Grafting Monodisperse Polymer Chains from Concave Surfaces of Ordered Mesoporous Silicas

Recent developments in visible light induced polymerization towards its application to nanopores

Visible light induced polymerizations are a strongly emerging field in recent years. Besides the often mild reaction conditions, visible light offers advantages of spatial and temporal control over chain growth, which makes visible light ideal for functionalization of surfaces and more specifically of nanoscale pores. Current challenges in nanopore functionalization include, in particular, local and highly controlled polymer functionalizations. Using spatially limited light sources such as lasers or near field modes for light-induced polymer functionalization is envisioned to allow local functionalization of nanopores and thereby improve nanoporous material performance. These light sources are usually providing visible light while classical photopolymerizations are mostly based on UV-irradiation. In this review, we highlight developments in visible light induced polymerizations and especially in visible light induced controlled polymerizations as well as their potential for nanopore functionalization. Existing examples of visible light induced polymerizations in nanopores are emphasized.

A Comparative Study of PMETAC-Modified Mesoporous Silica and Titania Thin Films for Molecular Transport Manipulation

The manipulation and understanding of molecular transport across functionalized nanopores will take us closer to mimicking biological membranes and thus to design high-performance permselective separation systems. In this work, Surface-initiated atom transfer radical polymerization (SI-ATRP) of (2-methacryloyloxy)-ethyltrimethylammonium chloride (METAC) was performed on both mesoporous silica and mesoporous titania thin films. Pores were proven to be filled using ellipsometry and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Furthermore, the employed method leads to a polymer overlayer, whose thickness could be discriminated using a double-layer ellipsometry model. Cyclic voltammetry experiments reveal that the transport of electrochemically active probes is affected by the PMETAC presence, both due to the polymer overlayer and the confined charge of the pore-tethered PMETAC. A more detailed study demonstrates that ion permeability depends on the combined role of the inorganic scaffolds' (titania and silica) surface chemistry and the steric and charge exclusion properties of the polyelectrolyte. Interestingly, highly charged negative walls with positively charged polymers may resemble zwitterionic polymer behavior in confined environments.

Visible light induced RAFT for asymmetric functionalization of silica mesopores

One key feature for bioinspired transport design through nanoscale pores is nanolocal, asymmetric as well as multifunctional nanopore functionalization. Here, we use a visible-light induced, controlled photo electron/energy transfer-reversible addition-fragmentation chain-transfer (PET-RAFT) polymerization for asymmetric polymer placement into mesoporous silica thin films including asymmetric polymer sequence design.

Pushing the limits of nanopore transport performance by polymer functionalization

Inspired by the design and performance of biological pores, polymer functionalization of nanopores has emerged as an evolving field to advance transport performance within the last few years. This feature article outlines developments in nanopore functionalization and the resulting transport performance including gating based on electrostatic interaction, wettability and ligand binding, gradual transport controlled by polymerization as well as functionalization-based asymmetric nanopore and nanoporous material design going towards the transport direction. Pushing the limits of nanopore transport performance and thus reducing the performance gap between biological and technological pores is strongly related to advances in polymerization chemistry and their translation into nanopore functionalization. Thereby, the effect of the spatial confinement has to be considered for polymer functionalization as well as for transport regulation, and mechanistic understanding is strongly increased by combining experiment and theory. A full mechanistic understanding together with highly precise nanopore structure design and polymer functionalization is not only expected to improve existing application of nanoporous materials but also opens the door to new technologies. The latter might include out of equilibrium devices, ionic circuits, or machine learning based sensors.

Effect of Dispersity on the Conformation of Spherical Polymer Brushes

We show that dispersity (D̵) markedly alters the conformation of spherical polymer brushes. The average lengths (l_b) of poly(tert-butyl acrylate) (PtBA) brushes of varying D̵ grafted to nanoparticles were measured using dynamic light scattering. In the semidilute polymer brush (SDPB) regime, the l_b of PtBA and polymers from earlier studies of various D̵ could be cleanly collapsed onto a master curve as a function of the scaling variable N_wσ^1/3, where N_w is the weight-average degree of polymerization and σ is the grafting density. In the concentrated polymer brush (CPB) regime, however, l_b collapsed onto a bifurcated curve as a function of the scaling variable N_wσ^1/2, indicating D̵ more strongly affects the average length of brushes with low N_wσ^1/2. We propose that the stretching of the stem near the particle surface due to interchain interactions in the CPB regime leads to greater l_b in broad dispersity brushes of low but not high N_wσ^1/2.

