Morphology of Buried Interfaces in Ion-Assisted Magnetron Sputter-Deposited 11B4C-Containing Ni/Ti Multilayer Neutron Optics Investigated by Grazing-Incidence Small-Angle Scattering

Multilayer neutron optics require precise control of interface morphology for optimal performance. In this work, we investigate the effects of different growth conditions on the interface morphology of Ni/Ti-based multilayers, with a focus on incorporating low-neutron-absorbing 11B4C and using different ion assistance schemes. Grazing-incidence small-angle X-ray scattering was used to probe the structural and morphological details of buried interfaces, revealing that the layers become more strongly correlated and the interfaces form mounds with increasing amounts of 11B4C. Applying high flux ion assistance during growth can reduce mound formation but lead to interface mixing, while a high flux modulated ion assistance scheme with an initial buffer layer grown at low ion energy and the top layer at higher ion energy prevents intermixing. The optimal condition was found to be adding 26.0 atom % 11B4C combined with high flux modulated ion assistance. A multilayer with a period of 48.2 Å and 100 periods was grown under these conditions, and coupled fitting to neutron and X-ray reflectivity data revealed an average interface width of only 2.7 Å, a significant improvement over the current state-of-the-art commercial Ni/Ti multilayers. Overall, our study demonstrates that the addition of 11B4C and the use of high flux modulated ion assistance during growth can significantly improve the interface morphology of Ni/Ti multilayers, leading to improved neutron optics performance.

Fostering the Dense Packing of Halide Perovskite Quantum Dots through Binary-Disperse Mixing

Due to their versatile applications, perovskite quantum dot (PQD)-based optoelectrical devices have garnered significant research attention. However, the fundamental packing behavior of PQDs in thin films and its impact on the device performance remain relatively unexplored. Drawing inspiration from theoretical models concerning packing density with size mixtures, this study presents an effective strategy, namely, binary-disperse mixing, aimed at enhancing the packing density of PQD films. Comprehensive grazing-incidence small-angle X-ray characterization suggested that the PQD film consists of three phases: two monosize phases and one binary mixing phase. The volume fraction and population of the binary-size phase can be tuned by mixing an appropriate amount of large and small PQDs. Furthermore, we performed multi-length-scale all-atom and coarse-grained molecular dynamics simulations to elucidate the distribution and conformation of organic surface ligands, highlighting their influence on PQD packing. Notably, the mixing of two PQDs of different sizes promotes closer face-to-face contact. The densely packed binary-disperse film exhibited largely suppressed trap-assisted recombination, much longer carrier lifetime, and thereby improved power conversion efficiency. Hence, this study provides fundamental understanding of the packing mechanism of perovskite quantum dots and highlights the significance of packing density for PQD-based solar cells.

Strategy to simulate and fit 2D grazing-incidence small-angle X-ray scattering patterns of nanostructured thin films

Grazing-incidence small-angle X-ray scattering (GISAXS) is a widely used method for the characterization of the nanostructure of supported thin films and enables time-resolved in situ measurements. The 2D scattering patterns contain detailed information about the nanostructures within the film and at its surface. However, this information is distorted not only by the reflection of the X-ray beam at the substrate-film interface and its refraction at the film surface but also by scattering of the substrate, the sample holder and other types of parasitic background scattering. In this work, a new, efficient strategy to simulate and fit 2D GISAXS patterns that explicitly includes these effects is introduced and demonstrated for (i) a model case nanostructured thin film on a substrate and (ii) experimental data from a microphase-separated block copolymer thin film. To make the protocol efficient, characteristic linecuts through the 2D GISAXS patterns, where the different contributions dominate, are analysed. The contributions of the substrate and the parasitic background scattering - which ideally are measured separately - are determined first and are used in the analysis of the 2D GISAXS patterns of the nanostructured, supported film. The nanostructures at the film surface and within the film are added step by step to the real-space model of the simulation, and their structural parameters are determined by minimizing the difference between simulated and experimental scattering patterns in the selected linecuts. Although in the present work the strategy is adapted for and tested with BornAgain, it can be easily used with other types of simulation software. The strategy is also applicable to grazing-incidence small-angle neutron scattering.

Structural Characterization of Nanoparticle-Supported Lipid Bilayer Arrays by Grazing Incidence X-ray and Neutron Scattering

Arrays of nanoparticle-supported lipid bilayers (nanoSLB) are lipid-coated nanopatterned interfaces that provide a platform to study curved model biological membranes using surface-sensitive techniques. We combined scattering techniques with direct imaging, to gain access to sub-nanometer scale structural information on stable nanoparticle monolayers assembled on silicon crystals in a noncovalent manner using a Langmuir-Schaefer deposition. The structure of supported lipid bilayers formed on the nanoparticle arrays via vesicle fusion was investigated using a combination of grazing incidence X-ray and neutron scattering techniques complemented by fluorescence microscopy imaging. Ordered nanoparticle assemblies were shown to be suitable and stable substrates for the formation of curved and fluid lipid bilayers that retained lateral mobility, as shown by fluorescence recovery after photobleaching and quartz crystal microbalance measurements. Neutron reflectometry revealed the formation of high-coverage lipid bilayers around the spherical particles together with a flat lipid bilayer on the substrate below the nanoparticles. The presence of coexisting flat and curved supported lipid bilayers on the same substrate, combined with the sub-nanometer accuracy and isotopic sensitivity of grazing incidence neutron scattering, provides a promising novel approach to investigate curvature-dependent membrane phenomena on supported lipid bilayers.

Scalable Paper Supercapacitors for Printed Wearable Electronics

Printed paper-based electronics offers solutions to rising energy concerns by supplying flexible, environmentally friendly, low-cost infrastructure for portable and wearable electronics. Herein, we demonstrate a scalable spray-coating approach to fabricate tailored paper poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS)/cellulose nanofibril (CNF) electrodes for all-printed supercapacitors. Layer-by-layer spray deposition was used to achieve high-quality electrodes with optimized electrode thickness. The morphology of these electrodes was analyzed using advanced X-ray scattering methods, revealing that spray-coated electrodes have smaller agglomerations, resulting in a homogeneous film, ultimately suggesting a better electrode manufacturing method than drop-casting. The printed paper-based supercapacitors exhibit an areal capacitance of 9.1 mF/cm², which provides enough energy to power electrochromic indicators. The measured equivalent series resistance (ESR) is as low as 0.3 Ω, due to improved contact and homogeneous electrodes. In addition, a demonstrator in the form of a self-powered wearable wristband is shown, where a large-area (90 cm²) supercapacitor is integrated with a flexible solar cell and charged by ambient indoor light. This demonstration shows the tremendous potential for sequential coating/printing methods in the scaling up of printed wearables and self-sustaining systems.

