A nanoemulsion formulation of tamoxifen increases its efficacy in a breast cancer cell line

Preclinical evaluation of L-fucoside from lapachol-loaded nanoemulsion as a strategy to breast cancer treatment

Breast cancer prevails as the most common cancer in women, underscoring an urgent need for more effective therapies. This study explores the potential of our newly developed nanoemulsion containing a novel fucoside derivative of lapachol (NE-F-LapA) as an intravenous treatment strategy. We sought to overcome the solubility issues associated with fucoside with this improved drug delivery strategy that enhances tumor delivery and mitigates other dose-limiting toxicities. Nanoemulsion was prepared and characterized by DLS, zeta potential, encapsulation efficiency, and storage stability. Cytotoxicity against breast cancer cell lines (4T1 and MDA-MB-231) and non-tumor human fibroblasts (NTHF) were evaluated. In vivo assays included antitumoral activity performance and acute systemic toxicity in mice models. NE-F-LapA was synthesized and optimized to 200 nm size, - 20 mV zeta potential, and near-complete (>98%) drug encapsulation. Stability exceeded 6 months, and biological fluid exposure maintained suitable properties for administration. In vitro, NE-F-LapA showed high toxicity (3 µM) against 4T1 and MDA-MB-231, enhanced five times the breast cancer cell uptake and three times the selectivity when compared to normal cells. Systemic toxicity assessment in mice revealed no concerning hematological or biochemical changes. Finally, in a 4T1 breast tumor model, NE-F-LapA significantly inhibited growth by 50% of the subcutaneous 4T1 tumor and reduced lung metastases 5-fold versus control. Overall, tailored nanoemulsification of the lapachol derivative enabled effective intravenous administration and improved efficacy over the free drug, indicating promise for enhanced breast cancer therapy pending further optimization.

Development of a Nanoemulgel for the Topical Application of Mupirocin

Mupirocin (MUP) is an effective topical antibiotic with poor skin permeability; however, its skin permeability can be improved by a nanoemulsion formulation based on eucalyptus oil or eucalyptol. Despite this improvement, the nanoemulsion has limitations, such as low viscosity, low spreadability, and poor retention on the skin. To overcome these limitations, the aim of this study was to develop a nanoemulgel formulation that would enhance its rheological behaviour and physicochemical properties. The MUP nanoemulgel was prepared by incorporating a preprepared MUP nanoemulsion into Carbopol gel at a concentration of 0.75% in a 1:1 ratio. The nanoemulgel formulations were characterised and evaluated for their physicochemical and mechanical strength properties, rheological behaviour, and in vitro skin permeation and deposition, as well as antibacterial studies. Both nanoemulgels exhibited stability at temperatures of 4 and 25 °C for a period of 3 months. They had a smooth, homogenous, and consistent appearance and displayed non-Newtonian pseudoplastic behaviour, with differences in their viscosity and spreadability. However, both nanoemulgels exhibited lower skin permeability compared to the marketed control. The local accumulation efficiency of MUP from nanoemulgel after 8 h was significantly higher than that of the control, although there was no significant difference after 24 h. Micro-CT scan imaging allowed visualisation of these findings and interpretation of the deposited drug spots within the layers of treated skin. While there were no significant differences in the antibacterial activities between the nanoemulgels and the control, the nanoemulgels demonstrated superiority over the control due to their lower content of MUP. These findings support the potential use of the nanoemulgel for targeting skin lesions where high skin deposition and low permeability are required, such as in the case of topical antibacterial agents.

Nanotechnology revolutionises breast cancer treatment: harnessing lipid-based nanocarriers to combat cancer cells

One of the most common cancers that occur in females is breast cancer. Despite the significant leaps and bounds that have been made in treatment of breast cancer, the disease remains one of the leading causes of death among women and a major public health challenge. The therapeutic efficacy of chemotherapeutics is hindered by chemoresistance and toxicity. Nano-based lipid drug delivery systems offer controlled drug release, nanometric size and site-specific targeting. Breast cancer treatment includes surgery, chemotherapy and radiotherapy. Despite this, no single method of treatment for the condition is currently effective due to cancer stem cell metastasis and chemo-resistance. Therefore, the employment of nanocarrier systems is necessary in order to target breast cancer stem cells. This article addresses breast cancer treatment options, including modern treatment procedures such as chemotherapy, etc. and some innovative therapeutic options highlighting the role of lipidic nanocarriers loaded with chemotherapeutic drugs such as nanoemulsion, solid-lipid nanoparticles, nanostructured lipid carriers and liposomes, and their investigations have demonstrated that they can limit cancer cell growth, reduce the risk of recurrence, as well as minimise post-chemotherapy metastasis. This article also explores FDA-approved lipid-based nanocarriers, commercially available formulations, and ligand-based formulations that are being considered for further research.

