Selective Detection of TNT and Picric Acid by Conjugated Polymer Film Sensors with Donor–Acceptor Architecture

Displacement Assay in a Polythiophene Sensor System Based on Supramacromolecuar Disassembly-Caused Emission Quenching

Exploring new methodologies for simple and on-demand methods of manipulating the emission and sensing ability of fluorescence sensor devices with solid-state emission molecular systems is important for realizing on-site sensing platforms. In this regard, although conjugated polymers (CPs) are some of the best candidates for preparing molecular sensor devices owing to their luminescent and molecular recognition properties, the development of CP-based sensor devices is still in its early stages. In this study, we herein propose a novel strategy for preparing a chemical stimuli-responsive solid-state emission system based on supramacromolecular assembly-induced emission enhancement (SmAIEE). The system was spontaneously developed by mixing only the component polymers (i.e., polythiophene and a transient cross-linking polymer). The proposed strategy can be applied to the facile preparation of molecular sensor devices. The analyte-induced fluorescent response of polythiophene originated from the dynamic displacement of the transient cross-linker in the polythiophene ensemble and the generation of the polythiophene-analyte complex. Our successful demonstration of the spontaneous preparation of the fluorescence sensor system by mixing two component polymers could lead to the development of on-site molecular analyzers including the determination of multiple analytes.

D-π-A-π-D-Configured Imidazole-Tethered Benzothiadiazole-Based Sensor for the Ratiometric Discrimination of Picric Acid: Applications in Latent Fingerprint Imaging

A tetraphenyl imidazole-appended benzothiadiazole-based fluorogenic probe (4,7-bis(4-(1,4,5-triphenyl-1H-imidazol-2-yl)phenyl)benzo[c][1,2,5]thiadiazole (BIPT)) has been successfully synthesized and characterized by NMR and high-resolution mass spectrometry (HRMS) spectral analyses. A low limit of detection (LOD) can be achieved to detect picric acid (PA; 7.89 nM). When benzothiadiazole acceptors are incorporated in the D-A-D probe, it can produce a large Stokes shift (206 nm) as a result. Fascinatingly, the fluorescence signals of BIPT were ratiometrically induced by the interaction with PA and exhibited an apparent emission shift from pink to green. The detection process of BIPT is triggered by an intermolecular charge transfer process, as the charge transfer takes place from the electron-rich imidazole to the electron-deficient PA. Moreover, fluorescence detection of PA has been employed in paper strips. Advantageously, sensor BIPT can potentially be applied to contact mode and real-time detection of PA in environmental water samples. Additionally, the BIPT sensor has been successfully employed for latent fingerprint imaging. The study provides clear insights into the rational design of chemosensors for sensing and real-time applications.

Enhanced TNT vapor sensing through a PMMA-mediated AIPE-active monocyclometalated iridium(III) complex: a leap towards real-time monitoring

Based on the explosive nature and harmful effects of nitro-based explosive materials on living beings and the environment, it is extremely important to develop luminescence-based probe molecules for their detection with excellent selectivity and sensitivity. Two AIPE (aggregation-induced phosphorescence emission)-active iridium(III) complexes (M1 and M2) were developed for the sensitive detection of TNT in both contact and non-contact modes. The aggregate solutions of both complexes (M1 and M2 in THF/H2O, 1/9 by volume) detected TNT at the pico-molar (pM) level. These complexes showed greatly enhanced emission intensity while embedded in a PMMA(polymethyl methacrylate) matrix film. The amplified quantum efficiency, improved phosphorescence lifetime, and enhanced porous network of M2-PMMA composite helps to improve the sesitivity of TNT vapor detection. Interestingly, the sensitivity of the detection of TNT by the M2 complex was significantly improved (5-fold) in a PMMA-incorporated complex (CP) with an observed limit of detection (LOD) of 12.8 ppb. From the BET analysis of CP, it was observed that the mesoporous network of CP has an average pore diameter of 8.52 nm and a surface area of 2.03 m2 g-1. The porous network of CP assists in trapping TNT vapor in a polymeric network containing an electron-rich probe (iridium(III) complex, M2), which helps to effectively trap TNT, thus enhancing electronic communication. As a result, significant emission quenching was observed.