Surface Morphology of Textured Transparent Conductive Oxide Thin Film Seen by Various Probes: Visible Light, X-rays, Electron Scattering and Contact Probe

Fluorine-doped tin oxide thin films (SnO₂:F) are widely used as transparent conductive oxide electrodes in thin-film solar cells because of their appropriate electrical and optical properties. The surface morphology of these films influences their optical properties and therefore plays an important role in the overall efficiencies of the solar cells in which they are implemented. At rough surfaces light is diffusely scattered, extending the optical path of light inside the active layer of the solar cell, which in term improves light absorption and solar cell conversion efficiency. In this work, we investigated the surface morphology of undoped and doped SnO₂ thin films and their influence on the optical properties of the films. We have compared and analysed the results obtained by several complementary methods for thin-film surface morphology investigation: atomic force microscopy (AFM), transmission electron microscopy (TEM), and grazing-incidence small-angle X-ray scattering (GISAXS). Based on the AFM and TEM results we propose a theoretical model that reproduces well the GISAXS scattering patterns.

Correlating Optical Reflectance with the Topology of Aluminum Nanocluster Layers Growing on Partially Conjugated Diblock Copolymer Templates

Large-scale fabrication of metal cluster layers for usage in sensor applications and photovoltaics is a huge challenge. Physical vapor deposition offers large-scale fabrication of metal cluster layers on templates and polymer surfaces. In the case of aluminum (Al), only little is known about the formation and interaction of Al clusters during sputter deposition. Complex polymer surface morphologies can tailor the deposited Al cluster layer. Here, a poly(methyl methacrylate)-block-poly(3-hexylthiophen-2,5-diyl) (PMMA-b-P3HT) diblock copolymer template is used to investigate the nanostructure formation of Al cluster layers on the different polymer domains and to compare it with the respective homopolymers PMMA and P3HT. The optical properties relevant for sensor applications are monitored with ultraviolet-visible (UV-vis) measurements during the sputter deposition. The formation of Al clusters is followed in situ with grazing-incidence small-angle X-ray scattering (GISAXS), and the chemical interaction is revealed by X-ray photoelectron spectroscopy (XPS). Furthermore, atomic force microscopy (AFM) and field emission scanning electron microscopy (FESEM) yield topographical information about selective wetting of Al on the P3HT domains and embedding in the PMMA domains in the early stages, followed by four distinct growth stages describing the Al nanostructure formation.

Correlation of Thermoelectric Performance, Domain Morphology and Doping Level in PEDOT:PSS Thin Films Post-Treated with Ionic Liquids

Ionic liquid (IL) post-treatment of poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) thin films with ethyl-3-methylimidazolium dicyanamide (EMIM DCA), allyl-3-methylimidazolium dicyanamide (AMIM DCA), and 1-ethyl-3-methylimidazolium tetracyanoborate (EMIM TCB) is compared. Doping level modifications of PEDOT are characterized using UV-Vis spectroscopy and directly correlate with the observed Seebeck coefficient enhancement. With conductive atomic force microscopy (c-AFM) the authors investigate changes in the topographic-current features of the PEDOT:PSS thin film surface due to IL treatment. Grazing incidence small-angle X-ray scattering (GISAXS) demonstrates the morphological rearrangement towards an optimized PEDOT domain distribution upon IL post-treatment, directly facilitating the interconductivity and causing an increased film conductivity. Based on these improvements in Seebeck coefficient and conductivity, the power factor is increased up to 236 µW m^-1 K^{- 2} . Subsequently, a model is developed indicating that ILs, which contain small, sterically unhindered ions with a strong localized charge, appear beneficial to boost the thermoelectric performance of post-treated PEDOT:PSS films.

Wafer-Scale Unidirectional Alignment of Supramolecular Columns on Faceted Surfaces

The long-range alignment of supramolecular structures must be engineered as a first step toward advanced nanopatterning processes aimed at miniaturizing features to dimensions below 5 nm. This study introduces a facile method of directing the orientation of supramolecular columns over wafer-scale areas using faceted surfaces. Supramolecular columns with features on the sub-5 nm scale were highly aligned in a direction orthogonal to that of the facet patterning on unidirectional and nanoscopic faceted surface patterns. This unidirectional alignment of supramolecular columns is also observed by varying the thickness of the supramolecular film or by altering the dimensions of the facet pattern. The ordering behavior of the supramolecular columns can be attributed to the triangular depth profile of the bottom facet pattern. Furthermore, this directed self-assembly principle allows for the continuous alignment of supramolecular structures across ultralarge distances on flexible patterned substrates.

Bioinspired Antimicrobial Coatings from Peptide-Functionalized Liquid Crystalline Nanostructures

Surface-associated microbial infections and contaminations are a major challenge in various fields including the food and health sectors. This study demonstrates the design of antimicrobial coatings based on the self-assembly of the food-grade amphiphilic lipid glycerol monooleate with the human cathelicidin-derived antimicrobial peptide LL-37. Structural properties of the coating and their alterations with composition were studied using advanced experimental methods including synchrotron grazing-incidence small-angle X-ray scattering and ellipsometry. The integration of the LL-37 and its potential release from the nanostructured films into the surrounding solution was characterized with confocal Raman microscopy. Additional biological evaluation studies with clinically relevant bacterial strains, namely, Pseudomonas aeruginosa (Gram-negative) and Staphylococcus aureus (Gram-positive), were performed to investigate the antimicrobial activity of the coatings. Significant killing activity of the coating was found against both bacterial strains. The presented findings contribute to the fundamental understanding of lipid-peptide self-assembly on the surface and may open up a promising strategy for designing simple, sustainable antimicrobial coatings for medical and food applications.

Improved thermal stability of antireflective moth-eye topography imprinted on PMMA/TiO2surface nanocomposites

The thermal stability of antireflective moth-eye topographical features fabricated by nanoimprint lithography on poly (methyl methacrylate) (PMMA) incorporating TiO₂nanoparticles is explored. The effect of nanoparticle load on the relaxation dynamics of the moth-eye nanostructure is evaluated via grazing incidence small angle x-ray scattering measurements byin situmonitoring the structural decay of the nanopatterns upon thermal annealing. It is demonstrated that the incorporation of TiO₂nanoparticles to the imprinted surface nanocomposite films delays greatly the pattern relaxation which, in turn, enhances the stability of the patterned topography even at temperatures well above the polymer glass transition (T_g). The improved thermal behavior of the antireflective films will significantly enhance their functionality and performance in light-trapping applications where temperatures typically rise, such as solar devices or solar glass panels.

Stress-Assisted Thermal Diffusion Barrier Breakdown in Ion Beam Deposited Cu/W Nano-Multilayers on Si Substrate Observed by in Situ GISAXS and Transmission EDX

The thermal stability of Cu/W nano-multilayers deposited on a Si substrate using ion beam deposition was analyzed in situ by GISAXS and transmission EDX-a combination of methods permitting the observation of diffusion processes within buried layers. Further supporting techniques such as XRR, TEM, WAXS, and AFM were employed to develop an extensive microstructural understanding of the multilayer before and during heating. It was found that the pronounced in-plane compressive residual stress and defect population induced by ion beam deposition result in low thermal stability driven by thermally activated self-interstitial and vacancy diffusion, ultimately leading to complete degradation of the layered structure at moderate temperatures. The formation of Cu protrusions was observed, and a model was formulated for stress-assisted Cu diffusion driven by Coble creep along W grain boundaries, along with the interaction with Si substrate, which showed excellent agreement with the observed experimental data. The model provided the explanation for the experimentally observed strong correlation between thin film deposition conditions, microstructural properties, and low thermal stability that can be applied to other multilayer systems.

