Conformational Changes of Polyamidoamine (PAMAM) Dendrimers Adsorbed on Silica Substrates

Biocompatible Macroion/Growth Factor Assemblies for Medical Applications

Growth factors are a class of proteins that play a role in the proliferation (the increase in the number of cells resulting from cell division) and differentiation (when a cell undergoes changes in gene expression becoming a more specific type of cell) of cells. They can have both positive (accelerating the normal healing process) and negative effects (causing cancer) on disease progression and have potential applications in gene therapy and wound healing. However, their short half-life, low stability, and susceptibility to degradation by enzymes at body temperature make them easily degradable in vivo. To improve their effectiveness and stability, growth factors require carriers for delivery that protect them from heat, pH changes, and proteolysis. These carriers should also be able to deliver the growth factors to their intended destination. This review focuses on the current scientific literature concerning the physicochemical properties (such as biocompatibility, high affinity for binding growth factors, improved bioactivity and stability of the growth factors, protection from heat, pH changes or appropriate electric charge for growth factor attachment via electrostatic interactions) of macroions, growth factors, and macroion-growth factor assemblies, as well as their potential uses in medicine (e.g., diabetic wound healing, tissue regeneration, and cancer therapy). Specific attention is given to three types of growth factors: vascular endothelial growth factors, human fibroblast growth factors, and neurotrophins, as well as selected biocompatible synthetic macroions (obtained through standard polymerization techniques) and polysaccharides (natural macroions composed of repeating monomeric units of monosaccharides). Understanding the mechanisms by which growth factors bind to potential carriers could lead to more effective delivery methods for these proteins, which are of significant interest in the diagnosis and treatment of neurodegenerative and civilization diseases, as well as in the healing of chronic wounds.

Effect of the Anchoring Layer and Transport Type on the Adsorption Kinetics of Lambda Carrageenan

The kinetics of lambda carrageenan (λ-car) adsorption/desorption on/from anchoring layers under diffusion- and convection-controlled transport conditions were investigated. The eighth generation of poly(amidoamine) dendrimers and branched polyethyleneimine possessing different shapes and polydispersity indexes were used for anchoring layer formation. Dynamic light scattering, electrophoresis, streaming potential measurements, optical waveguide lightmode spectroscopy, and quartz crystal microbalance were applied to characterize the formation of mono- and bilayers. The unique combination of the employed techniques enabled detailed insights into the mechanism of the λ-car adsorption mainly controlled by electrostatic interactions. The results show that the macroion adsorption efficiency is strictly correlated with the value of the final zeta potentials of the anchoring layers, the transport type, and the initial bulk concentration of the macroions. The type of the macroion forming the anchoring layer had a minor impact on the kinetics of λ-car adsorption. Besides significance to basic science, the results presented in this paper can be used for the development of biocompatible and stable macroion multilayers of well-defined electrokinetic properties and structure.

Layered double hydroxide-based antioxidant dispersions with high colloidal and functional stability

Highly stable antioxidant dispersions were designed on the basis of ring-opened ellagic acid (EA) intercalated into MgAl-layered double hydroxide (LDH) nanoparticles. The morphology of the composite was delicately modified with ethanolic washing to obtain EtOH-EA-LDH with a high specific surface area. The colloidal stability was optimized by surface functionalization with positively charged polyelectrolytes. Polyethyleneimine (PEI), protamine sulfate (PS) and poly(acrylamide-co-diallyl dimethyl ammonium chloride) (PAAm-co-DADMAC) was adsorbed onto the surface of the oppositely charged EtOH-EA-LDH leading to charge neutralization and overcharging at appropriate doses. Formation of adsorbed polyelectrolyte layers provided remarkable colloidal stability for the EtOH-EA-LDH. Modification with PEI and PAAm-co-DADMAC outstandingly improved the resistance of the particles against salt-induced aggregation with a critical coagulation concentration value above 1 M, while only limited stability was achieved by covering the nanoparticles with PS. The high antioxidant activity of EtOH-EA-LDH was greatly preserved upon polyelectrolyte coating, which was proved in the scavenging of radicals in the test reaction applied. Hence, an active antioxidant nanocomposite of high drug dose and remarkable colloidal stability was obtained to combat oxidative stress in systems of high electrolyte concentrations.

