Divergent Shear Thinning and Shear Thickening Behavior of Supramolecular Polymer Networks in Semidilute Entangled Polymer Solutions

Replicating shear-mediated self-assembly of spider silk through microfluidics

The development of artificial spider silk with properties similar to native silk has been a challenging task in materials science. In this study, we use a microfluidic device to create continuous fibers based on recombinant MaSp2 spidroin. The strategy incorporates ion-induced liquid-liquid phase separation, pH-driven fibrillation, and shear-dependent induction of β-sheet formation. We find that a threshold shear stress of approximately 72 Pa is required for fiber formation, and that β-sheet formation is dependent on the presence of polyalanine blocks in the repetitive sequence. The MaSp2 fiber formed has a β-sheet content (29.2%) comparable to that of native dragline with a shear stress requirement of 111 Pa. Interestingly, the polyalanine blocks have limited influence on the occurrence of liquid-liquid phase separation and hierarchical structure. These results offer insights into the shear-induced crystallization and sequence-structure relationship of spider silk and have significant implications for the rational design of artificially spun fibers.

Shear Thickening Behavior in Injectable Tetra-PEG Hydrogels Cross-Linked via Dynamic Thia-Michael Addition Bonds

Injectable poly(ethylene glycol) (PEG)-based hydrogels were reversibly cross-linked through thia-conjugate addition bonds and demonstrated to shear thicken at low shear rates. Cross-linking bond exchange kinetics and dilute polymer concentrations were leveraged to tune hydrogel plateau moduli (from 60 to 650 Pa) and relaxation times (from 2 to 8 s). Under continuous flow shear rheometry, these properties affected the onset of shear thickening and the degree of shear thickening achieved before a flow instability occurred. The changes in viscosity were reversible whether the shear rate increased or decreased, suggesting that chain stretching drives this behavior. Given the relevance of dynamic PEG hydrogels under shear to biomedical applications, their injectability was investigated. Injection forces were found to increase with higher polymer concentrations and slower bond exchange kinetics. Altogether, these results characterize the nonlinear rheology of dilute, dynamic covalent tetra-PEG hydrogels and offer insight into the mechanism driving their shear thickening behavior.

The Contributions of Supramolecular Kinetics to Dynamics of Supramolecular Polymers

Supramolecular polymers exhibit well-controlled dynamics with fascinating capacity for remodeling, self-healing, and stimuli-responsiveness. Supramolecular kinetics of non-covalent bonds is a dominant control handle among the relevant factors to tailor dynamics of supramolecular polymers. This Review focuses on elucidating how supramolecular kinetics dictates the polymer dynamics in supramolecular polymer systems. The ways to tailor supramolecular kinetics are firstly examined as prerequisites for structure-activity study of supramolecular polymers. We next discuss the role of supramolecular kinetics in supramolecular polymers under different polymer architectures by the combination of both of theoretical and experimental studies. Finally, we conclude by discussing the existing challenges and opportunities in the current studies.

Self-Healing Injectable Hydrogels for Tissue Regeneration

Biomaterials with the ability to self-heal and recover their structural integrity offer many advantages for applications in biomedicine. The past decade has witnessed the rapid emergence of a new class of self-healing biomaterials commonly termed injectable, or printable in the context of 3D printing. These self-healing injectable biomaterials, mostly hydrogels and other soft condensed matter based on reversible chemistry, are able to temporarily fluidize under shear stress and subsequently recover their original mechanical properties. Self-healing injectable hydrogels offer distinct advantages compared to traditional biomaterials. Most notably, they can be administered in a locally targeted and minimally invasive manner through a narrow syringe without the need for invasive surgery. Their moldability allows for a patient-specific intervention and shows great prospects for personalized medicine. Injected hydrogels can facilitate tissue regeneration in multiple ways owing to their viscoelastic and diffusive nature, ranging from simple mechanical support, spatiotemporally controlled delivery of cells or therapeutics, to local recruitment and modulation of host cells to promote tissue regeneration. Consequently, self-healing injectable hydrogels have been at the forefront of many cutting-edge tissue regeneration strategies. This study provides a critical review of the current state of self-healing injectable hydrogels for tissue regeneration. As key challenges toward further maturation of this exciting research field, we identify (i) the trade-off between the self-healing and injectability of hydrogels vs their physical stability, (ii) the lack of consensus on rheological characterization and quantitative benchmarks for self-healing injectable hydrogels, particularly regarding the capillary flow in syringes, and (iii) practical limitations regarding translation toward therapeutically effective formulations for regeneration of specific tissues. Hence, here we (i) review chemical and physical design strategies for self-healing injectable hydrogels, (ii) provide a practical guide for their rheological analysis, and (iii) showcase their applicability for regeneration of various tissues and 3D printing of complex tissues and organoids.