Chromone-Based Cd(II) Fluorescent Coordination Polymer Fabricated to Study Optoelectronic and Explosive Sensing Properties

Here, electrical conductivity and explosive sensing properties of multifunctional chromone-Cd(II)-based coordination polymers (CPs) (1-4) have been explored. The presence of different pseudohalide linkers, thiocyanate ions, and dicyanamide ions resulted in 1D and 3D architecture in the CPs. Thin film devices developed from CPs 1-4 (complex-based Schottky devices, CSD1, CSD2, CSD3, and CSD4, respectively) showed semiconductor behavior. Their conductivity values increased under photo illumination (1.37 × 10-5, 1.85 × 10-5, 1.61 × 10-5, and 2.01 × 10-5 S m-1 under dark conditions and 5.06 × 10-5, 8.78 × 10-5, 7.26 × 10-5, and 10.21 × 10-5 S m-1 under light). The nature of the I-V plots of these thin film devices under light irradiation and dark are nonlinear rectifying, which has been observed in Schottky barrier diodes (SBDs). All four CPs (1-4) exhibited highly selective fluorescence quenching-based sensing properties toward well-known explosives, 2,4-dinitrophenol (DNP) and 2,4,6-trinitrophenol (TNP). The limit of detection (LOD) values are 55, 28, 27, and 31 μM for TNP and 78, 44, 32, and 41 μM for DNP for complexes 1-4, respectively. A structure property correlation has been established to explain optoelectronic and explosive sensing properties.

AIE/AEE tripodal PEGyl-melphalan supramolecules and detection of trinitrophenol in water

Herein, the design of a novel aggregation-induced emission (AIE) supramolecular fluorescence sensor (TA-PEGn) based on a tridentate melphalan derivative and three different molecular weight PEGs is presented. The three TA-PEGn sensors could self-assemble into a supramolecular system in water and show sensitive and selective responses toward trinitrophenol.

Polymers and Polymer-Based Materials for the Detection of (Nitro-)explosives

Methods for the remote detection of warfare agents and explosives have been in high demand in recent times. Among the several detection methods, fluorescence methods appear to be more convenient due to their low cost, simple operation, fast response time, and naked-eye-visible sensory response. For fluorescence methods, a large variety of fluorescent materials, such as small-molecule-based fluorophores, aggregation-induced emission fluorophores/materials, and supramolecular systems, have been reported in the literature. Among them, fluorescent (bio)polymers/(bio)polymer-based materials have gained wide attention due to their excellent mechanical properties and sensory performance, their ability to recognize explosives via different sensing mechanisms and their combinations, and, finally, the so-called amplification of the sensory response. This review provides the most up-to-date data on the utilization of polymers and polymer-based materials for the detection of nitroaromatic compounds (NACs)/nitro-explosives (NEs) in the last decade. The literature data have been arranged depending on the polymer type and/or sensory mechanism.

Heteroatom-Doped Carbon Quantum Dots and Polymer Composite as Dual-Mode Nanoprobe for Fluorometric and Colorimetric Determination of Picric Acid

Oxygen- and nitrogen-heteroatom-doped, water-dispersible, and bright blue-fluorescent carbon dots (ON-CDs) were prepared for the selective and sensitive determination of 2,4,6-trinitrophenol (picric acid, PA). ON-CDs with 49.7% quantum yield were one-pot manufactured by the reflux method using citric acid, d-glucose, and ethylenediamine precursors. The surface morphology of ON-CDs was determined by scanning transmission electron microscopy, high-resolution transmission electron microscopy, dynamic light scattering, Raman, infrared, and X-ray photoelectron spectroscopy techniques, and their photophysical properties were estimated by fluorescence spectroscopy, UV-vis spectroscopy, fluorescence lifetime measurement, and 3D-fluorescence excitation-emission matrix analysis. ON-CDs at an average particle size of 3.0 nm had excitation/emission wavelengths of 355 and 455 nm, respectively. With the dominant inner-filter effect- and hydrogen-bonding interaction-based static fluorescence quenching phenomena supported by ground-state charge-transfer complexation (CTC), the fluorescence of ON-CDs was selectively quenched with PA in the presence of various types of explosives (i.e., 2,4,6-trinitrotoluene, tetryl, 1,3,5-trinitroperhydro-1,3,5-triazine, 1,3,5,7-tetranitro-1,3,5,7-tetraazacyclooctane, pentaerythritol tetranitrate, 3-nitro-1,2,4-triazole-5-one, and TATP-hydrolyzed H2O2). The analytical results showed that the emission intensity varied linearly with a correlation coefficient of 0.9987 over a PA concentration range from 1.0 × 10-9 to 11.0 × 10-9 M. As a result of ground-state interaction (H-bonding and CTC) of ON-CDs with PA, an orange-colored complex was formed different from the characteristic yellow color of PA in an aqueous medium, allowing naked-eye detection of PA. The detection limits for PA with ON-CDs were 12.5 × 10-12 M (12.5 pM) by emission measurement and 9.0 × 10-10 M (0.9 nM) by absorption measurement. In the presence of synthetic explosive mixtures, common soil cations/anions, and camouflage materials, PA was recovered in the range of 95.2 and 102.5%. The developed method was statistically validated against a reference liquid chromatography coupled to tandem mass spectrometry method applied to PA-contaminated soil. In addition, a poly(vinyl alcohol)-based polymer composite film {PF(ON-CDs)} was prepared by incorporating ON-CDs, enabling the smartphone-assisted fluorometric detection of PA.

