Reversible Transformation of Nanostructured Polymer Particles

Core-shell particle formation via Co-assembly of AB diblock copolymers and nanoparticles in 3D soft confinement

Core-shell particle formation via co-assembly of AB diblock copolymers and nanoparticles in 3D soft confinement was studied using a simulated annealing method. Several sequences of soft confinement-induced core-shell particles were predicted as functions of the volume fraction of the nanoparticle to core-shell particles, the incompatibility between blocks, the volume fractions of A-blocks, the chain length of AB diblocks, the eccentricity of the nanoparticle, and the initial concentration of copolymers. Simulation results demonstrate that those factors are able to tune the morphology of the core-shell particles precisely. Calculated data indicate that the copolymer chain was located between a hard confinement wall composed of the nanoparticle and a soft confinement wall composed of solvents, and the arrangement direction of the copolymer chains was in a competitive equilibrium between the two. We anticipate that this work will be helpful and instructive for the preparation of polymer shells with different structures and shapes, as well as the study of self-assembly morphology of copolymers in a complex confinement systems.

Shell with Striped, Helical, and Bipolar Lamellae Structures from Soft Confinement-Induced Self-Assembly of AB Diblock Copolymers on a Nanocylinder

The soft confinement-induced self-assembly of AB diblock copolymers on a nanocylinder is studied via a simulated annealing method. The formation of multiple copolymer shells was predicted by varying the interfacial interaction, the size of confinement, and the height and diameter of the nanocylinder. The competition between solvent repulsion and nanocylinder attraction determined the degree of encapsulation of the copolymer shell. The formation of a helical copolymer shell was induced by the maximization of conformational entropy. The preferential distribution position of copolymers on anisotropic nanocylinder surfaces was induced by interfacial energy minimization. Our study contributes to the understanding of the formation mechanism of the helical structure in block copolymer aggregates and the fabrication of copolymer shells with predesigned morphologies.

Encounter between Gyroid and Lamellae in Janus Colloidal Particles Self-Assembled by a Rod-Coil Block Copolymer

Controlling the internal structure of block copolymer (BCP) particles has a significant influence on its functionalities. Here, a structure-controlling method is proposed to regulate the internal structure of BCP Janus colloidal particles using different surfactants. Different microphase separation processes take place in two connected halves of the Janus particles. An order-order transition between gyroid and lamellar phases is observed in polymeric colloids. The epitaxial growth during the structural transformation from gyroid to lamellar phase undergoes a two-layered rearrangement to accommodate the interdomain spacing mismatch between these two phases. This self-assembly behavior can be ascribed to the preferential wetting of BCP chains at the interface, which can change the chain conformation of different blocks. The Janus colloidal particles can further experience a reversible phase transition by restructuring the polymer particles under solvent vapor. It is anticipated that the new phase behavior found in Janus particles can not only enrich the self-assembly study of BCPs but also provide opportunities for various applications based on Janus particles with ordered structures.

Stimuli-responsive nanoparticle self-assembly at complex fluid interfaces: a new insight into dynamic surface chemistry

The self-assembly of core/shell nanoparticles (NPs) at fluid interfaces is a rapidly evolving area with tremendous potential in various fields, including biomedicine, display devices, catalysts, and sensors. This review provides an in-depth exploration of the current state-of-the-art in the programmed design of stimuli-responsive NP assemblies, with a specific focus on inorganic core/organic shell NPs below 100 nm for their responsive adsorption properties at fluid and polymer interfaces. The interface properties, such as ligands, charge, and surface chemistry, play a significant role in dictating the forces and energies governing both NP-NP and NP-hosting matrix interactions. We highlight the fundamental principles governing the reversible surface chemistry of NPs and present detailed experimental examples in the following three key aspects of stimuli-responsive NP assembly: (i) stimuli-driven assembly of NPs at the air/liquid interface, (ii) reversible NP assembly at the liquid/liquid interface, including films and Pickering emulsions, and (iii) hybrid NP assemblies at the polymer/polymer and polymer/water interfaces that exhibit stimuli-responsive behaviors. Finally, we address current challenges in existing approaches and offer a new perspective on the advances in this field.

