Renewable Biobased Polymeric Materials: Facile Synthesis of Itaconic Anhydride-Based Copolymers with Poly(l-lactic acid) Grafts

Dual-Cure Adhesives Using a Newly Synthesized Itaconic Acid-Based Epoxy Acrylate Oligomer

Herein, a novel biomass-derived itaconic acid (IA)-based epoxy acrylate oligomer (EAO) is synthesized by means of the esterification reaction of the epoxy group of bisphenol A diglycidyl ether (BADGE) with the carboxylic group of IA. The detailed chemical structure of the as-prepared bisphenol A diglycidyl ether diitaconate (BI) is characterized via the KOH value, FT-IR spectrum, and 1H-NMR spectrum. Further, a dual-cure adhesive system is formulated using BADGE, acrylic acid, and trimethylolpropane triacrylate with various BI contents, and the adhesive performance is investigated by measuring the thermal stability, adhesive properties, pencil hardness, and surface energy properties. Thus, the dual-cure adhesive with a BI content of 0.3 mol is shown to provide excellent thermal stability, along with an adhesive strength of 10.7 MPa, a pencil hardness of 2H, and a similar surface energy to that of a typical polycarbonate film. In addition, the properties of the BI-based dual-cure adhesive are compared with those of the dual-cure adhesives based on bisphenol A glycerolate diacrylate or bisphenol A glycerolate dimethacrylate.

Degradation of Polymer-Drug Conjugate Nanoparticles Based on Lactic and Itaconic Acid

Tuberculosis (TB) is still a significant threat to human health. A promising solution is engineering nanoparticulate drug carriers to deliver anti-TB molecules. Itaconic acid (ITA) potentially has anti-TB activity; however, its incorporation in nanoparticles (NP) is challenging. Here we show an approach for preparing polymer-ITA conjugate NPs and a methodology for investigating the NP degradation and ITA release mechanism. The conjugate was synthesized by the two-directional growing of polylactic acid (PLA) chains, followed by capping their extremities with ITA. The poly(lactate)-itaconate PLA-ITA was then used to formulate NPs. The degradation and drug release processes of the polymer conjugate NPs were studied qualitatively and quantitatively. The molecular structures of released species were characterized by using liquid NMR spectroscopy and mass spectrometry. We discovered a complex NP hydrolysis process forming diverse oligomers, as well as monomeric lactic acid (LA) and drug ITA. The slow degradation process led to a low release of free drugs, although raising the pH from 5.3 to 7.4 induced a slight increase in the amounts of released products. TEM images showed that bulk erosion is likely to play the primary role in the degradation of PLA-ITA NPs. The overall results and methodology can be of interest for understanding the mechanisms of NP degradation and drug release of this new polymer-drug conjugate system.

Computational Approach to the Surface-Crosslinking Process of Superabsorbent Polymer via Central Composite Design

The improvement of gel strength and absorption properties through the surface-crosslinking of superabsorbent polymers (SAPs) is essential for sanitary industry applications. We prepared core-SAP via aqueous solution copolymerization, and then surface-crosslinked the core-SAP under various conditions. The structure of the SAP was characterized using Fourier transform infrared (FT-IR) spectroscopy. Central composite design (CCD) of response surface methodology (RSM) has been applied to determine the optimum surface-crosslinking conditions such as surface-crosslinker content, reaction temperature, and reaction time. The optimal surface-crosslinking conditions were identified at a surface-crosslinker content of 2.22 mol%, reaction temperature of 160 °C, and reaction time of 8.7 min. The surface-crosslinked SAP showed excellent absorbency under load of 50 g/g with a permeability of 50 s. Other absorption properties were also evaluated by measuring the free absorbency and centrifuge retention capacity in saline solution.

Optimizing Hydrolysis Resistance and Dispersion Characteristics via Surface Modification of Aluminum Nitride Powder Coated with PVP-b-P(St-alt-ITA) Copolymer

Developing new coating modification technology of aluminum nitride (AlN) powder for higher hydrolysis resistance is the key to prepare high-performance AlN ceramic substrate with water-based wet process in the future. In the this paper, The poly(vinyl pyrrolidone)-b-poly(Styrene/Itaconic anhydride) (PVP-b-P(St/ITA))block copolymer with PVP as the independent chain segment was designed and synthesized through reversible addition fragmentation chain transfer (RAFT) polymerization, which was used for the study on coating modification, hydrolysis resistance, and dispersion performance of AIN powder. The study results show that, when using PVP macromolecular chain transfer agent (PVP-CTA) for the RAFT chain extension and polymerization in St/ITA binary system, the molecular weight increases linearly and the molecular weight distribution tends to decrease with the monomer conversion rate, which is in line with the activity-controlled characteristics of RAFT polymerization. The copolymer PVP-b-P(St/ITA) was used to for surface modification treatment of submicron AlN powder to generate esterification reaction, which was absorbed and bound to the powder surface. Hydrolysis resistance and dispersion experiments were conducted for modified powder, and the crystal phase and micro structure of modified powder were analyzed and observed through XRD, SEM, and TEM. It was found that copolymer modification had no effect on the powder crystal phase. A 8-21 nm passivation layer was coated on the surface, which can exist stably for 10 h in 60 °C water. Zeta potential and laser particle analyzer tests showed that modified powder featured excellent water-based slurry dispersion performance, and certain self-dispersing characteristics. The highest Zeta potential appeared in pH 6~7, and the particle granularity was distributed uniformly with the median particle diameter of 875 nm. The powder hydrolysis resistance and dispersion performance are significantly improved.

