Semicrystalline Polyesters Based on a Novel Renewable Building Block

Biodegradable copolyesters based on a “soft” isohexide building block with tunable viscoelasticity and self-adhesiveness

PBIA copolyesters synthesised using a novel glycosylated monomer (IIDMC) have faster degradation and tunable self-adhesiveness.

Copolymerization of Natural Camphor-Derived Rigid Diol with Various Dicarboxylic Acids: Access to Biobased Polyesters with Various Properties

In this work, alicyclic (1R,3S)-1,2,2-trimethylcyclopentane-1,3-dimethanol (TCDM), derived from natural camphor, was copolymerized with linear α,ω-diacids, terephthalic acid (TPA), and 2,5-furandicarboxylic acid (FDCA), affording a series of polyesters with functional properties. 2D NMR spectroscopy revealed that the stereoconfiguration of TCDM was preserved after polymerization. The TCDM polyester based on TPA showed high thermostability, high T_g value (115 °C), high modulus (1.3 GPa), and high ultimate strength (29.8 MPa). The TCDM polyester based on 1,4-succinic acid exhibited excellent ductility and resilience. Lastly, the rigidity analysis based on van Krevelen's group contribution method, coupled with the comparisons between TCDM- and sugar-based polyesters, confirmed that TCDM is a highly reactive and rigid diol. Results indicate that TCDM polyesters are suitable for a wide range of applications, including hot-filled containers and transparent packaging materials. This work addresses some critical needs for high performance biopolymers such as achieving high T_g values, high thermostability, and high transparency.

Copolycarbonates Based on a Bicyclic Diol Derived from Citric Acid and Flexible 1,4-Cyclohexanedimethanol: From Synthesis to Properties

Octahydro-2,5-pentalenediol (OPD), is a compelling citric acid-based bicyclic diol with excellent rigidity and thermal stability. Herein, a series of copolycarbonates (co-PCs) were synthesized, starting from OPD, 1,4-cyclohexanedimethanol (CHDM), and diphenyl carbonate (DPC). All polycarbonates are amorphous with glass transition temperatures increased when increasing the content in OPD units. Dynamic mechanical analysis (DMA) revealed the sub T_g β-relaxations at low temperatures originating from the CHDM conformational transition, indicative of the possibility of impact-resistance. Morphological analysis of the fracture surfaces revealed the toughening mechanism under tensile was shear yielding of the matrix triggered by internal cavitation. The incorporation of OPD steadily increased the Young's modulus, from 482 to 757 MPa, with the OPD fraction increased from 0 to 30 mol %. As the OPD content further increased, a "ductile-to-brittle" transition occurred due to the low number-average molecular weight (M_n) and the low entangled strand density (high entanglement molecular weight).

Isohexide Dinitriles: A Versatile Family of Renewable Platform Chemicals

Building blocks of isohexides extended by one carbon atom at the 2- or 5-positions are now synthetically accessible by a convenient, selective, base-catalyzed epimerization of the corresponding dinitriles. Kinetic experiments using the strong organic base 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) show that all three possible isohexide dinitrile isomers exist within a dynamic equilibrium. An epimerization mechanism based on density functional theory (DFT) calculations is proposed. Structural identification of all three possible isomers is based on NMR analysis and single crystal x-ray crystallography. DFT calculations confirm that the observed crystal structures are indeed the lowest energy conformers of these isohexide derivatives.

Aromatic poly(ether ester)s derived from a naturally occurring building block nipagin and linear aliphatic α,ω-diols

Poly(ether ester) materials were synthesized from renewable nipagin and linear aliphatic α,ω-diols, and the thermal, crystalline and mechanical properties were investigated.

New biosourced AA and AB monomers from 1,4:3,6-dianhydrohexitols, Isosorbide, Isomannide, and Isoidide

In the present work, we propose the synthesis of a new family of sugar derived 1,4:3,6-dianhydrohexitol based AA/AB-type monomers. Unprecedented diacids based on Isomannide and Isoidide were elaborated with high yields and showed interestingly high melting point ranges (240–375 °C). Optimization of reaction conditions (temperature, time of reaction, and reactant ratios) has been investigated to synthesize the key intermediate of a set of AB monomers with acid, ester, and acid chloride functionalities. Isosorbide based ether benzoic acid AB monomer was polymerized and characterized by NMR and DSC techniques. The results show a semicrystalline behavior of the obtained polymer thanks to the controlled stereoregular arrangement of the AB starting monomer.

Enzymatic synthesis of 2,5-furandicarboxylic acid-based semi-aromatic polyamides: enzymatic polymerization kinetics, effect of diamine chain length and thermal properties

Sustainable FDCA-based semi-aromatic polyamides are produced via enzymatic polymerization. The enzymatic polymerization kinetics, effect of diamine chain length, and thermal properties of the resulting polyamides are investigated.