A short review article on conjugated polymers

This article provides a brief review of conjugated polymers and the various typical polymerization reactions exploited by the community to synthesise different conjugated polyelectrolytes with varied conjugated backbone systems. We further discuss with detailed emphasises the mechanism involved such as photo-induced electron transfer, resonance energy transfer, and intra-molecular charge transfer in the detection or sensing of various analytes. Owing to their excellent photo-physical properties, facile synthesis, ease of functionalization, good biocompatibility, optical stability, high quantum yield, and strong fluorescence emission. Conjugated polymers have been explored for wide applications such as chemical and biological sensors, drug delivery and drug screening, cancer therapeutics and imaging. As such we believe it will be a timely review article for the community.

Octylamine as environment friendlier colorimetric detection probe for hazardous 2,4,6-Trinitrophenol from wastewater samples

The precise detection of hazardous 2,4,6-Trinitrophenol (TNP) is essential for the environment and human health. TNP is used as a precursor in whistling fireworks in ammunition, mining, agriculture and is a hazardous environmental pollutant generated from leather, chemical, and dye industries. Exploring rapid and low-cost approaches for the detection and quantification of TNP has attracted many scientists nowadays. The proposed chemosensor utilizes the concept of dispersive liquid-liquid micro-extraction coupled with a UV-visible spectrophotometer for its sensing at the ultra-trace level. Significant changes based on intramolecular interactions followed by a distinct color change to orange-red from yellow in the presence of TNP is an attractive feature for the present study. The successive addition of TNP shows ultra-trace sensitivity (3.9831 μA μM^-1 cm^-1) at detection limit (LOD) of 0.0015 ± 0.03 μM (S/N = 3), a linear range of 0 μM-70 μM, and a response time of <5 min. Different types of real samples such as creatinine testing kit reagent, fireflies crackers, serum, and water samples were used and recovery of TNP was calculated by spiking the known concentration of the standard analyte. The obtained recovery was 93.6-103.6% with RSD range of 1.6-4.53% (n = 3) in different samples. The analytical performance of the colorimetric Chemoprobe in terms of its recovery, linearity range, and limit of detection offers an excellent platform for monitoring hazardous TNP. The results show that the proposed colorimetric chemosensor is easy to use, low-cost, environmentally friendly and offers an easily observable visual color change. Based on these features, the chemosensor can be used for large-scale applications for the detection of TNP in water and other samples.

Dual "Static and Dynamic" Fluorescence Quenching Mechanisms Based Detection of TNT via a Cationic Conjugated Polymer

A rare combination of dual static and dynamic fluorescence quenching mechanisms is reported, while sensing the nitroexplosive trinitrotoluene (TNT) in water by a cationic conjugated copolymer PFPy. Since the fluorophore PFPy interacts with TNT in both ground state as well as the excited states, a greater extent of interaction is facilitated between PFPy and the TNT, as a result of which the magnitude of the signal is amplified remarkably. The existence of these collective sensing mechanisms provides additional advantages to the sensing process and enhances the sensing parameters, such as LoD and highly competitive sensing processes in natural water bodies irrespective of the pH and at ambient conditions. These outcomes involving dual sensing mechanistic pathways expand the scope of developing efficient sensing probes for toxic chemical analyte and biomarker detection, preventing environmental pollution and strengthening security at sensitive locations while assisting in early diagnosis of disease biomarkers.

Water-soluble ionic liquid as a fluorescent probe towards distinct binding and detection of 2,4,6-trinitrotoluene and 2,4,6-trinitrophenol in aqueous medium

Owing to the escalating threat of criminal activities and pollution aroused by 2,4,6-trinitrotoluene (TNT) and 2,4,6-trinitrophenol (TNP), development of a proficient sensor for the detection of these explosives is highly demanded. Herein, a water-soluble ionic liquid-tagged fluorescent probe, 1-ethyl-3-(3-formyl-4-hydroxybenzyl)-1H-benzimidazol-3-ium chloride (EB-IL) has been designed and synthesized for the detection of TNT and TNP in 100% aqueous medium. The EB-IL fluorescent probe displayed strong cyan-blue fluorescence at 500 nm which gets quenched upon the addition of TNT/TNP over other concomitant nitro-compounds. The distinct binding response of EB-IL towards TNT could be due to the formation of hydrogen bonding between the acidic proton of benzimidazolium (C2-H) and nitro group of TNT. Meanwhile, the selective binding of TNP with EB-IL could be due to the exchange of counter Cl^- anion of EB-IL with picrate anion. The fluorescence quenching of EB-IL by TNT could be attributed to the resonance energy transfer (RET) and that of TNP is ascribed to the anion-exchange process. The developed sensor is extremely selective and sensitive towards TNT and TNP with high quenching constants of 1.94 × 10⁵ M^-1 and 2.32 × 10⁶ M^-1 and shows a lower detection limit of 159 nM and 282 nM, respectively.