Lipid-based nanoparticles as drug delivery systems for cancer immunotherapy

Immune checkpoint inhibitors (ICIs) have shown remarkable success in cancer treatment. However, in cancer patients without sufficient antitumor immunity, numerous data indicate that blocking the negative signals elicited by immune checkpoints is ineffective. Drugs that stimulate immune activation-related pathways are emerging as another route for improving immunotherapy. In addition, the development of nanotechnology presents a promising platform for tissue and cell type-specific delivery and improved uptake of immunomodulatory agents, ultimately leading to enhanced cancer immunotherapy and reduced side effects. In this review, we summarize and discuss the latest developments in nanoparticles (NPs) for cancer immuno-oncology therapy with a focus on lipid-based NPs (lipid-NPs), including the characteristics and advantages of various types. Using the agonists targeting stimulation of the interferon genes (STING) transmembrane protein as an exemplar, we review the potential of various lipid-NPs to augment STING agonist therapy. Furthermore, we present recent findings and underlying mechanisms on how STING pathway activation fosters antitumor immunity and regulates the tumor microenvironment and provide a summary of the distinct STING agonists in preclinical studies and clinical trials. Ultimately, we conduct a critical assessment of the obstacles and future directions in the utilization of lipid-NPs to enhance cancer immunotherapy.

Development of Nanoemulsions for Topical Application of Mupirocin

Mupirocin (MUP) is a topical antibacterial agent used to treat superficial skin infections but has limited application due to in vivo inactivation and plasma protein binding. A nanoemulsion formulation has the potential to enhance the delivery of mupirocin into the skin. MUP-loaded nanoemulsions were prepared using eucalyptus oil (EO) or eucalyptol (EU), Tween^® 80 (T80) and Span^® 80 (S80) as oil phase (O), surfactant (S) and cosurfactant (CoS). The nanoemulsions were characterised and their potential to enhance delivery was assessed using an in vitro skin model. Optimised nanoemulsion formulations were prepared based on EO (MUP-NE EO) and EU (MUP-NE EU) separately. MUP-NE EO had a smaller size with mean droplet diameter of 35.89 ± 0.68 nm and narrower particle size index (PDI) 0.10 ± 0.02 nm compared to MUP-NE EU. Both nanoemulsion formulations were stable at 25 °C for three months with the ability to enhance the transdermal permeation of MUP as compared to the control, Bactroban^® cream. Inclusion of EU led to a two-fold increase in permeation of MUP compared to the control, while EO increased the percentage by 48% compared to the control. Additionally, more MUP was detected in the skin after 8 h following MUP-NE EU application, although MUP deposition from MUP-NE EO was higher after 24 h. It may be possible, through choice of essential oil to design nanoformulations for both acute and prophylactic management of topical infections.

Recent advances in Ti-based MOFs in biomedical applications

Currently, metal-organic frameworks (MOFs), basically inorganic-organic hybrid materials, have gained tremendous attention due to their vast applications. MOFs have shown enormous applications in almost every research field. However, the area of designing MOF materials for their biological applications is still an emerging field that needs attention. Titanium-based metal-organic framework (Ti-MOF) materials are used in many research areas due to their structural advantages, such as small particle size and large effective surface area. On the other hand, they have also shown unique advantages such as good biocompatibility, excellent catalytic oxidation and photocatalytic properties and ease of functionalization. This study reviews the recent research progress on Ti-MOFs in therapeutic areas such as antibacterial, oncology, anti-inflammation, and bone injury, which will provide new directions for further research in this biomedical field. Therefore, this article will help scientists working in the particular field to enhance their understanding of Ti-based MOFs for functional biomedical applications.

