Maghemite Nanoparticles on Supported Diblock Copolymer Nanostructures

Magnetic nanoparticle-containing soft-hard diblock copolymer films with high order

For sensor applications, superparamagnetic anisotropy is an indispensable property, which is typically achieved by employing an external field to guide the arrangement of magnetic nanoparticles (NPs). In the present investigation, the diblock copolymer polystyrene-block-poly(N-isopropylacrylamide) (PS-b-PNIPAM) is printed as a template to localize magnetic iron oxide NPs without any external field. Via microphase separation, cylindrical nanostructures of PS in a PNIPAM matrix are obtained, aligned perpendicular to the substrate. Since the magnetite NPs (Fe3O4) are functionalized with hydrophobic organic chains showing affinity to the PS blocks, they can selectively aggregate inside the PS cylinders. Moreover, solvent vapor annealing allows the achievement of nanostructures inside the hybrid system with a very high order, even at a high NP loading. Therefore, NPs can accumulate within PS domains to form perpendicularly aligned aggregates with high periodicity. The magnetic properties of the hybrid films are determined at various temperatures in two orthogonal directions (with PS cylinders vertical and parallel to the applied magnetic field). All hybrid films show superparamagnetism and a remarkable magnetic anisotropy is achieved at certain NP concentrations. This investigation shows a facile route to prepare superparamagnetic films with magnetic anisotropy and offers a novel possibility to future magnetic sensor fabrication.

Printed Thin Magnetic Films Based on Diblock Copolymer and Magnetic Nanoparticles

Printing techniques have been well established for large-scale production and have developed to be effective in controlling the morphology and thickness of the film. In this work, printing is employed to fabricate magnetic thin films composed of polystyrene coated maghemite nanoparticles (γ-Fe₂O₃ NPs) and polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) diblock copolymer. By applying an external magnetic field during the print coating step, oriented structures with a high content of nanoscale magnetic particles are created. The morphology of the magnetic films and the arrangement of NPs within the polymer matrix are characterized with real and reciprocal space techniques. Due to the applied magnetic field, the magnetic NPs self-assemble into microscale sized wires with controlled widths and separation distances, endowing hybrid films with a characteristic magnetic anisotropy. At the nanoscale level, due to the PS coating, the NPs disperse as single particles at low NP concentrations. The NPs self-assemble into nanosized clusters inside the PS domains when the NP concentration increases. Due to a high loading of uniformly dispersed magnetic NPs across the whole printed film, a strong sensitivity to an external magnetic field is achieved. The enhanced superparamagnetic property of the printed films renders them promising candidate materials for future magnetic sensor applications.

Investigating Polymer-Metal Interfaces by Grazing Incidence Small-Angle X-Ray Scattering from Gradients to Real-Time Studies

Tailoring the polymer-metal interface is crucial for advanced material design. Vacuum deposition methods for metal layer coating are widely used in industry and research. They allow for installing a variety of nanostructures, often making use of the selective interaction of the metal atoms with the underlying polymer thin film. The polymer thin film may eventually be nanostructured, too, in order to create a hierarchy in length scales. Grazing incidence X-ray scattering is an advanced method to characterize and investigate polymer-metal interfaces. Being non-destructive and yielding statistically relevant results, it allows for deducing the detailed polymer-metal interaction. We review the use of grazing incidence X-ray scattering to elucidate the polymer-metal interface, making use of the modern synchrotron radiation facilities, allowing for very local studies via in situ (so-called "stop-sputter") experiments as well as studies observing the nanostructured metal nanoparticle layer growth in real time.

