pH-Sensitive Block Copolymer Vesicles with Variable Trigger Points for Drug Delivery

Polymersomes in Drug Delivery─From Experiment to Computational Modeling

Polymersomes, composed of amphiphilic block copolymers, are self-assembled vesicles that have gained attention as potential drug delivery systems due to their good biocompatibility, stability, and versatility. Various experimental techniques have been employed to characterize the self-assembly behaviors and properties of polymersomes. However, they have limitations in revealing molecular details and underlying mechanisms. Computational modeling techniques have emerged as powerful tools to complement experimental studies and enabled researchers to examine drug delivery mechanisms at molecular resolution. This review aims to provide a comprehensive overview of the state of the art in the field of polymersome-based drug delivery systems, with an emphasis on insights gained from both experimental and computational studies. Specifically, we focus on polymersome morphologies, self-assembly kinetics, fusion and fission, behaviors in flow, as well as drug encapsulation and release mechanisms. Furthermore, we also identify existing challenges and limitations in this rapidly evolving field and suggest possible directions for future research.

Construction of Core-Cross-Linked Polymer Micelles with High Biocompatibility and Stability for pH/Reduction Controllable Drug Delivery

Polymer micelles have been studied extensively in drug delivery systems (DDS), and their stability is well known to directly affect drug delivery. In this article, a series of amphiphilic copolymers LA-PDPAn-PVPm were synthesized to prepare core-cross-linked nanoparticles (CNP) applied to controllable and targeted anticancer drug delivery. The copolymers could self-assemble in aqueous solution and form homogeneous spherical micelles with particle sizes of between 100 and 150 nm. A comparison between un-cross-linked UCNP and CNP showed that the cross-linking of LA could significantly improve the stability and responsive ability of the nanoparticles. From the in vitro-simulated drug release experiments, CNP was found to have great drug blocking ability under normal physiological conditions and could achieve rapid and efficient drug release under acidic/reducing conditions. In addition, cell experiments showed that CNP had superior biocompatibility and could target tumor cells for drug release. In conclusion, a drug carrier based on copolymer LA-PDPA-PVP realized effective controlled drug release due to the cross-linking of LA. The results will provide guidance for the design strategy of polymer micelles for drug carriers.

Recent strategies to develop pH-sensitive injectable hydrogels

"Smart" biomaterials that are responsive to pathological abnormalities are an appealing class of therapeutic platforms for the development of personalized medications. The development of such therapeutic platforms requires novel techniques that could precisely deliver therapeutic agents to the diseased tissues, resulting in enhanced therapeutic effects without harming normal tissues. Among various therapeutic platforms, injectable pH-responsive biomaterials are promising biomaterials that respond to the change in environmental pH. Aqueous solutions of injectable pH-responsive biomaterials exhibit a phase transition from sol-to-gel in response to environmental pH changes. The injectable pH-responsive hydrogel depot can provide spatially and temporally controlled release of various bioactive agents including chemotherapeutic drugs, peptides, and proteins. Therapeutic agents are imbibed into hydrogels by simple mixing without the use of toxic solvents and used for long-term storage or in situ injection using a syringe or catheter that could form a stable gel and acts as a controlled release depot in a minimally invasive manner. Tunable physicochemical properties of the hydrogels, such as biodegradability, ability to interact with drugs and mechanical properties, can control the release of the therapeutic agent. This review highlights the advances in the design and development of biodegradable and in situ forming injectable pH-responsive biomaterials that respond to the physiological conditions. Special attention has been paid to the development of amphoteric pH-responsive biomaterials and their utilization in biomedical applications. We also highlight key challenges and future directions of pH-responsive biomaterials in clinical translation.

pH-responsive nanoparticles based on POEOMA-b-PDPA block copolymers for RNA encapsulation, protection and cell delivery

