl groups (S-OH) and the corresponding hybrid films declare ultra-lowest birefringence value of 0.002 and tunable refractive index (1.65–1.81 for S-OH/titania and 1.65–1.80 for S-OH/zirconia), implying large potential to the optical applications in the future. Moreover, the S-OH/zirconia hybrid films exhibit higher Abbe’s number and optical transparency than those of S-OH/titania system because larger energy band gap of ZrO₂. Furthermore, by adding titania and zirconia as electron acceptor into S-OH system, the charge transfer complex can be facilitated and stabilized caused by the lower LUMO energy level of hybrid materials. Consequently, the devices of memory prepared from these polymer films of hybrid showed interesting and adjustable memory behavior from DRAM, SRAM, to WORM at various titania or zirconia contents with a large ON/OFF ratio (10⁸), denoting that the memory devices derived from these highly transparent novel S-OH/TiO₂ and S-OH/ZrO₂ hybrid films are attractive for the electrical applications.

High-Throughput Screening and Prediction Model Building for Novel Hemozoin Inhibitors Using Physicochemical Properties

It is essential to continue the search for novel antimalarial drugs due to the current spread of resistance against artemisinin by Plasmodium falciparum parasites. In this study, we developed in silico models to predict hemozoin inhibitors as a potential first-step screening for novel antimalarials. An in vitro colorimetric high-throughput screening assay of hemozoin formation was used to identify hemozoin inhibitors from 9,600 structurally diverse compounds. The physicochemical properties of positive hits and randomly selected compounds were extracted from the ChemSpider database; they were used for developing prediction models to predict hemozoin inhibitors using two different approaches, i.e., traditional multivariate logistic regression and Bayesian model averaging. Our results showed that a total of 224 positive-hit compounds exhibited the ability to inhibit hemozoin formation, with 50% inhibitory concentrations (IC₅₀s) ranging from 3.1 μM to 199.5 μM. The best model according to traditional multivariate logistic regression included the three variables octanol-water partition coefficient, number of hydrogen bond donors, and number of atoms of hydrogen, while the best model according to Bayesian model averaging included the three variables octanol-water partition coefficient, number of hydrogen bond donors, and index of refraction. Both models had a good discriminatory power, with area under the curve values of 0.736 and 0.781 for the traditional multivariate model and Bayesian model averaging, respectively. In conclusion, the prediction models can be a new, useful, and cost-effective approach for the first screen of hemozoin inhibition-based antimalarial drug discovery.

Synthesis and characterization of novel polyimides derived from 4,4'-bis(5-amino-2-pyridinoxy)benzophenone: effect of pyridine and ketone units in the main

A diamine monomer, 4,4’-bis(5-amino-2-pyridinoxy)benzophenone, was designed and synthesized, and used to react with commercially different kinds of aromatic dianhydrides to prepare a series of polyimides containing pyridine and ketone units via the classical two-step procedure. Glass transition temperatures (T_g) of the resultant polyimides PI-(1–5) derived from 4,4’-bis(5-amino-2-pyridinoxy) benzophenone with various dianhydrides ranged from 201 to 310 °C measured by differential scanning calorimetry. The temperatures for 5%wt loss of the resultant polyimides in nitrogen atmosphere obtained from the thermogravimetric analysis curves fell in the range of 472–501 °C. The temperatures for 10%wt loss of the resultant polyimides in nitrogen atmosphere fell in the range of 491–537 °C. Meanwhile, the char yields at 800 °C were in the range of 55.3–60.8%. Moreover, the moisture absorption of polyimide films was measured in the range of 0.37–2.09%. The thin films showed outstanding mechanical properties with tensile strengths of 103–145 MPa, an elongation at break of 12.9–15.2%, and a tensile modulus of 1.20–1.88 Gpa, respectively. The coefficients of thermal expansion of the resultant polyimides were obtained among 26–62 ppm °C⁻¹. To sum up, this series of polyimides had a good combination of properties applied for high-performance materials and showed promising potential applications in the fields of optoelectronic devices.

