Dendrimeric micelles for controlled drug release and targeted delivery

Hydrogel carrier with bubble vibration enhancer for ultrasound-triggered drug release

Hydrogel-based drug carriers provide on-demand drug release via external stimuli. Ultrasound is a promising method because of the potential for remotely releasing the drug. However, intense ultrasound irradiation has been required in previous studies. This paper reports drug model release from hydrogel carriers encapsulating bubble vibration enhancers (BVEs) consisting of microbubbles coated with a lipid membrane. Vibration of BVEs induced by ultrasound stimulation promoted the release of drug models with ultrasound irradiation controlled to a biologically safe acoustic pressure based on spatial-peak temporal-average intensity (ISPTA). The release ratio increased significantly from 2.3 % without BVEs and ultrasound to 10.2 % with both. To evaluate the frequency response, the release ratio was measured at three different ultrasound frequencies (0.3, 1.8, and 2.5 MHz), showing increased efficiency as the frequency approached the resonance frequency of the BVEs. For in vivo applications, hydrogel microspherical carriers with BVEs achieved a 12 % release ratio. Poly-L-lysine coating successfully suppressed the drug release to 0.2 %. The carriers demonstrated repeated responsiveness when ultrasound was applied in three 5-minute intervals. The hydrogel carrier encapsulating BVEs we proposed is a promising in vivo device capable of releasing drugs on demand by ultrasound irradiation based on its high biosafety and acoustic responsiveness.

Development of chitosan/sodium carboxymethyl cellulose-based polyelectrolyte complex of dexamethasone for treatment of anterior uveitis

Anterior uveitis is one of the most prevalent forms of ocular inflammation caused by infections, trauma, and other idiopathic conditions if not treated properly, it can cause complete blindness. Therefore, this study aimed to formulate and evaluate dexamethasone sodium phosphate (DSP) loaded polyelectrolyte complex (PEC) nanoparticles (NPs) for the treatment of anterior uveitis. DSP-loaded PEC-NPs were formed through complex coacervation by mixing low molecular weight chitosan and the anionic polymer carboxy methyl cellulose (CMC). The formulations were optimized using Box-Behnken design and evaluated the effect of independent variables: Chitosan concentration, CMC concentration, and pH of chitosan solution on the dependent variables: particle size (PS), Polydispersity Index (PDI), pH of the formulation, and % entrapment efficacy (%EE). The PS, PDI, zeta potential, and pH of the optimized formulation were found 451 ± 82.0995 nm, 0.3807 ± 0.1862, +20.33 ± 1.04 mV and 6.8367 ± 0.0737 respectively. The %EE and drug loading of formulation were 61.66 ± 4.2914% and 21.442 ± 1.814% respectively.In vitrodrug release studies of optimized formulation showed the prolonged release up to 12 h whereas, the marketed formulation showed the burst release 85.625 ± 4.3062% in 1 h and 98.1462 ± 3.0921% at 6 h, respectively. Fourier transform infrared studies suggested the effective incorporation of the drug into the PEC-NPs formulation whereas differential scanning calorimetry and x-ray diffraction studies showed the amorphized nature of the drug in the formulation. Transmission electron microscopy study showed self-assembled, nearly spherical, core-shell nanostructures. The corneal permeation study showed higher permeation of the drug from PEC-NPs compared to the marketed formulation. Hen's Eggs test-Chorioallantoic Membrane test of the optimized formulation revealed non-irritant and safe for ocular administration. Therefore, DSP-loaded PEC-NPs are an effective substitute for conventional eye drops due to their ability to increase bioavailability through longer precorneal retention duration and sustained drug release.