The use of gene-based products, such as DNA or RNA, is increasingly being explored for various innovative therapies. However, the success of these strategies is highly dependent on the effective delivery of these biomolecules to target cells. Therefore, the development of pH-responsive nanoparticles comprises the creation of intelligent delivery systems with high therapeutic efficiency. In this work, the pH-responsiveness of the poly(2-(diisopropylamino)ethyl methacrylate)) (PDPA) block was investigated for the encapsulation and delivery of small RNAs (sRNA) to cancer cells. The pH responsiveness was dependent on the protonation profile of the tertiary amines of PDPA, which directly affected the electrostatic interactions established with RNA. Thus, block copolymers based on poly(oligo(ethylene oxide) methyl ether methacrylate) (POEOMA) and PDPA, POEOMA-b-PDPA, were synthesized by supplemental activator and reducing agent atom transfer radical polymerization (SARA ATRP). The structure of the block copolymers was characterized by size exclusion chromatography and ¹H NMR spectroscopy. The copolymers allowed effective complexation of model sRNAs and a pre-miRNA with efficiencies of about 89 % and 91 %, respectively. The characterization by dynamic light scattering revealed that these systems had sizes between 76 and 1375 nm. It was also found that the morphology of the polyplexes depended on the pH, since the preparation at a pH lower than the pKa of the copolymers resulted in spherical but polydisperse particles, while higher pH values resulted in nanoparticles with more homogeneous size, but altered morphology. Moreover, due to pH-responsiveness, it was achieved the release of RNA at pH higher than the pKa of the copolymers, while maintaining its integrity. The polyplexes also showed a high potential to protect RNA from RNases. The transfection of a lung cancer model (A549) and fibroblast cell lines showed that these polyplexes did not cause cell toxicity. In addition, the polyplexes enabled the effective transfection of the A549 cell line with pre-miRNA-29b and miRNA-29b, resulting in a decrease of expression levels of the target DNMT3B gene by approximately 51 % and 47 %, respectively. Overall, the POEOMA-b-PDPA copolymers proved to be a promising strategy for developing responsive delivery systems, that can play a critical role in some diseases, such as cancer, where pH varies between the intra and extracellular environments.

Modeling Polyzwitterion-Based Drug Delivery Platforms: A Perspective of the Current State-of-the-Art and Beyond

Drug delivery platforms are anticipated to have biocompatible and bioinert surfaces. PEGylation of drug carriers is the most approved method since it improves water solubility and colloid stability and decreases the drug vehicles’ interactions with blood components. Although this approach extends their biocompatibility, biorecognition mechanisms prevent them from biodistribution and thus efficient drug transfer. Recent studies have shown (poly)zwitterions to be alternatives for PEG with superior biocompatibility. (Poly)zwitterions are super hydrophilic, mainly stimuli-responsive, easy to functionalize and they display an extremely low protein adsorption and long biodistribution time. These unique characteristics make them already promising candidates as drug delivery carriers. Furthermore, since they have highly dense charged groups with opposite signs, (poly)zwitterions are intensely hydrated under physiological conditions. This exceptional hydration potential makes them ideal for the design of therapeutic vehicles with antifouling capability, i.e., preventing undesired sorption of biologics from the human body in the drug delivery vehicle. Therefore, (poly)zwitterionic materials have been broadly applied in stimuli-responsive “intelligent” drug delivery systems as well as tumor-targeting carriers because of their excellent biocompatibility, low cytotoxicity, insignificant immunogenicity, high stability, and long circulation time. To tailor (poly)zwitterionic drug vehicles, an interpretation of the structural and stimuli-responsive behavior of this type of polymer is essential. To this end, a direct study of molecular-level interactions, orientations, configurations, and physicochemical properties of (poly)zwitterions is required, which can be achieved via molecular modeling, which has become an influential tool for discovering new materials and understanding diverse material phenomena. As the essential bridge between science and engineering, molecular simulations enable the fundamental understanding of the encapsulation and release behavior of intelligent drug-loaded (poly)zwitterion nanoparticles and can help us to systematically design their next generations. When combined with experiments, modeling can make quantitative predictions. This perspective article aims to illustrate key recent developments in (poly)zwitterion-based drug delivery systems. We summarize how to use predictive multiscale molecular modeling techniques to successfully boost the development of intelligent multifunctional (poly)zwitterions-based systems.