Morphological Evolution of Hybrid Block Copolymer Particles: Toward Magnetic Responsive Particles

The co-assembly of block copolymers (BCPs) and inorganic nanoparticles (NPs) under emulsion confinement allows facile access to hybrid polymeric colloids with controlled hierarchical structures. Here, the effect of inorganic NPs on the structure of the hybrid BCP particles and the local distribution of NPs are studied, with a particular focus on comparing Au and Fe3O4 NPs. To focus on the effect of the NP core, Au and Fe3O4 NPs stabilized with oleyl ligands were synthesized, having a comparable diameter and grafting density. The confined co-assembly of symmetric polystyrene-b-poly(1,4-butadiene) (PS-b-PB) BCPs and NPs in evaporative emulsions resulted in particles with various morphologies including striped ellipsoids, onion-like particles, and their intermediates. The major difference in PS-b-PB/Au and PS-b-PB/Fe3O4 particles was found in the distribution of NPs inside the particles that affected the overall particle morphology. Au NPs were selectively localized inside PB domains with random distributions regardless of the particle morphology. Above the critical volume fraction, however, Au NPs induced the morphological transition of onion-like particles into ellipsoids by acting as an NP surfactant. For PS-b-PB/Fe3O4 ellipsoids, Fe3O4 NPs clustered and segregated to the particle/surrounding interface of the ellipsoids even at a low volume fraction, while Fe3O4 NPs were selectively localized in the middle of PB domains in a string-like pattern for PS-b-PB/Fe3O4 onion-like particles.

The Process-Directed Self-Assembly of Block Copolymer Particles

The kinetic paths of structural evolution and formation of block copolymer (BCP) particles are explored using dynamic self-consistent field theory (DSCFT). It is shown that the process-directed self-assembly of BCP immersed in a poor solvent leads to the formation of striped ellipsoids, onion-like particles and double-spiral lamellar particles. The theory predicts a reversible path of shape transition between onion-like particles and striped ellipsoidal ones by regulating the temperature (related to the Flory-Huggins parameter between the two components of BCP, χAB ) and the selectivity of solvent toward one of the two BCP components. Furthermore, a kinetic path of shape transition from onion-like particles to double-spiral lamellar particles, and then back to onion-like particles is demonstrated. By investigating the inner-structural evolution of a BCP particle, it is identified that changing the intermediate bi-continuous structure into a layered one is crucial for the formation of striped ellipsoidal particles. Another interesting finding is that the formation of onion-like particles is characterized by a two-stage microphase separation. The first is induced by the solvent preference, and the second is controlled by the thermodynamics. The findings lead to an effective way of tailoring nanostructure of BCP particles for various industrial applications.

Liquid-liquid phase separation of immiscible polymers at double emulsion interfaces for configurable microcapsules

Liquid-liquid phase separation at complex interfaces is a common phenomenon in biological systems and is also a fundamental basis to create synthetic materials in multicomponent mixtures. Understanding the liquid-liquid phase separation in well-defined macromolecular systems is anticipated to shed light on similar behaviors in cross-disciplinary areas. Here we study a series of immiscible polymers and reveal a generic phase diagram of liquid-liquid phase separation at double emulsion interfaces, which depicts the equilibrium structures by interfacial tension and polymer fraction. We further reveal that the interfacial tensions in various systems fall on a linear relationship with spreading coefficients. Based on this theoretical guideline, the liquid-liquid phase separation can be modulated by a low fraction of amphiphilic block copolymers, leading the double emulsion droplets configurable between compartments and anisotropic shapes. The solidified anisotropic microcapsules could provide unique orientation-sensitive optical properties and thermomechanical responses. The theoretical analysis and experimental protocol in this study yield a generalizable strategy to prepare multiphase double emulsions with controlled structures and desired properties.

Confined Self-Assembly of Block Copolymers within Emulsion Droplets: A Perspective

When the self-assembly of block copolymers (BCPs) occurs within organic emulsion droplets in the aqueous phase, the strong structural frustration of BCP chains causes the formation of a series of well-regulated BCP particles that cannot be obtained from the self-assembly of BCPs in the bulk state or solution. In this Perspective, we review the recent progress of the self-assembly of BCPs confined in emulsion droplets. The governing factors of the structure and morphology of the as-prepared BCP particles are summarized. In addition, the applications of the as-prepared BCP particles in photonic crystals and drug release are discussed. Finally, we also give a forward-looking perspective on future challenges in this field.

A Versatile 3D-Confined Self-Assembly Strategy for Anisotropic and Ordered Mesoporous Carbon Microparticles

Mesoporous carbon microparticles (MCMPs) with anisotropic shapes and ordered structures are attractive materials that remain challenging to access. In this study, a facile yet versatile route is developed to prepare anisotropic MCMPs by combining neutral interface-guided 3D confined self-assembly (3D-CSA) of block copolymer (BCP) with a self-templated direct carbonization strategy. This route enables pre-engineering BCP into microparticles with oblate shape and hexagonal packing cylindrical mesostructures, followed by selective crosslinking and decorating of their continuous phase with functional species (such as platinum nanoparticles, Pt NPs) via in situ growth. To realize uniform in situ growth, a "guest exchange" strategy is proposed to make room for functional species and a pre-crosslinking strategy is developed to preserve the structural stability of preformed BCP microparticles during infiltration. Finally, Pt NP-loaded MCMPs are derived from the continuous phase of BCP microparticles through selective self-templated direct carbonization without using any external carbon source. This study introduces an effective concept to obtain functional species-loaded and N-doped MCMPs with oblate shape and almost hexagonal structure (p6mm), which would find important applications in fuel cells, separation, and heterogeneous catalysis.