Selective Detection of Picric Acid and Pyrosulfate Ion by Nickel Complexes Offering a Hydrogen-Bonding-Based Cavity

This work describes the synthesis and characterization of three mononuclear nickel complexes supported with amide-based pincer ligands. All three complexes presented an H-bonding-based cavity due to the migration of amidic protons to the appended heterocyclic rings that formed H-bonds with the metal-ligated solvent molecule(s). These complexes functioned as the nanomolar chemosensors for the detection of picric acid and pyrosulfate ion as inferred by the detailed absorption and emission spectral studies while further supported with FTIR, NMR, and mass spectra of the isolated products. We also illustrate a few practical detection methods for the sensing of picric acid in the solution state as the naked-eye colorimetric methods and in the solid state by employing polystyrene films.

A "turn-off" fluorescent sensor based on electrospun polycaprolactone nanofibers and fluorene(bisthiophene) derivative for nitroaromatic explosive detection

The preparation of fluorene(bisthiophene)-based fluorescent nanofibers for nitroaromatic explosive detection provides a convenient rapid and low-cost strategy aiming at forensic applications. Polycaprolactone (PCL) and fluorene(bisthiophene) derivative (FBT) nanofibers were obtained by electrospinning technique as a free-standing mat and characterized by SEM, FTIR, thermal analysis and fluorescence spectroscopy. The PCL/FBT nanofibers presented high sensitivity towards 2,4,6-trinitrotoluene (TNT) and picric acid (PA), with fluorescence quenching (turn-off mechanism), and selectivity to another kind of explosives. The free-standing mats were used as a cloth strip that was swiped on surfaces contaminated with TNT traces allowing its visual detection under UV light source. These findings are particularly important for the development of a facile and promising strategy to assembly portable optical devices for nitroaromatic explosive detection.

Donor-Acceptor Type Covalent Organic Frameworks

Intermolecular charge transfer (ICT) effect has been widely studied in both small molecules and linear polymers. Covalently-bonded donor-acceptor pairs with tunable bandgaps and photoelectric properties endow these materials with potential applications in optoelectronics, fluorescent bioimaging, and sensors, etc. However, owing to the lack of charge transfer pathway or effective separation of charge carriers, unfavorable charge recombination gives rise to inevitable energy loss. Covalent organic frameworks (COFs) can be mediated with various geometry- and property-tailored building blocks, where donor (D) and acceptor (A) segments are connected by covalent bonds and can be finely arranged to form highly ordered networks (namely D-A COFs). The unique structural features of D-A COFs render the formation of segregated D-A stacks, thus provides pathways and channels for effective charge carriers transport. This review highlights the significant progress on D-A COFs over the past decade with emphasis on design principles, growing structural diversities, and promising application potentials.

Pyrrole-Embedded Linear and Helical Graphene Nanoribbons

Linear and helical graphene nanoribbons (L-PyGNR and H-PyGNR) bearing electron-rich pyrrole units have been synthesized by using the photochemical cyclodehydrochlorination (CDHC) reaction. The pyrrole units in the polymer backbone make the polymer electron-rich with moderate bandgap values and relatively high HOMO energy levels. The planarization of the pyrrole unit through cyclization yields a bandgap value almost 0.5 eV lower than that measured for polypyrrole. Conductivity values in the thin film up to 0.12 S/cm were measured for the chemically oxidized L-PyGNR (four-point method). Both GNRs showed excellent fluorescence sensing properties for TNT in solution with K_SV values up to 6.4 × 10⁶ M^-1.

Ultrastable Tb-Organic Framework as a Selective Sensor of Phenylglyoxylic Acid in Urine

Industrial pollution and harmful chemicals seriously affect environment and human health. Styrene is a common air toxicant with widespread exposure sources, including smoking, automobile exhaust, and plastic pollutants. Phenylglyoxylic acid (PGA) is a typical biomarker for exposed styrene. Therefore, it is crucial to quickly identify and quantitatively detect PGA. Herein, an ultrastable terbium metal-organic framework (Tb-MOF 1) was developed, and the luminescence film (1/PLA) consisting of polylactic acid (PLA) and 1 was fabricated as a sensor for rapid detection of PGA. The sensor possesses the advantages of efficient detection [limit of detection (LOD) is 1.05 × 10^-4 mg/mL] and rapid response speed (less than 10 s) for PGA in urine. Furthermore, this sensor exhibits high stability, outstanding anti-interference ability, and excellent recyclability. Based on this film technology, a paper-based probe was then developed for portable and convenient detection. The probe could easily distinguish different concentrations of PGA under the naked eye toward practical sensing applications. Meanwhile, photoinduced electron transfer was demonstrated to be responsible for the luminescence sensing. Hence, this study indicates that Tb-MOF is a promising material to detect PGA for evaluating the effect of styrene on the body.