PAMAM-Based Dendrimers with Different Alkyl Chains Self-Assemble on Silica Surfaces: Controllable Layer Structure and Molecular Aggregation

Amphiphilic poly(amidoamine) (PAMAM) dendrimers are a well-known dendritic family due to their remarkable ability to self-assemble on solid surface. However, the relationship between molecular conformation (or adsorption kinetics) of a self-assembled layer and molecular amphiphilicity of such kind of dendrimer is still lacking, which limits the development of modulating self-assembling structures and surface functionality. With this in mind, we synthesized a series of amphiphilic PAMAM-based dendrimers, denoted as G₁C _n, with different alkyl chains ( n = 8, 12, and 16), and investigated the molecular aggregation on silica surfaces by means of quartz crystal microbalance with dissipation, atomic force microscopy, and contact angle. After rinsing, remaining adsorption amounts of G₁C₁₂ were higher than those of G₁C₈ at high concentrations, suggesting that G₁C₁₂ adlayers were more stable due to the stronger intermolecular hydrophobic interactions, whereas it preferred to adopt the intramolecular hydrophobic interactions for G₁C₁₆, with low adsorption amounts and unstable adlayers. Bilayer-like structures were inferred in G₁C₈ and G₁C₁₂ adlayers with loose conformation, whereas monolayer structures were likely to exist in the sparse adsorption film of G₁C₁₆. Our results provided more detailed understanding of the effect of molecular structure on the self-assembled structures of amphiphilic dendrimers on solid surfaces, shedding light on the controlled microstructure and wettability of functional surface by modulating the length of hydrophobic chains of dendrimers and a potential application of dendrimer-substrate combinations.

pH and generation dependent morphologies of PAMAM dendrimers on a graphene substrate

The adsorption of PAMAM dendrimers at solid/water interfaces has been extensively studied, and is mainly driven by electrostatic and van der Waals interactions between the substrate and the dendrimers. However, the pH dependence of the adsorption driven predominantly by the van der Waals interactions is poorly explored, although it is crucial for investigating the potentiality of these dendrimers in supercapacitors and surface patterning. Motivated by this aspect, we have studied the adsorption behavior of PAMAM dendrimers of generations 2 (G2) to 5 (G5) with pH and salt concentration variation, on a charge neutral graphene substrate, using fully atomistic molecular dynamics simulations. The instantaneous snapshots from our simulations illustrate that the dendrimers deform significantly from their bulk structures. Based on various structural property calculations, we classify the adsorbed dendrimer morphologies into five categories and map them to a phase diagram. Interestingly, the morphologies we report here have striking analogies with those reported in star-polymer adsorption studies. From the fractional contacts and other structural property analyses we find that the deformations are more pronounced at neutral pH as compared to high and low pH. Higher generation dendrimers resist deformation following the deformation trend, G2 > G3 > G4 > G5 at any given pH level. As the adsorption here is mainly driven by van der Waals interactions, we observe no desorption of the dendrimers as the salt molarity is increased, unlike that reported in the electrostatically driven adsorption studies.

Monolayers of poly(amido amine) dendrimers on mica - In situ streaming potential measurements

The deposition of poly(amido amine) dendrimers on mica at various pHs was studied by the atomic force microscopy (AFM) and in situ streaming potential measurements. Bulk characteristics of dendrimers were acquired by using the dynamic light scattering (DLS) and the laser Doppler velocimetry (LDV). The hydrodynamic radius derived from DLS measurements was 5.2nm for the ionic strength of 10^-2M and pH range 4-10. The electrophoretic mobility, the zeta potential and the number of electrokinetic charges per molecule were derived as a function of pH from the LDV measurements. It was revealed that the dendrimers are positively charged for pH up to 10. This promoted their deposition on negatively charged mica substrate whose kinetics was quantitatively evaluated by direct AFM imaging and streaming potential measurements interpreted in terms of the electrokinetic model. The desorption kinetics of dendrimers under flowing conditions from monolayers of various coverage was also studied. It was revealed that dendrimer deposition was partially reversible for pH above 5.8. The acid-base properties of the dendrimer monolayers deposited on mica were characterized.