Structural, Optical and Electrical Properties of Al+MoO3 and Au+MoO3 Thin Films Prepared by Magnetron Codeposition

Structural, optical and electrical properties of Al+MoO₃ and Au+MoO₃ thin films prepared by simultaneous magnetron sputtering deposition were investigated. The influence of MoO₃ sputtering power on the Al and Au nanoparticle formation and spatial distribution was explored. We demonstrated the formation of spatially arranged Au nanoparticles in the MoO₃ matrix, while Al incorporates in the MoO₃ matrix without nanoparticle formation. The dependence of the Au nanoparticle size and arrangement on the MoO₃ sputtering power was established. The Al-based films show a decrease of overall absorption with an Al content increase, while the Au-based films have the opposite trend. The transport properties of the investigated films also are completely different. The resistivity of the Al-based films increases with the Al content, while it decreases with the Au content increase. The reason is a different transport mechanism that occurs in the films due to their different structural properties. The choice of the incorporated material (Al or Au) and its volume percentage in the MoO₃ matrix enables the design of materials with desirable optical and electrical characteristics for a variety of applications.

Small-angle X-ray scattering from GaN nanowires on Si(111): facet truncation rods, facet roughness and Porod's law

Small-angle X-ray scattering from GaN nanowires grown on Si(111) is measured in the grazing-incidence geometry and modelled by means of a Monte Carlo simulation that takes into account the orientational distribution of the faceted nanowires and the roughness of their side facets. It is found that the scattering intensity at large wavevectors does not follow Porod's law I(q) ∝ q-4. The intensity depends on the orientation of the side facets with respect to the incident X-ray beam. It is maximum when the scattering vector is directed along a facet normal, reminiscent of surface truncation rod scattering. At large wavevectors q, the scattering intensity is reduced by surface roughness. A root-mean-square roughness of 0.9 nm, which is the height of just 3-4 atomic steps per micrometre-long facet, already gives rise to a strong intensity reduction.

Study on the Microstructure of Polyether Ether Ketone Films Irradiated with 170 keV Protons by Grazing Incidence Small Angle X-ray Scattering (GISAXS) Technology

Polyether ether ketone (PEEK) films irradiated with 170 keV protons were calculated by the stopping and ranges of ions in matter (SRIM) software. The results showed that the damage caused by 170 keV protons was only several microns of the PEEK surface, and the ionization absorbed dose and displacement absorbed dose were calculated. The surface morphology and roughness of PEEK after proton irradiation were studied by atomic force microscope (AFM). GISAXS was used to analyze the surface structural information of the pristine and irradiated PEEK. The experimental results showed that near the surface of the pristine and irradiated PEEK exists a peak, and the peak gradually disappeared with the increasing of the angles of incidence and the peak changed after irradiation, which implies the 170 keV protons have an effect on PEEK structure. The influences of PEEK irradiated with protons on the melting temperature and crystallization temperature was investigated by differential scanning calorimetry (DSC). The DSC results showed that the crystallinity of the polymer after irradiation decreased. The structure and content of free radicals of pristine and irradiated PEEK were studied by Fourier transform infrared spectroscopy (FTIR) and electron paramagnetic resonance (EPR). The stress and strain test results showed that the yield strength of the PEEK irradiated with 5 × 10¹⁵ p/cm² and 1 × 10¹⁶ p/cm² was higher than the pristine, but the elongation at break of the PEEK irradiated with 5 × 10¹⁵ p/cm² and 1 × 10¹⁶ p/cm² decreased obviously.

Contribution of Ex-Situ and In-Situ X-ray Grazing Incidence Scattering Techniques to the Understanding of Quantum Dot Self-Assembly: A Review

Quantum dots are under intense research, given their amazing properties which favor their use in electronics, optoelectronics, energy, medicine and other important applications. For many of these technological applications, quantum dots are used in their ordered self-assembled form, called superlattice. Understanding the mechanism of formation of the superlattices is crucial to designing quantum dots devices with desired properties. Here we review some of the most important findings about the formation of such superlattices that have been derived using grazing incidence scattering techniques (grazing incidence small and wide angle X-ray scattering (GISAXS/GIWAXS)). Acquisition of these structural information is essential to developing some of the most important underlying theories in the field.

Effects of Methyl Terminal and Carbon Bridging Groups Ratio on Critical Properties of Porous Organosilicate-Glass Films

Organosilicate glass-based porous low dielectic constant films with different ratios of terminal methyl to bridging organic (methylene, ethylene and 1,4-phenylene) groups are spin-on deposited by using a mixture of alkylenesiloxane with organic bridges and methyltrimethoxysilane, followed by soft baking at 120-200 °C and curing at 430 °C. The films' porosity was controlled by using sacrificial template Brij^® L4. Changes of the films' refractive indices, mechanical properties, k-values, porosity and pore structure versus chemical composition of the film's matrix are evaluated and compared with methyl-terminated low-k materials. The chemical resistance of the films to annealing in oxygen-containing atmosphere is evaluated by using density functional theory (DFT). It is found that the introduction of bridging groups changes their porosity and pore structure, increases Young's modulus, but the improvement of mechanical properties happens simultaneously with the increase in the refractive index and k-value. The 1,4-phenylene bridging groups have the strongest impact on the films' properties. Mechanisms of oxidative degradation of carbon bridges are studied and it is shown that 1,4-phenylene-bridged films have the highest stability. Methylene- and ethylene-bridged films are less stable but methylene-bridged films show slightly higher stability than ethylene-bridged films.

Self-assembly of block copolymers under non-isothermal annealing conditions as revealed by grazing-incidence small-angle X-ray scattering

An accurate knowledge of the parameters governing the kinetics of block copolymer self-assembly is crucial to model the time- and temperature-dependent evolution of pattern formation during annealing as well as to predict the most efficient conditions for the formation of defect-free patterns. Here, the self-assembly kinetics of a lamellar PS-b-PMMA block copolymer under both isothermal and non-isothermal annealing conditions are investigated by combining grazing-incidence small-angle X-ray scattering (GISAXS) experiments with a novel modelling methodology that accounts for the annealing history of the block copolymer film before it reaches the isothermal regime. Such a model allows conventional studies in isothermal annealing conditions to be extended to the more realistic case of non-isothermal annealing and prediction of the accuracy in the determination of the relevant parameters, namely the correlation length and the growth exponent, which define the kinetics of the self-assembly.

Classification of grazing-incidence small-angle X-ray scattering patterns by convolutional neural network

Grazing-incidence small-angle X-ray scattering (GISAXS) patterns have multiple superimposed contributions from the shape of the nanoscale structure, the coupling between the particles, the partial pair correlation, and the layer geometry. Therefore, it is not easy to identify the model manually from the huge amounts of combinations. The convolutional neural network (CNN), which is one of the artificial neural networks, can find regularities to classify patterns from large amounts of combinations. CNN was applied to classify GISAXS patterns, focusing on the shape of the nanoparticles. The network found regularities from the GISAXS patterns and showed a success rate of about 90% for the classification. This method can efficiently classify a large amount of experimental GISAXS patterns according to a set of model shapes and their combinations.