Intelligent design of polymersomes for antibacterial and anticancer applications

Polymersomes (or polymer vesicles) have attracted much attention for biomedical applications in recent years because their lumen can be used for drug delivery and their coronas and membrane can be modified with a variety of functional groups. Thus, polymersomes are very suitable for improved antibacterial and anticancer therapy. This review mainly highlighted recent advances in the synthetic protocols and design principles of intelligent antibacterial and anticancer polymersomes. Antibacterial polymersomes are divided into three categories: polymersomes as antibiotic nanocarriers, intrinsically antibacterial polymersomes, and antibacterial polymersomes with supplementary means including photothermal and photodynamic therapy. Similarly, the anticancer polymersomes are divided into two categories: polymersomes-based delivery systems and anticancer polymersomes with supplementary means. In addition, the bilateral relationship between bacteria and cancer is addressed, since more and more evidences show that bacteria may cause cancer or promote cancer progression. Finally, prospective on next-generation antibacterial and anticancer polymersomes are discussed. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease Biology-Inspired Nanomaterials > Lipid-Based Structures.

Phase Separation of Aqueous Poly(diisopropylaminoethyl methacrylate) upon Heating

Poly(diisopropylaminoethyl methacrylate) (PDPA) is a pH- and thermally responsive water-soluble polymer. This study deepens the understanding of its phase separation behavior upon heating. Phase separation upon heating was investigated in salt solutions of varying pH and ionic strength. The effect of the counterion on the phase transition upon heating is clearly demonstrated for chloride-, phosphate-, and citrate-anions. Phase separation did not occur in pure water. The buffer solutions exhibited similar cloud points, but phase separation occurred in different pH ranges and with different mechanisms. The solution behavior of a block copolymer comprising poly(dimethylaminoethyl methacrylate) (PDMAEMA) and PDPA was investigated. Since the PDMAEMA and PDPA blocks phase separate within different pH- and temperature ranges, the block copolymer forms micelle-like structures at high temperature or pH.

Silica nanoparticle-loaded thermoresponsive block copolymer vesicles: a new post-polymerization encapsulation strategy and thermally triggered release

A thermoresponsive amphiphilic diblock copolymer that can form spheres, worms or vesicles in aqueous media at neutral pH by simply raising the dispersion temperature from 1 °C (spheres) to 25 °C (worms) to 50 °C (vesicles) is prepared via polymerization-induced self-assembly (PISA). Heating such an aqueous copolymer dispersion from 1 °C up to 50 °C in the presence of 19 nm glycerol-functionalized silica nanoparticles enables this remarkable ‘shape-shifting’ behavior to be exploited as a new post-polymerization encapsulation strategy. The silica-loaded vesicles formed at 50 °C are then crosslinked using a disulfide-based dihydrazide reagent. Such covalent stabilization enables the dispersion to be cooled to room temperature without loss of the vesicle morphology, thus aiding characterization and enabling the loading efficiency to be determined as a function of both copolymer and silica concentration. Small-angle X-ray scattering (SAXS) analysis indicated a mean vesicle membrane thickness of approximately 20 ± 2 nm for the linear vesicles and TEM studies confirmed encapsulation of the silica nanoparticles within these nano-objects. After removal of the non-encapsulated silica nanoparticles via multiple centrifugation–redispersion cycles, thermogravimetric analysis indicated that vesicle loading efficiencies of up to 86% can be achieved under optimized conditions. Thermally-triggered release of the silica nanoparticles is achieved by cleaving the disulfide bonds at 50 °C using tris(2-carboxyethyl)phosphine (TCEP), followed by cooling to 20 °C to induce vesicle dissociation. SAXS is also used to confirm the release of silica nanoparticles by monitoring the disappearance of the structure factor peak arising from silica–silica interactions.

A loading efficiency of up to 86% is achieved for silica nanoparticles encapsulated within crosslinkable redox-sensitive thermoresponsive diblock copolymer vesicles in water at 50 °C; triggered release is also demonstrated for this system.