Regioselective Seeded Polymerization in Block Copolymer Nanoparticles: Post-Assembly Control of Colloidal Features

Post-assembly modifications are efficient tools to adjust colloidal features of block copolymer (BCP) particles. However, existing methods often address particle shape, morphology, and chemical functionality individually. For simultaneous control, we transferred the concept of seeded polymerization to phase separated BCP particles. Key to our approach is the regioselective polymerization of (functional) monomers inside specific BCP domains. This was demonstrated in striped PS-b-P2VP ellipsoids. Here, polymerization of styrene preferably occurs in PS domains and increases PS lamellar thickness up to 5-fold. The resulting asymmetric lamellar morphology also changes the particle shape, i.e., increases the aspect ratio. Using 4-vinylbenzyl azide as co-monomer, azides as chemical functionalities can be added selectively to the PS domains. Overall, our simple and versatile method gives access to various multifunctional BCP colloids from a single batch of pre-formed particles.

Light-driven sequential shape transformation of block copolymer particles through three-dimensional confined self-assembly

Shape-controlled block copolymer (BCP) particles that respond to light stimulus have drawn great attention due to their promising applications in smart materials, yet polymeric particles with light-triggered controllable sequential shape transformation (SST) are still rarely reported. By confined co-assembly of polystyrene-b-poly(2-vinylpyridine) (PS-b-P2VP) and azo-containing light-responsive additives within emulsions, herein, we fabricated BCP particles with light-controlled SST behavior. Attributed to the quaternization of P2VP chains with bromoalkyl additives and the trans-cis isomerization of an azo group under UV light, the interfacial interactions between the BCPs and the surrounding aqueous phase are significantly varied; therefore, the particles exhibit three distinct phases in sequence: (1) elongation of ellipsoidal particles with increasing domain spacing; (2) shape transformation of elongated ellipsoidal particles into accordion-like particles; and (3) disassembly of polymer particles into small spheres. In addition, these particles with SST behavior can be used in light-controlled drug release at a high spatial-temporal resolution, demonstrating their potential in clinical settings and biomedicine.

Confinement-Assembly of Terpolymer-based Janus Nanoparticles

While the confinement assembly of block copolymers (BCPs) into functional microparticles has been extensively studied, little is known about the behavior of Janus nanoparticles (JNPs) in spherical confinement. Here, we investigate the confinement self-assembly of JNPs in drying emulsion droplets and compare their behavior to their ABC triblock terpolymer precursor. Emulsions of both materials were prepared using Shirasu Porous Glass (SPG) membranes leading to narrow size distributions of the microparticles with average hydrodynamic radii in the range of R_h = 250 - 500 nm (depending on the pore radius, R_pore ). The internal structure of the microparticles was verified with transmission electron microscopy (TEM) on ultrathin cross-sections and compared to the corresponding bulk morphologies. While the confinement-assembly of terpolymers resulted in microparticles with ordered inner morphologies, order for JNPs diminished when the Janus balance (JB) deviated from parity. This article is protected by copyright. All rights reserved.

A 3D Hierarchical Host with Enhanced Sodiophilicity Enabling Anode-Free Sodium-Metal Batteries

Sodium-metal batteries (SMBs) are considered as a compliment to lithium-metal batteries for next-generation high-energy batteries because of their low cost and the abundance of sodium (Na). Herein, a 3D nanostructured porous carbon particle containing carbon-shell-coated Fe nanoparticles (PC-CFe) is employed as a highly reversible Na-metal host. PC-CFe has a unique 3D hierarchy based on sub-micrometer-sized carbon particles, ordered open channels, and evenly distributed carbon-coated Fe nanoparticles (CFe) on the surface. PC-CFe achieves high reversibility of Na plating/stripping processes over 500 cycles with a Coulombic efficiency of 99.6% at 10 mA cm^-2 with 10 mAh cm^-2 in Na//Cu asymmetric cells, as well as over 14 400 cycles at 60 mA cm^-2 in Na//Na symmetric cells. Density functional theory calculations reveal that the superior cycling performance of PC-CFe stems from the stronger adsorption of Na on the surface of the CFe, providing initial nucleation sites more favorable to Na deposition. Moreover, the full cell with a PC-CFe host without Na metal and a high-loading Na₃ V₂ (PO₄ )₃ cathode (10 mg cm^-2 ) maintains a high capacity of 103 mAh g^-1 at 1 mA cm^-2 even after 100 cycles, demonstrating the operation of anode-free SMBs.

