Poly(1,2-glycerol carbonate): A Fundamental Polymer Structure Synthesized from CO2 and Glycidyl Ethers

Construction of Polycarbonates with Pendant Multifunctional Groups via a One-Step CO2/ Diepoxide Copolymerization Approach

A "one-step" strategy has been demonstrated for the tunable synthesis of multifunctional aliphatic polycarbonates (APCs) with ethylene oxide (EO), ethylene carbonate (EC), and cyclohexene oxide (CHO) side groups by the copolymerization of 4-vinyl-1-cyclohexene diepoxide with carbon dioxide under an aminotriphenolate iron/PPNBz (PPN = bis(triphenylphosphine)-iminium, Bz = benzoate) binary catalyst. By adjusting the PPNBz-to-iron complex ratio and incorporating auxiliary solvents, the content of functional side groups can be tuned within the ranges of 53-75% for EO, 18-47% for EC, and <1-7% for CHO. The yield and molecular weight distribution of the resulting multifunctional APCs are affected by the viscosity of the polymerization system. The use of tetrahydrofuran as an auxiliary solvent enables the preparation of narrow-distribution polycarbonates at high conversion. This work presents a novel perspective for the preparation of tailorable multifunctional APCs.

Organic-Inorganic Hybrid Materials: Tailoring Carbon Dioxide-Based Polycarbonate with POSS-SH Crosslinking

A novel functional polycarbonate (PAGC), characterized by the presence of double bonds within its side chain, was successfully synthesized through a ternary copolymerization of propylene oxide (PO), allyl glycidyl ether (AGE), and carbon dioxide (CO2). Polyhedral oligomeric silsesquioxanes octamercaptopropyl (POSS-SH) was employed as a crosslinking agent, contributing to the formation of organic-inorganic hybrid materials. This incorporation was facilitated through thiol-ene click reactions, enabling effective interactions between the POSS molecules and the double bonds in the side chains of the polycarbonate. Scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) confirmed a homogeneous distribution of silicon (Si) and sulfur (S) in the polycarbonate matrix. The thiol-ene click reaction between POSS-SH and the polycarbonate led to a micro-crosslinked structure. This enhancement significantly increased the tensile strength of the polycarbonate to 42 MPa, a notable improvement over traditional poly (propylene carbonate) (PPC). Moreover, the cross-linked structure exhibited enhanced solvent resistance, expanding the potential applications of these polycarbonates in various plastic materials.

High dose, dual-release polymeric films for extended surgical bed paclitaxel delivery

While surgery represents a major therapy for most solid organ cancers, local recurrence is clinically problematic for cancers such as sarcoma for which adjuvant radiotherapy and systemic chemotherapy provide minimal local control or survival benefit and are dose-limited due to off-target side effects. We describe an implantable, biodegradable poly(1,2-glycerol carbonate) and poly(caprolactone) film with entrapped and covalently-bound paclitaxel enabling safe, controlled, and extended local delivery of paclitaxel achieving concentrations 10,000× tissue levels compared to systemic administration. Films containing entrapped and covalently-bound paclitaxel implanted in the tumor bed, immediately after resection of human cell line-derived chondrosarcoma and patient-derived xenograft liposarcoma and leiomyosarcoma in mice, improve median 90- or 200-day recurrence-free and overall survival compared to control mice. Furthermore, mice in the experimental film arm show no film-related morbidity. Continuous, extended, high-dose paclitaxel delivery via this unique polymer platform safely improves outcomes in three different sarcoma models and provides a rationale for future incorporation into human trials.