Light-Enabled Reversible Shape Transformation of Block Copolymer Particles

Confined self-assembly of block copolymers (BCPs) is effective to manipulate various shapes of particles. In emulsion confined self-assembly, reversibly light-trigged switchable BCP particles are extremely expected, yet rarely reported. Herein, a novel strategy is developed to realize reversibly light-responsive shape-transformation of BCP particles by constructing functional surfactants with light-active azobenzene (azo) groups in the confined self-assembly of BCPs within emulsion droplet. Ultraviolet and visible lights can reversibly modulate the amphiphilicity and interfacial affinity of the surfactants to different blocks, triggering the reversible microphase structure transformation of BCP particles with high temporal-spatial resolution. We can realize shape and morphological transitions of BCP particles from onion-shaped spherical particles to striped ellipsoids and, ultimately, to inverse onion-like particles by ultraviolet irradiation. More importantly, this shape transformation is reversible by the irradiation of visible light, attributed to the reversible trans-cis isomerization of azo groups. We also demonstrate that the light-triggered shape transformation of BCP particles can be employed in a controllable drug release through a noncontacted and programmed manner, showing promising potential in clinic and biomedicine.

Block copolymer [(L-GluA-5-BE)-b-(L-AspA-4-BE)]-based nanoflower capsules with thermosensitive morphology and pH-responsive drug release for cancer therapy

Herein, the synthesis of an amino-acid-based di-block copolymer (di-BCP) in-between an l-glutamic acid-5-benzyl ester and l-aspartic acid-4-benzyl ester [(l-GluA-5-BE)-b-(l-AspA-4-BE)] has been reported. However, the synthesis of di-BCP of [(l-GluA-5-BE)-b-(l-AspA-4-BE)] was carried out through the facile modified ring-opening polymerization (ROP) without using any surfactants and harmful chemicals. Interestingly, the synthesized [(l-GluA-5-BE)-b-(l-AspA-4-BE)] has been used to design nanoflower capsules (NFCs) with surface-functionalized nanoflakes and petals. Notably, the simple solvent propanol has been used as a dispersing medium for the di-BCP-based powder to observe morphology of NFCs. Moreover, these amino-acid-based NFCs are biocompatible, biodegradable, and bio-safe for mankind usage. Consequently, di-BCP-based NFCs show changes in morphology with different temperature conditions, i.e., at ∼10 °C, ∼25 °C (RT), and ∼37 °C (body temperature). Furthermore, the average thickness of the surface-functionalized nanopetals has been calculated as ∼324 nm (in diameter). Similarly, the average distance between petals is calculated as 3.6 μm and the pore depth is ∼21 nm. Additionally, the porosity throughout the surface of capsules in-between nanopetals is an advantageous characteristic feature to improve the drug/paclitaxel (PTX) loading capacity. It is a unique and novel approach to design NFCs, which are a potential payload for nanomedicine and cancer therapy. Furthermore, NFCs were used to evaluate the loading efficacy of drugs and showed ∼78% (wt/wt%) of the PTX loading. Moreover, NFCs showed ∼74% drug release at physiological body temperature. Thus, NFCs showed remarkable release at acidic pH medium. However, PTX released from NFCs showed greater cell inhibition (i.e., ∼79%) with an increase of the PTX concentration after 24 h incubation over HeLa (human epithelial cervical cancer) cells. Besides, PTX released from NFC showed significant (∼34%) cell killing capacity. Such promising NFCs are recommended for breast, liver, and lung cancer therapeutics.