Multi-stage freezing of HEUR polymer networks with magnetite nanoparticles

We observe a change in the segmental dynamics of hydrogels based on hydrophobically modified ethoxylated urethanes (HEUR) when hydrophobic magnetite nanoparticles (MNPs) are embedded in the hydrogels. The dynamics of the nanocomposite hydrogels is investigated using dielectric relaxation spectroscopy (DRS) and neutron spin echo (NSE) spectroscopy. The magnetic nanoparticles within the hydrophobic domains of the HEUR polymer network increase the size of these domains and their distance. The size increase leads to a dilution of the polymers close to the hydrophobic domain, allowing higher mobility of the smallest polymer blobs close to the "center". This is reflected in the decrease of the activation energy of the β-process detected in the DRS data. The increase in distance leads to an increase of the size of the largest hydrophilic polymer blobs. Therefore, the segmental dynamics of the largest blobs is slowed down. At short time scales, i.e. 10(-9) s < τ < 10(-3) s, the suppression of the segmental dynamics is reflected in the α-relaxation processes detected in the DRS data and in the decrease of the relaxation rate Γ of the segmental motion in the NSE data with increasing concentration of magnetic nanoparticles. The stepwise (multi-stage) freezing of the small blobs is only visible for the pure hydrogel at low temperatures. On the other hand, the glass transition temperature (Tg) decreases upon increasing the MNP loading, indicating an acceleration of the segmental dynamics at long time scales (τ∼ 100 s). Therefore, it would be possible to tune the Tg of the hydrogels by varying the MNP concentration. The contribution of the static inhomogeneities to the total scattering function Sst(q) is extracted from the NSE data, revealing a more ordered gel structure than the one giving rise to the total scattering function S(q), with a relaxed correlation length ξNSE = (43 ± 5) Å which is larger than the fluctuating correlation length from a static investigation ξSANS = (17.2 ± 0.3) Å.

Arrangement of Maghemite Nanoparticles via Wet Chemical Self-Assembly in PS-b-PNIPAM Diblock Copolymer Films

The structure and magnetic behavior of hybrid films composed of maghemite (γ-Fe2O3) nanoparticles (NPs) and an asymmetric diblock copolymer (DBC) polystyrene61-block-polyN-isopropylacrylamide115 are investigated. The NPs are coated with PS chains, which allow for a selective incorporation inside the PS domains at different NP concentrations. Upon incorporation of low amounts of NPs into the DBC thin films, the initial parallel (to film surface) cylinder morphology changes to a well ordered, perpendicularly oriented one. The characteristic domain distance of the DBC is increased due to the swelling of the PS domains with NPs. At higher NP concentrations, the excess NPs which can no longer be embedded in the PS domains, are accumulated at the film surface, and NP aggregates form. Irrespective of NP concentration, a superparamagnetic behavior of the metal oxide-DBC hybrid films is found. Such superparamagnetic properties make the established hybrid films interesting for high density magnetic storage media and thermoresponsive magnetic sensors.

Self-assembly of diblock copolymer-maghemite nanoparticle hybrid thin films

The arrangement of maghemite (γ-Fe2O3) nanoparticles (NPs) in poly(styrene-d8-block-n-butyl methacrylate) P(Sd-b-BMA) diblock copolymer (DBC) films via a self-assembly process was investigated toward the fabrication of highly ordered maghemite-polymer hybrid thin films. The resulting thin films exhibited a perforated lamella with an enrichment layer containing NPs as investigated with X-ray reflectometry, scanning electron microscopy, atomic force microscopy, and time-of-flight grazing incidence small angle neutron scattering as a function of the NP concentrations. The NPs were selectively deposited in the PSd domains of the DBC during the microphase separation process. At low NP concentrations, the incorporation of the NPs within the DBC thin films resulted in an enhanced microphase separation process and formation of highly oriented and ordered nanostructured hybrid films. At higher NP concentrations, the aggregation of the NPs was dominating and large sized metal oxide clusters were observed. The superparamagnetic properties of the metal oxide-polymer hybrid films at various NP concentrations were probed by a superconducting quantum interference device magnetometer, which shows that the hybrid films are highly attractive for optical devices, magnetic sensors, and magnetic recording devices.

