Highly Regioselective and Alternating Copolymerization of Racemic Styrene Oxide and Carbon Dioxide via Heterogeneous Double Metal Cyanide Complex Catalyst

Unraveling the role of internal-external metal substitution in Zn3[Co(CN6)]2 for the styrene oxide-CO2 cycloaddition reaction

We investigated the influence of the structural and textural properties along with the chemical environment of pure Zn3[Co(CN)6]2 in comparison with the modified phases on the catalytic performance in the cycloaddition reaction between styrene oxide and CO2. We relate these to the proposed reaction pathways and mechanisms. The natural cubic phase (ZnCoCn) was dehydrated to obtain the rhombohedral phase (ZnCoRn), while the stabilized cubic phase (ZnCoCs) was synthesized by substituting external zinc atoms with cadmium atoms. The rhombohedral stabilized phase (ZnCoRs) was achieved by the internal cobalt change with iron. All the materials were extensively characterized using X-ray diffraction (XRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray photoelectron spectroscopy (XPS), and N2 adsorption. The catalytic behavior of the four phases was tested. The crystalline structure of each phase was obtained, and by XPS, it was demonstrated that the chemical environments of all elements conforming to the rhombohedral stabilized phase are different from those of all other materials owing to the exchange of internal metals. The bulk textural properties were similar; only the ZnCoRs presented more micropore area but did not exceed the total surface area of the other materials. The product distribution and yield at reaction times of 2 h and 6 h were closer to those of the cubic phases. The natural rhombohedral phase exhibits the best performance. The tetrabutylammonium bromide (TBAB) and rhombohedral stabilized phase work together to yield a bigger copolymer quantity at the expense of the styrene carbonate (StCO3) production. From the proposed mechanism, the TBAB cation (TBA+) has a "protection" function that drives the closing of the StCO3 ring; however, the charge distribution anisotropy in the four nitrogen atoms generated by Co replacement in ZnCoRs could hold TBA+ as the reaction time progressed, causing an unavailability that triggered the copolymerization propagation step.

Triethyl borane-regulated selective production of polycarbonates and cyclic carbonates for the coupling reaction of CO2 with epoxides

The copolymerization of CO₂ and epoxides bearing phenyl group is achieved by the combination of Lewis bases and excess triethyl borane that decides the selectivity.

A Lewis acid β-diiminato-zinc-complex as all-rounder for co- and terpolymerisation of various epoxides with carbon dioxide

A β-diiminato-zinc-N(SiMe3)2 complex (1) was synthesised and fully characterised, including an X-ray diffraction study. The activity of catalyst 1 towards the coupling reaction of CO2 and various epoxides, including propylene oxide (PO), cyclohexene oxide (CHO), styrene oxide (SO), limonene oxide (LO), octene oxide (OO) and epichlorohydrin (ECH), was investigated. Terpolymerisation of CO2, PO and LO, as well as CO2, CHO and PO, was successfully realised, resulting in polymers with adjustable glass transition temperatures and transparencies. Reaction conditions such as temperature, pressure and catalyst concentration were varied to find the optimal reaction values, especially regarding LO/CO2. In situ IR experiments hinted that at 60 °C and a critical LO concentration, polymerisation and depolymerisation are in an equilibrium (ceiling effect). Pressurising catalyst 1 with carbon dioxide resulted in a dimeric catalyst (2) with a OSiMe3 group as a new initiator. Homopolymerisation of different epoxides was carried out in order to explain the reactivity concerning copolymerisation reaction of CO2 and epoxides.

Poly(monothiocarbonate)s from the Alternating and Regioselective Copolymerization of Carbonyl Sulfide with Epoxides