A simple organic multi-analyte fluorescent prober: One molecule realizes the detection to DNT, TATP and Sarin substitute gas

The detections of explosives and chemical warfare agents (CWAs) are always important for global security. In this study, a simple donor (D)- acceptor (A) type small organic fluorescent triazole-based molecule (T1) is reported. T1 is composed of a central 4H-1, 2, 4-triazole (TAZ) "core" and three external triphenylamine (TPA) groups. Its spin-coating films can realize the multi-analyte fluorescent prober to detect DNT (2, 4-dinitrotoluene), hydrogen peroxide (H₂O₂, the substitute for triacetone triperoxide (TATP)) and diethylchlorophosphate (DCP, the substitute for Sarin) vapors. Additionally, the combination of the triple sensing mechanism in the different channels affords three distinct sets of output-signal responses, these three hazardous compounds could be identified rapidly with high sensitivity and selectivity: fluorescence turn-off response to DNT, fluorescence turn-on response to H₂O₂ and fluorometric-colorimetric dual-channel response to DCP. T1 fluorescent probe is highly advantageous for concurrently monitoring various hazardous target substances and simultaneously possessing the desirable sensitivity and selectivity, excellent reusability. Hereby, this study provides a prototype method to build novel multifunctional fluorescent probes to explosives and CWAs.

Lanthanide Metal-Organic Framework-Based Fluorescent Sensor Arrays to Discriminate and Quantify Ingredients of Natural Medicine

The discrimination and quantification of the ingredients from natural medicines are a challenging issue due to their complicated and various structures. Metal-organic frameworks (MOFs) have shown great promise in sensing applications. Here, we report a fluorescent sensor array for rapid identification of some natural compounds using a sensor array composed of four kinds of lanthanide (Eu³⁺ and Tb³⁺) fluorescent MOFs (Ln-MOFs), which have diversified fluorescent responses to 26 active/toxic compounds including 12 saponins, 7 flavonoids, 3 stilbenes, and 4 anthraquinones. The fluorescence of the Ln-MOFs after reaction with the compounds was summarized as datasets and processed by principle component analysis (PCA) and hierarchical cluster analysis (HCA) methods. The corresponding responses of the 4 types of compounds are well separated on 2D/3D PCA score plots and HCA dendrograms. We have also tested typical blind samples by concentration-dependent PCA, and an accuracy of 100% was obtained. In addition, the response mechanisms of the Ln-MOFs to the compounds were also studied. Compared with traditional methods using liquid chromatography-mass spectrometry, the developed fluorescent sensor array provides a more efficient and economic strategy to discriminate various active/toxic ingredients in natural medicine.

A New Compound for Sequential Sensing of Picric Acid and Aliphatic Amines: Physicochemical Details and Construction of Molecular Logic Gates

Picric acid (PA) at low concentration is a serious water pollutant. Alongside, aliphatic amines (AAs) add to the queue to pollute surface water. Plenty of reports are available to sense PA with an ultralow limit of detection (LOD). However, only a handful of works are testified to detect AAs. A new fluorescent donor-acceptor compound has been synthesized with inherent intramolecular charge transfer (ICT) character that enables selective and sensitive colorimetric quantitative detection of PA and AAs with low LODs in non-aqueous as well as aqueous solutions. The synthesized compound is based on a hemicyanine skeleton containing two pyridenylmethylamino groups at the donor and a benzothiazole moiety at the acceptor ends. The detailed mechanisms and reaction dynamics are explained spectroscopically along with computational support. The fluorescence property of the detecting compound changes due to protonation of its pyridinyl centers by PA leading to quenching of fluorescence and subsequently de-protonation by AAs to revive the signal. We have further designed logic circuits from the acquired optical responses by sequential interactions.