Epilepsy Treatment and Diagnosis Enhanced by Current Nanomaterial Innovations: A Comprehensive Review

Epilepsy is a complex disease in the brain. Complete control of seizure has always been a challenge in epilepsy treatment. Currently, clinical management primarily involves pharmacological and surgical interventions, with the former being the preferred approach. However, antiepileptic drugs often exhibit low bioavailability due to inherent limitations such as poor water solubility and difficulty penetrating the blood-brain barrier (BBB). These issues significantly reduce the drugs' effectiveness and limit their clinical application in epilepsy treatment. Additionally, the diagnostic accuracy of current imaging techniques and electroencephalography (EEG) for epilepsy is suboptimal, often failing to precisely localize epileptogenic tissues. Accurate diagnosis is critical for the surgical management of epilepsy. Thus, there is a pressing need to enhance both the therapeutic outcomes of epilepsy medications and the diagnostic precision of the condition. In recent years, the advancement of nanotechnology in the biomedical sector has led to the development of nanomaterials as drug carriers. These materials are designed to improve drug bioavailability and targeting by leveraging their large specific surface area, facile surface modification, ability to cross the BBB, and high biocompatibility. Furthermore, nanomaterials have been utilized as contrast agents in imaging and as materials for EEG electrodes, enhancing the accuracy of epilepsy diagnoses. This review provides a comprehensive examination of current research on nanomaterials in the treatment and diagnosis of epilepsy, offering new strategies and directions for future investigation.

Zwitterionic Injectable Hydrogel-Combined Chemo- and Immunotherapy Medicated by Monomolecular Micelles to Effectively Prevent the Recurrence of Tumor Post Operation

Surgical resection remains the most common method of tumor treatment; however, the high recurrence and metastasis after surgery need to be solved urgently. Herein, we report an injectable zwitterionic hydrogel based on "thiol-ene" click chemistry containing doxorubicin (DOX) and a macrophage membrane (MM)-coated 1-methyl-tryptophan (1-MT)-loaded polyamide-amine dendrimer (P-DOX/1MT) for preventing the postoperative recurrence of tumors. The results indicated that P-DOX/1MT@MM exhibited enhanced recognition and uptake of the dendrimer by tumor cells and induced the immunogenic cell death. In the mice tumor model, the P-DOX/1MT@MM-Gel exhibited high therapeutic efficiency, which could significantly reduce the recurrence of the tumor, including suppressing tumor growth, promoting dendritic cell maturation, and increasing tumor-infiltrating cytotoxic T lymphocytes. The mechanism analysis revealed that the hydrogel greatly reduces the side effects to normal tissues and significantly improves its therapeutic effect. 1MT in the hydrogel is released more rapidly, improving the tumor suppressor microenvironment and increasing the tumor cell sensitivity to DOX. Then, the DOX in the P-DOX/1MT@MM effectively eliminatedo the residual tumor cells and exerted enhanced toxicity. In conclusion, this novel injectable hydrogel that combines chemotherapy and immunotherapy has the property of sequential drug release and is a promising strategy for preventing the postoperative recurrence of tumors.

Evaluation of Encapsulation Potential of Selected Star-Hyperbranched Polyglycidol Architectures: Predictive Molecular Dynamics Simulations and Experimental Validation

Polymers, including non-linear copolymers, have great potential in the development of drug delivery systems with many advantages, but the design requires optimizing polymer-drug interactions. Molecular dynamics (MD) simulations can provide insights into polymer-drug interactions for designing delivery systems, but mimicking formulation processes such as drying is often not included in in silico studies. This study demonstrates an MD approach to model drying of systems comprising either hydrophilic tinidazole or hydrophobic clotrimazole drugs with amphiphilic hyperbranched copolyethers. The simulated drying protocol was critical for elucidating drug encapsulation and binding mechanisms. Experimentally, two polymers were synthesized and shown to encapsulate clotrimazole with up to 83% efficiency, guided by interactions with the hydrophobic core observed in simulations. In contrast, tinidazole is associated with surface regions, indicating capacity differences between drug types. Overall, this work highlights MD simulation of the drying process as an important tool for predicting drug-polymer complex behaviour. The modelled formulation protocol enabled high encapsulation efficiency and opened possibilities for the design of delivery systems based on computationally derived binding mechanisms. This demonstrates a computational-experimental approach where simulated drying was integral to elucidating interactions and developing optimized complexes, emphasizing the value of molecular modelling for the development of drug delivery formulations.