Carbonyl sulfide (COS) is an air pollutant that causes acid rain, ozonosphere damage, and carbon dioxide (CO₂) generation. It is a heterocumulene and structural analogue of CO₂. Relevant to organic synthesis, it is a source of C═O or C═S groups and thus an ideal one-carbon (C1) building block for synthesizing sulfur-containing polymers through the similar route of CO₂ copolymerization. In contrast, traditional synthesis of sulfur-containing polymers often involves the condensation of thiols with phosgene and ring-opening polymerization of cyclic thiocarbonates that are generally derived from thiols and phosgene; thus, COS/epoxide copolymerization is a "greener" route to supplement or supplant current processes for the production of sulfur-containing polymers. This Accounts highlights our efforts on the discovery of the selective formation of poly(monothiocarbonate)s from COS with epoxides via heterogeneous zinc-cobalt double metal cyanide complex (Zn-Co(III) DMCC) and homogeneous (salen)CrX complexes. The catalytic activity and selectivity of Zn-Co(III) DMCC for COS/epoxide copolymerization are similar to those for CO₂/epoxide copolymerization. (salen)CrX complexes accompanied by onium salts exhibited high activity and selectivity for COS/epoxide copolymerization under mild conditions, affording copolymers with >99% monothiocarbonate units and high tail-to-head content up to 99%. By way of contrast, these catalysts often show moderate or low activity for CO₂/epoxide copolymerization. Of note, a specialty of COS/epoxide copolymerization is the occurrence of an oxygen-sulfur exchange reaction (O/S ER), which may produce carbonate and dithiocarbonate units. O/S ER, which are induced by the metal-OH bond regenerated by chain transfer reactions, can be kinetically inhibited by changing the reaction conditions. We provide a thorough mechanistic understanding of the electronic/steric effect of the catalysts on the regioselectivity of COS copolymerization. The regioselectivity of the copolymerization originates from the solely nucleophilic attack of the sulfur anion to methylene of the epoxide, and thus, the chiral configuration of the monosubstituted epoxides is retained. COS-based copolymers are highly transparent sulfur-containing polymers with excellent optical properties, such as high refractive index and Abbe number. Thanks to their good solubility and many available epoxides, COS/epoxide copolymers can potentially be a new applicable optical material. Very recently, crystalline COS-based polymers with or without chiral carbons have been synthesized, which may further expand the scope of application of these new materials.

Polymerization of Ethylene Oxide, Propylene Oxide, and Other Alkylene Oxides: Synthesis, Novel Polymer Architectures, and Bioconjugation

The review summarizes current trends and developments in the polymerization of alkylene oxides in the last two decades since 1995, with a particular focus on the most important epoxide monomers ethylene oxide (EO), propylene oxide (PO), and butylene oxide (BO). Classical synthetic pathways, i.e., anionic polymerization, coordination polymerization, and cationic polymerization of epoxides (oxiranes), are briefly reviewed. The main focus of the review lies on more recent and in some cases metal-free methods for epoxide polymerization, i.e., the activated monomer strategy, the use of organocatalysts, such as N-heterocyclic carbenes (NHCs) and N-heterocyclic olefins (NHOs) as well as phosphazene bases. In addition, the commercially relevant double-metal cyanide (DMC) catalyst systems are discussed. Besides the synthetic progress, new types of multifunctional linear PEG (mf-PEG) and PPO structures accessible by copolymerization of EO or PO with functional epoxide comonomers are presented as well as complex branched, hyperbranched, and dendrimer like polyethers. Amphiphilic block copolymers based on PEO and PPO (Poloxamers and Pluronics) and advances in the area of PEGylation as the most important bioconjugation strategy are also summarized. With the ever growing toolbox for epoxide polymerization, a "polyether universe" may be envisaged that in its structural diversity parallels the immense variety of structural options available for polymers based on vinyl monomers with a purely carbon-based backbone.

Ring-opening copolymerization (ROCOP): synthesis and properties of polyesters and polycarbonates

This feature article highlights the opportunities presented by ring-opening copolymerization (ROCOP) as a controlled route to prepare polyesters and polycarbonates.

Synthesis of fully alternating polycarbonate with low Tg from carbon dioxide and bio-based fatty acid

Perfectly alternating copolymerization of CO₂ with a bio-based epoxide is reported with a heterogeneous Zn–Co(iii) DMCC, affording copolymers with low T_g values of −38 to −44 °C and two end hydroxyl groups.

Regio-selective synthesis of polyepichlorohydrin diol using Zn–Co(iii) double metal cyanide complex

This work describes the first regio-selective synthesis of poly(epichlorohydrin) diol via a simple one-pot bulk polymerization with a heterogeneous catalyst.

Asymmetric copolymerization of CO2 with meso-epoxides mediated by dinuclear cobalt(III) complexes: unprecedented enantioselectivity and activity

Unprecedented enantioselectivity and catalytic activity was observed in the asymmetric copolymerization of CO2 with meso-epoxides (including the less reactive cyclopentene oxide) mediated by the dinuclear Co(III) complex (S,S,S,S)-1 under mild conditions. The resultant copolymers possess more than 99 % carbonate linkages and a perfectly isotactic structure.