Tunable Novel Cyclopentadithiophene-Based Copolymers Containing Various Numbers of Bithiazole and Thienyl Units for Organic Photovoltaic Cell Applications

Fabrication of Alternating Copolymers Based on Cyclopentadithiophene-Benzothiadiazole Dicarboxylic Imide with Reduced Optical Band Gap: Synthesis, Optical, Electrochemical, Thermal, and Structural Properties

A series of alternating copolymers containing cyclopentadithiophene (CPDT) flanked by thienyl moieties as electron-donor units and benzothiadiazole dicarboxylic imide (BTDI) as electron-acceptor units were designed and synthesized for solar cell applications. Different solubilizing side chains, including 2-ethylhexyl chains and n-octyl chains were attached to CPDT units, whereas 3,7-dimethyloctyl chains and n-octyl chains were anchored to the BTDI moieties. The impact of these substituents on the solubilities, molecular weights, optical and electrochemical properties, and thermal and structural properties of the resulting polymers was investigated. PCPDTDTBTDI-EH, DMO was synthesized via Suzuki polymerization, whereas PCPDTDTBTDI-8, DMO, and PCPDTDTBTDI-EH, 8 were prepared through direct arylation polymerization. PCPDTDTBTDI-8, DMO has the highest number average molecular weight (Mn = 17,400 g mol-1) among all polymers prepared. The PCPDTDTBTDI-8, DMO and PCPDTDTBTDI-8, 8 which have n-octyl substituents on their CPDT units have comparable optical band gaps (Eg ~ 1.3 eV), which are around 0.1 eV lower than PCPDTDTBTDI-EH, DMO analogues that have 2-ethylhexyl substituents on their CPDT units. The polymers have their HOMO levels between -5.10 and -5.22 eV with PCPDTDTBTDI-EH, DMO having the deepest highest occupied molecular orbital (HOMO) energy level. The lowest unoccupied molecular orbital (LUMO) levels of the polymers are between -3.4 and -3.5 eV. All polymers exhibit good thermal stability with decomposition temperatures surpassing 350 °C. Powder X-ray diffraction (XRD) studies have shown that all polymers have the amorphous nature in solid state.

Nonlinear Nonacenes with a Dithienothiophene Substructure: Multifunctional Compounds that Act as Columnar Mesogens, Luminophores, π Gelators, and p-Type Semiconductors

Board-like liquid-crystalline semiconductors based on the dithieno[3,2-b;2',3'-d]thiophene (DTT) substructure were synthesized and their thermal, self-assembly, optical, and semiconducting properties investigated. These sanidic compounds, bearing eight peripheral chains, are mesomorphic and spontaneously self-assemble into columnar hexagonal mesophases (Col_hex ) over broad temperature ranges, as confirmed by polarized optical microscopy, differential scanning calorimetry, and small-angle X-ray scattering. Strong blue photoluminescence with absolute quantum yields up to 33 % were measured. These compounds also form blue-light emitting gels in various organic solvents. The fibrillar-like morphology of these gels, reminiscent of the columnar structure, and stabilized by efficient intermolecular interactions, was characterized by scanning electron microscopy. The charge carrier mobility of these π-extended mesogens was measured by time-of-flight transient photocurrent technique in the Col_hex mesophase, and showed good hole-transport performance with charge carrier mobility of 10^-3  cm²  V^-1  s^-1 .

Cs -Symmetric Triphenylamine-Linked Bisthiazole-Based Metal-Free Donor-Acceptor Organic Dye for Efficient ZnO Nanoparticles-Based Dye-Sensitized Solar Cells: Synthesis, Theoretical Studies, and Photovoltaic Properties