Simultaneous pulmonary administration of celecoxib and naringin using a nebulization-friendly nanoemulsion: A device-targeted delivery for treatment of lung cancer

BACKGROUND

Lung cancer is a principal cause of death worldwide, and its treatment is very challenging. Nebulization offers a promising means of targeting drugs to their site of action in the lung.

RESEARCH DESIGN AND METHODS

In the present study, nebulizable oil in water nanoemulsion formulations were co-loaded with naringin/celecoxib, and tested for pulmonary administration by different nebulizer types.

RESULTS

: The translucent appearance of nanoemulsion formulations was revealed, with particle size (75-106 nm), zeta potential (-3.42 to -4.86 mV), and controlled in-vitro release profiles for both drugs. The nanoemulsions showed favourable stability profiles, and superior cytotoxicity on A549 lung cancer cells. Aerosolization studies on the selected nanoemulsion formulation revealed its high stability during nebulization, with the generation of an aerosol of small volume median diameter, and mass median aerodynamic diameter lower than 5 µm. Moreover, it demonstrated considerable safety and bioaccumulation in lung tissues, in addition to accumulation in the brain, liver and bones which are the main organs to which lung cancer metastasizes.

CONCLUSIONS

Nanoemulsion proved to be a promising nebulizable system, which paves the way for treatment of pulmonary diseases other than lung cancer.

Recent Progress in Nanostructured Smart Drug Delivery Systems for Cancer Therapy: A Review

Traditional treatment approaches for cancer involve intravenous chemotherapy or other forms of drug delivery. These therapeutic measures suffer from several limitations such as nonspecific targeting, poor biodistribution, and buildup of drug resistances. However, significant technological advancements have been made in terms of superior modes of drug delivery over the last few decades. Technical capability in analyzing the molecular mechanisms of tumor biology, nanotechnology─particularly the development of biocompatible nanoparticles, surface modification techniques, microelectronics, and material sciences─has increased. As a result, a significant number of nanostructured carriers that can deliver drugs to specific cancerous sites with high efficiency have been developed. This particular maneuver that enables the introduction of a therapeutic nanostructured substance in the body by controlling the rate, time, and place is defined as the nanostructured drug delivery system (NDDS). Because of their versatility and ability to incorporate features such as specific targeting, water solubility, stability, biocompatibility, degradability, and ability to reverse drug resistance, they have attracted the interest of the scientific community, in general, and nanotechnologists as well as biomedical scientists. To keep pace with the rapid advancement of nanotechnology, specific technical aspects of the recent NDDSs and their prospects need to be reported coherently. To address these ongoing issues, this review article provides an overview of different NDDSs such as lipids, polymers, and inorganic nanoparticles. In addition, this review also reports the challenges of current NDDSs and points out the prospective research directions of these nanocarriers. From our focused review, we conclude that still now the most advanced and potent field of application for NDDSs is lipid-based, while other significantly potential fields include polymer-based and inorganic NDDSs. However, despite the promises, challenges remain in practical implementations of such NDDSs in terms of dosage and stability, and caution should be exercised regarding biocompatibility of materials. Considering these aspects objectively, this review on NDDSs will be particularly of interest for small-to-large scale industrial researchers and academicians with expertise in drug delivery, cancer research, and nanotechnology.

Layer-by-Layer Nanoparticles of Tamoxifen and Resveratrol for Dual Drug Delivery System and Potential Triple-Negative Breast Cancer Treatment