Kinetics of magnetic field-induced orientational ordering in block copolymer/superparamagnetic nanoparticle composites

The combination of external potential dynamics and Brownian dynamics is introduced to study the kinetics of orientational ordering in block copolymer/superparamagnetic nanoparticle composites where the particles are smaller than the domain spacing and preferentially segregate into one block of the copolymer. This simulation method accounts for both excluded volume interactions and dipolar interactions between particles to quantify alignment kinetics. Two-dimensional simulations reveal that higher dipolar interaction strengths lead to faster alignment of the block copolymer, where the orientation kinetics obeys an exponential rate law. The observed rate of alignment increases with increasing dipolar interaction strength and is dependent on the initial state of the block copolymer. The primary mechanism of orientational ordering is found to be the redistribution of monomer segments leading to bridging and growth of the block copolymer domains around the nanoparticles.

Nano- and microstructures of magnetic field-guided maghemite nanoparticles in diblock copolymer films

The control over the alignment of nanoparticles within a block copolymer matrix was investigated for different external magnetic fields with respect to producing well-aligned, highly oriented metal-oxide-polymer nanopatterns. Hybrid films were prepared by solution casting under a range of external magnetic fields. The nano- and microstructure of maghemite nanoparticles within poly(styrene-b-methyl methacrylate) diblock copolymer films as a function of the nanoparticle concentration was studied using optical microscopy, atomic force microscopy, scanning electron microscopy, and grazing incidence small-angle X-ray scattering. Because of a polystyrene (PS) coating, the nanoparticles are incorporated in the PS domains of the diblock copolymer morphology. At higher nanoparticle concentrations, nanoparticle aggregates perturb the block copolymer structure and accumulate at the films surface into wire-shaped stripes. These wire-shaped nanoparticle aggregates form mainly because of the competition between nanoparticle-polymer friction and magnetic dipolar interaction. The magnetic behavior of the hybrid films was probed at different temperatures for two orthogonal directions (with the line-shaped particle aggregates parallel and perpendicular to the magnetic field). The hybrid film systems show superparamagnetic behavior and remarkable shape anisotropy that render them interesting for magnetic applications.

Cobalt nanoparticles growth on a block copolymer thin film: a time-resolved GISAXS study

Cobalt sputter deposition on a nanostructured polystyrene-block-poly(ethylene oxide), P(S-b-EO), template is followed in real time with grazing incidence small-angle X-ray scattering (GISAXS). The polymer template consists of highly oriented parallel crystalline poly(ethylene oxide) (PEO) domains that are sandwiched between two polystyrene (PS) domains. In-situ GISAXS shows that cobalt atoms selectively decorate the PS domains of the microphase-separated polymer film and then aggregate to form surface metal nanopatterns. The polymer template is acting as a directing agent where cobalt metal nanowires are formed. At high metal load, the characteristic selectivity of the template is lost, and a uniform metal layer forms on the polymer surface. During the early stage of cobalt metal deposition, a highly asymmetric nanoparticles agglomeration is dominating structure formation. The cobalt nanoparticles mobility in combination with the high tendency of the nanoparticles to coalescence and to form immobile large-sized particles at the PS domains are discussed as mechanisms of structure formation.

Morphology of thin nanocomposite films of asymmetric diblock copolymer and magnetite nanoparticles

Thin self-assembled nanocomposite films of an asymmetric diblock copolymer and nanoparticles are fabricated. The morphologies of the films of the diblock copolymer poly(styrene-block-n-butyl methacrylate), P(Sd-b-BMA), with different volume fractions of large magnetite Fe(3)O(4) nanoparticles are studied before and after annealing. Neutron reflectometry reveals remarkable evidence that confining asymmetric copolymer to a limit of two layers forces the film, after the annealing, to form a mixed cylindrical-lamellar two-layer structure. This complex morphology is very stable and is preserved after the incorporation of nanoparticles up to 10% volume fraction. The other striking result is that the monodispersed nanoparticles with affinity to the polystyrene (PS) domain and with a size of 10 nm, which is close to the size of the PS chains, are assembled by the diblock copolymer matrix, so the distribution of the nanoparticles is reduced solely to the PS domain of the film. Our studies demonstrate that for asymmetric block copolymers in thin film geometry the self-assembly is strongly influenced by the interfacial and surface energies of the blocks and substrate.