Cross-linkable star-hyperbranched unimolecular micelles for the enhancement of the anticancer activity of clotrimazole

Clotrimazole, a hydrophobic drug routinely used in the treatment of vaginal candidiasis, also shows antitumor activity. However, its use in chemotherapy has been unsuccessful to date due to its low solubility in aqueous media. In this work, new unimolecular micelles based on polyether star-hyperbranched carriers of clotrimazole are presented that can enhance solubility, and consequently the bioavailability, of clotrimazole in water. The amphiphilic constructs consisting of a hydrophobic poly(n-alkyl epoxide) core and hydrophilic corona of hyperbranched polyglycidol were synthesized in a three-step anionic ring-opening polymerization of epoxy monomers. The synthesis of such copolymers, however, was only possible by incorporating a linker to facilitate the elongation of the hydrophobic core with glycidol. Unimolecular micelles-clotrimazole formulations displayed significantly increased activity against human cervical cancer HeLa cells compared to the free drug, along with a weak effect on the viability of the normal dermal microvascular endothelium cells HMEC1. This selective activity of clotrimazole on cancer cells with little effect on normal cells was a result of the fact that clotrimazole targets the Warburg effect in cancer cells. Flow cytometric analysis revealed that the encapsulated clotrimazole significantly blocks the progression of the HeLa cycle in the G0/G1 phase and induces apoptosis. In addition, the ability of the synthesized amphiphilic constructs to form a dynamic hydrogel was demonstrated. Such a gel facilitates the delivery of drug-loaded single-molecule micelles to the affected area, where they can form a continuous, self-healing layer.

Self-Healable, Injectable Hydrogel with Enhanced Clotrimazole Solubilization as a Potential Therapeutic Platform for Gynecology

Injectable, self-healing hydrogels with enhanced solubilization of hydrophobic drugs are urgently needed for antimicrobial intravaginal therapies. Here, we report the first hydrogel systems constructed of dynamic boronic esters cross-linking unimolecular micelles, which are a reservoir of antifungal hydrophobic drug molecules. The selective hydrophobization of hyperbranched polyglycidol with phenyl units in the core via ester or urethane bonds enabled the solubilization of clotrimazole, a water-insoluble drug of broad antifungal properties. The encapsulation efficiency of clotrimazole increases with the degree of the HbPGL core modification; however, the encapsulation is more favorable in the case of urethane derivatives. In addition, the rate of clotrimazole release was lower from HbPGL hydrophobized via urethane bonds than with ester linkages. In this work, we also revealed that the hydrophobization degree of HbPGL significantly influences the rheological properties of its hydrogels with poly(acrylamide-ran-2-acrylamidephenylboronic acid). The elastic strength of networks (G_N) and the thermal stability of hydrogels increased along with the degree of HbPGL core hydrophobization. The degradation of the hydrogel constructed of the neat HbPGL was observed at approx. 40 °C, whereas the hydrogels constructed on HbPGL, where the monohydroxyl units were modified above 30 mol %, were stable above 50 °C. Moreover, the flow and self-healing ability of hydrogels were gradually decreased due to the reduced dynamics of macromolecules in the network as an effect of increased hydrophobicity. The changes in the rheological properties of hydrogels resulted from the engagement of phenyl units into the intermolecular hydrophobic interactions, which besides boronic esters constituted additional cross-links. This study demonstrates that the HbPGL core hydrophobized with phenyl units at 30 mol % degrees via urethane linkages is optimal in respect of the drug encapsulation efficiency and rheological properties including both self-healable and injectable behavior. This work is important because of a proper selection of a building component for the construction of a therapeutic hydrogel platform dedicated to the intravaginal delivery of hydrophobic drugs.

The Promise of Nanotechnology in Personalized Medicine

Both personalized medicine and nanomedicine are new to medical practice. Nanomedicine is an application of the advances of nanotechnology in medicine and is being integrated into diagnostic and therapeutic tools to manage an array of medical conditions. On the other hand, personalized medicine, which is also referred to as precision medicine, is a novel concept that aims to individualize/customize therapeutic management based on the personal attributes of the patient to overcome blanket treatment that is only efficient in a subset of patients, leaving others with either ineffective treatment or treatment that results in significant toxicity. Novel nanomedicines have been employed in the treatment of several diseases, which can be adapted to each patient-specific case according to their genetic profiles. In this review, we discuss both areas and the intersection between the two emerging scientific domains. The review focuses on the current situation in personalized medicine, the advantages that can be offered by nanomedicine to personalized medicine, and the application of nanoconstructs in the diagnosis of genetic variability that can identify the right drug for the right patient. Finally, we touch upon the challenges in both fields towards the translation of nano-personalized medicine.