Copolymerization of Mesoporous Styrene-Bridged Organosilica Nanoparticles with Functional Monomers for the Stimuli-Responsive Remediation of Water

For every mass product, there are problems associated with the resulting waste. Residues of hormones in urine cannot be removed sufficiently from wastewater, and this has undesired consequences. An ideal adsorbent would take up the impurity, enable a simple separation and recyclability. Polymer colloids with high affinity towards the drug, accessible porosity, high surface area, and stimuli-responsive properties would be candidates, but such a complex system does not exist. Here, porous vinyl-functionalized organosilica nanoparticles prepared from a styrene bridged sol-gel precursor act as monomers. Initiation of the polymerization at the pore walls and addition of functional monomers result in a special copolymer, which is covalently linked to the surface and covers it. An orthogonal modification of external surface was done by click attachment of a thermoresponsive polymer. The final core-shell system is able to remove quantitatively hydrophobic molecules such as the hormone progesterone from water. A change of temperature closes the pores and induces the aggregation of the particles. After separation one can reopen the particles and recycle them.

Surface-grafted polyacrylonitrile brushes with aggregation-induced emission properties

Polyacrylonitrile (PAN) brushes were grafted from silicon wafers by photoinduced ATRP and shown to exhibit aggregation-induced emission (AIE) properties.

Facile fabrication of mesostructured natural rubber/silica nanocomposites with enhanced thermal stability and hydrophobicity

Natural rubber (NR)/hexagonal mesoporous silica (HMS) nanocomposites (NRHMS) with enhanced thermal and hydrophobic properties were facilely prepared via in situ sol-gel formation with pH adjustment using a low sulphuric acid (H2SO4) acid concentration. The effect of the amount of 0.5 M H2SO4 (2.5-10 g) added into the pre-synthesis mixture on the physicochemical properties of the obtained NRHMS nanocomposites was investigated. With a small addition of H2SO4 solution, the fabricated NRHMS nanocomposite possessed an improved wormhole-like mesostructure arrangement with a thicker silica wall, which retarded the thermal decomposition of the NR phase, as deduced from the auto-oxidation of NR by thermogravimetric analysis. The H2O adsorption-desorption measurement revealed an increased hydrophobicity of the NRHMS composites, explained by the acid-catalyzed bridging of free silanol groups to siloxane bonds, which was supported by the X-ray photoelectron spectroscopy analysis. Scanning transmission electron microscopy with energy dispersive X-ray spectroscopy elemental mapping revealed a good dispersion of the NR phase within the mesostructured silica. However, a high amount of added H2SO4 solution led to silica-NR phase separation due to the decreased hydrophobic interaction between the silica precursor and rubber chain, as well as an agglomeration of the NR phase itself. The mechanism of NRHMS nanocomposite formation under pH-controlled conditions was proposed to proceed via a cooperative self-assembly route.

Polymer-Based Synthetic Routes to Carbon-Based Metal-Free Catalysts

Carbons are increasingly important as possible alternatives to expensive metal catalysts owing to the wide range of chemical properties they can exhibit and the growing set of synthetic routes available to produce them. This progress report discusses the process of making catalytic carbons from polymeric precursors, focusing on mechanisms of carbonization and how the polymer structures and synthetic procedures affect the resulting carbons. In considering what is necessary to move laboratory catalytic carbons to industrial and commercial applications, the cost and complexity to produce them are a considerable challenge to overcome. Industrially produced carbons are typically made from biopolymers such as lignin while many of the catalytic carbons studied in literature are from synthetic polymers. Thus, studying polymer-derived carbons can provide insights into the carbonization process and the properties of catalytic carbons, which can subsequently be translated to improve biopolymer-derived carbons in an economical way. Aspects of polymer carbonization discussed include carbonization mechanisms, effects of crosslinkers, polymer microstructure, heteroatom control, and effects of nanostructuring.

Advanced Materials by Atom Transfer Radical Polymerization

Atom transfer radical polymerization (ATRP) has been successfully employed for the preparation of various advanced materials with controlled architecture. New catalysts with strongly enhanced activity permit more environmentally benign ATRP procedures using ppm levels of catalyst. Precise control over polymer composition, topology, and incorporation of site specific functionality enables synthesis of well-defined gradient, block, comb copolymers, polymers with (hyper)branched structures including stars, densely grafted molecular brushes or networks, as well as inorganic-organic hybrid materials and bioconjugates. Examples of specific applications of functional materials include thermoplastic elastomers, nanostructured carbons, surfactants, dispersants, functionalized surfaces, and biorelated materials.