A novel high sensitive Cd-MOF fluorescent probe for acetone vapor in air and picric acid in water: Synthesis, structure and sensing properties

A novel three-dimensional luminescence Cd-MOF sensor with the molecular formula {[(CH₃)₂NH₂]₂ Cd₃(ptptc)₂} (complex 1) has been synthesized by using terphenyl-3,3',5,5'-tetracarboxylic acid (H₄ptptc) and Cd(NO₃)₂·4H₂O under solvothermal conditions. Single crystal X-ray diffraction analysis shows that complex 1 crystallizes in the monoclinic system C2/c space group and consists of one-dimensional channels. Complex 1 exhibits characteristic fluorescence emission (λ_em = 380 nm) both in solid state and solvents upon excitation at 300 nm. Real-time fluorescence quenching of complex 1 was observed in the fluorescence sensing of acetone vapor and picric acid. Intriguingly, ppm scale detection limit for acetone vapor in air and nano-mole scale detection limit for picric acid in water were observed. Moreover, good reusability and liner/nonlinear relationships were observed in the fluorescent titration.

Self-assembled porous nanoparticles based on silicone polymers with aggregation-induced emission for highly sensitive detection of nitroaromatics

Tetraphenylbenzene functionalized polysiloxane with AIE feature can self-assemble to unique porous structure and show high performance as fluorescent sensor.

A perylene monoimide probe based fluorescent micelle sensor for the selective and sensitive detection of picric acid

A hydroxyl functionalized perylene monoimide probe (PMI-OH) was prepared and self-assembled with the nonionic surfactant Triton X-100 (TX100) to fabricate a fluorescent micelle sensor for the selective and sensitive detection of picric acid (PA), a common explosive and environmental pollutant. The synthesized PMI-OH probe exhibited excimer fluorescence emission, and the intensity of the excimer fluorescence emission was significantly enhanced after the PMI-OH probe formed micelles with TX100. The obtained PMI-OH@TX100 micelles presented excellent photoluminescence properties and had a maximum fluorescence emission at 630 nm. The red fluorescence of the PMI-OH@TX100 micelles was quenched upon introduction of the nitro explosive PA due to electron transfer from the donor (PMI-OH) to the acceptor (PA). The fluorescence quenching of the fluorescent micelle sensor was proportional to the concentration of PA in the range of 2 to 10 μM. The limit of detection was 500 nM using 3σ/k. Thus, the developed PMI-OH@TX100 micelle sensor has great potential to detect PA in ordinary samples.

Aggregation-directed High Fidelity Sensing of Picric Acid by a Perylenediimide-based Luminogen

Widespread use of picric acid (PA) in chemical industries and deadly explosives poses dreadful impact on all living creatures as well as the natural environment and has raised global concerns that necessitate the development of fast and efficient sensing platforms. To address this issue, herein, we report a perylenediimide-peptide conjugate, PDI-1, for detection of PA in methanol. The probe displays typical aggregation caused quenching (ACQ) behaviour and exhibits a fluorescence "turn-off" sensory response towards PA which is unaffected by the presence of other interfering nitroaromatic compounds. The sensing mechanism involves PA induced aggregation of the probe into higher order tape like structures which leads to quenching of emission. The probe possesses a low detection limit of 5.6 nM or 1.28 ppb and a significantly high Stern-Volmer constant of 6.87×10⁴  M^-1 . It also exhibits conducting properties in the presence of PA vapours and thus represents a prospective candidate for vapour phase detection of PA. This is, to the best of our knowledge, the first example of a perylenediimide based probe that demonstrates extremely specific, selective and sensitive detection of PA and thus grasps the potential for application in practical scenarios.

Highly selective and sensitive fluorescent zeolitic imidazole frameworks sensor for nitroaromatic explosive detection

Nitroaromatic explosives, such as 2-4-6 trinitrotoluene (TNT) are dangerous materials that pose safety and environmental risks. Even though many sensors have been reported for the detection of nitroaromatic explosives, a facile, rapid, cost-effective sensor is still sought-after in the field. Here we demonstrate a facile and rapid method to synthesize a fluorescent metal-organic framework for the highly selective and sensitive detection of nitroaromatic explosives. Zeolitic imidazole framework-8 (ZIF-8) is synthesized and enhanced with fluorescent 8-hydroxyquinoline zinc (ZnQ). The synthesized material shows visible colour changes upon exposure to TNT from ivory to light red. In addition, fluorescence quenching is noted under UV illumination when the ZnQ@ZIF-8 is exposed to TNT. The ZnQ@ZIF-8-coated paper sensors show the highest fluorescence quenching at an emission wavelength of 455 nm with TNT concentration as low as 1 ppm. Therefore, the proposed strategy not only offers a fast and convenient protocol for selective detection of TNT but also offers great potential in practical applications, especially for airport/railway security inspection and prevention of terrorist attacks.