Synthesis of cyclic α-pinane carbonate - a potential monomer for bio-based polymers

This work reports the first known synthesis of α-pinane carbonate from an α-pinene derivative. Pinane carbonate is potentially useful as a monomer for poly(pinane carbonate), which would be a sustainable bio-based polymer. α-Pinene is a major waste product from the pulp and paper industries and the most naturally abundant monoterpene in turpentine oil. α-Pinene is routinely converted to pinene oxide and pinanediol, but no study has yet demonstrated the conversion of pinanediol into α-pinane carbonate. Here, α-pinane carbonate was synthesised via carboxylation of α-pinanediol with dimethyl carbonate under base catalysis using triazabicyclodecene guanidine (TBD). 81.1 ± 2.8% α-pinane carbonate yield was achieved at 98.7% purity. The produced α-pinane carbonate was a white crystalline solid with a melting point of 86 °C. It was characterised using FTIR, NMR, GCMS and a quadrupole time-of-flight (QTOF) mass spectrometer. The FTIR exhibited a C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> O peak at 1794 cm⁻¹ confirming the presence of a cyclic carbonate. GCMS showed that the α-pinane carbonate fragments with loss of CO₂, forming pinene epoxide. Base hydrolysis of the α-pinane carbonate using NaOH/ethanol/water regenerated the pinanediol with formations of Na₂CO₃.

Synthesis of α-pinane carbonate from an α-pinene derivative.

Simple and Efficient Synthesis of Functionalized Cyclic Carbonate Monomers Using Carbon Dioxide

Aliphatic polycarbonates represent an important class of materials with diverse applications ranging from battery electrolytes, polyurethane intermediates, and materials for biomedical applications. These materials can be produced via the ring-opening polymerization (ROP) of six- to eight-membered cyclic carbonates derived from precursor 1,3- and 1,5-diols. These diols can contain a range of functional groups depending on the desired thermal, mechanical, and solution properties. Generally, the ring closure to form the cyclic carbonate requires the use of undesirable and hazardous reagents. Advances in synthetic methodologies and catalysis have enabled the use of carbon dioxide (CO₂) to perform these transformations with a high conversion of diol to cyclic carbonate, yet modest isolated yields due to oligomerization side reactions. In this Letter, we evaluate a series of bases in the presence of p-toluenesulfonyl chloride and the appropriate diol to better understand their effect on the yield and presence of oligomer byproducts during cyclic carbonate formation from CO₂. From this study, N,N-tetramethylethylenediamine (TMEDA) was identified as an optimal base, facilitating the preparation of a diverse array of both six- and eight-membered carbonates from CO₂ within 10 to 15 min. The robust conditions for both, the preparation of the diol precursor, and the TMEDA-mediated carbonate synthesis enabled readily telescoping the two-step reaction sequence, greatly simplifying the process of monomer preparation.

Synthesis of functional CO2-based polycarbonates via dinuclear nickel nitrophenolate-based catalysis for degradable surfactant and drug-loaded nanoparticle applications

Functional CO₂-based polycarbonates via efficient catalysis strategies using well-defined dinickel catalysts and their biomedical applications for the synthesis of drug-loaded nanoparticles were reported.

Nonionic Aliphatic Polycarbonate Diblock Copolymers Based on CO2, 1,2-Butylene Oxide, and mPEG: Synthesis, Micellization, and Solubilization

Carbon dioxide (CO₂) is a renewable carbon source that is easily available in high purity and is utilized as a co-monomer in the direct ring-opening polymerization of epoxides to obtain aliphatic polycarbonates. In this work, degradable aliphatic polycarbonate diblock copolymers (mPEG- b-PBC) are synthesized via catalytic copolymerization of CO₂ and 1,2-butylene oxide, starting from monomethoxy poly(ethylene glycol) (mPEG) as a chain transfer reagent. The polymerization proceeds at low temperatures and high CO₂ pressure, utilizing the established binary catalytic system ( R, R)-Co(salen)Cl/[PPN]Cl. Amphiphilic nonionic diblock copolymers with varying PBC block lengths and hydrophilic-lipophilic balance values between 9 and 16 are synthesized. The polymers are characterized via NMR and Fourier transform infrared spectroscopies as well as size exclusion chromatography, exhibiting molecular weights ranging from 2400 to 4100 g mol^-1 with narrow dispersities ( Đ = M_w/ M_n) from 1.07 to 1.18. Furthermore, the thermal properties, i.e., T_g, T_m, and T_d, are determined. Surface tension measurements prove that the amphiphilic polymers form micelles above the critical micelle concentration, whereas small-angle neutron scattering shows that they are of nearly spherical shape. Adding small amounts of the synthesized mPEG- b-PBC polymers to different microemulsion systems, we found that the polymers were able to strongly increase the efficiency of medium-chain surfactants to solubilize polar oils.