Collagen-Binding Peptide-Enabled Supramolecular Hydrogel Design for Improved Organ Adhesion and Sprayable Therapeutic Delivery

Spraying serves as an attractive, minimally invasive means of administering hydrogels for localized delivery, particularly due to high-throughput deposition of therapeutic depots over an entire target site of uneven surfaces. However, it remains a great challenge to design systems capable of rapid gelation after shear-thinning during spraying and adhering to coated tissues in wet, physiological environments. We report here on the use of a collagen-binding peptide to enable a supramolecular design of a biocompatible, bioadhesive, and sprayable hydrogel for sustained release of therapeutics. After spraying, the designed peptide amphiphile-based supramolecular filaments exhibit fast, physical cross-linking under physiological conditions. Our ex vivo studies suggest that the hydrogelator strongly adheres to the wet surfaces of multiple organs, and the extent of binding to collagen influences release kinetics from the gel. We envision that the sprayable organ-adhesive hydrogel can serve to enhance the efficacy of incorporated therapeutics for many biomedical applications.

Supramolecular engineering of hydrogels for drug delivery

Supramolecular binding motifs are increasingly employed in the design of biomaterials. The ability to rationally engineer specific yet reversible associations into polymer networks with supramolecular chemistry enables injectable or sprayable hydrogels that can be applied via minimally invasive administration. In this review, we highlight two main areas where supramolecular binding motifs are being used in the design of drug delivery systems: engineering network mechanics and tailoring drug-material affinity. Throughout, we highlight many of the established and emerging chemistries or binding motifs that are useful for the design of supramolecular hydrogels for drug delivery applications.

A computational study of the behavior of colloidal gel networks at low volume fraction

Colloidal gel networks appear in different scientific and industrial applications because of their unique properties. Molecular dynamics simulations could reveal the relation between molecular level and macroscopic properties of these systems. Nevertheless, the predictions of numerical simulations might depend on the specific form and parameters of interaction potentials. In this paper, a new effective interaction potential is used for characterizing the mechanical behavior of low volume fraction colloidal gels under large shear deformation. The findings are compared with those obtained from other available forms of interaction potentials in order to determine gel characteristics that are interaction potential independent. Furthermore, the macroscopic stress-strain behavior is discussed in terms of the behavior of different terms of the proposed interaction potential. The correlation between the stretch of interparticle bonds and their alignment in the direction of the maximum principal stress is also computed in order to provide microscopic explanations for the initial strain softening behavior. It is concluded that, in addition to topology, local mechanical interactions between colloidal particles are important in defining the mechanical response of soft gels.

Gallol-derived ECM-mimetic adhesive bioinks exhibiting temporal shear-thinning and stabilization behavior

3D bioprinting is an attractive technique to fabricate well-organized, cell-laden constructs for tissue repair and disease modeling. Although numerous hydrogel bioinks have been developed, materials are still needed that mimic the cellular microenvironment, have the appropriate viscosity and stabilization for printing, and are cytocompatible. Here, we present a unique gallol-modified extracellular matrix (ECM) hydrogel ink that is inspired by rapid fruit browning phenomena. The gallol-modification of ECM components (e.g., hyaluronic acid, gelatin) allowed (i) immediate gelation and shear-thinning properties by dynamic hydrogen bonds on short time-scales and (ii) further auto-oxidation and covalent crosslinking for stabilization on longer time-scales. The gallol ECM hydrogel ink was printable using an extrusion-based 3D printer by exploiting temporal shear-thinning properties, and further showed cytocompatibility (∼95% viability) and on-tissue printability due to adhesiveness of gallol moieties. Printed cell-laden filaments degraded and swelled with culture over 6 days, corresponding to increases in cell density and spreading. Ultimately, this strategy is useful for designing hydrogel inks with tunable properties for 3D bioprinting. STATEMENT OF SIGNIFICANCE: 3D bioprinting is a promising technique for the fabrication of cell-laden constructs for applications as in vitro models or for therapeutic applications. Despite the previous development of numerous hydrogel bioinks, there still remain challenging considerations in the design of bioinks. In this study, we present a unique cytocompatible hydrogel ink with gallol modification that is inspired by rapid fruit browning phenomena. The gallol hydrogel ink has three important properties: i) it shows immediate gelation by dynamic, reversible bonds for shear-thinning extrusion, ii) it allows spontaneous stabilization by subsequent covalent crosslinking after printing, and iii) it is printable on tissues by adhesive properties of gallol moieties. As such, this work presents a new approach in the design of hydrogel inks.