A reliable and facile fluorescent sensor from carbon dots for sensing 2,4,6-trinitrophenol based on inner filter effect

2,4,6-Trinitrophenol (TNP) has absorbed much concerns because of its toxic effect and threat on the environment, which results from the fact that it is an important and universal reagent widely utilized for manufacturing many products. It is of great necessity to explore facile and efficient methods for monitoring TNP. In present study, carbon dots (CDs), a new carbonaceous nanomaterial with strong fluorescence, was applied to build a novel sensor for highly sensitive and selective detection of TNP. In the sensing procedure, the fluorescence intensity of as-prepared CDs was diminished with the presence of TNP due to inner filter effect (IFE) quenching mechanism. The sensitivity of the fluorescent sensor was very high with limit of detection down to 5.37 ng mL^-1. This fluorescent sensor was evaluated and excellent spiked recoveries were gained, which demonstrated that the developed sensor would be a robust tool for environmental applications.

Atmospheric pressure chemical ionization mass spectrometry at low flow rates: Importance of ion source housing

RATIONALE

Hyphenation of atmospheric pressure chemical ionization (APCI) mass spectrometry with capillary and micro high-performance liquid chromatography (HPLC) is attractive for many applications, but reliable ion sources dedicated to these conditions are still missing. There are a number of aspects to consider when designing such an ion source, including the susceptibility of the ionization processes to ambient conditions. Here we discuss the importance of ion source housing for APCI at low flow rates.

METHODS

Selected compounds dissolved in various solvents were used to study ionization reactions at 10 μL/min flow rate. APCI spectra were generated using the Ion Max-S source (Thermo Fisher Scientific) operated with or without the ion source housing.

RESULTS

The APCI spectra of most compounds measured in the open and enclosed ion sources were markedly different. The differences were explained by water and oxygen molecules that entered the plasma region of the open ion source. Water tended to suppress charge transfer processes while oxygen diminished electron capture reactions and prevented the formation of acetonitrile-related radical cations useful for localizing double bonds in lipids. The effects associated with the ion source housing were significantly less important for compounds that are easy to protonate or deprotonate.

CONCLUSIONS

The use of ion source housing prevented alternative ionization channels leading to unwanted or unexpected ions. Compared with the conventional flow rate mode (1 mL/min), the effects of ambient air components were significantly higher at 10 μL/min, emphasizing the need for ion source housing in APCI sources dedicated to low flow rates.

Polyhydroquinoline nanoaggregates: A dual fluorescent probe for detection of 2,4,6-trinitrophenol and chromium (VI)

Fluorescent polyhydroquinoline (PHQ) derivative was fabricated utilizing one-pot engineered course. The PHQ derivative indicated aggregation induced emission enhancement (AIEE) with arrangement of nanoaggregates of size 11-13 nm in 95% watery DMF medium. The fluorescence emission of PHQ nanoaggregates was extinguished by including TNP and Cr (VI). They indicated prevalent fluorescence quenching towards both TNP and Cr (VI) over other meddling nitro-compounds and metal particles. In light of results got we presumed that both photo-induced fluorescence quenching of PHQ nanoaggregates by TNP, while Inner Filter Effect (IFE) was in charge of fluorescence quenching of PHQ nanoaggregates by Cr (VI). The PHQ nanoaggregates empowered identification of TNP and Cr (VI) down to 0.66 μM (TNP) and 0.28 μM (Cr (VI)). The use of PHQ nanoaggregates were reached out for location of TNP and Cr (VI) in genuine water tests.

Biomimetic Sensitive Elements for 2,4,6-Trinitrotoluene Tested on Multi-Layered Sensors

In spite of technological progress, most of the current techniques for 2,4,6-trinitrotoluene (TNT) detection are time consuming due to laborious sensor preparation. Thereby, the aim of this work was to enlarge the knowledge for preparing sensitive elements for TNT with the aid of molecular imprinting; a known technique used to deliver biomimetic materials. The study first depicts the auto-assembly mechanism of (TNT) with functional diamino-silanes (i.e., N-(2-aminoethyl)-3-aminopropyl methyl dimethoxysilane), via “double” Meisenheimer complexes. This mechanism is being described herein for the first time and applied further to obtain molecularly imprinted polymer (MIP) films for TNT recognition. For testing the potential application of films as chemical sensor elements, typical rebinding assays of TNT in a liquid state and the rebinding of TNT in a vapor state, using multilayered sensor chips composed of quartz-chromium (Cr)-gold (Au)-titanium oxide (TiO2), were employed. Batch rebinding experiments have shown that thinner films were more efficient on retaining TNT molecules in the first five min, with a specificity of about 1.90. The quartz-Cr-Au-TiO2-MIP capacitive sensors, tested in vapor state, registered short response times (less than 25 s), low sensitivity to humidity and high specificity for TNT.