Solvent Annealing of Striped Ellipsoidal Block Copolymer Particles: Reversible Control over Lamellae Asymmetry, Aspect Ratio, and Particle Surface

Solvent annealing is a versatile tool to adjust the shape and morphology of block copolymer (BCP) particles. During this process, polar solvents are often used for block-selective swelling. However, such water-miscible solvents can induce (partial) solubilization of one block in the surrounding aqueous medium, thus, causing complex structural variations and even particle disassembly. To reduce the complexity in morphology control, we focused on toluene as a nonpolar polystyrene-selective solvent for the annealing of striped polystyrene-b-poly(2-vinylpyridine) (PS-b-P2VP) ellipsoids. The selective stretching of PS chains produces unique asymmetric lamellae structures, which translate to an increase in the particle aspect ratio after toluene evaporation. Complete reversibility is achieved by changing to chloroform as a nonselective solvent. Moreover, surfactants can be used to tune block-selective wetting of the particle surface during the annealing; for example, a PS shell can protect the internal lamellae structure from disassembly. Overall, this versatile postassembly process enables the tailoring of the structural features of striped colloidal ellipsoids by only using commercial BCPs and solvents.

Lens-Shaped Carbon Particles with Perpendicularly-Oriented Channels for High-Performance Proton Exchange Membrane Fuel Cells

Two-dimensional sheet-like mesoporous carbon particles are promising for maximizing the number of active sites and the mass transport efficiency of proton exchange membrane fuel cells (PEMFCs). Herein, we develop a series of lens-shaped mesoporous carbon (LMC) particles with perpendicularly oriented channels (diameter = 60 nm) and aspect ratios (ARs) varying from 2.1 to 6.2 and apply them for the fabrication of highly efficient PEMFCs. The membrane emulsification affords uniform-sized, lens-shaped block copolymer particles, which are successfully converted into the LMC particles with well-ordered vertical channels through hyper-cross-linking and carbonization steps. Then, an ultralow amount (1 wt %) of platinum (Pt) is loaded into the particles. The LMC particles with higher ARs are packed with a higher density in the cathode and are better aligned on the cathode surface compared to the LMC particles with lower ARs. Thus, the well-ordered channels in the particles facilitate the mass transport of the reactants and products, significantly increasing the PEMFC performance. For example, the LMC particles with the AR of 6.2 show the highest initial single cell performance of 1135 mW cm^-2, and the cell exhibits high durability with 1039 mW cm^-2 even after 30 000 cycles. This cell performance surpasses that of commercial Pt/C catalysts, even at 1/20 of the Pt loading.

Structure Regulation of Block Copolymer Assemblies in Emulsion Droplets by Adding a Selective Solvent

Generally, nanostructured polymer particles are prepared by three-dimensional (3D) confined self-assembly (3D-CSA) of block copolymers (BCPs), while micelles are obtained through self-assembly of BCPs in dilute solutions. Herein, a facile yet robust strategy is developed to regulate the assembled structures of BCP, poly(styrene-block-4-vinylpyridine) (PS-b-P4VP), from nanostructured particles to micelles. The assemblies are prepared by an emulsion-solvent diffusion-induced self-assembly route, which is conducted by dialysis. A key feature of this strategy is that a P4VP-selective solvent (e.g., ethanol) is added to the dialysate to tune the interfacial behavior of the droplets and assembled structures of PS-b-P4VP. Our results reveal that in the presence of slight ethanol, the surface and internal structural transitions of nanostructured particles are caused by changes in the interfacial selectivity and packing parameter. Interestingly, interfacial instability, which results in the formation of micelles, is observed when the dialysate contains 50 vol.% ethanol or more. The reason can be ascribed to the decreased interface tension, which is induced by the increase in ethanol and enhanced solubility of P4VP. This facile strategy provides a new opportunity to bridge the gap between traditional 3D-CSA and solution self-assembly of BCPs, offering a promising route to engineer morphologies and nanostructures of polymeric assemblies. This article is protected by copyright. All rights reserved.

Poly(vinylpyridine)-Containing Block Copolymers for Smart, Multicompartment Particles

Multicompartment particles generated by the self-assembly of block copolymers (BCPs) have received considerable attention due to their unique morphologies and functionalities. A class of important building blocks for multicomponent particles...

Spiral- and meridian-patterned spheres self-assembled from block copolymer/homopolymer binary systems

Spiral nanostructures, mainly in the 2D form, have been observed in polymer self-assembly, while well-defined 3D spirals are rarely reported. Here we report that a binary system containing polypeptide-based block copolymers and homopolymers can self-assemble into well-defined spiral spheres (3D spirals), in which the homopolymers form the core and the copolymers form the spirals. Upon increasing the preparation temperature, meridian spheres were obtained. Mixing polypeptide block copolymers with opposite backbone chirality also leads to the formation of meridian spheres. In the meridian patterns, a tighter packing manner of the phenyl groups appended to the polypeptide blocks was observed, which is responsible for the spiral-to-meridian transitions. This work enriches the research of spiral assemblies and provides a facile route to switch chiral/achiral nanostructures by regulating the packing manner of the pendant groups.