Porous Ultra-Thin Films from Photocleavable Block Copolymers: In-Situ Degradation Kinetics Study of Pore Material

On the basis of the major application for block copolymers to use them as separation membranes, lithographic mask, and as templates, the preparation of highly oriented nanoporous thin films requires the selective removal of the minor phase from the pores. In the scope of this study, thin film of polystyrene-block-poly(ethylene oxide) block copolymer with a photocleavable junction groups based on ortho-nitrobenzylester (ONB) (PS-hν-PEO) was papered via the spin coating technique followed by solvent annealing to obtain highly-ordered cylindrical domains. The polymer blocks are cleaved by means of a mild UV exposure and then the pore material is washed out of the polymer film by ultra-pure water resulting in arrays of nanoporous thin films to remove one block. The removal of the PEO materials from the pores was proven using the grazing-incidence small-angle X-ray scattering (GISAXS) technique. The treatment of the polymer film during the washing process was observed in real time after two different UV exposure time (1 and 4 h) in order to draw conclusions regarding the dynamics of the removal process. In-situ X-ray reflectivity measurements provide statistically significant information about the change in the layer thickness as well as the roughness and electron density of the polymer film during pore formation. 4 H UV exposure was found to be more efficient for PEO cleavage. By in-situ SFM measurements, the structure of the ultra-thin block copolymer films was also analysed and, thus, the kinetics of the washing process was elaborated. The results from both measurements confirmed that the washing procedure induces irreversible change in morphology to the surface of the thin film.

Self-Assembly of Large Magnetic Nanoparticles in Ultrahigh Molecular Weight Linear Diblock Copolymer Films

The development of diblock copolymer (DBC) nanocomposite films containing magnetic nanoparticles (NPs) with diameters (D) over 20 nm is a challenging task. To host large iron oxide NPs (Fe₃O₄, D = 27 ± 0.6 nm), an ultrahigh molecular weight (UHMW) linear DBC polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) is used as a template in the present work. Due to hydrogen bonding between the carboxylic acid ligands of the NPs and the ester groups in PMMA, the NPs show an affinity to the PMMA block. The localization of the NPs inside the DBC is investigated as a function of the NP concentration. At low NP concentrations, NPs are located preferentially at the interface between PS and PMMA domains to minimize the interfacial tension caused by the strong segregation strength of the UHMW DBC. At high NP concentrations (≥10 wt %), chain-like NP aggregates (a head-to-tail orientation) are observed in the PMMA domains, resulting in a change of the morphology from sphere to ellipsoid for part of the PMMA domains. Magnetic properties of the hybrid films are probed via superconducting quantum interference device magnetometry. All hybrid films show ferrimagnetism and are promising for potential applications in magnetic data storage.

Synchrotron Scattering Methods for Nanomaterials and Soft Matter Research

This article aims to provide an overview of broad range of applications of synchrotron scattering methods in the investigation of nanoscale materials. These scattering techniques allow the elucidation of the structure and dynamics of nanomaterials from sub-nm to micron size scales and down to sub-millisecond time ranges both in bulk and at interfaces. A major advantage of scattering methods is that they provide the ensemble averaged information under in situ and operando conditions. As a result, they are complementary to various imaging techniques which reveal more local information. Scattering methods are particularly suitable for probing buried structures that are difficult to image. Although, many qualitative features can be directly extracted from scattering data, derivation of detailed structural and dynamical information requires quantitative modeling. The fourth-generation synchrotron sources open new possibilities for investigating these complex systems by exploiting the enhanced brightness and coherence properties of X-rays.

Structural Characterization of Mesoporous Thin Film Architectures: A Tutorial Overview

Mesoporous thin film architectures are an important class of materials that exhibit unique properties, which include high surface area, versatile surface functionalization, and bicontinuous percolation paths through a broad library of pore arrangements on the 10 nm length scale. Although porosimetry of bulk materials via sorption techniques is common practice, the characterization of thin mesoporous films with small sample volumes remains a challenge. A range of techniques are geared toward providing information over pore morphology, pore size distribution, surface area and overall porosity, but none of them offers a holistic evaluation and results are at times inconsistent. In this work, we present a tutorial overview for the reliable structural characterization of mesoporous films. Three model samples with variable pore size and porosity prepared by block copolymer (BCP) coassembly serve for a rational comparison. Various techniques are assessed side-by-side, including scanning electron microscopy (SEM), atomic force microscopy (AFM), grazing incidence small-angle X-ray scattering (GISAXS), and ellipsometric porosimetry (EP). We critically discuss advantages and limitations of each technique and provide guidelines for reliable implementation.

Following in Situ the Deposition of Gold Electrodes on Low Band Gap Polymer Films

Metal top electrodes such as gold are widely used in organic solar cells. The active layer can be optimized by modifications of the polymer band gap via side-chain engineering, and low band gap polymers based on benzodithiophene units such as PTB7 and PTB7-Th are successfully used. The growth of gold contacts on PTB7 and PTB7-Th films is investigated with in situ grazing incidence small-angle X-ray scattering (GISAXS) and grazing incidence wide-angle X-ray scattering (GIWAXS) during the sputter deposition of gold. From GIWAXS, the crystal structure of the gold film is determined. Independent of the type of side chain, gold crystals form in the very early stages and improve in quality during the sputter deposition until the late stages. From GISAXS, the nanoscale structure is determined. Differences in terms of gold cluster size and growth phase limits for the two polymers are caused by the side-chain modification and result in a different surface coverage in the early phases. The changes in the diffusion and coalescence behavior of the forming gold nanoparticles cause differences in the morphology of the gold contact in the fully percolated regime, which is attributed to the different amount of thiophene rings of the side chains acting as nucleation sites.

Mechanistic Insights into the Effect of Polymer Regioregularity on the Thermal Stability of Polymer Solar Cells

Thermal stability is a bottleneck toward commercialization of polymer solar cells (PSCs). The effect of PCBM aggregation on a multilength scale on the bulk-heterojunction (BHJ) structure, performance, and thermal stability of PSCs is studied here by grazing-incidence small- and wide-angle X-ray scattering. The evolution of hierarchical BHJ structures of a blend film tuned by regioregularity of polymers from the as-cast state to the thermally unstable state is systematically investigated. The thermal stability of PSCs with high polymer regioregularity values can be improved because of the good mutual interaction between polymer crystallites and fullerene aggregates. The insights obtained from this study provide an approach to manipulate the film structure on a multilength scale and to enhance the thermal stability of P3HT-based PSCs.