Memory effects in annealed hybrid gold nanoparticles/block copolymer bilayers

We report on the use of the self-organization process of sputtered gold nanoparticles on a self-assembled block copolymer film deposited by horizontal precipitation Langmuir-Blodgett (HP-LB) method. The morphology and the phase-separation of a film of poly-n-butylacrylate-block-polyacrylic acid (PnBuA-b-PAA) were studied at the nanometric scale by using atomic force microscopy (AFM) and Time of Flight Secondary Ion Mass Spectrometry (TOF-SIMS). The templating capability of the PnBuA-b-PAA phase-separated film was studied by sputtering gold nanoparticles (NPs), forming a film of nanometric thickness. The effect of the polymer chain mobility onto the organization of gold nanoparticle layer was assessed by heating the obtained hybrid PnBuA-b-PAA/Au NPs bilayer at T >Tg. The nanoparticles' distribution onto the different copolymer domains was found strongly affected by the annealing treatment, showing a peculiar memory effect, which modifies the AFM phase response of the Au NPs layer onto the polar domains, without affecting their surfacial composition. The effect is discussed in terms of the peculiar morphological features induced by enhanced mobility of polymer chains on the Au NPs layer.

Elastic torsion effects in magnetic nanoparticle diblock-copolymer structures

Magnetic properties of thin composite films, consisting of non-interacting polystyrene-coated γ-Fe(2)O(3) (maghemite) nanoparticles embedded into polystyrene-block-polyisoprene P(S-b-I) diblock-copolymer films are investigated. Different particle concentrations, ranging from 0.7 to 43 wt%, have been used. The magnetization measured as a function of external field and temperature shows typical features of anisotropic superparamagnets including a hysteresis at low temperatures and blocking phenomena. However, the data cannot be reconciled with the unmodified Stoner-Wohlfarth-Néel theory. Applying an appropriate generalization we find evidence for either an elastic torque being exerted on the nanoparticles by the field or a broad distribution of anisotropy constants.

Polymer-template-assisted growth of gold nanowires using a novel flow-stream technique

By utilizing a fluidic device, a gold nanoparticle dispersion is cast onto a nanostructured polymer template using solution subjected to hydrodynamic flow. With in situ grazing incidence small-angle X-ray scattering (GISAXS), the progressive gold deposition from a stream of gold solution onto the polymer template of a diblock copolymer with parallel cylinder morphology arranged into powder-like domains is investigated. The continuously flowing solution causes a systematic increase in the X-ray contrast between both of the microphase-separated blocks of the block copolymer film, indicating flow-induced selective gold immobilization on one block. Both in situ GISAXS data and atomic force microscopy of the metal-deposited polymer film prove the 1D coalescence of nanoparticles into continuous nanowires. With additional gold nanoparticle upload by the continuous flow-stream method, the selectivity of the nanoparticle deposition diminishes as a result of the formation of a pseudo uniform gold layer. Consequently, this flow-stream deposition technique introduces an easy alternative method to the vapor deposition technique for surface gold nanopatterning.

In situ GISAXS investigation of gold sputtering onto a polymer template

Microphase-separation structures in mixed diblock-triblock copolymer thin films are used for the incorporation of gold atoms inside the polymer matrix via sputtering of gold. Polystyrene (PS) spheres are arranged in a liquidlike type with a well defined nearest neighbor distance inside a polyisoprene matrix acting as a template for directing the gold atoms. Sputtering conditions are selected with a very low sputtering rate to avoid clustering in the atmosphere so that gold reaches the polymer surface in its atomic state. Due to the mobility of the gold atoms and the selective interaction with the PS parts of the microphase separation structure, gold is accumulated inside the polymer film in the PS spheres, as probed in situ with grazing incidence small-angle X-ray scattering (GISAXS). Nominally 4.3 A of gold is deposited, which by diffusion is spread out vertically over a thickness of 280 nm. UV-vis spectroscopy reveals a small blue shift for the gold sputtered polymer film. Atomic force microscopy proves the absence of gold clusters on the film surface. For low sputtering rate, GISAXS proves good sensitivity for gold migration inside the polymer film and opens new possibilities for studying polymer-metal interaction.