Photoswitchable Surfactant-Driven Reversible Shape- and Color-Changing Block Copolymer Particles

Polymer particles that switch their shape and color in response to light are of great interest for the development of programmable smart materials. Herein, we report block copolymer (BCP) particles with reversible shapes and colors activated by irradiation with ultraviolet (UV) and visible lights. This shape transformation of the BCP particles is achieved by a spiropyran-dodecyltrimethylammoium bromide (SP-DTAB) surfactant that changes its amphiphilicity upon photoisomerization. Under UV light (365 nm) irradiation, the hydrophilic ring-opened merocyanine form of the SP-DTAB surfactant affords the formation of spherical, onion-like BCP particles. In contrast, when exposed to visible light, surfactants with the ring-closed form yield prolate or oblate BCP ellipsoids with axially stacked nanostructures. Importantly, the change in BCP particle morphology between spheres and ellipsoids is reversible over multiple UV and visible light irradiation cycles. In addition, the shape- and color-switchable BCP particles are integrated to form a composite hydrogel, demonstrating their potential as high-resolution displays with reversible patterning capabilities.

Light-Enabled Reversible Shape Transformation of Block Copolymer Particles

Confined self-assembly of block copolymers (BCPs) is effective to manipulate various shapes of particles. In emulsion confined self-assembly, reversibly light-trigged switchable BCP particles are extremely expected, yet rarely reported. Herein, a novel strategy is developed to realize reversibly light-responsive shape-transformation of BCP particles by constructing functional surfactants with light-active azobenzene (azo) groups in the confined self-assembly of BCPs within emulsion droplet. Ultraviolet and visible lights can reversibly modulate the amphiphilicity and interfacial affinity of the surfactants to different blocks, triggering the reversible microphase structure transformation of BCP particles with high temporal-spatial resolution. We can realize shape and morphological transitions of BCP particles from onion-shaped spherical particles to striped ellipsoids and, ultimately, to inverse onion-like particles by ultraviolet irradiation. More importantly, this shape transformation is reversible by the irradiation of visible light, attributed to the reversible trans-cis isomerization of azo groups. We also demonstrate that the light-triggered shape transformation of BCP particles can be employed in a controllable drug release through a noncontacted and programmed manner, showing promising potential in clinic and biomedicine.

Halogen-Bond Mediated 3D Confined Assembly of AB Diblock Copolymer and C Homopolymer Blends

Halogen-bond driven assembly, a world parallel to hydrogen-bond, has emerged as an attractive tool for constructing (macro)molecular arrangement. However, knowledge about halogen-bond mediated confined-assembly in emulsion droplets is limited so far. An I^…. N bond mediated confined-assembly pathway to enable order-order phase transitions is reported here. Compared to hydrogen bonds, the distinct features of halogen bonds (e.g., higher directionality, hydrophobicity, favored in polar solvents), offers opportunities to achieve novel nanostructures and materials. Polystyrene-b-poly(4-vinyl pyridine) (PS-b-P4VP) AB diblock copolymer is chosen as halogen acceptor, while an iodotetrafluorophenoxy substituted C-type homopolymer, (poly(3-(2,3,5,6-tetrafluoro-4-iodophenoxy)propyl acrylate), PTFIPA) is designed as halogen donor, synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization. Formation of halogen bonding donor-acceptor pairs between the PTFIPA homopolymer and the P4VP segments presented in PS-b-P4VP, increase the volume of P4VP domains, in turn inducing an order-to-order morphology transition sequence: changing from spherical → cylindrical → lamellar → inverse cylindrical, by tuning the PTFIPA content and choice of surfactant. Subsequent selective swelling/deswelling of the P4VP domains give rise to further internal morphology transitions, creating tailored mesoporous microparticles, disassembled nanodiscs, and superaggregates. It is believed that these results will stimulate further examinations of halogen bonding interactions in emulsion droplets and many areas of application.

Frustrated Microparticle Morphologies of a Semicrystalline Triblock Terpolymer in 3D Soft Confinement