Nanoparticle development demonstrates use in various physicochemical, biological, and functional properties for biomedical applications, including anti-cancer applications. In the current study, a cancer therapeutic conjugate was produced consisting of tamoxifen (TAM) and resveratrol (RES) by layer-by-layer (LbL) nanoparticles based on lipid-based drug delivery systems and liquid crystalline nanoparticles (LCNPs) coated with multiple layers of positively charged chitosan and negatively charged hyaluronic acid for the evaluation of biocompatibility and therapeutic properties against cancer cells. Multiple techniques characterized the synthesis of TAM/RES-LbL-LCNPs, such as Fourier-transform infrared spectroscopy (FTIR), X-ray crystallography (XRD), Zeta potential analysis, particle size analysis, Field Emission Scanning Electron Microscope (FESEM), and Transmission electron microscopy (TEM). The in vitro cytotoxic effects of TAM/RES-LbL-LCNPs were investigated against human breast cancer cell line, Michigan Cancer Foundation-7 (MCF-7), and human triple-negative breast cancer cell line, Centre Antoine Lacassagne-51 (CAL-51), using various parameters. The 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay confirmed that the treatment of cells with TAM/RES-LbL-LCNPs caused a reduction in cell proliferation, and no such inhibition was observed with human normal liver cell line: American Type Culture Collection Cell Line-48 (WRL-68 [ATCC CL-48]). Fluorescent microscopy examined the ability of Fluorescein isothiocyanate (FITC) to bind to TAM/RES-LbL-LCNPs along with their cellular uptake. Apoptosis determination was performed using hematoxylin-eosin and acridine orange-propidium iodide double staining. The expression of P53 and caspase-8 was analyzed by flow cytometry analysis. An in vivo study determined the toxicity of TAM/RES-LbL-LCNPs in mice and assessed the functional marker changes in the liver and kidneys. No significant statistical differences were found for the tested indicators. TAM/RES-LbL-LCNP treatment showed no apparent damages or histopathological abnormalities in the heart, lung, liver, spleen, and kidney histological images. The current findings observed for the first time propose that TAM/RES-LbL-LCNPs provide a new and safer method to use phytochemicals in combinatorial therapy and provide a novel treatment approach against breast cancers.

Recent advances in nanosized metal organic frameworks for drug delivery and tumor therapy

Metal organic-frameworks (MOFs) are novel materials that have attracted increasing attention for applications in a wide range of research, owing to their unique advantages including their small particle size, porous framework structure and high specific surface area. Because of their adjustable size, nanoscale MOFs (nano-MOFs) can be prepared as carriers of biotherapy drugs, thus enabling biotherapeutic applications. Nano-MOFs' metal ion catalytic activity and organic group functional characteristics can be exploited in biological treatments. Furthermore, the applications of nano-MOFs can be broadened by hybridization with other materials to form composites. This review focuses on the preparation and recent advances in nano-MOFs as drug carriers, therapeutic materials and functionalized materials in drug delivery and tumor therapy based on the single/multiple stimulus response of drug release to achieve the targeted therapy, offering a comprehensive reference for drug carrier design. At the end, the current challenges and prospects are discussed to provide significant insight into the design and applications of nano-MOFs in drug delivery and tumor therapy.

Enhancement of oral bioavailability of drugs using lipid-based carriers: a meta-analysis study

Cancer is the disease of this era. Its therapy is moving through ups and downs not only due to poor effectiveness of many treating drugs, but also due to the serious side effects always evolving. In an attempt to overcome this problem, many systems, including lipid-based carriers, have been exploited for their oral delivery. Throughout this study, the meta-analysis tool was used to combine data from different studies and extract evidences that lipid-based carriers enhance the oral bioavailability. Consequently, increasing the efficiency and the reduction in side effects of drugs would follow. Accordingly, the usual parameter to indicate the bioavailability; the area under effect curve (AUC) was used where the lipid carriers have proven their superiority over conventional formulations. Interestingly, by comparing microemulsion/self-microemulsifying system (SMEDDS) versus liposomes/pro-liposomes as subgroups of the meta-analysis study, insignificant differences were recorded between them.

In-Vitro and In-Vivo Evaluation of Velpatasvir- Loaded Mesoporous Silica Scaffolds. A Prospective Carrier for Drug Bioavailability Enhancement

The limited aqueous solubility of many active pharmaceutical ingredients (APIs) is responsible for their poor performance and low drug levels in blood and at target sites. Various approaches have been adopted to tackle this issue. Most recently, mesoporous silica nanoparticles (MSN) have gained attention of pharmaceutical scientists for bio-imaging, bio-sensing, gene delivery, drug solubility enhancement, and controlled and targeted drug release. Here, we have successfully incorporated the poorly water soluble antiviral drug velpatasvir (VLP) in MSN. These spherical particles were 186 nm in diameter with polydispersity index of 0.244. Blank MSN have specific surface area and pore diameter of 602.5 ± 0.7 m2/g and 5.9 nm, respectively, which reduced after successful incorporation of drug. Drug was in amorphous form in synthesized VLP-loaded silica particles (VLP-MSN) with no significant interaction with carrier. Pure VLP showed poor dissolution with progressive increment in pH of dissolution media which could limit its availability in systemic circulation after oral administration. After VLP loading in silica carriers, drug released rapidly over a wide range of pH values, i.e., 1.2 to 6.8, thus indicating an improvement in the solubility profile of VLP. These particles were biocompatible, with an LD50 of 448 µg/mL, and in-vivo pharmacokinetic results demonstrated that VLP-MSN significantly enhanced the bioavailability as compared to pure drug. The above results clearly demonstrate satisfactory in-vitro performance, biocompatibility, non-toxicity and in-vivo bioavailability enhancement with VLP-MSN.

