Photoinduced Alignment of Polymer Liquid Crystals Containing Azobenzene Moieties in the Side Chain. 5. Effect of the Azo Contents on Alignment Behavior and Enhanced Response

Photomobile Polymer-Piezoelectric Composite for Enhanced Actuation and Energy Generation

In this study, we present an innovative approach to increase the quantum yield and wavelength sensitivity of photomobile polymer (PMP) films based on azobenzene by doping the polymer matrix with noble metal nanoparticles. These doped PMP films showed faster and more significant bending under both UV as well as visible and near-infrared light regardless of whether it was coherent, incoherent, polarized, or unpolarized irradiation, expanding the potential of PMP-based actuators. To illustrate their practical implications, we created a proof-of-concept model of power generation by coupling it to flexible piezoelectric materials under simulated sunlight. This model has been tested under real operating conditions, thus demonstrating the possibility of generating electricity with variable light exposure. Additionally, our synthetic protocol is solvent-free, which is another benefit of environmental relevance. Our research lays the groundwork for the development of sunlight-sensitive devices, such as photomechanical actuators and advanced photovoltaic modules, which may break ground in the thriving field of smart materials. We are confident that the presented findings will contribute to the ongoing discourse in the field and inspire additional advances in renewable energy applications.

Induced Smectic E Phase in a Binary Blend of Side-Chain Liquid Crystalline Polymers

Two liquid crystalline polymers containing an azobenzene or cyanobiphenyl mesogenic side chain that adopt smectic A phases are mechanically mixed at 1:1 mesogen molar ratio at an isotropic phase temperature and then cooled. The resultant binary polymer mixture behaves like a single component as revealed by polarized microscopy observation and differential scanning calorimetry, indicating that the binary mixture forms a fully compatible polymer blend. Moreover, the simple polymer blend unexpectedly leads to a higher-ordered smectic E phase where a herringbone structure is formed with restricted mesogen axis rotation. These results suggest a specific intermolecular interaction between the two mesogens, thereby inducing unusual compatibilized polymer blends and the most ordered liquid crystal (LC) phase.

Photo-Responsivity Improvement of Photo-Mobile Polymers Actuators Based on a Novel LCs/Azobenzene Copolymer and ZnO Nanoparticles Network

The efficiency of photomobile polymers (PMP) in the conversion of light into mechanical work plays a fundamental role in achieving cutting-edge innovation in the development of novel applications ranging from energy harvesting to sensor approaches. Because of their photochromic properties, azobenzene monomers have been shown to be an efficient material for the preparation of PMPs with appropriate photoresponsivity. Upon integration of the azobenzene molecules as moieties into a polymer, they act as an engine, allowing fast movements of up to 50 Hz. In this work we show a promising approach for integrating ZnO nanoparticles into a liquid crystalline polymer network. The addition of such nanoparticles allows the trapping of incoming light, which acts as diffusive points in the polymer matrix. We characterized the achieved nanocomposite material in terms of thermomechanical and optical properties and finally demonstrated that the doped PMP was better performing that the undoped PMP film.

Photoreversible Order-Disorder Transition in an Ionic Liquid Solvated Block Polymer

The structure of a solution of poly(methyl methacrylate)-block-poly(benzyl methacrylate-stat-(4-phenylazophenyl methacrylate)) in the ionic liquid 1-ethyl-3-methyl imidazolium bis(trifluoromethanesulfonylimide) can be controlled with light. We explored the phase behavior of this block polymer at a concentration of 30 wt % as a function of temperature. Remarkably, this solution shows ordering into hexagonally closed packed spheres (HCP) upon heating under visible light, as confirmed by small-angle X-ray scattering. Small amplitude oscillatory shear rheology was used to demonstrate that the system could readily be converted between HCP and disorder by switching between visible and UV light wavelengths at 100 °C. This switching was cycled six times, without any noticeable change in the ordered or disordered state. The dependence on illuminating wavelength arises from the changes in polarity of the azobenzene moiety, which modulates its solubility in this ionic liquid to a significant extent. This is the first example of reversible light-triggered ordering of a "coil-coil" block polymer, a phenomenon that has been previously observed only in liquid crystalline systems.