Well-defined functional mesoporous silica/polymer hybrids prepared by an ICAR ATRP technique integrated with bio-inspired polydopamine chemistry for lithium isotope separation

Mesoporous silica/polymer hybrids with well-preserved mesoporosity were prepared by integrating the initiators for continuous activator regeneration (ICAR) atom transfer radical polymerization (ATRP) technique with the bio-inspired polydopamine (PDA) chemistry. By manipulating the auto-oxidative polymerization of dopamine, uniform PDA layers were deposited on the surfaces and pore walls of ordered mesoporous silicas (OMSs), thereby promoting the immobilization of ATRP initiators. Poly(glycidyl methacrylate) (PGMA) brushes were then grown from the OMSs by using the ICAR ATRP technique. The evolution of the mesoporous silica/polymer hybrids during synthesis, in terms of morphology, structure, surface and porous properties, was detailed. And, parameters influencing the controlled growth of polymer chains in the ICAR ATRP system were studied. Taking advantage of the abundant epoxy groups in the PGMA platform, post-functionalization of the mesoporous silica/polymer hybrids by the covalent attachment of macrocyclic ligands for the adsorptive separation of lithium isotopes was realized. Adsorption behavior of the functionalized hybrids toward lithium ions was fully investigated, highlighting the good selectivity, and effects of temperature, solvent and counter ions. The ability for lithium isotope separation was evaluated. A higher separation factor could be obtained in systems with softer counter anions and lower polarity solvents. More importantly, due to the versatility of the ICAR ATRP technique, combined with the non-surface specific PDA chemistry, the methodology established in this work would provide new opportunities for the preparation of advanced organic-inorganic porous hybrids for broadened applications.

The selectivity of nanoparticles for polydispersed ligand chains during the grafting-to process: a computer simulation study

By constructing a grafting-to reaction model of polydispersed polymer chains to bind onto nanoparticles (NPs), we elucidate the changes of grafting density, polydispersity index and chain length distribution of grafted ligand chains as a dependence of the feeding polymer chains.

Optimisation of Surface-Initiated Photoiniferter-Mediated Polymerisation under Confinement, and the Formation of Block Copolymers in Mesoporous Films

Nature as the ultimate inspiration can direct, gate, and selectively transport species across channels to fulfil a specific targeted function. Harnessing such precision over local structure and functionality at the nanoscale is expected to lead to indispensable developments in synthetic channels for application in catalysis, filtration and sensing, and in drug delivery. By combining mesoporous materials with localised charge-switchable poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) brushes, precisely controlling pore filling and exploring the possibility of incorporating two different responsive polymers, we hope to approach the precision control of natural systems in the absence of an external force. Here, we report a simple one-step approach to prepare a mesoporous silica thin film with ~8 nm pores functionalised with a photoiniferter by combining sol⁻gel chemistry and evaporation-induced self-assembly (EISA). We show that surface-initiated photoiniferter-mediated polymerisation (SI-PIMP) allows the incorporation of a high polymer content up to geometrical pore blocking by the simple application of UV light in the presence of a monomer and solvent, proceeding in a controlled manner in pore sizes below 10 nm, with the potential to tune the material properties through the formation of surface-grafted block copolymers.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.

Zwitterionic polymer brush grafting on anodic aluminum oxide membranes by surface-initiated atom transfer radical polymerization

A feasible processing of zwitterionic polymer-grafted anodic aluminum oxide (AAO) membranes by surface-initiated atom transfer radical polymerization (SI-ATRP) and the geometric effect were investigated.

Grafting PMMA Brushes from α-Alumina Nanoparticles via SI-ATRP

Alumina nanoparticles are widely used as nanofillers for polymer nanocomposites. Among several different polymorphs of alumina, α-alumina has the most desirable combination of physical properties. Hence, the attachment of polymer chains to α-alumina to enhance compatibility in polymeric matrixes is an important goal. However, the chemical inertness and low concentration of surface hydroxyl groups have rendered polymer modification of α-alumina a long-standing challenge. Herein, we report that activation of α-alumina in concentrated or molten NaOH as well as in molten K2S2O7 increased polymer graft density up to 50%, thereby facilitating the synthesis of α-alumina brush particles with uniform grafting density of 0.05 nm(-2) that are readily miscible or dispersible in organic solvents or in chemically compatible polymeric hosts.

Fabrication and photoactivity of short rod-shaped mesoporous SiO2@TiO2 composites with TiO2 shell

Short rod-shaped mesoporous SiO₂@TiO₂ composites containing TiO₂ shell were prepared using short rod-shaped mesoporous SiO₂–PGMA–PEGMA as template and TBT as titanium source.