Structure-Function Correlations in Sputter Deposited Gold/Fluorocarbon Multilayers for Tuning Optical Response

A new strategy to nanoengineer gold/fluorocarbon multilayer (ML) nanostructures is reported. We have investigated the morphological changes occurring at the metal-polymer interface in ML structures with varying volume fraction of gold (Au) and the kinetic growth aspect of the microscale properties of nano-sized Au in plasma polymer fluorocarbon (PPFC). Investigations were carried out at various temperatures and annealing times by means of grazing incidence small-angle and wide-angle X-ray scattering (GISAXS and GIWAXS). We have fabricated a series of MLs with varying volume fraction (0.12, 0.27, 0.38) of Au and bilayer periodicity in ML structure. They show an interesting granular structure consisting of nearly spherical nanoparticles within the polymer layer. The nanoparticle (NP) morphology changes due to the collective effects of NPs diffusion within ensembles in the in-plane vicinity and interlayer with increasing temperature. The in-plane NPs size distinctly increases with increasing temperature. The NPs become more spherical, thus reducing the surface energy. Linear growth of NPs with temperature and time shows diffusion-controlled growth of NPs in the ML structure. The structural stability of the multilayer is controlled by the volume ratio of the metal in polymer. At room temperature, UV-Vis shows a blue shift of the plasmon peak from 560 nm in ML Au/PTFE_1 to 437 nm in Au/PTFE_3. We have identified the fabrication and postdeposition annealing conditions to limit the local surface plasmon resonance (LSPR) shift from Δ λ L S P R = 180 nm (Au/PTFE_1) to Δ λ L S P R = 67 nm (Au/PTFE_3 ML)) and their optical response over a wide visible wavelength range. A variation in the dielectric constant of the polymer in presence of varying Au inclusion is found to be a possible factor affecting the LSPR frequency. Our findings may provide insights in nanoengineering of ML structure that can be useful to systematically control the growth of NPs in polymer matrix.

Correlating Nanostructure, Optical and Electronic Properties of Nanogranular Silver Layers during Polymer-Template-Assisted Sputter Deposition

Tailoring the optical and electronic properties of nanostructured polymer-metal composites demonstrates great potential for efficient fabrication of modern organic optical and electronic devices such as flexible sensors, transistors, diodes, or photovoltaics. Self-assembled polymer-metal nanocomposites offer an excellent perspective for creating hierarchical nanostructures on macroscopic scales by simple bottom-up processes. We investigate the growth processes of nanogranular silver (Ag) layers on diblock copolymer thin film templates during sputter deposition. The Ag growth is strongly driven by self-assembly and selective wetting on the lamella structure of polystyrene-block-poly(methyl methacrylate). We correlate the emerging nanoscale morphologies with collective optical and electronic properties and quantify the difference in Ag growth on the corresponding homopolymer thin films. Thus, we are able to determine the influence of the respective polymer template and observe substrate effects on the Ag cluster percolation threshold, which affects the insulator-to-metal transition (IMT). Optical spectroscopy in the UV-vis regime reveals localized surface plasmon resonance for the metal-polymer composite. Their maximum absorption is observed around the IMT due to the subsequent long-range electron conduction in percolated nanogranular Ag layers. Using X-ray photoelectron spectroscopy and Fourier-transform infrared spectroscopy, we identify the oxidation of Ag at the acrylate side chains as an essential influencing factor driving the selective wetting behavior in the early growth stages. The results of polymer-templated cluster growth are corroborated by atomic force microscopy and field emission scanning electron microscopy.

Printed Thin Diblock Copolymer Films with Dense Magnetic Nanostructure

Thin hybrid films with dense magnetic structures for sensor applications are printed using diblock copolymer (DBC) templating magnetic nanoparticles (MNPs). To achieve a high-density magnetic structure, the printing ink is prepared by mixing polystyrene- block-poly(methyl methacrylate) (PS- b-PMMA) with a large PS volume fraction and PS selective MNPs. Solvent vapor annealing is applied to generate a parallel cylindrical film morphology (with respect to the substrate), in which the MNP-residing PS domains are well separated by the PMMA matrix, and thus, the formation of large MNP agglomerates is avoided. Moreover, the morphologies of the printed thin films are determined as a function of the MNP concentration with real and reciprocal space characterization techniques. The PS domains are found to be saturated with MNPs at 1 wt %, at which the structural order of the hybrid films reaches a maximum within the studied range of MNP concentration. As a beneficial aspect, the MNP loading improves the morphological order of the thin DBC films. The dense magnetic structure endows the thin films with a faster superparamagnetic responsive behavior, as compared to thick films where identical MNPs are used, but dispersed inside the minority domains of the DBC.

Unwarping GISAXS data

Grazing-incidence small-angle X-ray scattering (GISAXS) is a powerful technique for measuring the nanostructure of coatings and thin films. However, GISAXS data are plagued by distortions that complicate data analysis. The detector image is a warped representation of reciprocal space because of refraction, and overlapping scattering patterns appear because of reflection. A method is presented to unwarp GISAXS data, recovering an estimate of the true undistorted scattering pattern. The method consists of first generating a guess for the structure of the reciprocal-space scattering by solving for a mutually consistent prediction from the transmission and reflection sub-components. This initial guess is then iteratively refined by fitting experimental GISAXS images at multiple incident angles, using the distorted-wave Born approximation (DWBA) to convert between reciprocal space and detector space. This method converges to a high-quality reconstruction for the undistorted scattering, as validated by comparing with grazing-transmission scattering data. This new method for unwarping GISAXS images will broaden the applicability of grazing-incidence techniques, allowing experimenters to inspect undistorted visualizations of their data and allowing a broader range of analysis methods to be applied to GI data.

A corrective prescription for GISAXS

A new 'unwarping' algorithm presented by Liu and Yager in this issue constructs SAXS data consistent with experimental GISAXS data, eliminating many of the complications arising in GISAXS that are commonly modeled within the framework of the distorted-wave Born approximation. The method promises to open new pathways for processing, modeling and analyzing GISAXS data using techniques developed for SAXS.

Flexible sample cell for real-time GISAXS, GIWAXS and XRR: design and construction

Since the properties of functional materials are highly dependent on their specific structure, and since the structural changes, for example during crystallization, induced by coating and annealing processes are significant, the study of structure and its formation is of interest for fundamental and applied science. However, structure analysis is often limited to ex situ determination of final states due to the lack of specialized sample cells that enable real-time investigations. The lack of such cells is mainly due to their fairly complex design and geometrical restrictions defined by the beamline setups. To overcome this obstacle, an advanced sample cell has been designed and constructed; it combines automated doctor blading, solvent vapor annealing and sample hydration with real-time grazing-incidence wide- and small-angle scattering (GIWAXS/GISAXS) and X-ray reflectivity (XRR). The sample cell has limited spatial requirements and is therefore widely usable at beamlines and laboratory-scale instruments. The cell is fully automatized and remains portable, including the necessary electronics. In addition, the cell can be used by interested scientists in cooperation with the Institute for Crystallography and Structural Physics and is expandable with regard to optical secondary probes. Exemplary research studies are presented, in the form of coating of P3HT:PC₆₁PM thin films, solvent vapor annealing of DRCN5T:PC₇₁BM thin films, and hydration of supported phospholipid multilayers, to demonstrate the capabilities of the in situ cell.