Syntheses of polylactides by means of tin catalysts

Reaction mechanisms and synthetic methods used for the preparation of homo- and copolylactides based on tin(ii) and tin(iv) catalysts are reviewed.

Incorporation of Poly(Itaconic Acid) with Quaternized Thiazole Groups on Gelatin-Based Films for Antimicrobial-Active Food Packaging

Poly(itaconic acid) (PIA) was synthesized via conventional radical polymerization. Then, functionalization of PIA was carried out by an esterification reaction with the heterocyclic groups of 1,3-thiazole and posterior quaternization by N-alkylation reaction with iodomethane. The modifications were confirmed by Fourier transform infrared (FTIR) and proton nuclear magnetic resonance (1H-NMR), as well as ζ-potential measurements. Their antimicrobial activity was tested against different Gram-negative and Gram-positive bacteria. After characterization, the resulting polymers were incorporated into gelatin with oxidized starch and glycerol as film adjuvants, and dopamine as crosslinking agent, to develop antimicrobial-active films. The addition of quaternized polymers not only improved the mechanical properties of gelatin formulations, but also decreased the solution absorption capacity during the swelling process. However, the incorporation of synthesized polymers increased the deformation at break values and the water vapor permeability of films. The antioxidant capacity of films was confirmed by radical scavenging ability and, additionally, those films exhibited antimicrobial activity. Therefore, these films can be considered as good candidates for active packaging, ensuring a constant concentration of the active compound on the surface of the food, increasing products' shelf-life and reducing the environmental impact generated by plastics of petrochemical origin.

Biobased Poly(itaconic Acid-co-10-Hydroxyhexylitaconic Acid)s: Synthesis and Thermal Characterization

Renewable vinyl compounds itaconic acid (IA) and its derivative 10-hydroxyhexylitaconic acid (10-HHIA) are naturally produced by fungi from biomass. This provides the opportunity to develop new biobased polyvinyls from IA and 10-HHIA monomers. In this study, we copolymerized these monomers at different ratios through free radical aqueous polymerization with potassium peroxodisulfate as an initiator, resulting in poly(IA-co-10-HHIA)s with different monomer compositions. We characterized the thermal properties of the polymers by thermogravimetric analysis (TGA) and Fourier-transform infrared spectroscopy (FT-IR). The nuclear magnetic resonance analysis and the gel permeation chromatography showed that the polymerization conversion, yield, and the molecular weights (weight-averaged Mw and number-averaged Mn) of the synthesized poly(IA-co-10-HHIA)s decreased with increasing 10-HHIA content. It is suggested that the hydroxyhexyl group of 10-HHIA inhibited the polymerization. The TGA results indicated that the poly(IA-co-10-HHIA)s continuously decomposed as temperature increased. The FT-IR analysis suggested that the formation of the hydrogen bonds between the carboxyl groups of IA and 10-HHIA in the polymer chains was promoted by heating and consequently the polymer dehydration occurred. To the best of our knowledge, this is the first time that biobased polyvinyls were synthesized using naturally occurring IA derivatives.

Nanofiller Reinforced Biodegradable PLA/PHA Composites: Current Status and Future Trends

The increasing demand for environmental protection has led to the rapid development of greener and biodegradable polymers, whose creation provided new challenges and opportunities for the advancement of nanomaterial science. Biodegradable polymer materials and even nanofillers (e.g., natural fibers) are important because of their application in greener industries. Polymers that can be degraded naturally play an important role in solving public hazards of polymer materials and maintaining ecological balance. The inherent shortcomings of some biodegradable polymers such as weak mechanical properties, narrow processing windows, and low electrical and thermal properties can be overcome by composites reinforced with various nanofillers. These biodegradable polymer composites have wide-ranging applications in different areas based on their large surface area and greater aspect ratio. Moreover, the polymer composites that exploit the synergistic effect between the nanofiller and the biodegradable polymer matrix can lead to enhanced properties while still meeting the environmental requirement. In this paper, a broad review on recent advances in the research and development of nanofiller reinforced biodegradable polymer composites that are used in various applications, including electronics, packing materials, and biomedical uses, is presented. We further present information about different kinds of nanofillers, biodegradable polymer matrixes, and their composites with specific concern to our daily applications.

PAA-g-PLA amphiphilic graft copolymer: synthesis, self-assembly, and drug loading ability

This article reports the synthesis of a PAA-g-PLA amphiphilic polymer by the combination of RAFT polymerization and organocatalytic ROP, which could self-assemble into spheres in aqueous media for sustained release of doxorubicin.

