Probing Segmental Dynamics of Polymer Glasses during Tensile Deformation with Dielectric Spectroscopy

Mapping the Nanoscale Heterogeneous Responses in the Dynamic Acceleration of Deformed Polymer Glasses

Understanding the evolution of local structure and mobility of disordered glassy materials induced by external stress is critical in modeling their mechanical deformation in the nonlinear regime. Several techniques have shown acceleration of molecular mobility of various amorphous glasses under macroscopic tensile deformation, but it remains a major challenge to visualize such a relationship at the nanoscale. Here, we employ a new approach based on atomic force microscopy in nanorheology mode for quantifying the local dynamic responses of a polymer glass induced by nanoscale compression. By increasing the compression level from linear elastic to plastic deformation, we observe an increase in the mechanical loss tangent (tan δ), evidencing the enhancement of polymer mobility induced by large stress. Notably, tan δ images directly reveal the preferential effect of the large compression on the dynamic acceleration of nanoscale heterogeneities with initially slow mobility, which is clearly different from that induced by increasing temperature.

Microscopic Observation of the Anisotropy of the Johari-Goldstein-β Process in Cross-Linked Polybutadiene on Stretching by Time-Domain Interferometry

The strain dependence of the Johari-Goldstein (JG)-β relaxation time, as well as the directional dependence, was systematically investigated for stretched cross-linked polybutadiene using time-domain interferometry. We found that the strain dependence of the JG-β relaxation time is directionally dependent, contrary to expectation: the relaxation time of the JG-β motion, whose displacement is perpendicular to the stretching direction, decreases with stretching, whereas the relaxation time of the parallel JG-β motion changes little. This result is distinct from the previously reported strain dependence of the α relaxation time, where the relaxation time increases isotropically with stretching. Thus, the difference in the strain dependence of the relaxation time between the α and JG-β processes suggests a microscopic origin and requires the modification of the conventional dynamic picture for stretched polymers.

Simultaneous memory effects in the stress and in the dielectric susceptibility of a stretched polymer glass

We report experimental evidence that a polymer stretched at constant strain rate λ[over ̇] presents complex memory effects after λ[over ̇] is set to zero at a specific strain λ_{w} for a duration t_{w}, ranging from 100s to 2.2×10^{5}s. When the strain rate is resumed, both the stress and the dielectric constant relax to the unperturbed state nonmonotonically. The relaxations depend on the observable, on λ_{w} and on t_{w}. Relaxation master curves are obtained by scaling the time and the amplitudes by ln(t_{w}). The dielectric evolution also captures the distribution of the relaxation times, so the results impose strong constraints on the relaxation models of polymers under stress and they can be useful for a better understanding of memory effects in other disorder materials.

Durably Ductile, Transparent Polystyrene Based on Extensional Stress-Induced Rejuvenation Stabilized by Styrene-Butadiene Block Copolymer Nanofibrils

The glassy polymer of polystyrene (PS) enjoys a good reputation as a promising optical material; however, the inherent brittleness hinders its further applications. Conventional toughening methods are realized based on the premise of a sacrifice in transparency and stiffness. In this work, we found an unprecedented strategy to address these obstacles by combining extensional stress-induced ductility and suppressing physical aging. PS-based film with a high stiffness, long-term ductility, and excellent transparency is achieved by introducing a styrene-butadiene block copolymer into the PS matrix and subsequently annealing stretched. A nanofibrillar structure of the polybutadiene (PB) phase is formulated surrounded by a PS matrix, and thus, the elongation at break enhances from 3.1% up to 86.8%, accompanying the yield strength enhanced from 25.5 to 62.2 MPa. More significantly, compared with neat PS, these films survive from physical aging and persistent ductility over time. The morphology deformation induced by stress makes an obvious contribution to the improvement of transparency. Investigating the dynamics of chain segments indicates that the incorporation of the copolymer can restrict rearrangement and local relaxation to the PS chain. This work could pave a potential route toward high-performance PS and might be transferable to other glassy polymers with a fragile character.

Influence of Interfacial Bonding on the Mechanical and Impact Properties Ring-Opening Metathesis Polymer (ROMP) Silica Composites

Polymers formed by ring-opening metathesis polymerization (ROMP) such as poly(dicyclopentadiene) (pDCPD) exhibit a technologically desirable combination of high toughness, high glass transition temperature, and outstanding low-temperature performance. However, because of their nonpolar molecular structure, they tend to suffer from relatively low elastic moduli and poor adhesion to common fillers, fibers, and substrates, limiting their utility as adhesives and composite binders without specialized bonding agents. Here, we investigate the mechanical properties of a pDCPD-based copolymer filled with well-defined spherical microparticles having four distinct surface chemistries capable of strong, moderate, or weak bonding to the matrix with surfaces ranging from polar to nonpolar. Measurements in uniaxial tension, quasi-static fracture, and high-velocity impact are complemented by digital image correlation (DIC), scanning electron microscopy (SEM) fractography, and X-ray computed tomography (X-μCT) of subcritically loaded crack tips, yielding insight into the complex roles played by interfacial bonding in strength, stiffness, and toughening mechanisms of an already tough polymer. Analysis using quantitative fracture and impact mechanism models provided valuable guidelines for designing heterogeneous systems that combine structural and tough performance.

Dynamical heterogeneities and mechanical non-linearities: Modeling the onset of plasticity in polymer in the glass transition

In this paper we focus on the role of dynamical heterogeneities on the non-linear response of polymers in the glass transition domain. We start from a simple coarse-grained model that assumes a random distribution of the initial local relaxation times and that quantitatively describes the linear viscoelasticity of a polymer in the glass transition regime. We extend this model to non-linear mechanics assuming a local Eyring stress dependence of the relaxation times. Implementing the model in a finite element mechanics code, we derive the mechanical properties and the local mechanical fields at the beginning of the non-linear regime. The model predicts a narrowing of distribution of relaxation times and the storage of a part of the mechanical energy --internal stress-- transferred to the material during stretching in this temperature range. We show that the stress field is not spatially correlated under and after loading and follows a Gaussian distribution. In addition the strain field exhibits shear bands, but the strain distribution is narrow. Hence, most of the mechanical quantities can be calculated analytically, in a very good approximation, with the simple assumption that the strain rate is constant.