Enthalpic incompatibility between two steric stabilizer blocks provides control over the vesicle size distribution during polymerization-induced self-assembly in aqueous media

Over the past two decades, block copolymer vesicles have been widely used by many research groups to encapsulate small molecule drugs, genetic material, nanoparticles or enzymes. They have also been used to design examples of autonomous self-propelled nanoparticles. Traditionally, such vesicles are prepared via post-polymerization processing using a water-miscible co-solvent such as DMF or THF. However, such protocols are invariably conducted in dilute solution, which is a significant disadvantage. In addition, the vesicle size distribution is often quite broad, whereas aqueous dispersions of relatively small vesicles with narrow size distributions are highly desirable for potential biomedical applications. Alternatively, concentrated dispersions of block copolymer vesicles can be directly prepared via polymerization-induced self-assembly (PISA). Moreover, using a binary mixture of a relatively long and a relatively short steric stabilizer block enables the convenient PISA synthesis of relatively small vesicles with reasonably narrow size distributions in alcoholic media (C. Gonzato et al., JACS, 2014, 136, 11100-11106). Unfortunately, this approach has not yet been demonstrated for aqueous media, which would be much more attractive for commercial applications. Herein we show that this important technical objective can be achieved by judicious use of two chemically distinct, enthalpically incompatible steric stabilizer blocks, which ensures the desired microphase separation across the vesicle membrane. This leads to the formation of well-defined vesicles of around 200 nm diameter (size polydispersity = 13-16%) in aqueous media at 10% w/w solids as judged by transmission electron microscopy, dynamic light scattering and small-angle X-ray scattering.

Temperature Variation Enables the Design of Biobased Block Copolymers via One-Step Anionic Copolymerization

A one-pot approach for the preparation of diblock copolymers consisting of polystyrene and polymyrcene blocks is described via a temperature-induced block copolymer (BCP) formation strategy. A monomer mixture of styrene and myrcene is employed. The unreactive nature of myrcene in a polar solvent (tetrahydrofuran) at -78 °C enables the sole formation of active polystyrene macroinitiators, while an increase of the temperature (-38 °C to room temperature) leads to poly(styrene-block-myrcene) formation due to polymerization of myrcene. Well-defined BCPs featuring molar masses in the range of 44-117.2 kg mol^-1 with dispersities, Ð, of 1.09-1.21, and polymyrcene volume fractions of 30-64% are accessible. Matrix assisted laser desorption ionization-time of flight mass spectrometry measurements reveal the temperature-controlled polymyrcene block formation, while both transmission electron microscopy and small-angle X-ray scattering measurements prove the presence of clearly microphase-separated, long range-ordered domains in the block copolymers. The temperature-controlled one-pot anionic block copolymerization approach may be general for other terpene-diene monomers.

The responsive behaviors of bilayer membrane under uniaxial mechanical probe

In experiments, atomic force microscopy technology was used to measure the modulus of the membrane. However, these studies mainly focus on the linear responsive behavior. In the present work, a theoretical study is performed to show the nonlinear responsive behavior, which includes the stretching induced structural transitions. It demonstrates that the structural transition of the bilayer membrane takes place during the stretching process of the mechanical probe. A vertical cylindrical micelle can be obtained by stretching the membrane under deep compression conditions, and the cylindrical micelle can grow continuously along the axial direction. Moreover, under shallow compression conditions, the probe pulls a spherical micelle from the membrane, and then, the membrane returns to flatness. A comprehensive study is performed to show the mechanism of the responsive behaviors of the structural transition during the compression and stretching processes. When the probe acts on the B-rich layer, it is more likely to pull out a regular micelle. However, when the probe acts on the bottom A-rich layer, complex vesicles are more likely to be pulled out from the bilayer membrane. This study provides a comprehensive diagram of the mechanical responsive behavior of the membrane, which would be a guide for an experiment of biomembranes and the design of new self-assembled structures.

A general method to greatly enhance ultrasound-responsiveness for common polymeric assemblies

Ultrasound-controlled drug release is a very promising technique for controlled drug delivery due to the unique advantages of ultrasound as the stimulus.