Self-assembly of block copolymers (BCPs) in three-dimensional (3D) confinement of emulsion droplets has emerged as a versatile route for the formation of functional micro- and nanoparticles. While the self-assembly of amorphous coil-coil BCPs is fairly well documented, less is known about the behavior of crystalline-coil BCPs. Here, we demonstrate that confining a linear ABC triblock terpolymer with a crystallizable middle block in oil-in-water (O/W) emulsions results in a range of microparticles with frustrated inner structure originating from the conflict between crystallization and curved interfaces. Polystyrene-block-polyethylene-block-poly(methyl methacrylate) (PS-b-PE-b-PMMA, S₃₂E₃₆M₃₂⁹³) in toluene droplets was subjected to different preparation protocols. If evaporation was performed well above the bulk crystallization temperature of the PE block (T_evap > T_c), S₃₂E₃₆M₃₂⁹³ first microphase-separated into microparticles with lamella morphology followed by crystallization into a variety of frustrated morphologies (e.g., bud-like, double staircase, spherocone). By evaporating at significantly lower temperatures that allow the PE block to crystallize from solution (T_evap < T_c), S₃₂E₃₆M₃₂⁹³ underwent crystallization-driven self-assembly into patchy crystalline-core micelles, followed by confinement assembly into lenticular microparticles with compartmentalized hexagonal cylinder lattices. The frequency of these frustrated morphologies depends on polymer concentration and the evaporation protocol. These results provide a preliminary understanding of the morphological behavior of semicrystalline block copolymers in 3D soft confinement and may provide alternative routes to structure multicompartment microparticles from a broader range of polymer properties.

Shaping Block Copolymer Microparticles by pH-Responsive Core-Cross-Linked Polymeric Nanoparticles

Block copolymer microparticles with controllable morphology have drawn widespread attention owing to their promising applications in photonic materials, energy storage, and other areas. Hence, it is highly desired to achieve a controllable transformation of microparticle morphology. In this work, we report a simple method to shape the morphology of polystyrene-block-poly(dimethylsiloxane) (PS-b-PDMS) microparticles, by employing core-cross-linked polymeric nanoparticles (CNPs) as cosurfactants which are synthesized through cross-linking P4VP segment of PS-block-poly(4-vinylpyridine) (PS-b-P4VP). The addition of pH-responsive CNPs makes the shape of pH-inert PS-b-PDMS microparticles sensitive to pH value. The PS-b-PDMS microparticles transformed from elongated Janus pupa-like particles to onion-like particles by decreasing the pH value of the aqueous phase. The deformation mechanism is investigated by changing pH value, the weight fraction of CNPs, and surfactant property. This study provides a facile strategy to deform microparticles of pH-inert BCPs by tuning pH value, which is anticipated to be applicable to other non-pH-responsive BCP microparticles.

Tailored Polymer Particles with Ordered Network Structures in Emulsion Droplets

The structural control of block copolymer (BCP) particles, which determines their properties and utilities, is quite important. Understanding the structural relationship between solution-cast samples and polymer particles in a confined space is necessary to precisely regulate the internal structure of polymer particles. Therefore, a facile method by choosing an appropriate selective solvent is reported to prepare spherical polymer particles with ordered network structures. The rod-coil BCP, poly(dimethylsiloxane)-b-poly{2,5-bis[(4-methoxyphenyl)-oxycarbonyl]styrene} (PDMS-b-PMPCS), was chosen as a model polymer because of its strong phase segregation ability. First, the structures of the BCP with a thermodynamically stable lamellar structure cast from different selective solvents were systematically studied. Then, a polymer particle with the same internal structure as that of the solution-cast sample can be easily prepared by self-assembling in an emulsion confined space. The relatively large particle size is of importance in this process because the large value of the particle size to periodicity ratio can provide a weak confined environment. This method helps us understand the inherent self-assembling mechanism of polymer particles in an emulsion confined space and accurately control the internal structure of the polymer particle obtained.

Transformable Colloidal Polymer Particles with Ordered Internal Structures

Based on studies combining experiments and simulations, internally ordered colloidal particles that are able to undergo morphological transformations both in shape and internal structure are presented. The particles are prepared by emulsion solvent evaporation-induced 3D soft confined assembly of di-block copolymer polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP). Control over the solvent selectivity leads to a dramatic change in shape and internal structure for particles. Pupa-like particles of lamellar morphology are obtained when using a non-selective solvent, while patchy particles possessing a plum pudding structure formed when the solvent is selective for PS-block. More interestingly, 3D soft confined annealing drives order-order morphological transformation of the particles. The morphology of reshaped particles can be well controlled by varying the solvent selectivity, annealing time, and interfacial interaction. The experimental results can be explained based on simulations. This study can offer considerable scope for the design of new stimuli-responsive colloidal particles for potential applications in photonic crystal, drug delivery and release, sensor and smart coating, etc.

Open and Closed Layered Nanostructures with Sub-10 nm Periodicity Self-Assembled from Hydrophilic [60]Fullerene-Based Giant Surfactants

Giant surfactants have been identified as good candidates to produce sub-10 nm elaborate nanostructures, which could potentially realize complex functions in nanofabrication fields. Our theoretical simulation demonstrates the formation of open layered (pupa-like micelles) and closed layered (onion-like micelles) nanostructures, self-assembled from giant surfactants with comparably sized hydrophilic heads tethered by oligomers in solution. Directed by these simulation results, we synthesized giant surfactants consisting of hydrophilic [60]fullerene heads and oligostyrene (OS₇) tails and produced the predicted nanostructures with periods of 9.5, 8.3, and 7.5 nm, experimentally. Adjusting the polarity of the solvent and corresponding concentration changed the nanostructures from onion-like micelles with closed layers to pupa-like micelles with open layers. The different morphologies and periods were caused by solvent inclusion and the overlap of OS chains. The above layered nanostructures remained stable after annealing at 120 °C. This work provides insights that computer simulation can play an important role in assisting the design and construction of complicated nanostructures in giant surfactant systems.