Xi-cam: a versatile interface for data visualization and analysis

Xi-cam is an extensible platform for data management, analysis and visualization. Xi-cam aims to provide a flexible and extensible approach to synchrotron data treatment as a solution to rising demands for high-volume/high-throughput processing pipelines. The core of Xi-cam is an extensible plugin-based graphical user interface platform which provides users with an interactive interface to processing algorithms. Plugins are available for SAXS/WAXS/GISAXS/GIWAXS, tomography and NEXAFS data. With Xi-cam's `advanced' mode, data processing steps are designed as a graph-based workflow, which can be executed live, locally or remotely. Remote execution utilizes high-performance computing or de-localized resources, allowing for the effective reduction of high-throughput data. Xi-cam's plugin-based architecture targets cross-facility and cross-technique collaborative development, in support of multi-modal analysis. Xi-cam is open-source and cross-platform, and available for download on GitHub.

Erratum: Grazing-incidence small-angle X-ray scattering (GISAXS) on small periodic targets using large beams. Erratum

[This corrects the article DOI: 10.1107/S2052252517006297.].

Tuning of the Morphology and Optoelectronic Properties of ZnO/P3HT/P3HT- b-PEO Hybrid Films via Spray Deposition Method

The self-assembly of amphiphilic diblock copolymers yields the possibility of using them as a template for tailoring the film morphologies of sol-gel chemistry-derived inorganic electron transport materials, such as mesoporous ZnO and TiO₂. However, additional steps including etching and backfilling are required for the common bulk heterojunction fabrication process when using insulating diblock copolymers. Here, we use the conducting diblock copolymer poly(3-hexylthiophene)- block-poly(ethylene oxide) (P3HT- b-PEO) in which P3HT acts as charge carrier transport material and light absorber, whereas PEO serves as a template for ZnO synthesis. The initial solution is subsequently spray-coated to obtain the hybrid film. Scanning electron microscopy and grazing-incidence small-angle X-ray scattering measurements reveal a significant change in the morphology of the hybrid films during deposition. Optoelectronic properties illustrate the improved charge separation and charge transfer process. Both the amount of the diblock copolymer and the annealing temperature play an important role in tuning the morphology and the optoelectronic properties. Hybrid films being sprayed from a solution with the ratio of ω_ZnO, ω_P3HT, and ω_{P3HT- b-PEO} of 2:1:1 and subsequent annealing at 80 °C show the most promising morphology combined with an optimal photoluminescence quenching. Thus, the presented simple, reagent- and energy-saving fabrication method provides a promising approach for a large-scale preparation of bulk heterojunction P3HT/ZnO films on flexible substrates.

Real-Time Probing of Nanowire Assembly Kinetics at the Air-Water Interface by In Situ Synchrotron X-Ray Scattering

Although many assembly strategies have been used to successfully construct well-aligned nanowire (NW) assemblies, the understanding of their assembly kinetics has remained elusive, which restricts the development of NW-based device and circuit fabrication. Now a versatile strategy that combines interfacial assembly and synchrotron-based grazing-incidence small-angle X-ray scattering (GISAXS) is presented to track the assembly evolution of the NWs in real time. During the interface assembly process, the randomly dispersed NWs gradually aggregate to form small ordered NW-blocks and finally are constructed into well-defined NW monolayer driven by the conformation entropy. The NW assembly mechanism can be well revealed by the thermodynamic analysis and large-scale molecular dynamics theoretical evaluation. These findings point to new opportunities for understanding NW assembly kinetics and manipulating NW assembled structures by bottom-up strategy.

In Situ Synthesis of Ternary Block Copolymer/Homopolymer Blends for Organic Photovoltaics

A detailed investigation of in situ-synthesized all-conjugated block copolymer (BCP) compatibilized ternary blends containing poly(3-hexylthiophene) (P3HT) and poly{[ N, N'-bis(2-octyldodecyl)naphthalene-1,4,5,8-bis(dibcarboximide)-2,6-diyl]- alt-5,5'-(2,2'-bithiophene)} (PNDIT2) as donor and acceptor polymers, respectively, is presented. Both polymers are incompatible and show strong segregation in blends, which renders compatibilization with their corresponding BCPs promising to enable nanometer-phase-separated structures suitable for excitonic devices. Here, we synthesize a ternary block copolymer/homopolymer blend system and investigate the phase behavior as a function of block copolymer molecular weight and different annealing conditions. The device performance decreases on increasing annealing temperatures. To understand this effect, morphological investigations including atomic force microscopy, high-resolution transmission electron microscopy (HR-TEM), and grazing incidence wide- and small-angle X-ray scattering (GIWAXS/GISAXS) are carried out. On comparing domain sizes of pristine and compatibilized blends obtained from GISAXS, a weak compatibilization effect appears to take place for the in situ-synthesized ternary systems. The effect of thermal annealing is most prevalent for all samples, which, for the highest annealing temperature above the melting point of PNDIT2 (310 °C), ultimately leads to a change from the face-on to edge-on orientation of PNDIT2, as seen in GIWAXS. This effect dominates and decreases all photovoltaic parameters, irrespective of whether a pristine or compatibilized blend is used.

Lateral Order and Self-Organized Morphology of Diblock Copolymer Micellar Films

We report the lateral order and self-organized morphology of diblock copolymer polystyrene-block-poly(2-vinylpyridine), P(S-b-2VP), and micelles on silicon substrates (SiOx/Si). These micellar films were prepared by spin coating from polymer solutions of varied concentration of polymer in toluene onto SiOx/Si, and were investigated with grazing-incidence small-angle X-ray scattering (GISAXS) and an atomic force microscope (AFM). With progressively increased surface coverage with increasing concentration, loosely packed spherical micelles, ribbon-like nanostructures, and a second layer of spherical micelles were obtained sequentially. Quantitative analysis and simulations of the micellar packing demonstrates that the spatial ordering of the loosely packed spherical micelles altered from short-range order to hexagonal order when the micellar coverage increased from small to moderate densities of the covered surface. At large densities, anisotropic fusion between spherical micelles caused the ribbon-like nanostructures to have a short-range spatial order; the ordering quality of the second layer was governed by the rugged surface of the underlying layer because the valleys between the ribbon-like nanostructures allowed for further deposition of spherical micelles.

Coordinated Responsive Arrays of Surface-Linked Polymer Islands-CORALs

The concept of co-ordinated responsive arrays of surface-linked islands (polymer CORALs) is introduced. This study targets a responsive system capable of revealing or covering the substrate surface in response to environmental changes in a reversible way. A convenient method of fabrication of polymer CORALs is proposed. It is based on microphase separation that occurs in thin films of supramolecular assemblies of block copolymers with reactive blocks. Such blocks form nanometer-size domains that may serve as anchors for surface-linked polymer islands. Two characteristics of the islands are critically important for the switching function: high grafting density within the islands and small lateral separation that allows interactions between polymer chains grafted to the neighboring islands. This combination permits complete coverage of the substrate surface upon exposure to a good solvent (relaxed state). In a weak solvent, the chains collapse within the islands, thus revealing the substrate (compact state). The morphology of the CORALs in both states and some details of the switching process were studied with atomic force microscopy, grazing incidence small-angle scattering, and coarse-grained molecular dynamic simulations.