Photochemical Internalization of Etoposide Using Dendrimer Nanospheres Loaded with Etoposide and Protoporphyrin IX on a Glioblastoma Cell Line

Glioblastoma multiforme (GBM) is the most common malignant primary neoplasm of the adult central nervous system originating from glial cells. The prognosis of those affected by GBM has remained poor despite advances in surgery, chemotherapy, and radiotherapy. Photochemical internalization (PCI) is a release mechanism of endocytosed therapeutics into the cytoplasm, which relies on the membrane disruptive effect of light-activated photosensitizers. In this study, phototherapy by PCI was performed on a human GBM cell-line using the topoisomerase II inhibitor etoposide (Etop) and the photosensitizer protoporphyrin IX (PpIX) loaded in nanospheres (Ns) made from generation-5 polyamidoamine dendrimers (PAMAM(G5)). The resultant formulation, Etop/PpIX-PAMAM(G5) Ns, measured 217.4 ± 2.9 nm in diameter and 40.5 ± 1.3 mV in charge. Confocal microscopy demonstrated PpIX fluorescence within the endo-lysosomal compartment, and an almost twofold increase in cellular uptake compared to free PpIX by flow cytometry. Phototherapy with 3 min and 5 min light illumination resulted in a greater extent of synergism than with co-administered Etop and PpIX; notably, antagonism was observed without light illumination. Mechanistically, significant increases in oxidative stress and apoptosis were observed with Etop/PpIX-PAMAM(G5) Ns upon 5 min of light illumination in comparison to treatment with either of the agents alone. In conclusion, simultaneous delivery and endo-lysosomal co-localization of Etop and PpIX by PAMAM(G5) Ns leads to a synergistic effect by phototherapy; in addition, the finding of antagonism without light illumination can be advantageous in lowering the dark toxicity and improving photo-selectivity.

Star-Shaped Poly(furfuryl glycidyl ether)-Block-Poly(glyceryl glycerol ether) as an Efficient Agent for the Enhancement of Nifuratel Solubility and for the Formation of Injectable and Self-Healable Hydrogel Platforms for the Gynaecological Therapies

In this paper, we present novel well-defined unimolecular micelles constructed a on poly(furfuryl glycidyl ether) core and highly hydrophilic poly(glyceryl glycerol ether) shell, PFGE-b-PGGE. The copolymer was synthesized via anionic ring-opening polymerization of furfuryl glycidyl ether and (1,2-isopropylidene glyceryl) glycidyl ether, respectively. MTT assay revealed that the copolymer is non-cytotoxic against human cervical cancer endothelial (HeLa) cells. The copolymer thanks to furan moieties in its core is capable of encapsulation of nifuratel, a hydrophobic nitrofuran derivative, which is a drug applied in the gynaecology therapies that shows a broad antimicroorganism spectrum. The study shows high loading capacity of the copolymer, i.e., 146 mg of nifuratel per 1 g of copolymer. The load unimolecular micelles were characterized using DLS and TEM microscopy and compared with the reference glyceryl glycerol ether homopolymer sample. The presence of numerous 1,2-diol moieties in the shell of PFGE-b-PGG macromolecules enabled the formation of reversible cross-links with 2-acrylamidephenylboronic acid-based polyacrylamide. The obtained hydrogels were both injectable and self-healable, which was confirmed with a rheological study.

Dextran based amphiphilic self-assembled biopolymeric macromolecule synthesized via RAFT polymerization as indomethacin carrier

This work demonstrates a facile pathway to develop a biopolymer based amphiphilic macromolecule through reversible addition-fragmentation chain transfer (RAFT) polymerization, using dextran (a biopolymer) as starting material. Also, a new hydrophobic monomer [2-methyl-acrylic acid 1-benzyl-1H-[1,2,3] triazol-4-ylmethyl ester (MABTE)] has been synthesized using methacrylic acid via "click" approach. The resultant copolymer displays controlled radical polymerization characteristics: narrow polydispersity (Ð) and controlled molecular weight as obtained through advanced polymer chromatography (APC) analysis. In aqueous solution, the copolymer can proficiently be self-assembled to provide micellar structure, which has been evidenced from field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) analyses. The in-vitro cytotoxicity study illustrates the nontoxic nature of the copolymer up to 100 μg/mL polymer concentration. The copolymer has been found to be worthy as an efficient carrier for the sustained release of hydrophobic drug: Indomethacin (IND).