Poly(Alkyl Glycidate Carbonate)s as Degradable Pressure-Sensitive Adhesives

Insertion of CO₂ into the polyacrylate backbone, forming poly(carbonate) analogues, provides an environmentally friendly and biocompatible alternative. The synthesis of five poly(carbonate) analogues of poly(methyl acrylate), poly(ethyl acrylate), and poly(butyl acrylate) is described. The polymers are prepared using the salen cobalt(III) complex catalyzed copolymerization of CO₂ and a derivatized oxirane. All the carbonate analogues possess higher glass-transition temperatures (T_g =32 to -5 °C) than alkyl acrylates (T_g =10 to -50 °C), however, the carbonate analogues (T_d ≈230 °C) undergo thermal decomposition at lower temperatures than their acrylate counterparts (T_d ≈380 °C). The poly(alkyl carbonates) exhibit compositional-dependent adhesivity. The poly(carbonate) analogues degrade into glycerol, alcohol, and CO₂ in a time- and pH-dependent manner with the rate of degradation accelerated at higher pH conditions, in contrast to poly(acrylate)s.

Crystalline CO2 -Based Aliphatic Polycarbonates with Long Alkyl Chains

Carbon dioxide (CO₂ ) is an easily available, renewable carbon source and can be utilized as a comonomer in the catalytic ring-opening polymerization of epoxides to generate aliphatic polycarbonates. Dodecyl glycidyl ether (DDGE) is copolymerized with CO₂ and propylene oxide (PO) to obtain aliphatic poly(dodecyl glycidyl ether carbonate) and poly(propylene carbonate-co-dodecyl glycidyl ether carbonate) copolymers, respectively. The polymerization proceeds at 30 °C and high CO₂ pressure utilizing the established binary catalytic system (R,R)-Co(salen)Cl/[PPN]Cl. The copolymers with varying DDGE:PO ratios are characterized via NMR, FT-IR spectroscopy, and SEC, exhibiting high molecular weights between 11 400 and 37 900 g mol^-1 with dispersities (Р= M _w /M _n ) in the range of 1.37-1.61. Copolymers with T _g s of -11 °C or T _m s from 5 to 15 °C and thermal decomposition >200 °C depending on the comonomer ratio, are obtained as determined by differential scanning calorimetry/TGA.

Degradable high Tg sugar-derived polycarbonates from isosorbide and dihydroxyacetone

Step-growth polymerization and degradation behavior of fully sugar-derived high T_g alternating and random polycarbonates from isosorbide and dihydroxyacetone.

Current advances in the catalytic conversion of carbon dioxide by molecular catalysts: an update

Recent advances (2015–) in the catalytic conversion of CO₂ by metal-based and metal-free systems are discussed.

Fully alternating and regioselective ring-opening copolymerization of phthalic anhydride with epoxides using highly active metal-free Lewis pairs as a catalyst

Cooperative metal-free Lewis pairs effectively catalysed controlled ring-opening copolymerization of phthalic anhydride (PA) with epoxides.

Synthesis of poly(1,2-glycerol carbonate)-paclitaxel conjugates and their utility as a single high-dose replacement for multi-dose treatment regimens in peritoneal cancer

A high drug-density, biodegradable polymeric nanocarrier replaces multi-dose paclitaxel treatment regimens.