Printed Thin Magnetic Films Based on Diblock Copolymer and Magnetic Nanoparticles

Printing techniques have been well established for large-scale production and have developed to be effective in controlling the morphology and thickness of the film. In this work, printing is employed to fabricate magnetic thin films composed of polystyrene coated maghemite nanoparticles (γ-Fe₂O₃ NPs) and polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) diblock copolymer. By applying an external magnetic field during the print coating step, oriented structures with a high content of nanoscale magnetic particles are created. The morphology of the magnetic films and the arrangement of NPs within the polymer matrix are characterized with real and reciprocal space techniques. Due to the applied magnetic field, the magnetic NPs self-assemble into microscale sized wires with controlled widths and separation distances, endowing hybrid films with a characteristic magnetic anisotropy. At the nanoscale level, due to the PS coating, the NPs disperse as single particles at low NP concentrations. The NPs self-assemble into nanosized clusters inside the PS domains when the NP concentration increases. Due to a high loading of uniformly dispersed magnetic NPs across the whole printed film, a strong sensitivity to an external magnetic field is achieved. The enhanced superparamagnetic property of the printed films renders them promising candidate materials for future magnetic sensor applications.

Reconstitution of SNARE proteins into solid-supported lipid bilayer stacks and X-ray structure analysis

SNAREs are known as an important family of proteins mediating vesicle fusion. For various biophysical studies, they have been reconstituted into supported single bilayers via proteoliposome adsorption and rupture. In this study we extended this method to the reconstitution of SNAREs into supported multilamellar lipid membranes, i.e. oriented multibilayer stacks, as an ideal model system for X-ray structure analysis (X-ray reflectivity and diffraction). The reconstitution was implemented through a pathway of proteomicelle, proteoliposome and multibilayer. To monitor the structural evolution in each step, we used small-angle X-ray scattering for the proteomicelles and proteoliposomes, followed by X-ray reflectivity and grazing-incidence small-angle scattering for the multibilayers. Results show that SNAREs can be successfully reconstituted into supported multibilayers, with high enough orientational alignment for the application of surface sensitive X-ray characterizations. Based on this protocol, we then investigated the effect of SNAREs on the structure and phase diagram of the lipid membranes. Beyond this application, this reconstitution protocol could also be useful for X-ray analysis of many further membrane proteins.

Periodic Mesoporous Organosilica Films with a Tunable Steady-State Mesophase

The mesophase formation in spin-coated periodic mesoporous organosilica (PMO) films aged at a controlled ambient humidity is investigated by time-resolved grazing-incidence small-angle X-ray scattering (GISAXS). The investigation demonstrates the existence of a tunable steady state in PMO spin-coated films. Thus, a film deposited at a relative humidity of 20 % has a lamellar mesophase, whereas a subsequent increase to 70 % leads to a phase transformation resulting in a P6₃ /mmc space group. On the other hand, an increase of the surfactant to organosilica molar ratio of between 0.26 and 0.31 results in films which at 70 % humidity form a mix of 2D and 3D hexagonal phases. A further increase of the surfactant amount leads to films with a 2D hexagonal phase. Finally, the different mesophases observed as a function of the solution aging emphasize the importance of the degree of polycondensation of the organosilica oligomers.

Vertical vs Lateral Macrophase Separation in Thin Films of Block Copolymer Mixtures: Computer Simulations and GISAXS Experiments

Mixtures of two diblock copolymers of very different lengths may feature both macro- and microphase separation; however, not much is known about the mechanisms of separation in diblock copolymer thin films. In the present work, we study thin films of mixtures of two compositionally symmetric block copolymers, both in the one-phase and in the two-phase state, combining coarse-grained molecular simulations (dissipative particle dynamics, DPD) with scattering experiments (grazing-incidence small-angle X-ray scattering, GISAXS). We reveal that the film thickness and selective adsorption of different blocks to the substrate control the distribution of macrophases within the film as well as the orientation of the lamellae therein. In thick films, the mixtures separate in the vertical direction into three layers: Two layers being rich in short copolymers are formed near the film interfaces, whereas a layer being rich in long copolymers is located in the film core. The lamellar orientation in the layers rich in short copolymers is dictated by the surface selectivity, and this orientation only weakly affects the vertical orientation of lamellae in the film core. This provides the opportunity to control the domain orientation in the copolymer films by mixing block copolymers with low-molecular additives instead of relying on a more complicated chemical modification of the substrate. In thinner films, a lateral phase separation appears.

Size, Shape, and Lateral Correlation of Highly Uniform, Mesoscopic, Self-Assembled Domains of Fluorocarbon-Hydrocarbon Diblocks at the Air/Water Interface: A GISAXS Study

The shape and size of self-assembled mesoscopic surface domains of fluorocarbon-hydrocarbon (FnHm) diblocks and the lateral correlation between these domains were quantitatively determined from grazing incidence small-angle X-ray scattering (GISAXS). The full calculation of structure and form factors unravels the influence of fluorocarbon and hydrocarbon block lengths on the diameter and height of the domains, and provides the inter-domain correlation length. The diameter of the domains, as determined from the form factor analysis, exhibits a monotonic increase in response to the systematic lengthening of each block, which can be attributed to the increase in van der Waals attraction between molecules. The pair correlation function in real space calculated from the structure factor implies that the inter-domain correlation can reach a distance that is over 25 times larger than the domain's size. The full calculation of the GISAXS signals introduced here opens a potential towards the hierarchical design of mesoscale domains of self-assembled small organic molecules, covering several orders of magnitude in space.

Grazing-incidence small-angle X-ray scattering (GISAXS) on small periodic targets using large beams

Grazing-incidence small-angle X-ray scattering (GISAXS) is often used as a versatile tool for the contactless and destruction-free investigation of nano-structured surfaces. However, due to the shallow incidence angles, the footprint of the X-ray beam is significantly elongated, limiting GISAXS to samples with typical target lengths of several millimetres. For many potential applications, the production of large target areas is impractical, and the targets are surrounded by structured areas. Because the beam footprint is larger than the targets, the surrounding structures contribute parasitic scattering, burying the target signal. In this paper, GISAXS measurements of isolated as well as surrounded grating targets in Si substrates with line lengths from 50 µm down to 4 µm are presented. For the isolated grating targets, the changes in the scattering patterns due to the reduced target length are explained. For the surrounded grating targets, the scattering signal of a 15 µm × 15 µm target grating structure is separated from the scattering signal of 100 µm × 100 µm nanostructured surroundings by producing the target with a different orientation with respect to the predominant direction of the surrounding structures. As virtually all litho-graphically produced nanostructures have a predominant direction, the described technique allows GISAXS to be applied in a range of applications, e.g. for characterization of metrology fields in the semiconductor industry, where up to now it has been considered impossible to use this method due to the large beam footprint.