Foaming of Transient Polymer Hydrogels

Foams made with polymer hydrogels can be used in a variety of applications, such as scaffolds for biomedical applications or decontamination processes. However, from a practical point of view, it is difficult to introduce bubbles into viscous or viscoelastic fluids and to produce large volumes of hydrogel foams. In the present article, we investigate the foaming process of poly(vinyl alcohol) (PVA)/borax transient hydrogels, where PVA chains reversibly bind to borax molecules. In a previous article, we showed that foams obtained with PVA/borax mixtures are highly stable because of both high interfacial and bulk viscosities and can be used to quickly absorb liquids, which make them suitable for detergency or decontamination processes. To produce these foams, we use a two-step foaming process which consists in first shearing a PVA solution to obtain a PVA foam and second adding borax to the PVA foam under continuous shearing. The obtained PVA/borax foams are stable for weeks. In this study, we observe a shear-induced collapse of the foams for formulations containing a low borax/PVA ratio, whereas they remain stable under shear for high PVA/borax ratios. Using scaling arguments, we find that the shear-induced collapse of the foams and bubbles is obtained below a critical ratio, N E/N B = 15, of the number of entanglements per chain, N E, and the number of borax per chain, N B. Rheology measurements show that the samples present a shear-thickening behavior that increases with the borax concentration. We suggest that during the foaming process when the shearing rate is of the order of 100 s-1, the viscosity of these samples diverges, leading to a viscous to fragile transition. To mimic the fast stretching of the PVA/borax thin films during the foaming process, we study the stretching of individual PVA/borax catenoid-shaped thin films at high stretching rates. We observe that the films containing low PVA/borax ratios do not minimize their surface area unlike what is theoretically expected for standard surfactant films. Moreover, the films tend to be unstable and fracture because the PVA/borax network does not have time to rearrange and relax stresses for high stretching rates.

Dependences of Rheological and Compression Mechanical Properties on Cellular Structures for Impact-Protective Materials

In this study, three typical impact-protective materials, D3O, PORON XRD, and DEFLEXION were chosen to explore the dependences of rheological and compression mechanical properties on the internal cellular structures with polymer matrix characteristics, which were examined using Fourier transform infrared spectroscopy, thermogravimetric analyses, and scanning electron microscopy with energy dispersive spectroscopy. The rheological property of these three foaming materials were examined using a rheometer, and the mechanical property in a compression mode was further examined using an Instron universal tensile testing machine. The dependences of rheological parameters, such as dynamic moduli, normalized moduli, and loss tangent, on angular frequency, and the dependences of mechanical properties in compression, such as the degree of strain-hardening, hysteresis, and elastic recovery, on the strain rate for D3O, PORON XRD, and DEFLEXION can be well-correlated with their internal cellular structural parameters, revealing, for example, that D3O and PORON XRD exhibit simultaneously high strength and great energy loss in a high-frequency impact, making them suitable for use as soft, close-fitting materials; however, DEFLEXION dissipates much energy whether it suffers a large strain rate or not, making it suitable for use as a high-risk impact-protective material. The rheometry and compression tests used in this study can provide the basic references for selecting and characterizing certain impact-protective materials for applications.

Reversible polypeptide hydrogels from asymmetric telechelics with temperature-dependent and Ni(2+)-dependent connectors

An asymmetric ('hybrid') triblock polypeptide TR4H with two different, orthogonally self-assembling end blocks has been constructed by conjugating a long (37 kDa) random coil block (R4) with a triple helix former T = (Pro-Gly-Pro)9 at the N terminus, and a histidine hexamer ('Histag', H) at the C terminus. This molecule can form trimers at room temperature by assembly of the T blocks, which can in turn assemble upon addition of Ni(2+), by association of Ni complexes involving the H block. This results in reversible hydrogels with dual responsiveness. We have studied mechanical properties of these gels, and compared them to gels formed by the symmetric triblock TR8T which is equivalent to a dimer of TR4H, but can only form triple helix-based networks. We find that there is an optimum mole ratio for Ni(2+) with respect to the polypeptide of about 1; gels are weaker at both lower and higher Ni(2+) dose. At the optimum dose, the high-frequency storage modulus is in between the value expected for nickel-induced dimerization and trimerization of the H blocks. We also find that the gels relax on time scales of about 50 s, which is two orders of magnitude faster than for TR8T gels, implying that relaxation is dominated by the dynamics of the Ni(2+) complex.