A Facilely Synthesized Dual-State Emission Platform for Picric Acid Detection and Latent Fingerprint Visualization

To achieve a highly efficient, dual-state emission platform for picric acid (PA) detection and latent fingerprint (LFP) visualization, flexible alkyl chains have been facilely attached to the commercial organic dye 3,4,9,10-perylenetetracarboxylic dianhydride to provide the target perylenetetracarboxylate molecules PTCA-C4, PTCA-C6, and PTCA-C12. Interestingly, all these molecules exhibited impressive fluorescence characteristics with high photoluminescence quantum yields (PLQYs) of around 93.0 % in dilute solution. Also, emissive features were observed in the solid state because close molecular packing is prevented by the alkyl chains, especially for PTCA-C6, which has a high PLQY value of 49.0 %. Benefiting from its impressive fluorescence performance in both solution and as aggregates, PTCA-C6 was used as a dual-state emission platform for PA detection and also LFP visualization. For example, double-responsive fluorescence quenching in solution was observed in PA detection studies, resulting in high quenching constants (K_SV ) and also low limit-of-detection values. Furthermore, the fingerprint powder based on PTCA-C6 also presented an impressive performance on various substrates in terms of fluorescence intensity and resolution, clearly providing the specific fine details of latent fingerprints. These results demonstrate that the facilely synthesized PTCA-C6 with efficient dual-state emission exhibits great potential in the real-world applications of PA detection and LFP visualization.

The high selective chemo-sensors for TNP based on the mono- and di-substituted multifarene[2,2] with different fluorescence quenching mechanism

The chem-sensors, based on the triazole-CH₂-anthracene-functionalized multifarene[2,2] were successfully synthesized, which could efficiently and rapidly detect 2,4,6-trinitrophenol (TNP). The high specificities of the proposed macrocyclic sensors were achieved by selective response for TNP in the existence of other competing phenolic compounds, and the limits of detection in ∼10^-8 mol/L range were produced to confirm the high sensitivities of the chem-sensors, which could be attributed to the mechanism of electron and resonance energy transfer processes in the complexes with the supramolecular interactions. ¹H NMR titration analysis revealed the actual binding position should be the triazole rings of sensors with the hydroxyl group on TNP to offer a hydrogen bonding. The extraordinary sensing properties endued the compounds as sensitive fluorometric chem-sensors for the potential application of TNP detection.

Fluorescent chemosensors based on conjugated polymers with N-heterocyclic moieties: two decades of progress

A brief summary of representative fluorescent chemosensors based on conjugated polymers with N-heterocyclic moieties, followed by a discussion on the limitations and challenges of current systems, as well as possible future research directions.

Stepwise elucidation of fluorescence based sensing mechanisms considering picric acid as a model analyte

The precise study of fluorescence-based sensing mechanisms and a step-by-step design experiment for the elucidation of the mechanism of sensing for newly designed sensing systems can be ascertained using the presented tutorial review.

Dinuclear metal complexes: multifunctional properties and applications

Dinuclear metal complexes have enabled breakthroughs in OLEDs, photocatalytic water splitting and CO₂reduction, DSPEC, chemosensors, biosensors, PDT and smart materials.

Diversified AIE and mechanochromic luminescence based on carbazole derivative decorated dicyanovinyl groups: effects of substitution sites and molecular packing

Two positional isomers exhibited noticeable different luminescence properties, which were mainly attributed to their different molecular packing modes.

Aggregation-induced emission from the crowded coronal chains of block copolymer micelles

Aggregation-induced emission (AIE) was triggered via the spatial confinement in the coronal chains in block copolymers upon micellization, even with very low content of AIE groups attached, and this could be used to monitor the self-assembly process.

Ultratrace Nitroaromatic Vapor Detection via Surface-Enhanced Fluorescence on Carbazole-Terminated Black Silicon

Detection of nitroaromatic compounds (NACs) is an important applied task for environmental monitoring, medical diagnostics, and forensic analysis. However, detection of NAC vapors is challenging owing to their low vapor pressure and relatively weak sensitivity of the existing detection techniques. Here, we propose a novel concept to design fluorescence (FL) detection platforms based on chemical functionalization of nanotextured dielectric surfaces exhibiting resonant light absorption, trapping, and localization effects. We demonstrate highly-efficient NAC vapor sensor with selective FL-quenching response from monolayers of carbazole moieties covalently bonded to a spiky silicon surface, "black" silicon, produced over the centimeter-scale area using simple reactive ion etching. The sensor is shown to provide unprecedented ppt (10^-12) range limits of detection for several NAC vapors. Easy-to-implement scalable fabrication procedure combined with simple and versatile functionalization techniques applicable to all-dielectric surfaces make the suggested concept promising for realization of various gas sensing systems for social and environmental safety applications.