Rheology of Poly(N-isopropylacrylamide)–Clay Nanocomposite Hydrogels

A molecular dynamics study on adsorption mechanisms of polar, cationic, and anionic polymers on montmorillonite

Adsorption of polymers on clay in aqueous solutions has wide applications in environmental, medical, and energy-related areas, but the interactions between polymers and clay under varied conditions are still not fully understood. In this study, we investigated the adsorption mechanisms of four polymers belonging to different categories, namely anionic poly(acrylic acid) (poly-AA), cationic poly(diallyldimethylammonium chloride) (poly-DADMAC), nonionic polyacrylamide (poly-AM), and the copolymer of AA and DADMAC (poly-AADADMAC). By using molecular dynamics simulations, we compared the desorption kinetics of these polymers at different temperatures and found that poly-AA and poly-AM have the weakest and strongest adsorption abilities, respectively. Polymer adsorptions are slightly more stable at higher pressures, and high salinity favors the adsorption of charged polymers. Further analysis suggests that the adsorption of anionic poly-AA is less stable than that of cationic poly-DADMAC because the latter is attracted to the negatively charged surface by direct coulombic forces, and poly-AM is stabilized by van der Waals forces and hydrogen bonds. This study provides insights on how to enhance the adsorption affinity of polymers on a clay surface and may help the design or improvement of polymer/clay nanocomposite materials.

Mucoadhesive and Rheological Studies on the Co-Hydrogel Systems of Poly(Ethylene Glycol) Copolymers with Fluoroalkyl and Poly(Acrylic Acid)

A self-assembled co-hydrogel system with sol-gel two-phase coexistence and mucoadhesive properties was developed based on the combined properties of fluoroalkyl double-ended poly(ethylene glycol) (R_f-PEG-R_f) and poly(acrylic acid) (PAA), respectively. We have synthesized an R_f-PEG-g-PAA (where g denotes grafted) copolymer and integrated it into the R_f-PEG-R_f physically cross-linked micellar network to form a co-hydrogel system. Tensile strengths between the co-hydrogel surfaces and two different sets of mucosal surfaces were acquired. One mucosal surface was made of porcine stomach mucin Type II, while the other one is a pig small intestine. The experimental results show that the largest maximum detachment stresses (MDSs) were obtained when the R_f-PEG-g-PAA’s weight percent in the dehydrated polymer mixture is ~15%. Tensile experiments also found that MDSs are greater in acidic conditions (pH = 4–5) (123.3 g/cm² for the artificial mucus, and 43.0 g/cm² for pig small intestine) and basic conditions (pH = 10.6) (126.9 g/cm², and 44.6 g.cm², respectively) than in neutral pH (45.4 g/cm², and 30.7 g.cm², respectively). Results of the rheological analyses using shear strain amplitude sweep and frequency sweep reveal that the R_f-PEG-g-PAA was physically integrated into the R_f-PEG-R_f micellar network, and the co-hydrogels remain physically cross-linked in three-dimensional micellar networks with long-term physical dispersion stability. Therefore, the co-hydrogel system is promising for drug delivery applications on mucosal surfaces.

Conductive Self-Healing Nanocomposite Hydrogel Skin Sensors with Antifreezing and Thermoresponsive Properties

With growing interest in flexible and wearable devices, the demand for nature-inspired soft smart materials, especially intelligent hydrogels with multiple perceptions toward external strain and temperatures to mimic the human skin, is on the rise. However, simultaneous achievement of intelligent hydrogels with skin-compatible performances, including good transparency, appropriate mechanical properties, autonomous self-healing ability, multiple mechanical/thermoresponsiveness, and retaining flexibility at subzero temperatures, is still challenging and thus limits their application as skinlike devices. Here, conductive nanocomposite hydrogels (NC gels) were delicately designed and prepared via gelation of oligo(ethylene glycol) methacrylate (OEGMA)-based monomers in a glycerol-water cosolvent, where inorganic clay served as the physical cross-linker and provided conductive ions. The resultant NC gels exhibited good conductivity (∼3.32 × 10^-4 S cm^-1, akin to biological muscle tissue) and an autonomously self-healing capacity (healing efficiency reached 84.8%). Additionally, such NC gels displayed excellent flexibility and responded well to multiple strain/temperature external stimuli and subtle human motions in a wide temperature range (from -20 to 45 °C). These distinguished properties would endow such NC gels significant applications in fields of biosensors, human-machine interfaces, and soft robotics.

One-Pot Synthesis and Rheological Study of Cationic Poly (3-acrylamidopropyltrimethyl ammoniumchloride) P(APTMACl) Polymer Hydrogels

The main objective of this research work is to explore the complete and extensive rheological studies of cationic poly (3-acrylamidopropyl trimethyl ammonium chloride) P(APTMACl) hydrogel, prepared by free radical polymerization method at room temperature. Hydrogel was characterized by various techniques such as SEM, FTIR and TGA, whereas rheological properties of synthesized hydrogel were obtained using frequency sweep and frequency curve analysis in different temperature range. Storage modulus (G′) and loss modulus (G′′) were investigated as a function of angular frequencies and shear stress at various temperatures. Rheological models like Bingham plastic model, modified Bingham and Ostwald power law were applied to understand the rheological performance of the gels. Flow curves obtained at different temperatures indicate that P(APTMACl) hydrogel shows a non-Newtonian pseudo plastic behavior. All results concluded that rheology is a powerful tool to study the complete visco-elastic behavior of polymer hydrogel for multiple applications.

