Characterizing Free Volumes and Layer Structures in Asymmetric Thin-Film Polymeric Membranes in the Wet Condition Using the Variable Monoenergy Slow Positron Beam

Ion-Selective Transport Promotion Enabled by Angstrom-Scale Nanochannels in Dendrimer-Assembled Polyamide Nanofilm for Efficient Electrodialysis

The ion permeability and selectivity of membranes are crucial in nanofluidic behavior, impacting industries ranging from traditional to advanced manufacturing. Herein, we demonstrate the engineering of ion-conductive membranes featuring angstrom-scale ion-transport channels by introducing ionic polyamidoamine (PAMAM) dendrimers for ion separation. The exterior quaternary ammonium-rich structure contributes to significant electrostatic charge exclusion due to enhanced local charge density; the interior protoplasmic channels of PAMAM dendrimer are assembled to provide additional degrees of free volume. This facilitates the monovalent ion transfer while maintaining continuity and efficient ion screening. The dendrimer-assembled hybrid membrane achieves high monovalent ion permeance of 2.81 mol m-2 h-1 (K+), reaching excellent mono/multivalent selectivity up to 20.1 (K+/Mg2+) and surpassing the permselectivities of state-of-the-art membranes. Both experimental results and simulating calculations suggest that the impressive ion selectivity arises from the significant disparity in transport energy barrier between mono/multivalent ions, induced by the "exterior-interior" synergistic effects of bifunctional membrane channels.

Nanofiltration Membranes with Salt-Responsive Ion Valves for Enhanced Separation Performance in Brackish Water Treatment: A Battle against the Limitation of Salt Concentration

Utilizing brackish water resources has imposed a high requirement on the design and construction of nanofiltration membranes. To overcome the limitation of high salt concentration on the nanofiltration separation performance resulting from the weakened Donnan effect, a nanofiltration membrane with the effect of salt-responsive ion valves was developed by incorporating zwitterionic nanospheres into the polyamide layer (PA-ZNs). The interaction between the nanospheres and membranes at high salinity was revealed through a combination analysis from the perspectives of water transport model, positron annihilation spectroscopy, and solute rejection, contributing to the formation of the valve effect. The PA-ZNs membrane presented a breakthrough in overcoming the limitation of increased salt concentrations on nanofiltration separation performance, achieving a high selectivity of 105 for mono/multivalent anions. To reveal the role of the ion valve effect in ion transport through the membrane, the membrane conductance was determined at different salt concentrations, confirming channel-controlled transport at low salinity and ion valve-controlled transport at high salinity. Moreover, the main membrane separation mechanisms were systematically studied. The concept of salt-responsive ion valves may contribute to expanding the application of nanofiltration in brackish water treatment.

Mechanism of a Self-Assembling Smart and Electrically Responsive PVDF-Graphene Membrane for Controlled Gas Separation

The development of science and technology is accompanied by a complex composition of multiple pollutants. Conventional passive separation processes are not sufficient for current industrial applications. The advent of active or responsive separation methods has become highly essential for future applications. In this work, we demonstrate the preparation of a smart electrically responsive membrane, a poly(vinylidene difluoride) (PVDF)-graphene composite membrane. The high graphene content induces the self-assembly of PVDF with a high β-phase content, which displays a unique self-piezoelectric property. Additionally, the membrane exhibits excellent electrical conductivity and unique capacitive properties, and the resultant nanochannels in the membrane can be reversibly adjusted by external voltage applications, resulting in the tailored gas selectivity of a single membrane. After the application of voltage to the membrane, the permeability and selectivity toward carbon dioxide increase simultaneously. Moreover, atomic-level positron annihilation spectroscopic studies reveal the piezoelectric effect on the free volume of the membrane, which helps us to formulate a gas permeation mechanism for the electrically responsive membrane. Overall, the novel active membrane separation process proposed in this work opens new avenues for the development of a new generation of responsive membranes.