Intratumoral fate of functional nanoparticles in response to microenvironment factor: Implications on cancer diagnosis and therapy

The extraordinary growth and progression of tumor require enormous nutrient and energy. Unregulated behaviors of cancer cell progressing and persistently change of tumor microenvironment (TME) which acts as the soil for cancer growth and metastasis are the ubiquitous features. The tumor microenvironment exhibits some unique features which differ with the normal tissues. While the nanoparticles get through the blood vessel leakage, they encounter immediately and interact directly with these microenvironment factors. These factors may inhibit the diffusion of nanoparticles from penetrating through the tumor, or induce the dissociation of nanoparticles. Different nanoparticles encountered with different intratumoral microenvironment factors end up in different way. Therefore, in this review, we first briefly introduced the formations, distributions, features of some intratumoral microenvironment, and their effects on the tumor progression. They include extracellular matrix (ECM), matrix metalloproteinases (MMPs), acidic/hypoxia environment, redox environment, and tumor associated macrophages (TAMs). We then exemplified how these factors interact with nanoparticles and emphasized the potentials and challenges of nanoparticle-based strategies facing in enhancing intratumoral penetration and tumor microenvironment remodeling. We hope to give a simple understanding of the interaction between these microenvironment factors and the nanoparticles, thus, favors the designing and constructing of more ideal functional nanoparticles.

Spatiotemporal control over the host–guest characteristics of a stimulus-triggerable trifunctional polymer assembly

The positional effect of stimuli-responsive units in tri-component copolymer vesicles is studied to explore variations in the host–guest properties of the assembly.

Star-Graft Quarterpolymer-Based Polymersomes as Nanocarriers for Co-Delivery of Hydrophilic/Hydrophobic Chemotherapeutic Agents

We report the fabrication of polymersomes, using as building blocks star-graft quarterpolymers, composed of hydrophobic polystyrene and pH-sensitive poly(2-vinylpyridine)-b-poly(acrylic acid) (P2VP-b-PAA) arms, emanated from a common nodule, enriched by thermosensitive poly(N-isopropylacrylamide) grafts covalently bonded on the PAA block-arms. These multicompartmental polymersomes were evaluated as nanocarriers for the encapsulation and controlled co-delivery of doxorubicin (hydrophilic) and paclitaxel (hydrophobic) chemotherapeutic agents. The polymersomes can load these drugs in different compartments and can efficiently be internalized in the human lung adenocarcinoma epithelial cells, delivering their cargo and inducing high cell apoptosis. The release kinetics of both anticancer agents was controlled differently by the environmental conditions (pH and temperature). Enhanced release was observed at the acidic pH 6.0 and under physiological temperature (37 °C). At the same total drug level, co-delivery of these drugs with the polymersomes caused enhanced cytotoxicity and induced significantly higher cell apoptosis in the cancer cell line compared to the polymersomes loaded with either of the two drugs.

Preparation of well-defined brush-like block copolymers for gene delivery applications under biorelevant reaction conditions

Well-defined oligo(ethylene glycol) methyl ether methacrylate (OEOMA) based block copolymers with cationic segments composed by N,N-(dimethylamino) ethyl methacrylate (DMAEMA) and/or 2-(diisopropylamino) ethyl methacrylate (DPA) were developed under biorelevant reaction conditions. These brush-type copolymers were synthesized through supplemental activator and reducing agent (SARA) atom transfer radical polymerization (ATRP) using sodium dithionite as SARA agent. The synthesis was carried out using an eco-friendly solvent mixture, very low copper catalyst concentration, and mild reaction conditions. The structure of the block copolymers was characterized by size exclusion chromatography (SEC) analysis and ¹H nuclear magnetic resonance (NMR) spectroscopy. The pH-dependent protonation of these copolymers enables the efficient complexation with plasmid DNA (pDNA), yielding polyplexes with sizes ranging from 200 up to 700 nm, depending on the molecular weight of the copolymers, composition and concentration used. Agarose gel electrophoresis confirmed the successful pDNA encapsulation. No cytotoxicity effect was observed, even for N/P ratios higher than 50, for human fibroblasts and cervical cancer cell lines cells. The in vitro cellular uptake experiments demonstrated that the pDNA-loaded block copolymers were efficiently delivered into nucleus of cervical cancer cells. The polymerization approach, the unique structure of the block copolymers and the efficient DNA encapsulation presented can open new avenues for development of efficient tailor made gene delivery systems under biorelevant conditions.