Tuning of the temperature window for unit-cell and pore-size enlargement in face-centered-cubic large-mesopore silicas templated by swollen block copolymer micelles

The unit-cell size and pore diameter as functions of temperature are investigated in the syntheses of FDU-12 silicas with face-centered cubic structure templated by Pluronic (PEO-PPO-PEO) block copolymer micelles swollen by toluene. The temperature range in which the unit-cell size and pore size strongly increase as temperature decreases is correlated with the critical micelle temperature (CMT) of the surfactant. While Pluronic F127 affords a wide range of unit-cell parameters (28-51 nm) and pore diameters (16-32 nm), it renders moderately enlarged pore sizes at 25 °C. The use of Pluronic F108 with higher CMT affords FDU-12 with very large unit-cell size (∼49 nm) and large pore diameter (27 nm) at 23 °C. Large unit-cell size (40-41 nm) and pore size (22 nm) were obtained even at 25 °C. The application of Pluronics F87 and F88 with much smaller molecular weights and higher CMTs also allows one to synthesize FDU-12 with quite large unit-cell parameters and pore sizes at room temperature. The present work demonstrates that one can judiciously select Pluronic surfactants with appropriate CMT to shift the temperature range in which the pore diameter is readily tunable.

Surface-initiated controlled radical polymerizations from silica nanoparticles, gold nanocrystals, and bionanoparticles

This review summarizes recent progress in surface-initiated controlled radical polymerizations from silica nanoparticles, gold nanocrystals, and bionanoparticles.

Polymer brush coatings regulating cell behavior: passive interfaces turn into active

Material technology platforms able to modulate the communication with cells at the interface of biomaterials are being increasingly experimented. Progress in the fabrication of supports is simultaneously introducing new surface modification strategies aimed at turning these supports from passive to active components in engineered preparations. Among these platforms, polymer brushes are arising not only as coatings determining the physical and (bio)chemical surface properties of biomaterials, but also as smart linkers between surfaces and biological cues. Their peculiar properties, especially when brushes are synthesized by "grafting-from" methods, enable closer mimicking of the complex and heterogeneous biological microenvironments. Inspired by the growing interest in this field of materials science, we summarize here the most prominent and recent advances in the synthesis of "grafted-from" polymer brush surfaces to modulate the response of adhering cells.

Macromolecular engineering by atom transfer radical polymerization

This Perspective presents recent advances in macromolecular engineering enabled by ATRP. They include the fundamental mechanistic and synthetic features of ATRP with emphasis on various catalytic/initiation systems that use parts-per-million concentrations of Cu catalysts and can be run in environmentally friendly media, e.g., water. The roles of the major components of ATRP--monomers, initiators, catalysts, and various additives--are explained, and their reactivity and structure are correlated. The effects of media and external stimuli on polymerization rates and control are presented. Some examples of precisely controlled elements of macromolecular architecture, such as chain uniformity, composition, topology, and functionality, are discussed. Syntheses of polymers with complex architecture, various hybrids, and bioconjugates are illustrated. Examples of current and forthcoming applications of ATRP are covered. Future challenges and perspectives for macromolecular engineering by ATRP are discussed.

Synthesis and characterization of novel macroporous silica-polymer-calixcrown hybrid supramolecular recognition materials for effective separation of cesium

Two novel macroporous silica-polymer-calixcrown hybrid supramolecular recognition materials, 25,27-bis(n-octyloxy)calix[4]arene-crown-6 (BnOCalix[4]C6)/SiO2-P and 25,27-bis(i-octyloxy)calix[4]arene-crown-6 (BiOCalix[4]C6)/SiO2-P were synthesized by in situ polymerization and impregnation techniques. The obtained materials were characterized by scanning electron microscope (SEM), particle size distribution, nitrogen adsorption-desorption isotherms, thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy, (29)Si solid-state NMR, and powder X-ray diffraction (XRD). The adsorption of some typical fission and non-fission products Na(I), K(I), Rb(I), Cs(I), Sr(II), Ba(II), La(III), Y(III), Pd(II), Ru(III), Zr(IV), and Mo(VI) onto BnOCalix[4]C6/SiO2-P and BiOCalix[4]C6/SiO2-P in HNO3 solution was investigated. The bleeding of the materials in HNO3 solution was evaluated by analysis of total organic carbon (TOC). BnOCalix[4]C6/SiO2-P and BiOCalix[4]C6/SiO2-P exhibited excellent adsorption ability and high selectivity for Cs(I) over all the other tested metals.