Novel Tamoxifen Nanoformulations for Improving Breast Cancer Treatment: Old Wine in New Bottles

Breast cancer (BC) is one of the leading causes of death from cancer in women; second only to lung cancer. Tamoxifen (TAM) is a hydrophobic anticancer agent and a selective estrogen modulator (SERM), approved by the FDA for hormone therapy of BC. Despite having striking efficacy in BC therapy, concerns regarding the dose-dependent carcinogenicity of TAM still persist, restricting its therapeutic applications. Nanotechnology has emerged as one of the most important strategies to solve the issue of TAM toxicity, owing to the ability of nano-enabled-formulations to deliver smaller concentrations of TAM to cancer cells, over a longer period of time. Various TAM-containing-nanosystems have been successfully fabricated to selectively deliver TAM to specific molecular targets found on tumour membranes, reducing unwanted toxic effects. This review begins with an outline of breast cancer, the current treatment options and a history of how TAM has been used as a combatant of BC. A detailed discussion of various nanoformulation strategies used to deliver lower doses of TAM selectively to breast tumours will then follow. Finally, a commentary on future perspectives of TAM being employed as a targeting vector, to guide the delivery of other therapeutic and diagnostic agents selectively to breast tumours will be presented.

Nanoemulsions Enhance in vitro Transpapillary Diffusion of Model Fluorescent Dye Nile Red

While the feasibility of transpapillary drug delivery has previously been established, localized transport via the mammary ducts may be improved with tailored drug delivery formulations. The objective of this study was to investigate the impact of nanoemulsion encapsulation on transpapillary delivery in vitro. Nanoemulsion formulations composed of isopropyl myristate and Tween 80 encapsulating a fluorescent dye were applied topically on porcine nipples using a Franz diffusion cell. A combination of dye extraction and fluorescence image analysis was used to quantify the total amount of dye retained within the nipple and to characterize the penetration routes. After diffusion for 6 hours, the amount of dye deposited in the nipple was proportional to the formulation’s water concentration. The 90% water formulation deposited significantly more dye via both the stratum corneum and mammary ducts, while the 80% and 70% water formulations moderately increased ductal penetration, but minimally altered stratum corneum penetration as compared to the control solution. Similar trends were found after diffusion for 48 hours; however, the overall impact was diminished, likely due to the nanoemulsion’s topical instability. This study indicates that drug delivery vehicles, nanoemulsions specifically, enhance delivery of encapsulated molecules via the stratum corneum and mammary ducts in a formulation-dependent basis.

Biopharmaceutical insights of particulate emulsified systems - a prospective overview

During the twenty-first century, drug discovery is expanding rapidly and a large number of chemical moieties are recognized. Many of them are poorly soluble and hence related biopharmaceutical constraints are to be addressed systematically. Among novel approaches to resolving biopharmaceutical issues, micro- and nano-emulsified systems serve as the best strategy for delivering both hydrophobic and hydrophilic drugs owing to their greater solubilization and transportation capabilities. Of late, the unique physical and biopharmaceutical properties of these liquid isotropic homogenous systems have gained substantive research importance. In addition nano/micro lipid systems share structural and functional similarity with that of the physiological lipids which offer better tolerance ability in the body. In this context, this article provides information on the historical emergence of particulate emulsified systems, importance and rationale of selection of carriers. It also encompasses the physicochemical principles that are responsible for the elevation of therapeutic outcomes of delivery systems. Detailed and schematic absorption of these drug delivery systems is explained here. Gastro-intestinal biochemistry necessary in the understanding of digestion process, lipolytic products formed, micellar structures, enzymes, transporters, mechanism of cell uptake involved after subsequent oral absorption are also emphasized. In addition, this article also explains disposition and pharmacokinetic properties of emulsified systems with real-time therapeutic research outcomes. The influence of biochemical compositions and biopharmaceutical principles on absorption and disposition patterns of ME/NEs was described in the article for the interest of readers and young researchers.