Current chemotherapeutic dosing strategies are limited by the toxicity of anticancer agents and therefore rely on multiple low-dose administrations. As an alternative, we describe a novel sustained-release, biodegradable polymeric nanocarrier as a single administration replacement of multi-dose paclitaxel (PTX) treatment regimens. The first synthesis of poly(1,2-glycerol carbonate)-graft-succinic acid-paclitaxel (PGC–PTX) is described, and its use enables high, controlled PTX loadings of up to 74 wt%. Moreover, the polymer backbone is composed of biocompatible building blocks—glycerol and carbon dioxide. When formulated as nanoparticles (NPs), PGC–PTX NPs exhibit PTX concentrations >15 mg mL^–1, sub-100 nm diameters, narrow dispersity, storage stability for up to 6 months, and sustained and controlled PTX release kinetics over an extended period of 70 days. A safely administered single dose of PGC–PTX NPs contains more PTX than the median lethal dose of standard PTX. In murine models of peritoneal carcinomatosis, in which the clinical implementation of multi-dose intraperitoneal (IP) treatment regimens is limited by catheter-related complications, PGC–PTX NPs exhibit improved safety at high doses, tumor localization, and efficacy even after a single IP injection, with comparable curative effect to PTX administered as a multi-dose IP treatment regimen.

Acid-Labile Surfactants Based on Poly(ethylene glycol), Carbon Dioxide and Propylene Oxide: Miniemulsion Polymerization and Degradation Studies

Partially degradable, nonionic AB and ABA type di- and triblock copolymers based on poly(propylene carbonate) and poly(ethylene glycol) blocks were synthesized via immortal copolymerization of carbon dioxide and propylene oxide, using mPEG or PEG as a macroinitiator, and (R,R)-(salcy)-CoOBzF₅ as a catalyst in a solvent-free one-pot procedure. The amphiphilic surfactants were prepared with molecular weights (M_n) between 2800 and 10,000 g·mol^-¹ with narrow molecular weight distributions (1.03⁻1.09). The copolymers were characterized using ¹H-, ¹³C- and DOSY-NMR spectroscopy and size exclusion chromatography (SEC). Surface-active properties were determined by surface tension measurements (critical micelle concentration, CMC; CMC range: 1⁻14 mg·mL^-¹). Degradation of the acid-labile polycarbonate blocks was investigated in aqueous solution using online ¹H-NMR spectroscopy and SEC. The amphiphilic polymers were used as surfactants in a direct miniemulsion polymerization for poly(styrene) (PS) nanoparticles with mean diameter of 270 to 940 nm. The usage of an acid-triggered precipitation of the emulsion simplified the separation of the particles from the surfactant and purification of the nanoparticles.

Bio-derived polymers for coating applications: comparing poly(limonene carbonate) and poly(cyclohexadiene carbonate)

Two fully bio-based polycarbonates, poly(limonene carbonate) and poly(cylcohexadiene carbonate), were post-functionalized via thiol–ene reactions and tested as future coating materials.

Synthetic Biomaterials from Metabolically Derived Synthons

The utility of metabolic synthons as the building blocks for new biomaterials is based on the early application and success of hydroxy acid based polyesters as degradable sutures and controlled drug delivery matrices. The sheer number of potential monomers derived from the metabolome (e.g., lactic acid, dihydroxyacetone, glycerol, fumarate) gives rise to almost limitless biomaterial structural possibilities, functionality, and performance characteristics, as well as opportunities for the synthesis of new polymers. This review describes recent advances in new chemistries, as well as the inventive use of traditional chemistries, toward the design and synthesis of new polymers. Specific polymeric biomaterials can be prepared for use in varied medical applications (e.g., drug delivery, tissue engineering, wound repair, etc.) through judicious selection of the monomer and backbone linkage.

One-pot synthesis and postpolymerization functionalization of cyclic carbonate/epoxide-difunctional polycarbonates prepared by regioselective diepoxide/CO2 copolymerization

Polycarbonate with cyclic carbonate and epoxide-difunctional groups is synthesized via a copolymerization of 4-VCHO and CO₂ in one-step, which possess high T_g and afford a versatile platform for the post-functionalziation.

Synthesis of four- and six-armed star-shaped polycarbonates by immortal alternating copolymerization of CO2 and propylene oxide

A series of four- and six-armed star-shaped poly(propylene carbonate)s (PPCs) have successfully been synthesized by carbon dioxide (CO₂)–propylene oxide (PO) immortal alternating copolymerization initiated either from tetra- or hexa-functional carboxylic acids.