Chirality on Amorphous High-Tg Polymeric Nanofilms: Optical Activity Amplification by Thermal Annealing

The chiroptical properties of amorphous chiral polymers functionalized with conjugated trans-azoaromatic chromophore linked to the backbone through a chiral cyclic pyrrolidine moiety of one single configuration at the solid state, as thin films, were investigated. For the first time nanometric thin films of amorphous polymers (not liquid crystals) showed a remarkable chiral amplification upon thermal treatment at a temperature close to their Tg. The side-chain azobenzene chromophores rearrangement driven by the enhanced chain mobility seems to favor the formation of nanodomains of conformationally ordered macromolecular chains with one prevailing helical handedness whose optical activity depends on the configuration of the intrinsic chirality of the monomeric units and which as a result are stable at room temperature for a long time.

Molecular Dynamics Study on the Photothermal Actuation of a Glassy Photoresponsive Polymer Reinforced with Gold Nanoparticles with Size Effect

We investigated the optical and thermal actuation behavior of densely cross-linked photoresponsive polymer (PRP) and polymer nanocomposites containing gold nanoparticles (PRP/Au) using all-atom molecular dynamics (MD) simulations. The modeled molecular structures contain a large number of photoreactive mesogens with linear orientation. Flexible side chains are interconnected through covalent bonds under periodic boundary conditions. A switchable dihedral potential was applied on a diazene moiety to describe the photochemical trans-to-cis isomerization. To quantify the photoinduced molecular reorientation and its effect on the macroscopic actuation of the neat PRP and PRP/Au materials, we characterized the photostrain and other material properties including elastic stiffness and thermal stability according to the photoisomerization ratio of the reactive groups. We particularly examined the effect of nanoparticle size on the photothermal actuation by varying the diameter of the nanofiller (10-20 Å) under the same volume fraction of 1.62%. The results indicated that the insertion of the gold nanoparticles enlarges the photostrain of the material while enhancing its mechanical stiffness and thermal stability. When the diameter of the nanoparticle reaches a size similar to or smaller than the length of the mesogen, the interfacial energy between the nanofiller and the surrounding polymer matrix does not significantly affect the alignment of the mesogens, but rather the adsorption energy at the interface generates a stable interphase layer. Hence, these improvements were more effective as the size of the gold nanoparticle decreased. The present findings suggest a wider analysis of the nanofiller-reinforced PRP composites and could be a guide for the mechanical design of the PRP actuator system.

Reversible modulation in luminescence intensity of a single vesicle composed of diblock azo-copolymer and tris(dibenzoylmethanate)(phenanthroline)europium(III)

Tris(dibenzoylmethanate)(phenanthroline)europium(III)[Eu(DBM)(3)Phen]-doped amphiphilic vesicles were obtained by self-assembling of poly(N-isopropylacrylamide)-b-poly[6-[4-(4-methylphenyl-azo) phenoxy] hexylacrylate] (PNIPAM(83)-b-PAzoM(20)) in presence of Eu(DBM)(3)Phen in the mixed solvent of THF/H(2)O (50/50 vol.%). Their optical properties were studied by UV-vis and fluorescence spectroscopies. The UV-vis spectrum showed that the electronic transition bands of azobenzene and Eu(DBM)(3)Phen were overlapped at about 365 nm and the main peak of fluorescence emission band appeared at 612 nm. So the vesicles showed obvious red luminescence. It was found that the fluorescence intensity of a single Eu(DBM)(3)Phen-doped vesicle could be modulated by irradiation with UV and visible light due to the reversible trans-cis-trans photoisomerization reaction of azobenzene moiety. Possible energy allocation process for this property was discussed in details.

Morphological and structural characteristics of diazo dyes at the air–water interface: in situ Brewster angle microscopy and polarized UV/vis analysis

A morphological analysis is presented for Langmuir films of the diazo dyes Sudan 4 (S4), Sudan 3 (S3), and Sudan red (SR), using Brewster angle microscopy. Stable nonmonomolecular structures are formed at the air-water interface denoted as a plateau in the pressure-area isotherms. Monolayer domains are evident by the contrastless image even before the pressure onset, which grow in size until it reached a condensed monolayer. This behavior resembles that of Langmuir films from simple aromatic fatty acids. Films from all the azo dyes display similar features, according to the surface potential isotherms and in situ polarized UV/vis spectroscopy except for the larger area per molecule occupied by S4 and SR. This is attributed to the presence of CH(3) groups that cause steric hindrance modifying the organization of diazo dye molecules at the air-water interface. UV/vis polarized absorption spectroscopy showed preferential orientation of S4 and S3 on the water surface, while SR molecules lie isotropically. For these three diazo dyes, film absorption was negligible at very large areas per molecule, becoming nonzero only at a critical area coinciding with the onset of surface potential. The critical area is ascribed to the formation of a H-bonded network between water molecules and diazo dye headgroups.