Highlights in nanocarriers for the treatment against cervical cancer

Cervical cancer is the second most common malignant tumor in women worldwide and has a high mortality rate, especially when it is associated with human papillomavirus (HPV). In US, an estimated 12,820 cases of invasive cervical cancer and an estimated 4210 deaths from this cancer will occur in 2017. With rare and very aggressive conventional treatments, one sees in the real need of new alternatives of therapy as the delivery of chemotherapeutic agents by nanocarriers using nanotechnology. This review covers different drug delivery systems applied in the treatment of cervical cancer, such as solid lipid nanoparticles (SNLs), liposomes, nanoemulsions and polymeric nanoparticles (PNPs). The main advantages of drug delivery thus improving pharmacological activity, improving solubility, bioavailability to bioavailability reducing toxicity in the target tissue by targeting of ligands, thus facilitating new innovative therapeutic technologies in a too much needed area. Among the main disadvantage is the still high cost of production of these nanocarriers. Therefore, the aim this paper is review the nanotechnology based drug delivery systems in the treatment of cervical cancer.

Nanoemulsion: Concepts, development and applications in drug delivery

Nanoemulsions are biphasic dispersion of two immiscible liquids: either water in oil (W/O) or oil in water (O/W) droplets stabilized by an amphiphilic surfactant. These come across as ultrafine dispersions whose differential drug loading; viscoelastic as well as visual properties can cater to a wide range of functionalities including drug delivery. However there is still relatively narrow insight regarding development, manufacturing, fabrication and manipulation of nanoemulsions which primarily stems from the fact that conventional aspects of emulsion formation and stabilization only partially apply to nanoemulsions. This general deficiency sets up the premise for current review. We attempt to explore varying intricacies, excipients, manufacturing techniques and their underlying principles, production conditions, structural dynamics, prevalent destabilization mechanisms, and drug delivery applications of nanoemulsions to spike interest of those contemplating a foray in this field.

Nanoemulsions: formation, properties and applications

Nanoemulsions are kinetically stable liquid-in-liquid dispersions with droplet sizes on the order of 100 nm. Their small size leads to useful properties such as high surface area per unit volume, robust stability, optically transparent appearance, and tunable rheology. Nanoemulsions are finding application in diverse areas such as drug delivery, food, cosmetics, pharmaceuticals, and material synthesis. Additionally, they serve as model systems to understand nanoscale colloidal dispersions. High and low energy methods are used to prepare nanoemulsions, including high pressure homogenization, ultrasonication, phase inversion temperature and emulsion inversion point, as well as recently developed approaches such as bubble bursting method. In this review article, we summarize the major methods to prepare nanoemulsions, theories to predict droplet size, physical conditions and chemical additives which affect droplet stability, and recent applications.

Phase inversion emulsification: Current understanding and applications

This review is addressed to the phase inversion process, which is not only a common, low-energy route to make stable emulsions for a variety of industrial products spanning from food to pharmaceuticals, but can also be an undesired effect in some applications, such as crude oil transportation in pipelines. Two main ways to induce phase inversion are described in the literature, i.e., phase inversion composition (PIC or catastrophic) and phase inversion temperature (PIT or transitional). In the former, starting from one phase (oil or water) with surfactants, the other phase is more or less gradually added until it reverts to the continuous phase. In PIT, phase inversion is driven by a temperature change without varying system composition. Given its industrial relevance and scientific challenge, phase inversion has been the subject of a number of papers in the literature, including extensive reviews. Due to the variety of applications and the complexity of the problem, most of the publications have been focused either on the phase behavior or the interfacial properties or the mixing process of the two phases. Although all these aspects are quite important in studying phase inversion and much progress has been done on this topic, a comprehensive picture is still lacking. In particular, the general mechanisms governing the inversion phenomenon have not been completely elucidated and quantitative predictions of the phase inversion point are limited to specific systems and experimental conditions. Here, we review the different approaches on phase inversion and highlight some related applications, including future and emerging perspectives.