Construction of Versatile and Functional Nanostructures Derived from CO2 -based Polycarbonates

The construction of amphiphilic polycarbonates through epoxides/CO2 coupling is a challenging aim to provide more diverse CO2 -based functional materials. In this report, we demonstrate the facile preparation of diverse and functional nanoparticles derived from a CO2 -based triblock polycarbonate system. By the judicious use of water as chain-transfer reagent in the propylene oxide/CO2 polymerization, poly(propylene carbonate (PPC) diols are successfully produced and serve as macroinitiators in the subsequent allyl glycidyl ether/CO2 coupling reaction. The resulting ABA triblock polycarbonate can be further functionalized with various thiols by radical mediated thiol-ene click chemistry, followed by self-assembly in deionized water to construct a versatile and functional nanostructure system. This class of amphiphilic polycarbonates could embody a powerful platform for biomedical applications.

Synthesis of Aliphatic Poly(ether 1,2-glycerol carbonate)s via Copolymerization of CO2 with Glycidyl Ethers Using a Cobalt Salen Catalyst and Study of a Thermally Stable Solid Polymer Electrolyte

The synthesis and characterization of linear poly(ether 1,2-glycerol carbonate)s derivatized with pendant butyl, octyl, or stearyl tethers are reported. The polymers are obtained via the ring-opening copolymerization of butyl, octyl, or stearic glycidyl ethers with carbon dioxide using the [rac-SalcyCo^IIIDNP] catalyst bearing a quaternary ammonium salt. Synthesized polymers were characterized by ¹H and ¹³C NMR spectroscopy, FT-IR, gel permeation chromatography (GPC), differential scanning calorimetry (DSC), and rheometry. Polymers with controlled molecular weights in the range of 8970-31 900 g/mol were obtained with low polydispersities between 1.1 and 1.4. Thermal properties of the materials confirm amorphous structures of the polymers with butyl and octyl chains, with glass transition temperatures of -24 and -34 °C, respectively. The stearyl tether polymer exhibited a melting point of 55 °C. Additionally, the potential of poly(butyl ether 1,2-glycerol carbonate) as a thermally stable solid polymer electrolyte was investigated, and it exhibits temperature-dependent conductivity with values comparable to those of optimized PEO-based electrolytes.

The battle for the "green" polymer. Different approaches for biopolymer synthesis: bioadvantaged vs. bioreplacement

Biopolymers have been used throughout history; however, in the last two centuries they have seen a decrease in their utilization as the proliferation of inexpensive and mass-produced materials from petrochemical feedstocks quickly became better-suited to meeting society's needs. In recent years, high petroleum prices and the concern of society to adopt greener and cleaner products has led to an increased interest in biorenewable polymers and the use of sustainable technologies to produce them. Industrial and academic researchers alike have targeted several routes for producing these renewable materials. In this perspective, we compare and contrast two distinct approaches to the economical realization of these materials. One mentality that has emerged we term "bioreplacement", in which the fields of synthetic biology and catalysis collaborate to coax petrochemical monomers from sugars and lignocellulosic feedstocks that can subsequently be used in precisely the same ways to produce precisely the same polymers as we know today. For example, the metabolic engineering of bacteria is currently being explored as a viable route to common monomers such as butadiene, isoprene, styrene, acrylic acid, and sebacic acid, amongst others. Another motif that has recently gained traction may be referred to as the "bioadvantage" strategy, where the multifunctional "monomers" given to us by nature are combined in novel ways using novel chemistries to yield new polymers with new properties; for these materials to compete with their petroleum-based counterparts, they must add some advantage, for example less cost. For instance, acrylated epoxidized soybean oil readily undergoes polymerization to thermosets and recently, thermoplastic rubbers. Additionally, many plants produce pre-polymeric or polymeric materials that require little or no post modification to extract and make use of these compounds.

Lignocellulosic biomass: a sustainable platform for the production of bio-based chemicals and polymers

The ongoing research activities in the field of lignocellulosic biomass for production of value-added chemicals and polymers that can be utilized to replace petroleum-based materials are reviewed.