Polymeric micelles in drug delivery: An insight of the techniques for their characterization and assessment in biorelevant conditions

Polymeric micelles, i.e. aggregation colloids formed in solution by self-assembling of amphiphilic polymers, represent an innovative tool to overcome several issues related to drug administration, from the low water-solubility to the poor drug permeability across biological barriers. With respect to other nanocarriers, polymeric micelles generally display smaller size, easier preparation and sterilization processes, and good solubilization properties, unfortunately associated with a lower stability in biological fluids and a more complicated characterization. Particularly challenging is the study of their interaction with the biological environment, essential to predict the real in vivo behavior after administration. In this review, after a general presentation on micelles features and properties, different characterization techniques are discussed, from the ones used for the determination of micelles basic characteristics (critical micellar concentration, size, surface charge, morphology) to the more complex approaches used to figure out micelles kinetic stability, drug release and behavior in the presence of biological substrates (fluids, cells and tissues). The techniques presented (such as dynamic light scattering, AFM, cryo-TEM, X-ray scattering, FRET, symmetrical flow field-flow fractionation (AF4) and density ultracentrifugation), each one with their own advantages and limitations, can be combined to achieve a deeper comprehension of polymeric micelles in vivo behavior. The set-up and validation of adequate methods for micelles description represent the essential starting point for their development and clinical success.

Use of Anticancer Platinum Compounds in Combination Therapies and Challenges in Drug Delivery

As one of the leading and most important metal-based drugs, platinum-based pharmaceuticals are widely used in the treatment of solid malignancies. Despite significant side effects and acquired drug resistance have limited their clinical applications, platinum has shown strong inhibitory effects for a wide assortment of tumors. Drug delivery systems using emerging technologies such as liposomes, dendrimers, polymers, nanotubes and other nanocompositions, all show promise for the safe delivery of platinum-based compounds. Due to the specificity of nano-formulations; unwanted side-effects and drug resistance can be largely averted. In addition, combinational therapy has been shown to be an effective way to improve the efficacy of platinum based anti-tumor drugs. This review first introduces drug delivery systems used for platinum and combinational therapeutic delivery. Then we highlight some of the recent advances in the field of drug delivery for combinational therapy; specifically progress in leveraging the cytotoxic nature of platinum-based drugs, the combinational effect of other drugs with platinum, while evaluating the drug targeting, side effect reducing and sitespecific nature of nanotechnology-based delivery platforms.

The Role of Branch Cell Symmetry and Other Critical Nanoscale Design Parameters in the Determination of Dendrimer Encapsulation Properties

This article reviews progress over the past three decades related to the role of dendrimer-based, branch cell symmetry in the development of advanced drug delivery systems, aqueous based compatibilizers/solubilizers/excipients and nano-metal cluster catalysts. Historically, it begins with early unreported work by the Tomalia Group (i.e., The Dow Chemical Co.) revealing that all known dendrimer family types may be divided into two major symmetry categories; namely: Category I: symmetrical branch cell dendrimers (e.g., Tomalia, Vögtle, Newkome-type dendrimers) possessing interior hollowness/porosity and Category II: asymmetrical branch cell dendrimers (e.g., Denkewalter-type) possessing no interior void space. These two branch cell symmetry features were shown to be pivotal in directing internal packing modes; thereby, differentiating key dendrimer properties such as densities, refractive indices and interior porosities. Furthermore, this discovery provided an explanation for unimolecular micelle encapsulation (UME) behavior observed exclusively for Category I, but not for Category II. This account surveys early experiments confirming the inextricable influence of dendrimer branch cell symmetry on interior packing properties, first examples of Category (I) based UME behavior, nuclear magnetic resonance (NMR) protocols for systematic encapsulation characterization, application of these principles to the solubilization of active approved drugs, engineering dendrimer critical nanoscale design parameters (CNDPs) for optimized properties and concluding with high optimism for the anticipated role of dendrimer-based solubilization principles in emerging new life science, drug delivery and nanomedical applications.