Herein, we have designed a metal-free donor-acceptor dye by incorporating an electron deficient bisthiazole moiety as a linker in between the electron donor triphenylamine and cyanoacetic acid acceptor. The bisthiazole-based organic dye D1 was synthesized using the Pd-catalyzed Suzuki cross-coupling and Knoevenagel condensation reactions. On the basis of the optical, electrochemical, and computational studies, dye D1 showed a better electronic interaction between the donor and acceptor moieties. As-synthesized C ₂ symmetric triphenylamine-linked bisthiazole-based organic dye D1 has four anchoring groups, which play a significant role for better adsorption on the ZnO surface along with the enhanced kinetics of photoexcited electron injection. Consequently, photovoltaic properties of the organic dye D1 has been carried out by fabricating the ZnO nanoparticles (ZnO NPs)-based solar device. We obtained the maximum incident photon-to-current conversion efficiency of about 56.20%, with a short-circuit photocurrent density (J _sc) of 13.60 mA cm^-2, which results in a power conversion efficiency (PCE) of 4.94% under AM 1.5 irradiation (100 mW cm^-2). The high PCE value is the result of proficient electron injection from E _LUMO of dye D1 to the conduction band of ZnO NPs, as suggested by the computational calculations. Electrochemical impedance spectroscopy measurement is carried out to calculate the electron lifetime and also reveals the insight to the reduced charge recombinations at the various active interfaces of the photovoltaic device.

Bithiazole: An Intriguing Electron-Deficient Building for Plastic Electronic Applications

The heterocyclic thiazole unit has been extensively used as electron-deficient building block in π-conjugated materials over the last decade. Its incorporation into organic semiconducting materials is particularly interesting due to its structural resemblance to the more commonly used thiophene building block, thus allowing the optoelectronic properties of a material to be tuned without significantly perturbing its molecular structure. Here, we discuss the structural differences between thiazole- and thiophene-based organic semiconductors, and the effects on the physical properties of the materials. An overview of thiazole-based polymers is provided, which have emerged over the past decade for organic electronic applications and it is discussed how the incorporation of thiazole has affected the device performance of organic solar cells and organic field-effect transistors. Finally, in conclusion, an outlook is presented on how thiazole-based polymers can be incorporated into all-electron deficient polymers in order to obtain high-performance acceptor polymers for use in bulk-heterojunction solar cells and as organic field-effect transistors. Computational methods are used to discuss some newly designed acceptor building blocks that have the potential to be polymerized with a fused bithiazole moiety, hence propelling the advancement of air-stable n-type organic semiconductors.

C2-Symmetric ferrocenyl bisthiazoles: synthesis, photophysical, electrochemical and DFT studies

A series of donor-acceptor ferrocenyl substituted bisthiazoles 3-8 were designed and synthesized by the Pd-catalyzed Suzuki, Heck, and Sonogashira cross-coupling reactions. Their photophysical, electrochemical and computational studies reveal strong donor-acceptor interactions. The photonic and electrochemical studies show that the ferrocenyl bisthiazoles with vinyl linkage ferrocenyl-bisthiazole 4, show better electronic communication compared to rest of the ferrocenyl bisthiazoles. The time dependent density functional theory (TD-DFT) calculation at B3LYP on the ferrocenyl substituted bisthiazoles 3-5 was performed, in which the ferrocenyl-bisthiazole 4 shows strong donor-acceptor interactions compared to the Fc-bisthiazoles 3 and 5. The thermal stability of the ferrocenyl substituted bisthiazoles 3-8 is reported, in which Fc-bisthiazole 8 shows high thermal stability. The single crystal structures of ferrocenyl-bisthiazoles 3 and 5 are reported.

Development of a donor polymer using a B ← N unit for suitable LUMO/HOMO energy levels and improved photovoltaic performance

We report a novel approach to tune the LUMO/HOMO energy levels of polymer donors by replacing a C–C unit with a B ← N unit. The polymer containing a B ← N unit exhibits lower LUMO/HOMO levels and a narrower bandgap, leading to an improved photovoltaic performance.

Third-generation solar cells: a review and comparison of polymer:fullerene, hybrid polymer and perovskite solar cells

Third-generation solar cells have excellent potential for delivering large scale, low-cost solar electricity. We review and compare the current understanding of the operation principles, performance improvements and future prospects for polymer:fullerene, hybrid polymer and perovskite solar cells.

Thiazole-based organic semiconductors for organic electronics

Over the past two decades, organic semiconductors have been the subject of intensive academic and commercial interests. Thiazole is a common electron-accepting heterocycle due to electron-withdrawing nitrogen of imine (C=N), several moieties based on thiazole have been widely introduced into organic semiconductors, and yielded high performance in organic electronic devices. This article reviews recent developments in the area of thiazole-based organic semiconductors, particularly thiazole, bithiazole, thiazolothiazole and benzobisthiazole-based small molecules and polymers, for applications in organic field-effect transistors, solar cells and light-emitting diodes. The remaining problems and challenges, and the key research direction in near future are discussed.