A Novel Benzo[1,2-b:4,5-b′]dithiophene-Based Conjugated Polymer with a Pendant Diketopyrrolopyrrole Unit for High-Performance Solar Cells

A New Ester-Substituted Quinoxaline-Based Narrow Bandgap Polymer Donor for Organic Solar Cells

The electron-deficient ester group substitution in the sidechain of the commonly used electron-withdrawing quinoxaline (Qx) unit is seldom studied, while ester-substituted Qx units possess easy syntheses and facile modulation of the polymer solubility, and the enhanced electron-withdrawing property of ester substituted Qx unit can theoretically broaden the optical absorption of the resulting polymers and improve the open circuit voltage in the corresponding organic solar cells (OSCs). In this work, a novel ester-substituted Qx-based narrow bandgap polymer (NBG) donor material PBDTT-EFQx, which exhibits an absorption edge of 790 nm (bandgap < 1.6 eV), is designed and synthesized. Results show that the OSCs composed of PBDTT-EFQx and PC₇₁ BM present the highest power conversion efficiency (PCE) of 6.8%, compared to PCEs of 5.0% for PBDTT-EFQx:ITIC based devices and 4.1% for PBDTT-EFQx:N2200 based devices, respectively. Characterizations and analyses indicate that the PC₇₁ BM-based OSCs have well-matched energy levels, better complementary light absorption, the highest and most balanced carrier mobilities, as well as the lowest degree of recombination losses, and therefore, leading to the highest PCE among the three types of OSCs. This work reveals that the ester-substituted quinoxaline unit is one of the potential building blocks for NBG polymer donors.

Recent developments in the synthesis of regioregular thiophene-based conjugated polymers for electronic and optoelectronic applications using nickel and palladium-based catalytic systems

Thiophene-based conjugated polymers are important conjugated polymers due to their exceptional optical and conductive properties, over the past few decades many researchers have designed novel strategies to reach more efficient materials for electronic applications.

Post-Treatment-Free Main Chain Donor and Side Chain Acceptor (D-s-A) Copolymer for Efficient Nonfullerene Solar Cells with a Small Voltage Loss

Main chain donor and side chain acceptor (D-s-A) copolymers are an important branch of the D-A copolymer family. However, the development of D-s-A copolymers significantly falls behind the alternative D-A copolymers, especially for organic solar cells, because a breakthrough in device performance is not yet obtained with a reported power conversion efficiency (PCE) of 2%-4%. Herein, a newly developed D-s-A copolymer PDRCNBDT, bearing 2-(1, 1-dicyanomethylene) rhodanine pendant group as the donor material, delivers a high PCE of 5.3% for nonfullerene solar cells. To the best of our knowledge, this is the best value reported for D-s-A copolymers to date. The improved PCE is observed to be associated with a very small energy loss (E_loss ) of 0.57 eV, accompanied by a high open-circuit voltage (V_oc ) of 1.015 eV. It is important to note that this efficient D-s-A copolymer is employed in organic solar cells (OSCs), free of additive and annealing treatments.

Synthesis and Characterization of Two-Dimensional Conjugated Polymers Incorporating Electron-Deficient Moieties for Application in Organic Photovoltaics

A series of novel p-type conjugated copolymers, PTTVBDT, PTTVBDT-TPD, and PTTVBDT-DPP, cooperating benzo[1,2-b:4,5-b′]dithiophene (BDT) and terthiophene-vinylene (TTV) units with/without thieno[3,4-c]pyrrole-4,6-dione (TPD) or pyrrolo[3,4-c]pyrrole-1,4-dione (DPP) via Stille polymerization were synthesized and characterized. Copolymer PTTVBDT shows a low-lying HOMO energy level and ordered molecular-packing behavior. Furthermore, two terpolymers, PTTVBDT-TPD and PTTVBDT-DPP, display stronger absorption ability, alower-lying HOMO energy level, and preferred molecular orientation, due to the replacement TTV-monomer units with electron-deficient groups. Furthermore, bulk-heterojunction organic solar cells were fabricated using blends of the PTTVBDT-TPD, and PC₆₁BM gave the best power conversion efficiency of 5.01% under the illumination of AM 1.5G, 100 mW·cm⁻²; the short circuit current (J_sc) was 11.65 mA·cm⁻² which displayed a 43.8% improvement in comparison with the PTTVBDT/PC₆₁BM device. These results demonstrate a valid strategy combining the two-dimensional molecular structure with random copolymerization strikes promising conjugated polymers to achieve highly efficient organic photovoltaics.

Modified structure of two-dimensional polythiophene derivatives by incorporating electron-deficient units into terthiophene-vinylene conjugated side chains and the polymer backbone: synthesis, optoelectronic and self-assembly properties, and photovoltaic application

Molecular engineering on the conjugated side chains of two-dimensional (2D) conjugated polymers was conducted and its effect on the optical, electronic, self-assembly and photovoltaic properties was investigated.

D–A–D–π–D–A–D type diketopyrrolopyrrole based small molecule electron donors for bulk heterojunction organic solar cells

Two organic small molecules based on diketopyrrolopyrrole (DPP) units having a D–A–D–π–D–A–D structure denoted as DPP-DPP and DPPTDPP were synthesized.

N. A, B. H. Rational design of benzodithiophene based conjugated polymers for better solar cell performance

We present a concise review of conjugated polymers based on benzodithiophenes (BDTs) for high-performance polymer solar cells (PSCs).

D–A conjugated polymers based on thieno[3,2-b]indole (TI) and 2,1,3-benzodiathiazole (BT) derivatives: synthesis, characterization and side-chain influence on photovoltaic properties

Thieno[3,2-b]indole (TI) derivatives were developed via Cadogan annulation for constructing D–A copolymers. Their performance in photovoltaic cells were finely tuned by side-chain engineering.

Small molecule based N-phenyl carbazole substituted diketopyrrolopyrroles as donors for solution-processed bulk heterojunction organic solar cells

We report two acetylene-bridged small molecules DPP5 and DPP6 with low HOMO–LUMO gaps as donors along with PC₇₁BM as an acceptor for the fabrication of solution-processed bulk heterojunction solar cells.