Synthesis and properties of electroactive aromatic polyimides with methyl- or trifluoromethyl-protecting triphenylamine units

Two series of new redox-active aromatic polyimides with methyl- (–CH3) or trifluoromethyl (–CF3)-protecting triphenylamine moieties were prepared from 4,4′-diamino-4″-methyltriphenylamine and 4,4′-diamino-4″-(trifluoromethyl)triphenylamine with aromatic tetracarboxylic dianhydrides via the conventional two-step polycondensation technique. Flexible and strong polyimide films could be obtained via the thermal curing of their precursor poly(amic acid) films or direct solution cast from some organosoluble polyimides. The polyimides showed high glass-transition temperatures between 269°C and 312°C, and they did not show significant decomposition before 500°C in air or under nitrogen atmosphere. Cyclic voltammograms of the polyimide films on the indium–tin oxide-coated glass substrate exhibited a pair of reversible redox waves with half-wave oxidation potentials of 1.08–1.10 V (for the –CH3 series) and 1.23–1.26 V (vs. silver/silver chloride; for the –CF3 series) in acetonitrile solution. The polyimide films showed anodic electrochromism from pale yellow neutral state to purplish blue (for the –CH3 series) and chrome yellow (for the –CF3 series) when oxidized.

Synthesis and electrochemical properties of new redox-active polyimides with (1-piperidinyl)triphenylamine moieties

A series of new electroactive aromatic polyimides with (1-piperidinyl)triphenylamine moieties were prepared from 4,4′-diamino-4″-(1-piperidinyl)triphenylamine and aromatic tetracarboxylic dianhydrides via the conventional two-step polycondensation technique. Flexible and strong polyimide films could be obtained via the thermal curing of their precursor poly(amic acid) films. The polyimides showed high glass transition temperatures between 288°C and 318°C, and they did not show significant decomposition before 500°C in air or nitrogen atmosphere. Cyclic voltammograms of the polyimide films on the indium–tin oxide-coated glass substrate exhibited a pair of reversible oxidation waves with low onset oxidation potentials of 0.45–0.49 V (vs. silver/silver chloride) in acetonitrile solution. Upon oxidation, the color of the polyimide films changes from pale yellow to yellowish green and finally to blue.

Highly efficient ultraviolet light-emitting organosoluble polyimide

A non-conjugated siloxane-containing polyimide without fluorescent dyes exhibited a high fluorescence quantum yield.

Highly transparent and flexible polyimide/ZrO2 nanocomposite optical films with a tunable refractive index and Abbe number

The obtained PI/ZrO₂ hybrid films revealed excellent optical transparency, a tunable refractive index and an Abbe number of 1.804 and 32.18, respectively.

Synthesis and properties of hyperbranched polyimides derived from tetra-amine and long-chain aromatic dianhydrides

The synthesized hyperbranched polyimides obtained from a novel tetra-amine have a treelike randomly branched topology with a branch-on-branch structure, which affords a compact, globular molecule.

New infrared transmitting material via inverse vulcanization of elemental sulfur to prepare high refractive index polymers

Polymers for IR imaging: The preparation of high refractive index polymers (n = 1.75 to 1.86) via the inverse vulcanization of elemental sulfur is reported. High quality imaging in the near (1.5 μm) and mid-IR (3-5 μm) regions using high refractive index polymeric lenses from these sulfur materials was demonstrated.

Synthesis and characterization of novel polyimides from 4,4′-bis(5-amino-2-pyridinoxy)diphenyl ether, 4,4′-bis(5-amino-2-pyridinoxy)diphenyl thioether and 4,4′-bis(5-amino-2-pyridinoxy)diphenyl sulfone

The performance data of the polyimides was comprehensively tested and we find the reverse influence of –O– and –S– groups in diamine and dianhydride on T_g of the polyimides.