Photopolymerization of Cationic Monomers and Acrylate/Divinylether Blends under Visible Light Using Pyrromethene Dyes

Thioxanthone-Based Siloxane Photosensitizer for Cationic/Radical Photopolymerization and Photoinduced Sol-Gel Reactions

In this investigation, a multifunctional visible-light TX-based photosensitizer containing a siloxane moiety (TXS) was designed with a good overall yield of 54%. The addition of a siloxane moiety enabled the incorporation of a TX photosensitizer into a siloxane network by photoinduced sol-gel chemistry, thus avoiding its release. Both liquid 1H and solid-state 29Si NMR measurements undeniably confirmed the formation of photoacids resulting from the photolysis of the TXS/electron acceptor molecule (Iodonium salt), which promoted the photoinduced hydrolysis/condensation of the trimethoxysilane groups of TXS, with a high degree of condensation of its inorganic network. Notably, the laser flash photolysis, fluorescence, and electron paramagnetic resonance spin-trapping (EPR ST) experiments demonstrated that TXS could react with Iod through an electron transfer reaction through its excited states, leading to the formation of radical initiating species. Interestingly, the TXS/Iod was demonstrated to be an efficient photoinitiating system for free-radical (FRP) and cationic (CP) polymerization under LEDs@385, 405, and 455 nm. In particular, whatever the epoxy monomer mixtures used, remarkable final epoxy conversions were achieved up to 100% under air. In this latter case, we demonstrated that both the photoinduced sol-gel process (hydrolysis of trimethoxysilane groups) and the cationic photopolymerization occurred simultaneously.

Recent Advances in Monocomponent Visible Light Photoinitiating Systems Based on Sulfonium Salts

During the last decades, multicomponent photoinitiating systems have been the focus of intense research efforts, especially for the design of visible light photoinitiating systems. Although highly reactive three-component and even four-component photoinitiating systems have been designed, the complexity to elaborate such mixtures has incited researchers to design monocomponent Type II photoinitiators. Using this approach, the photosensitizer and the radical/cation generator can be combined within a unique molecule, greatly simplifying the elaboration of the photocurable resins. In this field, sulfonium salts are remarkable photoinitiators but these structures lack absorption in the visible range. Over the years, various structural modifications have been carried out in order to redshift their absorptions in the visible region. In this work, an overview of the different sulfonium salts activable under visible light and reported to date is proposed.

Development of the first panchromatic BODIPY-based one-component iodonium salts for initiating the photopolymerization processes

Herein, new iodonium salts based on a 4,4-difluoro-1,3,5,7,8-pentamethyl-4-bora-3a,4a-diaza-s-indecene (B-1) chromophore have been introduced to 3D printing applications.

Boron dipyrromethene (BODIPY) in polymer chemistry

The present review provides both a summary and outlook on the exciting field of BODIPYs in polymer chemistry.

Substituted 2-Phenacylbenzoxazole Difluoroboranes: Synthesis, Structure and Properties

Novel fluorescent dyes such as benzoxazole-boron complexes, bearing β-ketoiminate ligands, have been synthesized and characterized with a focus on the influence of a substituent on the basic photophysical properties. ¹H, ¹¹B, ¹³C, ¹⁵N, and ¹⁹F nuclear magnetic resonance (NMR) spectra of substituted 2-phenacylbenzoxazole difluoroboranes have been recorded and discussed. It is worth mentioning that a high correlation coefficient was found between ¹⁵N-NMR parameters and substituent constants. The photophysical properties of these new dyes have been investigated by fluorescence and ultraviolet-visible (UV-Vis) absorption spectroscopy. The geometry optimization, vibrational spectra, and the HOMO and LUMO energies were calculated based on density functional theory with the use of the B3LYP functional and 6-311++G(d,p) basis set.

Cationic Polymerization: From Photoinitiation to Photocontrol

During the last 40 years, researchers investigating photoinitiated cationic polymerizations have delivered tremendous success in both industrial and academic settings. A myriad of photoinitiating systems have been developed, thus allowing polymerization of a broad array of monomers (e.g., epoxides, vinyl ethers, alkenes, cyclic ethers, and lactones) under practical, inexpensive, and environmentally benign conditions. More recently, owing to progress in photoredox catalysis, photocontrolled cationic polymerization has emerged as a means to precisely regulate polymer chain growth. This Minireview provides a concise historical perspective on cationic polymerization induced by light and discusses the latest advances in both photoinitiated and photocontrolled processes. The latter are exciting new directions for the field that will likely impact industries ranging from micropatterning to the synthesis of complex biomaterials and sequence-controlled polymers.

Conjugated phenothiazine oxime esters as free radical photoinitiators

Three novel phenothiazine-substituted oxime esters (Ph-PTZ-OXE, TPA-PTZ-OXE and CZ-PTZ-OXE) applicable to visible laser diodes (405 nm and 455 nm) were successfully designed and synthesised.

Carbazole-based compounds containing aldehyde and cyanoacetic acid: optical properties and applications in photopolymerization

Carbazole-based aldehyde and cyanoacetic acid containing dyes were synthesized and applied as photosensitizers in photopolymerization with a LED light source at 455 nm.