Supramolecular Guest-Host Interactions for the Preparation of Biomedical Materials

Supramolecular chemistry has emerged as an important technique for the formation of biomaterials, including nano- and microparticles and hydrogels. One specific class of supramolecular chemistry is the direct association of guest-host pairs, which involves host macrocycles such as cyclodextrins and cucurbit[n]urils and a wide range of guest molecules, where association is typically driven by molecule size and hydrophobicity. These systems are of particular interest in the biomedical field due to their dynamic nature, chemical diversity, relative ease of synthesis, and ability to interact with biological or synthetic molecules. In this review, we discuss aspects of polymeric material assembly mediated by guest-host interactions, including the fundamentals of assembly into functional biomedical materials. Additionally, applications of biomaterials that utilize guest-host interactions are discussed with a focus on injectable material formulations, the sequestration and delivery of encapsulated cargo (i.e., drugs, biomolecules), and the investigation of cell-material interactions (i.e., adhesion, differentiation, and delivery). While methodologies for guest-host mediated assembly and biological interaction have rapidly evolved in recent years, they remain far from realizing their full potential in the biomaterials field.

Connecting supramolecular bond lifetime and network mobility for scratch healing in poly(butyl acrylate) ionomers containing sodium, zinc and cobalt

In this work, we correlate network dynamics, supramolecular reversibility and the macroscopic surface scratch healing behavior for a series of elastomeric ionomers based on an amorphous backbone with varying fractions of carboxylate pendant groups completely neutralized by Na(+), Zn(2+) or Co(2+) as the counter ions. Our results based on temperature dependent dynamic rheology with simultaneous FTIR analysis clearly indicate that the effective supramolecular bond lifetime (τ(b)) is an important parameter to ascertain the ideal range of viscoelasticity for good macroscopic healing. The reversible coordination increased with higher valence metal ions and ionic content. Both rheological and spectroscopic analyses show a decrease in supramolecular assembly with temperature. The temperature dependent τ(b) was used to calculate the activation energy (Ea) of dissociation for the ionic clusters. According to self-healing experiments based on macroscale surface scratching, a supramolecular bond lifetime between 10 and 100 s results in samples with complete surface scratch healing and good mechanical robustness.

Facile synthesis of one dimensional AgBr@Ag nanostructures and their visible light photocatalytic properties

In this work, we successfully prepared one dimensional (1D) AgBr@Ag nanostructures in high yield by a facile wet chemical method, and the plausible growth mechanism was discussed. The synthesis of as-prepared AgBr@Ag nanostructure is a dissolution and recrystallization process, and the PVP and DMSO have a synergistic and competitive effect on the preparation of 1D AgBr@Ag products. Moreover, the AgBr@Ag nanorods exhibit excellent photocatalytic activities under visible light illumination, which may be attributed to their large surface area as well as superior charge separation and transfer efficiency compared to AgBr@Ag particles.

Rational design of network properties in guest-host assembled and shear-thinning hyaluronic acid hydrogels

Shear-thinning hydrogels afford direct injection or catheter delivery to tissues without potential premature gel formation and delivery failure or the use of triggers such as chemical initiators or heat. However, many shear-thinning hydrogels require long reassembly times or exhibit rapid erosion. We developed a shear-thinning hyaluronic acid (HA) hydrogel based on the guest-host interactions of adamantane modified HA (guest macromer, Ad-HA) and β-cyclodextrin modified HA (host macromer, CD-HA). The ability of the guest and host molecules to interact with their counterpart following conjugation to HA was confirmed by (1)H NMR spectroscopy and was similar to that of the native complex. Mixing of Ad-HA and CD-HA resulted in rapid formation of a hydrogel composed of guest-host bonds. The hydrogel physical properties, including mechanics and flow characteristics, were dependent on cross-link density and network structure, which were controlled through macromer concentration, the extent of guest macromer modification, and the molar ratio of guest and host functional groups. The guest-host assembly mechanism permitted both shear-thinning behavior for ease of injection and near-instantaneous reassembly for material retention at the target sight. The hydrogel erosion and release of a model biomolecule were also dependent on design parameters and were sustained for over 60 days. These hydrogels show potential as a minimally invasive injectable hydrogel for biomedical applications.

Nonlinear mechanics of thermoreversibly associating dendrimer glasses

We model the mechanics of associating trivalent dendrimer network glasses with a focus on their energy dissipation properties. Various combinations of sticky bond (SB) strength and kinetics are employed. The toughness (work to fracture) of these systems displays a surprising deformation-protocol dependence; different association parameters optimize different properties. In particular, "strong, slow" SBs optimize strength, while "weak, fast" SBs optimize ductility via self-healing during deformation. We relate these observations to breaking, reformation, and partner switching of SBs during deformation. These studies point the way to creating associating-polymer network glasses with tailorable mechanical properties.