Polymer Vesicles: Modular Platforms for Cancer Theranostics

As an emerging field that is receiving an increasing amount of interest, theranostics is becoming increasingly important in the field of nanomedicine. Among the various smart platforms that have been proposed for use in theranostics, polymer vesicles (or polymersomes) are among the most promising candidates for integration of designated functionalities and modalities. Here, a brief summary of typical theranostic platforms is presented with a focus on modular polymer vesicles. To highlight modularity, the different methodologies for designing therapeutic and diagnostic modules are classified and current examples of theranostic vesicles that excel in both performance and design principle are provided. Finally, future prospects for theranostic polymer vesicles that can be readily prepared with functional modules are proposed. Overall, theranostic polymer vesicles with modular modalities and functions are more promising in nanomedicine than simply being "over-engineered".

An Innovative Approach to Control Steel Reinforcement Corrosion by Self-Healing

The corrosion of reinforced steel, and subsequent reinforced concrete degradation, is a major concern for infrastructure durability. New materials with specific, tailor-made properties or the establishment of optimum construction regimes are among the many approaches to improving civil structure performance. Ideally, novel materials would carry self-repairing or self-healing capacities, triggered in the event of detrimental influence and/or damage. Controlling or altering a material's behavior at the nano-level would result in traditional materials with radically enhanced properties. Nevertheless, nanotechnology applications are still rare in construction, and would break new ground in engineering practice. An approach to controlling the corrosion-related degradation of reinforced concrete was designed as a synergetic action of electrochemistry, cement chemistry and nanotechnology. This contribution presents the concept of the approach, namely to simultaneously achieve steel corrosion resistance and improved bulk matrix properties. The technical background and challenges for the application of polymeric nanomaterials in the field are briefly outlined in view of this concept, which has the added value of self-healing. The credibility of the approach is discussed with reference to previously reported outcomes, and is illustrated via the results of the steel electrochemical responses and microscopic evaluations of the discussed materials.

Metallopolymer-Based Block Copolymers for the Preparation of Porous and Redox-Responsive Materials

Metallopolymers are a unique class of functional materials because of their redox-mediated optoelectronic and catalytic switching capabilities and, as recently shown, their outstanding structure formation and separation capabilities. Within the present study, (tri)block copolymers of poly(isoprene) (PI) and poly(ferrocenylmethyl methacrylate) having different block compositions and overall molar masses up to 328 kg mol^-1 are synthesized by anionic polymerization. The composition and thermal properties of the metallopolymers are investigated by state-of-the-art polymer analytical methods comprising size exclusion chromatography, ¹H NMR spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. As a focus of this work, excellent microphase separation of the synthesized (tri)block copolymers is proven by transmission electron microscopy, scanning electron microcopy, energy-dispersive X-ray spectroscopy, small-angle X-ray scattering measurements showing spherical, cylindrical, and lamellae morphologies. As a highlight, the PI domains are subjected to ozonolysis for selective domain removal while maintaining the block copolymer morphology. In addition, the novel metalloblock copolymers can undergo microphase separation on cellulose-based substrates, again preserving the domain order after ozonolysis. The resulting nanoporous structures reveal an intriguing switching capability after oxidation, which is of interest for controlling the size and polarity of the nanoporous architecture.

Dual-Responsive Self-Propulsion Smart Device Steadily Driven by CO2 and H2O2

In this paper, we introduce a kind of tertiary amine-based CO₂-responsive material combining with the H₂O₂-responsive material to develop a dual-responsive self-propulsion smart device which can convert the chemical energy of H₂O₂ into mechanical energy steadily through diving-surfacing cycles. In this dual-responsive device, the CO₂-responsive material is designed as a wettability conversion species, which is wrapped with a strip of platinum to catalyze the decomposition of H₂O₂ to generate gaseous O₂ to realize surfacing. In deionized water, the device floats on the surface of the water initially and can perform a diving-surfacing cycle when CO₂ and H₂O₂ stimuli are alternately applied to the aqueous solution. The cyclic movement of the device can be realized by the generation and release of the inner gas through the hydrophobic cover, leading to a new controllable transition of different kinds of energy.