Thiophene-substituted phenothiazine-based photosensitisers for radical and cationic photopolymerization reactions under visible laser beams (405 and 455 nm)

In the present work, we designed and prepared six new thiophene-substituted phenothiazine-based visible photosensitizers (ThPTZs) to solve the low absorptivity of phenothiazine in the visible light region.

Boron chemistry in a new light

Photocatalysis has recently opened up new avenues for the generation of radical species under visible light irradiation conditions. A particularly fascinating class of photocatalyzed transformations relies on the activation of stable boron species with visible-light since it allows the creation of boryl and/or carbon radicals through single electron transfer or energy transfer without the need for specific and costly equipment. This new paradigm has found numerous applications in synthetic organic chemistry, catalysis, and macromolecular chemistry. In this minireview, the concepts underlying photoactivation of boron-species as well as applications to the creation of C-H, C-C, C-O, B-C and B-S bond are discussed.

Recent Developments of Versatile Photoinitiating Systems for Cationic Ring Opening Polymerization Operating at Any Wavelengths and under Low Light Intensity Sources

Photoinitiators (PI) or photoinitiating systems (PIS) usable in light induced cationic polymerization (CP) and free radical promoted cationic polymerization (FRPCP) reactions (more specifically for cationic ring opening polymerization (ROP)) together with the involved mechanisms are briefly reviewed. The recent developments of novel two- and three-component PISs for CP and FRPCP upon exposure to low intensity blue to red lights is emphasized in details. Examples of such reactions under various experimental conditions are provided.

A dinuclear gold(i) complex as a novel photoredox catalyst for light-induced atom transfer radical polymerization

The highly active photocatalyst [Au₂(dppm)₂]Cl₂ is able to efficiently promote controlled/living photoATRP of acrylates and methacrylates.

Photochemistry and radical chemistry under low intensity visible light sources: application to photopolymerization reactions

The search for radical initiators able to work under soft conditions is a great challenge, driven by the fact that the use of safe and cheap light sources is very attractive. In the present paper, a review of some recently reported photoinitiating systems for polymerization under soft conditions is provided. Different approaches based on multi-component systems (e.g., photoredox catalysis) or light harvesting photoinitiators are described and discussed. The chemical mechanisms associated with the production of free radicals usable as initiating species or mediators of cations are reported.

Panchromatic Photopolymerizable Cationic Films Using Indoline and Squaraine Dye Based Photoinitiating Systems

The photoinitiating abilities of indoline and squaraine dyes (D102 and SQ02) incorporated in multicomponent systems for the cationic polymerization of an epoxide or a vinyl ether have been investigated. The polymerizable films exhibit a panchromatic character as revealed by their photosensitivity to a halogen lamp (370-800 nm); household LED bulbs centered at 462 nm (blue), 514 nm (green), 591 nm (yellow), and 630 nm (red); and laser diodes at 457, 473, 532, and 635 nm. SQ02 is particularly efficient in the 520-700 nm range, while D102 exhibits a good efficiency in the 400-580 nm region. The radical photopolymerization of an acrylate can also be observed particularly at 635 nm or upon a halogen lamp. The photochemical mechanisms are studied by steady state photolysis, fluorescence, cyclic voltammetry, electron spin resonance spin trapping, and laser flash photolysis techniques.

A multicolor photoinitiator for cationic polymerization and interpenetrated polymer network synthesis: 2,7-di-tert-butyldimethyldihydropyrene

For polymer synthesis upon visible light, actual photoinitiator operates in a restricted part of the spectrum. As a consequence, several photoinitiators are necessary to harvest all of the emitted visible photons. Herein, 2,7-di-tert-butyldimethyldihydropyrene is used for the first time as a multicolor photoinitiator for the cationic polymerization of epoxides. Upon addition of diphenyliodonium hexafluorophosphate and optionally N-vinylcarbazole, the originality of this approach is to allow efficient monomer conversions under various excitation light sources in the 360-650 nm wavelength range: halogen lamps, and light-emitting and laser diodes. The synthesis of an interpenetrated polymer network from an epoxide/acrylate blend using a red light at 635 nm is also feasible. The formed polymer material exhibits a photochromic character.

New core-pyrene π structure organophotocatalysts usable as highly efficient photoinitiators

Eleven di- and trifunctional compounds based on a core-pyrene π structure (Co_Py) were synthesized and investigated for the formation of free radicals. The application of two- and three-component photoinitiating systems (different Co_Pys with the addition of iodonium or sulfonium salts, alkyl halide or amine) was investigated in detail for cationic and radical photopolymerization reactions under near-UV-vis light. The proposed compounds can behave as new photocatalysts. Successful results in terms of rates of polymerization and final conversions were obtained. The strong MO coupling between the six different cores and the pyrene moiety was studied by DFT calculations. The different chemical intermediates are characterized by ESR and laser flash photolysis experiments. The mechanisms involved in the initiation step are discussed, and relationships between the core structure, the Co_Py absorption property, and the polymerization ability are tentatively proposed.