Interfacial Instability of Emulsion Droplets Containing a Polymer and a Fatty Alcohol

We investigated the interfacial instability of emulsion droplets via in situ measuring the oil/water interfacial tension (IFT) using the capillary suction method. The discrete phase of the oil-in-water emulsion contains a hydrophobic polymer (polystyrene, PS) and a fatty alcohol cosurfactant n-cetyl alcohol (CA) or n-octadecanol (OD), both of which were dissolved in an organic solvent (chloroform). The continuous phase is an aqueous solution of surfactant (sodium dodecyl sulfate, SDS). Upon removal of the organic solvent, the concentrations of CA and PS increase gradually, which induce a continual decrease of the IFT until the occurrence of interfacial instability. Micropipette tensiometry performed on an evaporating emulsion droplet reveals that interfacial instability is triggered when the IFT decreases close to ∼0.17 mN/m. As a result, micron particles with wrinkled surfaces can be obtained after the complete removal of the organic solvent. The effect of the initial concentration and alkyl chain length of the cosurfactant on the interfacial instability and surface roughness of the formed particles was studied. This study provides theoretical guidance for the preparation of micrometer-sized polymer particles with diverse morphologies via the interfacial instability of emulsion droplets.

100th Anniversary of Macromolecular Science Viewpoint: Block Copolymer Particles: Tuning Shape, Interfaces, and Morphology

Confined assembly of block copolymers (BCPs) is receiving increasing attention due to the ability to create unconventional morphologies that cannot be observed in the corresponding bulk systems. This effect is further driven by the simplicity and versatility of these procedures for controlling the shape of particles prepared by 3D soft confinement of BCPs in emulsions. By taking advantage of a mobile emulsion interface, the one-step formation of nonspherical BCP particles through spontaneous deformation is possible with design principles and theoretical models for controlling shape/nanostructure now being established. This Viewpoint highlights strategies for shape tuning of BCP particles, currently accessible shapes, their controllability, and potential application. The emergence of 3D soft confinement of BCPs and related theory is overviewed with a focus on current strategies, types of nonspherical shapes achieved, and structure-property relationships for nonspherical BCP particles. Finally, the applications and future perspectives for these materials are discussed.

Multicompartment Microparticles with Patchy Topography through Solvent-Adsorption Annealing

We report on the evaporation-induced confinement assembly (EICA) of polystyrene-b-polybutadiene-b-poly(methyl methacrylate) (PS-b-PB-b-PMMA, SBM) triblock terpolymers into multicompartment microparticles and follow their morphological evolution during solvent-adsorption annealing. We initially obtain elliptic microparticles with axially stacked PS/PB/PMMA morphology using cetyltrimethylammonium bromide (CTAB) as surfactant. Exchanging the surfactant to poly(vinyl alcohol) (PVA) during solvent vapor annealing with chloroform (CHCl₃), PMMA preferentially interacts with the interface, and microparticles change their shape into spheres with concentric morphology. Surprisingly, this transformation initiates at both poles of the microparticles simultaneously and then proceeds toward the equator, resulting in particles with inner morphology and patchy topography. We observed this evolution for different PB fractions, suggesting the mechanism to be more general and the EICA process to be a suitable method to generate patchy particle surfaces.

Nonspherical Nanoparticle Shape Stability Is Affected by Complex Manufacturing Aspects: Its Implications for Drug Delivery and Targeting