The secondary structures of PEG-functionalized random copolymers derived from (R)- and (S)- families of alkyne polycarbodiimides

Macromolecular micelles: a hydrophobic polyamidine backbone surrounded by hydrophilic PEG chains.

In situ synthesis of diblock copolymer nano-assemblies via dispersion RAFT polymerization induced self-assembly and Ag/copolymer composite nanoparticles thereof

Lacunal nanospheres were obtained through the dispersion of styrene in an ethanol/water mixture mediated by PAA-CTA, while pure vesicles were obtained for PAA-b-P(AA-r-St) block assemblies under similar conditions.

Inhomogeneous-collapse driven micelle-vesicle transition of amphiphilic block copolymers

Understanding the morphological transition dynamics related to the hydrophilic-hydrophobic interface has been a challenge due to the lack of an effective evaluation method. Herein, nuclear magnetic resonance spectroscopy was employed to study the morphological transition related chain collapse of poly(N,N'-diethylaminoethylmethacrylate)-b-poly(N-isopropylacrylamide) (PDEAEMA₁₃₃-b-PNIPA₃₂₂) and poly(N,N'-dimethylaminoethylmethacrylate)-b-poly(N-isopropylacrylamide) (PDMAEMA₉₅-b-PNIPA₂₂₈) and was proved to be a powerful technique in morphological transition mechanism studies once combined with dynamic light scattering and transmission electron microscopy. Unlike the cooperative coil collapse of two blocks in the PDMAEMA₉₅-b-PNIPA₂₂₈ alkaline solution upon heating which induces the assembly of a nanostructure (∼200 nm) with a hydrophobic core containing both collapsed PDMAEMA and PNIPA segments and a hydrophilic surface part consisting of un-shrunk PDMAEMA and PNIPA segments, PDEAEMA₁₃₃-b-PNIPA₃₂₂ with a low-temperature core-shell micelle structure showed a micelle-vesicle transition due to temperature-induced inhomogeneous-collapse of PNIPA. The PNIPA segments in the shell sequentially collapse outside (starting at the core-shell interface), accompanied by a gradual decrease in micelle size. Above the critical temperature, the residual hydrophilic PNIPA segments become too short to stabilize the micelle structure, the micelles then transform into vesicles of a slightly larger size, instead of micelle aggregation and precipitation as normally expected.

CO2-Stimulated morphology transition of ABC miktoarm star terpolymer assemblies

CO₂-Regulated self-assembly of star terpolymers star-[poly(ethylene glycol)-polystyrene-poly[2-(N,N-diethylamino)ethyl methacrylate]] (μ-PEG-PS-PDEA) was studied and an unusual vesicle/microsphere-to-lamella transition upon CO₂ stimulation was observed.

Stimulus-responsive non-ionic diblock copolymers: protonation of a tertiary amine end-group induces vesicle-to-worm or vesicle-to-sphere transitions

Morpholine-functionalised poly(glycerol monomethacrylate)-poly(2-hydroxypropyl methacrylate) diblock copolymer vesicles are transformed into worms or spheres on lowering the solution pH.

Investigation on the self-assembled behaviors of C18unsaturated fatty acids in arginine aqueous solution

Self-assembled behaviors of UFAs in arginine solution have provided a theoretical basis for the application of two functional molecules in drug delivery.

Self-assembly and disassembly of stimuli responsive tadpole-like single chain nanoparticles using a switchable hydrophilic/hydrophobic boronic acid cross-linker

pH/sugar responsive behaviour of tadpole-like single chain nanoparticles based on a switchable hydrophilic/hydrophobic boronic acid cross-linker is described.

Dual-pH-sensitivity and tumour targeting core–shell particles for intracellular drug delivery

The principal problem in the area of drug delivery is achieving better selectivity and controllability.