Coating and Functionalization Strategies for Nanogels and Nanoparticles for Selective Drug Delivery

Drug delivery is a fascinating research field with several development opportunities. Great attention is now focused on colloidal systems, nanoparticles, and nanogels and on the possibility of modifying them in order to obtain precise targeted drug delivery systems. The aim of this review is to give an overview of the main available surface functionalization and coating strategies that can be adopted in order to modify the selectivity of the nanoparticles in the delivery process and obtain a final system with great targeted drug delivery ability. We also highlight the most important fields of application of these kinds of delivery systems and we propose a comparison between the advantages and disadvantages of the described functionalization strategies.

Trastuzumab targeted micellar delivery of docetaxel using dendron–polymer conjugates

Incorporation of a therapeutic antibody into nanosized drug delivery systems can improve their target specificity.

Nanomaterials multifunctional behavior for enlightened cancer therapeutics

Cancer is an outrageous disease with uncontrolled differentiation, growth, and migration to the other parts of the body. It is the second-most common cause of death both in the U.S. and worldwide. Current conventional therapies, though much improved and with better prognosis, have several limitations. Chemotherapeutic agents, for instance, are cytotoxic to both tumor and healthy cells, and the non-specific distribution of drugs at tumor sites limits the dose administered. Nanotechnology, which evolved from the coalescence and union of varied scientific disciplines, is a novel science that has been the focus of much research. This technology is generating more effective cancer therapies to overcome biomedical and biophysical barriers against standard interventions in the body; its unique magnetic, electrical, and structural properties make it a promising tool. This article reviews endogenous- and exogenous-based stimulus-responsive drug delivery systems designed to overcome the limitations of conventional therapies. The article also summarizes the study of nanomaterials, including polymeric, gold, silver, magnetic, and quantum dot nanoparticles. Though an array of drug delivery systems has so far been proposed, there remain many challenges and concerns that should be addressed in order to fill the gaps in the field. Prominence is given to drug delivery systems that employ external- and internal-based stimuli and that are emerging as promising tools for cancer therapeutics in clinical settings.

Glutathione from recovered glucose as ingredient in antioxidant nanocapsules for triggered flavor delivery

Glucose recovered via enzymatic hydrolysis of rayon fibers was used for glutathione production by S. cerevisiae. Glutathione was used in combination with HSA and silk fibroin for ultrasound assisted nanocapsules production. Triggered release of flavor substances and antioxidant properties of the nanocapsules was demonstrated.

Dendrimer-based micelles as cyto-compatible nanocarriers

The aim of the present study is to compare the synthesized dendritic architectures in terms of self-assembly and transport potential for hydrophobic guest molecules.

Drug Delivery Systems from Self-Assembly of Dendron-Polymer Conjugates †

This review highlights the utilization of dendron-polymer conjugates as building blocks for the fabrication of nanosized drug delivery vehicles. The examples given provide an overview of the evolution of these delivery platforms, from simple micellar containers to smart stimuli- responsive drug delivery systems through their design at the macromolecular level. Variations in chemical composition and connectivity of the dendritic and polymeric segments provide a variety of self-assembled micellar nanostructures that embody desirable attributes of viable drug delivery systems.

Binding analysis of antioxidant polyphenols with PAMAM nanoparticles

Dietary polyphenols are abundant micronutrients in our diet and paly major role in prevention of degenerative diseases. The binding efficacy of antioxidant polyphenols resveratrol, genistein, and curcumin with PAMAM-G3 and PAMAM-G4 nanoparticles was investigated in aqueous solution at physiological conditions, using multiple spectroscopic methods, TEM images, and docking studies. The polyphenol bindings are via hydrophilic, hydrophobic, and H-bonding contacts with resveratrol forming more stable conjugates. As PAMAM size increased the loading efficacy and the stability of polyphenol-polymer conjugates were increased. Polyphenol binding induced major alterations of dendrimer morphology. PAMAM nanoparticles are capable of delivery of polyphenols in vitro.