The shape of nanoparticles is known recently as an important design parameter influencing considerably the fate of nanoparticles with and in biological systems. Several manufacturing techniques to generate nonspherical nanoparticles as well as studies on in vitro and in vivo effects thereof have been described. However, nonspherical nanoparticle shape stability in physiological-related conditions and the impact of formulation parameters on nonspherical nanoparticle resistance still need to be investigated. To address these issues, different nanoparticle fabrication methods using biodegradable polymers are explored to produce nonspherical nanoparticles via the prevailing film-stretching method. In addition, systematic comparisons to other nanoparticle systems prepared by different manufacturing techniques and less biodegradable materials (but still commonly utilized for drug delivery and targeting) are conducted. The study evinces that the strong interplay from multiple nanoparticle properties (i.e., internal structure, Young's modulus, surface roughness, liquefaction temperature [glass transition (T_g ) or melting (T_m )], porosity, and surface hydrophobicity) is present. It is not possible to predict the nonsphericity longevity by merely one or two factor(s). The most influential features in preserving the nonsphericity of nanoparticles are existence of internal structure and low surface hydrophobicity (i.e., surface-free energy (SFE) > ≈55 mN m^-1 , material-water interfacial tension <6 mN m^-1 ), especially if the nanoparticles are soft (<1 GPa), rough (R_rms > 10 nm), porous (>1 m² g^-1 ), and in possession of low bulk liquefaction temperature (<100 °C). Interestingly, low surface hydrophobicity of nanoparticles can be obtained indirectly by the significant presence of residual stabilizers. Therefore, it is strongly suggested that nonsphericity of particle systems is highly dependent on surface chemistry but cannot be appraised separately from other factors. These results and reviews allot valuable guidelines for the design and manufacturing of nonspherical nanoparticles having adequate shape stability, thereby appropriate with their usage purposes. Furthermore, they can assist in understanding and explaining the possible mechanisms of nonspherical nanoparticles effectivity loss and distinctive material behavior at the nanoscale.

Formation Mechanisms of Porous Particles from Self-Assembly of Amphiphilic Diblock Copolymers inside an Oil-in-Water Emulsion Droplet upon Solvent Evaporation

The formation mechanisms of porous particles from self-assembly of amphiphilic diblock copolymers inside an oil-in-water emulsion droplet upon evaporation of the organic solvent are investigated based on Monte Carlo simulations for the first time. A morphological diagram of particles is constructed as a function of the surfactant concentration (φ) and the copolymer composition characterized by the volume fraction of the hydrophilic B block ( f_B). Particles with various morphologies are predicted. Morphological sequences from non-porosity to closed-porosity to capsules and finally to open-porosity particles are usually observed with increasing φ when f_B ≤ 1/2, with the only exception that capsules do not occur when f_B = 1/6. Furthermore, the critical φ value for a given morphological transition usually decreases with increasing f_B. Micelles are always observed at higher φ regions when f_B > 1/2. It is found that the specific surface area falls on almost the same regime for particles with the same kind of morphology, indicating that the morphology of a particle largely determines its specific surface area. The chain stretching varies with the particle morphology. It is the presence of the surfactant that makes the formation of porous particles possible, while when φ > 0, multiple morphological transitions can be induced by changing f_B. In the process of organic solvent removal, the value of f_B may affect the shape of pores inside the droplet and hence leads to the f_B dependence of the morphological sequences. When the solvent evaporation is not too fast, the resulting morphological sequence does not depend on the evaporation rate. Our results are compared with related experiments.

Shape and Color Switchable Block Copolymer Particles by Temperature and pH Dual Responses

Herein, we report a simple and robust strategy for preparing dual-responsive shape-switchable block copolymer (BCP) particles, which respond to subtle temperature and pH changes near physiological conditions (i.e., human body temperature and neutral pH). The shape transition of polystyrene- b-poly(4-vinylpyridine) BCP particles between lens and football shapes occurs in very narrow temperature and pH ranges: no temperature-based transition for pH 6.0, 40-50 °C transition for pH 6.5, and 25-35 °C for pH 7.0. To achieve these shape transitions, temperature/pH-responsive polymer surfactants of poly( N-(2-(diethylamino)ethyl)acrylamide- r- N-isopropylacrylamide) are designed to induce dramatic changes in relative solubility and their location in response to temperature and pH changes near physiological conditions. In addition, the BCP particles exhibit reversible shape-transforming behavior according to orthogonal temperature and pH changes. Colorimetric measurements of temperature and pH changes are enabled by shape-transforming properties combined with selective positioning of dyes, suggesting promising potential for these particles in clinical and biomedical applications.

Shape-Anisotropic Diblock Copolymer Particles with Varied Internal Structures

Anisotropic polymer particles have promising applications in various fields, whereas their preparation usually suffers from tedious procedures. Here, we introduce a facile strategy to fabricate novel shape-anisotropic particles with varied internal structures via self-assembly of block copolymers (BCPs), with perfluorooctane (PFO) as the liquid template in emulsion droplets. By increasing the volume ratio of PFO to polystyrene- block-poly(4-vinylpyridine) (PS- b-P4VP) or decreasing the initial concentration of the BCPs, the self-assembled polymer particles change from spherical core-shell structures to anisotropic particles. Moreover, the anisotropic shape and internal structure of the polymer particles, including cone-like particles with alternative PS and P4VP lamellas, crescent-shaped particles with cylindrical P4VP domains, and plate-like particles with spherical P4VP domains, can be obtained by changing the block ratio or molecular weight or by adding a hydrogen-bonding agent. Based on the in situ optical microscopy investigation of the morphology evolution of the emulsion droplet, we conclude that both kinetic and thermodynamic factors during emulsion evolution determine the formation of shape-anisotropic polymeric particles with controllable internal structures.