Molecular recognition of nucleic acids by nucleolipid/dendrimer surface complexes

We show for the first time that 1,2-dilauroyl-sn-glycero-3-phosphatidyladenosine nucleolipid surface complexes with cationic poly(amidoamine) dendrimers can be used to selectively bind DNA including oligonucleotides. This molecular recognition has high potential for applications involving biomedical and bioanalytic devices as well as drug delivery systems based on nucleic acids.

Polyelectrolyte adsorption, interparticle forces, and colloidal aggregation

This review summarizes the current understanding of adsorption of polyelectrolytes to oppositely charged solid substrates, the resulting interaction forces between such substrates, and consequences for colloidal particle aggregation. The following conclusions can be reached based on experimental findings. Polyelectrolytes adsorb to oppositely charged solid substrates irreversibly up to saturation, whereby loose and thin monolayers are formed. The adsorbed polyelectrolytes normally carry a substantial amount of charge, which leads to a charge reversal. Frequently, the adsorbed films are laterally heterogeneous. With increasing salt levels, the adsorbed mass increases leading to thicker and more homogeneous films. Interaction forces between surfaces coated with saturated polyelectrolyte layers are governed at low salt levels by repulsive electric double layer interactions, and particle suspensions are stable under these conditions. At appropriately high salt levels, the forces become attractive, principally due to van der Waals interactions, but eventually also through other forces, and suspensions become unstable. This situation can be rationalized with the classical theory of Derjaguin, Landau, Verwey, and Overbeek (DLVO). Due to the irreversible nature of the adsorption process, stable unsaturated layers form in colloidal particle suspensions at lower polyelectrolyte doses. An unsaturated polyelectrolyte layer can neutralize the overall particle surface charge. Away from the charge reversal point, electric double layer forces are dominant and particle suspensions are stable. As the charge reversal point is approached, attractive van der Waals forces become important, and particle suspensions become unstable. This behaviour is again in line with the DLVO theory, which may even apply quantitatively, provided the polyelectrolyte films are sufficiently laterally homogeneous. For heterogeneous films, additional attractive patch-charge interactions may become important. Depletion interactions may also lead to attractive forces and suspension destabilization, but such interactions become important only at high polyelectrolyte concentrations.

Response of adsorbed polyelectrolyte monolayers to changes in solution composition

Reflectometry and quartz crystal microbalance are used to study the response of adsorbed polyelectrolyte monolayers to solutions of variable composition. These techniques respectively yield the dry and wet masses of the adsorbed layer, and by combing these results, one obtains the water content and the thickness of the polyelectrolyte films. The systems investigated are films of adsorbed poly(allyl amine) (PAH) and poly-L-lysine (PLL) on silica and films of poly(styrene sulfonate) (PSS) on amino-functionalized silica. When such films are adsorbed from concentrated polyelectrolyte solutions containing high levels of salt, they are found to swell reversibly up to a factor of 2 when incubated in solutions of low salt. This swelling is attributed to the strengthening of repulsive electrostatic interactions between the adsorbed polyelectrolyte chains. PAH films may also swell upon decrease of pH, and collapse upon a pH increase. This transition shows a marked hysteresis and can be rationalized by the competition of electrostatic repulsions between the chains and their attraction to the surface. The presently observed swelling phenomena are caused by a collective process driven by the electrostatic repulsion between the densely adsorbed polyelectrolyte chains. Such responsive layers are only obtained by adsorption from high polyelectrolyte and salt concentrations. Layers absorbed at low polyelectrolyte and salt concentrations show only minor swelling effects, since the adsorbed polyelectrolytes layers are dilute and the adsorbed polyelectrolyte chains interact only weakly.