PAMAM dendrimers in drug delivery: loading efficacy and polymer morphology

The binding efficacy of anticancer drugs doxorubicin and tamoxifen with polyamidoamine (PAMAM-G4) dendrimers was studied in aqueous solution at physiological pH. The results of multiple spectroscopic methods, transmission electron microscopy (TEM), and molecular modeling of conjugated drug–polymer were examined. Structural analysis showed that drug–polymer conjugation occurs mainly via H-bonding and hydrophilic and hydrophobic contacts. Doxorubicin forms a more stable conjugate with PAMAM-G4 than tamoxifen. The drug loading efficacy was 40%–50%. The TEM images showed major changes in the PAMAM morphology upon drug encapsulation. Modeling showed that drug is located in the polymer surface and in the internal cavities. PAMAM nanoparticles are capable of transporting doxorubicin and tamoxifen in vitro. This minireview presents the most recent work performed with the dendrimers demonstrating their usefulness for drug delivery in cancer therapy.

H2S-Releasing Polymer Micelles for Studying Selective Cell Toxicity

We report the preparation of S-aroylthiooxime (SATO) functionalized amphiphilic block copolymer micelles that release hydrogen sulfide (H₂S), a gaseous signaling molecule of relevance to various physiological and pathological conditions. The micelles release H₂S in response to cysteine with a half-life of 3.3 h, which is substantially slower than a related small molecule SATO. Exogenous administration of H₂S impacts growth and proliferation of cancer cells; however, the limited control over H₂S generation from inorganic sulfide sources results in conflicting reports. Therefore, we compare the cellular cytotoxicity of SATO-functionalized micelles, which release H₂S in a sustained manner, to Na₂S, which releases H₂S in a single dose. Our results show that H₂S-releasing micelles significantly reduce the survival of HCT116 colon cancer cells relative to Na₂S, GYY4137, and a small molecule SATO, indicating that release kinetics may play an important role in determining toxicity of H₂S toward cancer cells. Furthermore, H₂S-releasing micelles are well tolerated by immortalized fibroblasts (NIH/3T3 cells), suggesting a selective toxicity of H₂S toward cancer cells.

Biocompatible Polyion Complex Micelles Synthesized from Arborescent Polymers

Water-dispersible polyion complex (PIC) micelles were prepared by the self-assembly of an arborescent polystyrene-graft-poly(2-vinylpyridine) copolymer (denoted G0PS-g-P2VP or G1) serving as core and a poly(acrylic acid)-block-poly(2-hydroxyethyl acrylate) (PAA-b-PHEA) double-hydrophilic block copolymer (DHBC) forming a shell. Varying the density of hydrophilic polymer chains in the stabilizing layer provided control over the size and structure of the entities obtained, from large flocculated species to stable isolated PIC micelles with diameters ranging from 42 to 67 nm. The hydrodynamic radius (determined from dynamic light scattering measurements), and the weight-average molar mass (M̅_w) and radius of gyration of the scatterers (extracted from static multiangle light scattering data) evidenced the formation of either isolated or aggregated PIC micelles depending on the self-assembly conditions used (pH, concentration and mixing molar ratio f). Changes in the morphology of the arborescent copolymer after complexation were observed by atomic force microscopy (AFM) imaging. In particular, by varying the force applied with the AFM tip on the samples, the core-shell structure of the PIC micelles was clearly evidenced. The PIC micelles displayed no significant cytotoxicity toward mouse fibroblast L929 cells, a standard cell line recommended for toxicity assays, due to the good biocompatibility of the hydrophilic PAA-b-PHEA shell. In spite of a negative residual zeta potential due to an excess of negative charges, fluorescently labeled PIC* micelles were successfully internalized by L929 cells, as confirmed by laser scanning confocal microscopy (LSCM) and transmission electron microscopy (TEM).

Protein conjugation with PAMAM nanoparticles: Microscopic and thermodynamic analysis

PAMAM dendrimers form strong protein conjugates that are used in drug delivery systems. We report the thermodynamic and binding analysis of polyamidoamine (PAMAM-G4) conjugation with human serum albumin (HSA), bovine serum albumin (BSA) and milk beta-lactoglobulin (b-LG) in aqueous solution at physiological pH. Hydrophobicity played a major role in PAMAM-protein interactions with more hydrophobic b-LG forming stronger polymer-protein conjugates. Thermodynamic parameters showed PAMAM-protein bindings occur via hydrophobic and H-bonding contacts for b-LG, while van der waals and H-bonding interactions prevail in HSA and BSA-polymer conjugates. The protein loading efficacy was 45-55%. PAMAM complexation induced major alterations of protein conformation. TEM images show major polymer morphological changes upon protein conjugation.