GISAXS Analysis of the In-Depth Morphology of Thick PS-b-PMMA Films

The morphological evolution of cylinder-forming poly(styrene)-b-poly(methyl methacrylate) block copolymer (BCP) thick films treated at high temperatures in the rapid thermal processing (RTP) machine was monitored by means of in-depth grazing-incidence small-angle X-ray scattering (GISAXS). The use of this nondisruptive technique allowed one to reveal the formation of buried layers composed of both parallel- and perpendicular-oriented cylinders as a function of the film thickness (24 ≤ h ≤ 840 nm) and annealing time (0 ≤ t ≤ 900 s). Three distinct behaviors were observed depending on the film thickness. Up to h ≤ 160 nm, a homogeneous film consisting of perpendicular-oriented cylinders is observed. When h is between 160 and 700 nm, a decoupling process between both the air-BCP and substrate-BCP interfaces takes place, leading to the formation of mixed orientations (parallel and perpendicular) of the cylinders. Finally, for h > 700 nm, the two interfaces are completely decoupled, and the formation of a superficial layer of about 50 nm composed of perpendicular cylinders is observed. Furthermore, the through-film morphology affects the nanodomain long-range order, which substantially decreases in correspondence with the beginning of the decoupling process. When the thick samples are exposed to longer thermal treatments, an increase in the long-range order of the nanodomains occurs, without any sensible variation of the thickness of the superficial layer.

Nonionic Fluorinated Surfactant Removal from Mesoporous Film Using sc-CO2

Surfactant templated silica thin films were self-assembled on solid substrates by dip-coating using a partially fluorinated surfactant R₈^F(EO)₉ as the liquid crystal template. The aim was 2-fold: first we checked which composition in the phase diagram was corresponding to a 2D rectangular highly ordered crystalline phase and second we exposed the films to sc-CO₂ to foster the removal of the surfactant. The films were characterized by in situ X-ray reflectivity (XRR) and grazing incidence small angle X-ray scattering (GISAXS) under CO₂ pressure from 0 to 100 bar at 34 °C. GISAXS patterns reveal the formation of a 2-D rectangular structure at a molar ratio R₈^F(EO)₉/Si equal to 0.1. R₈^F(EO)₉ micelles have a cylindrical shape, which have a core/shell structure ordered in a hexagonal system. The core contains the R₈^F part and the shell is a mixture of (EO)₉ embedded in the silica matrix. We further evidence that the extraction of the template using supercritical carbon dioxide can be successfully achieved. This can be attributed to both the low solubility parameter of the surfactants and the fluorine and ethylene oxide CO₂-philic groups. The initial 2D rectangular structure was well preserved after depressurization of the cell and removal of the surfactant. We attribute the very high stability of the rinsed film to the large value of the wall thickness relatively to the small pore size.

Formation of swift heavy ion tracks on a rutile TiO2 (001) surface

Nanostructuring of surfaces and two-dimensional materials using swift heavy ions offers some unique possibilities owing to the deposition of a large amount of energy localized within a nanoscale volume surrounding the ion trajectory. To fully exploit this feature, the morphology of nanostructures formed after ion impact has to be known in detail. In the present work the response of a rutile TiO2 (001) surface to grazing-incidence swift heavy ion irradiation is investigated. Surface ion tracks with the well known intermittent inner structure were successfully produced using 23 MeV I ions. Samples irradiated with different ion fluences were investigated using atomic force microscopy and grazing-incidence small-angle X-ray scattering. With these two complementary approaches, a detailed description of the swift heavy ion impact sites, i.e. the ion tracks on the surface, can be obtained even for the case of multiple ion track overlap. In addition to the structural investigation of surface ion tracks, the change in stoichiometry of the rutile TiO2 (001) surface during swift heavy ion irradiation was monitored using in situ time-of-flight elastic recoil detection analysis, and a preferential loss of oxygen was found.

Pore shape and sorption behaviour in mesoporous ordered silica films

The shape and sorption behaviour of pores in mesoporous ordered silica films are determined from grazing-incidence small-angle X-ray scattering data.

Mesoporous silica films templated by pluronic P123 were prepared using spin and dip coating. The ordered cylindrical structure within the films deforms due to shrinkage during calcination. Grazing-incidence small-angle X-ray scattering (GISAXS) measurements reveal that both the unit cell and the cross section of the pores decrease in size, mainly normal to the surface of the substrate, leading to elliptical cross sections of the pores with axis ratios of about 1:2. Water take-up by the pores upon changing the relative humidity can be monitored quantitatively by the shift in the critical angle of X-ray reflection as seen by the Yoneda peak.

Sequentially Different AB Diblock and ABA Triblock Copolymers as P3HT:PCBM Interfacial Compatibilizers for Bulk-Heterojunction Photovoltaics

The P3HT:PCBM (P3HT = poly(3-hexylthiophene, PCBM = phenyl-C61-butyric acid methyl ester) bulk-heterojunction (BHJ) organic photovoltaic (OPV) cells using the AB diblock and ABA triblock copolymers (A = polystyrene derivative with donor-acceptor units (PTCNE) and B = P3HT) as compatibilizers were fabricated. Under the optimized blend ratio of the block copolymer, the power conversion efficiency (PCE) was enhanced. This PCE enhancement was clearly related to the increased short-circuit current (J(sc)) and fill factor (FF). The incident photon to current efficiency (IPCE) measurement suggested that the P3HT crystallinity was improved upon addition of the block copolymers. The increased P3HT crystallinity was consistent with the increased photovoltaic parameters, such as J(sc), FF, and consequently the PCE. The surface energies of these block copolymers suggested their thermodynamically stable location at the interface of P3HT:PCBM, showing the efficient compatibilizing performance, resulting in enlarging and fixing the interfacial area and suppressing the recombination of the generated carriers. Grazing incidence X-ray scattering (GIXS) results confirmed the superior compatibilizing performance of the ABA triblock copolymer when compared to the AB diblock copolymer by the fact that, after blending the ABA triblock copolymer in the P3HT:PCBM system, the enhanced crystallinity of matrix P3HT was observed in the excluded areas of the less-aggregated PCBM domains, changing the P3HT crystalline domain orientation from "edge-on" to "isotropic". This is, to the best of our knowledge, the first sequential effect (AB vs ABA) of the block copolymers on the compatibilizing performances based on BHJ OPV device systems.

Novel micro-reactor flow cell for investigation of model catalysts using in situ grazing-incidence X-ray scattering

The design, fabrication and performance of a novel and highly sensitive micro-reactor device for performing in situ grazing-incidence X-ray scattering experiments of model catalyst systems is presented. The design of the reaction chamber, etched in silicon on insulator (SIO), permits grazing-incidence small-angle X-ray scattering (GISAXS) in transmission through 10 µm-thick entrance and exit windows by using micro-focused beams. An additional thinning of the Pyrex glass reactor lid allows simultaneous acquisition of the grazing-incidence wide-angle X-ray scattering (GIWAXS). In situ experiments at synchrotron facilities are performed utilizing the micro-reactor and a designed transportable gas feed and analysis system. The feasibility of simultaneous in situ GISAXS/GIWAXS experiments in the novel micro-reactor flow cell was confirmed with CO oxidation over mass-selected Ru nanoparticles.