Tailoring chain structures of l-lactide and ε-caprolactone copolyester macromonomers using rac-binaphthyl-diyl hydrogen phosphate-catalyzed ring-opening copolymerization with monomer addition strategy

rac-BNPH catalyzed ring-opening copolymerization of l-lactide and ε-caprolactone with monomer addition strategy effectively tailoring chain structures of macromonomers.

Polylactic acid macromonomer radical propagation kinetics and degradation behaviour

Polylactic acid (PLA) macromonomer radical homopropagation rate coefficients are evaluated as a function of average macromonomer chain length. Hydrolysis studies of nanoparticles (NP) produced from PLA macromonomers demonstrate the importance of end-group functionality on NP degradation time.

Sustainable biobased blends of poly(lactic acid) (PLA) and poly(glycerol succinate-co-maleate) (PGSMA) with balanced performance prepared by dynamic vulcanization

A sustainable and industrially viable method for toughening poly(lactic acid) by dynamic vulcanization using glycerol and succinic acid based polyesters.

Synthesis of an amphiphilic graft copolymer bearing a hydrophilic poly(acrylate acid) backbone for drug delivery of methotrexate

This article reports the synthesis of a PAA-g-PLA amphiphilic graft polymer, which could self-assemble into large compound micelles in aqueous media for sustained release of MTX.

Challenges in the production of itaconic acid by metabolically engineered Escherichia coli

Metabolic engineering allows the production of a variety of high-value chemicals in heterologous hosts. For example, itaconic acid (IA) has been produced in several microorganisms, such as Escherichia coli, Aspergillus niger, and Synechocystis sp. through the expression of cis-aconitate decarboxylase gene (cad) from Aspergillus terreus. Recently, we showed that inactivation of the isocitrate dehydrogenase gene and overexpression of the aconitase gene dramatically enhanced the production levels of IA in E. coli expressing cad. Furthermore, we demonstrated that it is possible to produce IA directly from starch by engineered E. coli that additionally expresses the α-amylase gene from Streptococcus bovis. In this study, we sum up our findings regarding the challenges of IA production in E. coli.

Lignocellulosic biomass: a sustainable platform for the production of bio-based chemicals and polymers

The ongoing research activities in the field of lignocellulosic biomass for production of value-added chemicals and polymers that can be utilized to replace petroleum-based materials are reviewed.

PLA architectures: the role of branching

Biobased and biodegradable polymers have become more and more interesting in view of waste management and crude oil depletion.

Environmentally benign synthesis of saturated and unsaturated aliphatic polyesters via enzymatic polymerization of biobased monomers derived from renewable resources

Biobased saturated aliphatic polyesters and photo-curable unsaturated aliphatic polyesters are enzymatically polymerized, and their structure–property relationships are systematically studied.

Stable biocompatible cross-linked fluorescent polymeric nanoparticles based on AIE dye and itaconic anhydride

Self-assembly of polymeric materials to form nanoparticles is a particularly promising strategy for various biomedical applications, however, these self-assembling systems often encounter the critical micelle concentration (CMC) issue, as the nanoparticles is usually unstable at low concentration. Therefore, stable cross-linked fluorescent polymeric nanoparticles (FPNs) were covalently constructed from an aggregation induced emission (AIE) dye, itaconic anhydride, poly(ethylene glycol) monomethyl ether methacylate and polyethylenimine. These obtained PhE-ITA-20%(80%) FPNs were fully characterized by a series of techniques including (1)H NMR spectra, UV-vis absorption spectra, fluorescence spectra, FT-IR spectra, transmission electron microscopy, gel permeation chromatography, and dynamic light scattering. Such FPNs emitted intense fluorescence due to the introduction of aggregation induced emission dye. More importantly, the FPNs were found extremely stable in physiological solution even below the CMC owing to their cross-linked architectures. Biocompatibility evaluation and cell uptake behavior of the FPNs were further investigated to explore their potential biomedical applications, the demonstrated excellent biocompatibility made them promising for cell imaging.

Precision synthesis of bio-based acrylic thermoplastic elastomer by RAFT polymerization of itaconic acid derivatives

Bio-based polymer materials from renewable resources have recently become a growing research focus. Herein, a novel thermoplastic elastomer is developed via controlled/living radical polymerization of plant-derived itaconic acid derivatives, which are some of the most abundant renewable acrylic monomers obtained via the fermentation of starch. The reversible addition-fragmentation chain-transfer (RAFT) polymerizations of itaconic acid imides, such as N-phenylitaconimide and N-(p-tolyl)itaconimide, and itaconic acid esters, such as di-n-butyl itaconate and bis(2-ethylhexyl) itaconate, are examined using a series of RAFT agents to afford well-defined polymers. The number-average molecular weights of these polymers increase with the monomer conversion while retaining relatively narrow molecular weight distributions. Based on the successful controlled/living polymerization, sequential block copolymerization is subsequently investigated using mono- and di-functional RAFT agents to produce block copolymers with soft poly(itaconate) and hard poly(itaconimide) segments. The properties of the obtained triblock copolymer are evaluated as bio-based acrylic thermoplastic elastomers.