Targeted conjugation of breast anticancer drug tamoxifen and its metabolites with synthetic polymers

Conjugation of antitumor drug tamoxifen and its metabolites, 4-hydroxytamxifen and ednoxifen with synthetic polymers poly(ethylene glycol) (PEG), methoxypoly (ethylene glycol) polyamidoamine (mPEG-PAMAM-G3) and polyamidoamine (PAMAM-G4) dendrimers was studied in aqueous solution at pH 7.4. Multiple spectroscopic methods, transmission electron microscopy (TEM) and molecular modeling were used to characterize the drug binding process to synthetic polymers. Structural analysis showed that drug-polymer binding occurs via both H-bonding and hydrophobic contacts. The order of binding is PAMAM-G4>mPEG-PAMAM-G3>PEG-6000 with 4-hydroxttamoxifen forming more stable conjugate than tamoxifen and endoxifen. Transmission electron microscopy showed significant changes in carrier morphology with major changes in the shape of the polymer aggregate as drug encapsulation occurred. Modeling also showed that drug is located in the surface and in the internal cavities of PAMAM with the free binding energy of -3.79 for tamoxifen, -3.70 for 4-hydroxytamoxifen and -3.69kcal/mol for endoxifen, indicating of spontaneous drug-polymer interaction at room temperature.

Doxorubicin-loaded micelles based on multiarm star-shaped PLGA-PEG block copolymers: influence of arm numbers on drug delivery

Star-shaped block copolymers based on poly(D,L-lactide-co-glycolide) (PLGA) and poly(ethylene glycol) (PEG) (st-PLGA-PEG) were synthesized with structural variation on arm numbers in order to investigate the relationship between the arm numbers of st-PLGA-PEG copolymers and their micelle properties. st-PLGA-PEG copolymers with arm numbers 3, 4 and 6 were synthesized by using different cores such as trimethylolpropane, pentaerythritol and dipentaerythritol, and were characterized by nuclear magnetic resonance and gel permeation chromatography. The critical micelle concentration decreased with increasing arm numbers in st-PLGA-PEG copolymers. The doxorubicin-loaded st-PLGA-PEG micelles were prepared by a modified nanoprecipitation method. Micellar properties such as particle size, drug loading content and in vitro drug release behavior were investigated as a function of the number of arms and compared with each other. The doxorubicin-loaded 4-arm PLGA-PEG micelles were found to have the highest cellular uptake efficiency and cytotoxicity compared with 3-arm PLGA-PEG micelles and 6-arm PLGA-PEG micelles. The results suggest that structural tailoring of arm numbers from st-PLGA-PEG copolymers could provide a new strategy for designing drug carriers of high efficiency. Structural tailoring of arm numbers from star shaped-PLGA-PEG copolymers (3-arm/4-arm/6-arm-PLGA-PEG) could provide a new strategy for designing drug carriers of high efficiency.

Structural analysis of doxorubicin-polymer conjugates

Synthetic polymers poly(ethylene glycol) (PEG), methoxypoly (ethylene glycol) polyamidoamine (mPEG-PAMAM-G3) and polyamidoamine (PAMAM-G4) dendrimers were used for encapsulation of antibiotic drug doxorubicin (Dox) and its analogue N-(trifluoroacetyl) doxorubicin (FDox) in aqueous solution at pH 7.4. Multiple spectroscopic methods, transmission electron microscopy (TEM) and molecular modeling were used to characterize the drug binding process to synthetic polymers. Structural analysis showed that drug-polymer binding occurs via both H-bonding and hydrophobic contacts. The order of binding is PAMAM-G4>mPEG-PAMAM-G3>PEG-6000 with Dox forming more stable conjugate than FDox. Transmission electron microscopy showed significant changes in carrier morphology with major changes in the shape of the polymer aggregate as drug encapsulation occurred. Modeling also showed that drug is located in the surface and in the internal cavities of PAMAM with the free binding energy of -4.14 kcal/mol for Dox and -3.93 kcal/mol for FDox, indicating of spontaneous drug-polymer interaction at room temperature.