Mussel-inspired histidine-based transient network metal coordination hydrogels

Transient network hydrogels cross-linked through histidine-divalent cation coordination bonds were studied by conventional rheologic methods using histidine-modified star poly(ethylene glycol) (PEG) polymers. These materials were inspired by the mussel, which is thought to use histidine-metal coordination bonds to impart self-healing properties in the mussel byssal thread. Hydrogel viscoelastic mechanical properties were studied as a function of metal, pH, concentration, and ionic strength. The equilibrium metal-binding constants were determined by dilute solution potentiometric titration of monofunctional histidine-modified methoxy-PEG and were found to be consistent with binding constants of small molecule analogs previously studied. pH-dependent speciation curves were then calculated using the equilibrium constants determined by potentiometric titration, providing insight into the pH dependence of histidine-metal ion coordination and guiding the design of metal coordination hydrogels. Gel relaxation dynamics were found to be uncorrelated with the equilibrium constants measured, but were correlated to the expected coordination bond dissociation rate constants.

A multiresponsive, shape-persistent, and elastic supramolecular polymer network gel constructed by orthogonal self-assembly

A cross-linked supramolecular polymer network gel is designed and prepared, which shows reversible gel-sol transitions induced by changes in pH, temperature, cation concentration, and metal co-ordination. The gel pore size is controlled by the amount of cross-linker added to the system, and the material can be molded into shape-persistent, free-standing objects with elastic behavior. These features are all due to the dynamically reversible host-guest complexation and good mechanical properties of the cross-linked polymer network. No single organogel has previously been reported to possess all of these features, making this supramolecular gel an unprecedentedly intelligent soft material.

Strain Hardening and Strain Softening of Reversibly Cross-linked Supramolecular Polymer Networks

The large amplitude oscillatory shear behavior of metallo-supramolecular polymer networks formed by adding bis-Pd(II) cross-linkers to poly(4-vinylpyridine) (PVP) in dimethyl sulfoxide (DMSO) solution is reported. The influence of scanning frequency, dissociation rate of cross-linkers, concentration of cross-linkers, and concentration of PVP solution on the large amplitude oscillatory shear behavior is explored. In semidilute unentangled PVP solutions, above a critical scanning frequency, strain hardening of both storage moduli and loss moduli is observed. In the semidilute entangled regime of PVP solution, however, strain softening is observed for samples with faster cross-linkers (k(d) ∼ 1450 s(-1)), whereas strain hardening is observed for samples with slower cross-linkers (k(d) ∼ 17 s(-1)). The mechanism of strain hardening is attributed primarily to a strain-induced increase in the number of elastically active chains, with possible contributions from non-Gaussian stretching of polymer chains at strains approaching network fracture. The divergent strain softening of samples with faster cross-linkers in semidilute entangled PVP solutions, relative to the strain hardening of samples with slower cross-linkers, is consistent with observed shear thinning/shear thickening behavior reported previously and is attributed to the fact that the average time that a cross-linker remains detached is too short to permit the local relaxation of polymer chain segments that is necessary for a net conversion of elastically inactive to elastically active cross-linkers. These and other observations paint a picture in which strain softening and shear thinning arise from the same set of molecular mechanisms, conceptually uniting the two nonlinear responses for this system.

Highly stable chiral (A)6-B supramolecular copolymers: a multivalency-based self-assembly process

A novel type of chiral layered supramolecular copolymer with high molecular weight has been assembled from a hydrogen bonded C(6)-symmetric zinc porphyrin hexamer and chiral C(3)-symmetric pyridine hexadentate linkers driven by multivalent zinc porphyrin-pyridine coordination. UV-vis, circular dichroism, and static light scattering experiments revealed that the formation of the layered supramolecular copolymers is at first dynamically controlled and then becomes thermodynamically controlled.

Scaling Laws in Supramolecular Polymer Networks

The linear rheological properties of networks formed by adding bis-Pd(II) cross-linkers to poly(4-vinylpyridine) (PVP) solution are examined, and the scaling law relationships between the zero shear viscosity (η(0)) of the networks versus the concentration of PVP solution (C(PVP)), the concentration of cross-linkers (C(X)), and the number density of elastically active chains (v(phantom)) are experimentally determined. The scaling law relationships are compared to the theoretical expectations of the Sticky Rouse and Sticky Reptation models (Macromolecules2001, 34, 1058-1068), and both qualitative and quantitative differences are observed.