Molecular simulation of structures and mechanical properties of nanocomposite networks consisting of disk-shaped particles and polymers

We study the structures and the mechanical properties of nanocomposite networks consisting of disk-shaped particles and polymers by a coarse-grained molecular dynamics simulation. The disk-shaped particles and the polymers form tightly cross-linked network structures by the polymer adsorption on the disk-shaped particles and show high mechanical strength. We confirm the significance of the high polymerization degree for the large fracture elongations. Under the uniaxial elongation, at low elongation ratios, the networks maintain the cross-linked structures and indicate the sharp increase of the stress with the elongation. At large elongation ratios, the number of bridge chains decreases by the peeling of the adsorbed polymers from the disk-shaped particles. The decline of the bridge chains suppresses the increment of the stress. The orientation of the disk-shaped particles saturates prior to that of the polymers because of the slow orientation of the non-bridge chains. These results are consistent with reported experimental results.

Hydrogel Nanocomposites with Independently Tunable Rheology and Mechanics

Hydrogels are an attractive class of biomaterials for minimally invasive local drug delivery given their injectability, tunability, high water content, and biocompatibility. Broad applicability though is challenged: relatively modest mechanical properties restrict use to soft tissues, while flow properties necessary for injectability limit implantation to dried, enclosed tissues to minimize material migration during gelation. To address these dual concerns, we designed an injectable nanocomposite hydrogel based on dextran aldehyde and a poly(amido amine) dendrimer doped with phyllosilicate nanoplatelet fillers. Balance of components allows for exfoliation of nanoplatelets, significantly changing macromer solution flow, facilitating injection and manipulation in a wide variety of implantation contexts while enhancing compressive modulus of hydrogels at low loading. Importantly, rheological and mechanical effects were dependent on aspect ratio, with high aspect ratio nanoplatelets having much stronger effects on mechanics and low aspect ratio nanoplatelets having stronger effects on rheology, enabling nearly independent control of rheological and mechanical properties. Nanoplatelets enhanced hydrogel properties at a filler loading substantially lower than that of comparably sized nanoparticles. We present a model to explain the role that aspect ratio plays in control of rheology and mechanics in nanoplatelet-containing hydrogels, with lessons for further nanocomposite hydrogel development. This low-cost biocompatible material may be useful as a drug delivery platform in challenging implantation environments.

Structure formation in nanocomposite hydrogels

We use molecular dynamics simulations to study structure formation in physically associating nanocomposite hydrogels. Nanofillers were modeled as rigid bodies of disk-like shapes and physical crosslinks were simulated by introducing a short-range attraction between the nanofillers and polymer chain ends. The structure, dynamics and mechanics of these polymer gels were studied as a function of nanofiller volume fraction. We observe the formation of a percolated network in the hydrogels, with an ordered local structure but disordered globally, as we increase the filler fraction. This locally ordered structure was a result of the anisotropy of the disk-like fillers. The dynamics of polymers showed significant caging effects in the gel state. Stress autocorrelation and elongation results were analyzed as a function of nano-filler concentrations. Comparisons with nanofillers of different shapes showed that disk-like nanofillers are more effective in strengthening the hydrogels than spherical nanofillers.

Sea Cucumber-Inspired Autolytic Hydrogels Exhibiting Tunable High Mechanical Performances, Repairability, and Reusability

Inspired by stimuli-responsive remarkable changes in consistency (hardening, softening, autolysis) of sea cucumbers, we synthesized a supramolecular polymer(SP) hydrogel directly by photoinitiated aqueous polymerization of N-acryloyl 2-glycine monomer bearing one amide and one carboxyl group on the side chain. The SP hydrogels doped with Ca(2+) demonstrated excellent mechanical properties-high tensile strength (∼1.3 MPa), large stretchability (up to 2300%), high compressive strength (∼10.8 MPa), and good toughness (∼1000 J m(-2)) due to cooperative hydrogen bonding interactions from amide and carboxyl together with Ca(2+) cross-linking. Responding to the change in pH and Ca(2+) concentration, the hydrogels could modulate their network stability and mechanical properties: at pH3.0 and higher Ca(2+) content, the hydrogel formed low swelling network which was stiff and stable; in alkaline or neutral buffer with lower content of or without Ca(2+), the hydrogel formed a highly swollen transient network, which was soft and eventually autolyzed. The reversible multiple noncovalent bonds enabled the hydrogels to achieve thermoplasticity, self-healability, and reusability. Notably, distinct formulations of hydrogels could be welded together under heating to form a gradient hydrogel. In vitro cytotoxicity assay and subcutaneous implantation indicated that the SP hydrogels were biocompatible and autolytic in vivo. The SP hydrogels may find applications as temporary biodevices for intestinal drug delivery or for injectable filling in assisting suturing small vessels.

UV-triggered thiol–disulfide exchange reaction towards tailored biodegradable hydrogels

Biodegradable hydrogels were constructed by a UV-triggered thiol–disulfide exchange reaction with temporal and spatial precision.

Functional liquid crystalline gels through multi-scale hierarchical self-assembly of LAPONITE® and amidodiol

Energy storage devices accomplished with efficient LAPONITE® liquid crystalline gel electrolytes.