Characterization of a Thermoresponsive Chitosan Derivative as a Potential Draw Solute for Forward Osmosis

A thermoresponsive chitosan derivative was synthesized by reacting chitosan (CS) with butyl glycidyl ether (BGE) to break the inter- and intramolecular hydrogen bonds of the polymer. An aqueous solution of the thermoresponsive CS derivative exhibits a lower critical solution temperature (LCST) than CS, and it undergoes a phase transition separation when the temperature changes. Successful incorporation of BGE into the CS was confirmed by FTIR and XPS analyses. Varying the BGE content and the concentration of the aqueous solution produced different LCST ranges, as shown by transmittance vs temperature curves. The particle size was observed by scanning electron microscopy, which revealed that the particles were smaller and well dispersed at 15 °C, whereas the particles became larger and tended to aggregate at 60 °C. A similar trend was observed with the mean particle size measured using dynamic light scattering. Positron annihilation lifetime spectroscopy data also revealed the reversibility of the particle properties as a function of temperature. Microstructure analysis showed that the particles had larger free-volume sizes at 15 °C than at 60 °C. The particles were also found to be nontoxic with 92% cell survival. A simple forward osmosis (FO) test for dye dehydration revealed the potential use of the thermoresponsive chitosan derivative as a draw solute with a flux of 8.6 L/m² h and rejection of 99.8%.

Positron annihilation spectroscopy: a new frontier for understanding nanoparticle-loaded polymer brushes

Nanoparticle-loaded polymer brushes are powerful tools for the development of innovative devices. However, their characterization is challenging and arrays of different techniques are typically required to gain sufficient insight. Here we demonstrate for the first time the suitability of positron annihilation spectroscopy (PAS) to investigate, with unprecedented detail and without making the least damage to samples, the physico-chemical changes experienced by pH-responsive polymer brushes after protonation and after loading of silver nanoparticles. One of the most important findings is the depth profiling of silver nanoparticles inside the brushes. These results open up a completely new way to understand the structure and behavior of such complex systems.

Non-destructive means of probing a composite polyamide membrane for characteristic free volume, void, and chemical composition

Positron annihilation spectroscopy measures free volume in membranes at the sub-nanometer scale (0.1–1 nm).

Applications of Positron Annihilation Spectroscopy to Life Science

Positron annihilation spectroscopy (PAS) is a novel method that can provide molecular-level information about complex biological and macromolecular structure in a manner which is different, but complementary, to conventional medical and biochemical research methodology. Positron annihilation lifetime spectroscopy (PALS) and Doppler broadening energy spectroscopy (DBES), coupled with a slow positron beam have been extensively applied to the life science research recently. These techniques provide new information about the atomic and molecular level free-volume and void sizes, and their distributions 0.1 nm to a few nm, molecular bonding, structures at depth-layers, and phase transitions. This paper is to review recent research on positron annihilation spectroscopy applied to the area of life science and also focus on current bioscience-related work in the positron group at the University of MissouriKansas City (UMKC).

Multilayered poly(vinylidene fluoride) composite membranes with improved interfacial compatibility: correlating pervaporation performance with free volume properties

A spin-coating process integrated with an ozone-induced graft polymerization technique was applied in this study. The purpose was to improve the poor interfacial compatibility between a selective layer of poly(2-hydroxyethyl methacrylate) (PHEMA) and the surface of a poly(vinylidene fluoride) (PVDF) substrate. The composite membranes thus fabricated were tested for their pervaporation performance in dehydrating an ethyl acetate/water mixture. Furthermore, the composite membranes were characterized by field emission scanning electron microscopy (FE-SEM) for morphological change observation and by Fourier transform infrared spectroscopy equipped with attenuated total reflectance (ATR-FTIR) for surface chemical composition analysis. Effects of grafting density and spin-coating speed on pervaporation performance were examined. The composite membrane pervaporation performance was elucidated by means of free volume and depth profile data obtained with the use of a variable monoenergy slow positron beam (VMSPB). Results indicated that a smaller free volume was correlated with a higher pervaporation performance of a composite membrane consisting of a selective layer of spin-coated PHEMA on a PHEMA-grafted PVDF substrate (S-PHEMA/PHEMA-g-PVDF). The composite membrane depth profile illustrated that an S-PHEMA layer spin-coated at a higher revolutions per minute (rpm) was thinner and denser than that at a lower rpm.

Solving the charging effect in insulating materials probed by a variable monoenergy slow positron beam

A variable monoenergy slow positron beam (VMSPB) operating at a high vacuum on insulating materials encounters a problem of significant surface charging effect with time. As a result, positronium formation is inhibited, and the positron annihilation radiation counting rate is reduced; these consequently distorted the experimental positron annihilation and results. To solve such problems, a technique of depositing an ultrathin layer of sputtering noble metals on insulators is developed. We report a successful method of sputtering a few atomic layers of platinum (∼1 nm) on a polyamide membrane to completely remove the charging effect for VMSPB applications in insulators.