Toughened aromatic poly-(decylene terephthalate) copolyesters with two renewable eugenol-based components via a random copolymerization method

We synthesized two series of poly-(decylene terephthalate) copolyesters toughened with two renewable eugenol-based components, and the best results belong to PDT80%M120% and PDT80%M220% copolyesters.

A biocatalytic approach towards sustainable furanic–aliphatic polyesters

A series of sustainable furanic–aliphatic polyesters and oligoesters is successfully producedvia Candida antarcticaLipase B-catalyzed polymerization of biobased dimethyl 2,5-furandicarboxylate with various (potentially) renewable aliphatic diols.

A high-molecular-weight and high-Tg poly(ester carbonate) partially based on isosorbide: synthesis and structure–property relationships

A new family of high-molecular-weight and high T_g poly(ester carbonate)s partially based on renewable isosorbide were prepared by incorporating 1,4-butanediol and dimethyl terephthalate into poly(isosorbide carbonate).

Towards sugar-derived polyamides as environmentally friendly materials

As part of our ongoing study investigating isohexide-based polyamides, we have synthesized isosorbide(bis(propan-1-amine)) (DAPIS) and studied its reactivity in the polymerization towards fully biobased polyamides.

Semi-aromatic polyesters based on a carbohydrate-derived rigid diol for engineering plastics

New carbohydrate-based polyesters were prepared from isoidide-2,5-dimethanol (extended isoidide, XII) through melt polymerization with dimethyl esters of terephthalic acid (TA) and furan-2,5-dicarboxylic acid (FDCA), yielding semi-crystalline prepolymers. Subsequent solid-state post-condensation (SSPC) gave high molecular weight (Mn =30 kg mol(-1) for FDCA) materials, the first examples of high Mn , semi-aromatic homopolyesters containing isohexide derivatives obtained via industrially relevant procedures. NMR spectroscopy showed that the stereo-configuration of XII was preserved under the applied conditions. The polyesters are thermally stable up to 380 °C. The TA- and FDCA-based polyesters have high Tg (105 °C and 94 °C, resp.) and Tm (284 °C and 250 °C, resp.) values. Its reactivity, stability, and ability to afford high Tg and Tm polyesters make XII a promising diol for the synthesis of engineering polymers.

Synthesis and characterization of biobased isosorbide-containing copolyesters as shape memory polymers for biomedical applications

Novel biobased isosorbide-containing copolyesters (PBISI copolyesters) with both biocompatibility and sustainability were synthesized by using commercially available biobased diols and diacids. Due to the presence of itaconate in copolyesters, it can be readily crosslinked by peroxide into a crystallizable network. The structure and thermal properties of PBISI copolyesters were determined by ¹H NMR, FTIR, DSC, and WAXD. The chain composition, melting point and crystallinity of the PBISI copolyesters can be tuned continuously by changing the content of isosorbide. The crosslinked copolyester is demonstrated to be a promising shape memory polymer (SMP) with excellent shape memory properties including shape fixity and shape recovery rate close to 100%. The switching temperatures of PBISI-based SMPs can be tuned between 26 °C and 54 °C by altering the composition of PBISI copolyesters and curing extent. Cell adhesion and proliferation were adopted to evaluate the potential biocompatibility of PBISI-based SMPs, and the results indicated that all the PBISI-based SMPs were essentially noncytotoxic, making them suitable for fabricating biomedical devices.

Synthesis, properties and applications of biodegradable polymers derived from diols and dicarboxylic acids: from polyesters to poly(ester amide)s

Poly(alkylene dicarboxylate)s constitute a family of biodegradable polymers with increasing interest for both commodity and speciality applications. Most of these polymers can be prepared from biobased diols and dicarboxylic acids such as 1,4-butanediol, succinic acid and carbohydrates. This review provides a current status report concerning synthesis, biodegradation and applications of a series of polymers that cover a wide range of properties, namely, materials from elastomeric to rigid characteristics that are suitable for applications such as hydrogels, soft tissue engineering, drug delivery systems and liquid crystals. Finally, the incorporation of aromatic units and α-amino acids is considered since stiffness of molecular chains and intermolecular interactions can be drastically changed. In fact, poly(ester amide)s derived from naturally occurring amino acids offer great possibilities as biodegradable materials for biomedical applications which are also extensively discussed.

Isohexide hydroxy esters: synthesis and application of a new class of biobased AB-type building blocks

Here we present the synthesis of a new family of sugar derived 1,4:3,6-dianhydrohexitol based AB-type monomers, containing one methyl ester group and a secondary hydroxyl group in all four possible stereo isomers (RR, RS, SR, SS).