Nature of the charged head group dictates the anticancer potential of lithocholic acid-tamoxifen conjugates for breast cancer therapy

Anticancer drug Tamoxifen is modified to charged lithocholic acid derived amphiphile for enhanced cytotoxicity against breast cancer cells.

Cavitation technology - a greener processing technique for the generation of pharmaceutical nanoemulsions

Novel nanoemulsion-based drug delivery systems (DDS) have been proposed as alternative and effective approach for the delivery of various types of poorly water-soluble drugs in the last decade. This nanoformulation strategy significantly improves the cell uptake and bioavailability of numerous hydrophobic drugs by increasing their solubility and dissolution rate, maintaining drug concentration within the therapeutic range by controlling the drug release rate, and reducing systemic side effects by targeting to specific disease site, thus offering a better patient compliance. To date, cavitation technology has emerged to be an energy-efficient and promising technique to generate such nanoscale emulsions encapsulating a variety of highly potent pharmaceutical agents that are water-insoluble. The micro-turbulent implosions of cavitation bubbles tear-off primary giant oily emulsion droplets to nano-scale, spontaneously leading to the formation of highly uniform drug contained nanodroplets. A substantial body of recent literatures in the field of nanoemulsions suggests that cavitation is a facile, cost-reducing yet safer generation tool, remarkably highlighting its industrial commercial viability in the development of designing novel nanocarriers or enhancing the properties of existing pharmaceutical products. In this review, the fundamentals of nanoemulsion and the principles involved in their formation are presented. The underlying mechanisms in the generation of pharmaceutical nanoemulsion under acoustic field as well as the advantages of using cavitation compared to the conventional techniques are also highlighted. This review focuses on recent nanoemulsion-based DDS development and how cavitation through ultrasound and hydrodynamic means is useful to generate the pharmaceutical grade nanoemulsions including the complex double or submicron multiple emulsions.

Nanoemulsions in translational research-opportunities and challenges in targeted cancer therapy

Nanoemulsion dosage form serves as a vehicle for the delivery of active pharmaceutical ingredients and has attracted great attention in drug delivery and pharmacotherapy. In particular, nanoemulsions act as an excellent vehicle for poorly aqueous soluble drugs, which are otherwise difficult to formulate in conventional dosage forms. Nanoemulsions are submicron emulsions composed of generally regarded as safe grade excipients. Particle size at the nanoscale and larger surface area lead to some very interesting physical properties that can be exploited to overcome anatomical and physiological barriers associated in drug delivery to the complex diseases such as cancer. Along these lines, nanoemulsions have been engineered with specific attributes such as size, surface charge, prolonged blood circulation, target specific binding ability, and imaging capability. These attributes can be tuned to assist in delivering drug/imaging agents to the specific site of interest, based on active and passive targeting mechanisms. This review focuses on the current state of nanoemulsions in the translational research and its role in targeted cancer therapy. In addition, the production, physico-chemical characterization, and regulatory aspects of nanoemulsion are addressed.

TGF-β1 conjugated to gold nanoparticles results in protein conformational changes and attenuates the biological function

Gold nanoparticles (AuNPs) are widely used as carriers or therapeutic agents due to their great biocompatibility and unique physical properties. Transforming growth factor-beta 1 (TGF-β1), a member of the cysteine-knot structural superfamily, plays a pivotal role in many diseases and is known as an immunosuppressive agent that attenuates immune response resulting in tumor growth. The results reported herein reflect strong interactions between TGF-β1 and the surface of AuNPs when incubated with serum-containing medium, and demonstrate a time- and dose-dependent pattern. Compared with other serum proteins that can also bind to the AuNP surface, AuNP-TGFβ1 conjugate is a thermodynamically favored compound. Epithelial cells undergo epithelial-mesenchymal transition (EMT) upon treatment with TGF-β1; however, treatment with AuNPs reverses this effect, as detected by cell morphology and expression levels of EMT markers. TGF-β1 is found to bind to AuNPs through S-Au bonds by X-ray photoelectron spectroscopy. Fourier transform infrared spectroscopy is employed to analyze the conformational changes of TGF-β1 on the surface of AuNPs. The results indicate that TGF-β1 undergoes significant conformational changes at both secondary and tertiary structural levels after conjugation to the AuNP surface, which results in the deactivation of TGF-β1 protein. An in vivo experiment also shows that addition of AuNPs attenuates the growth of TGF-β1-secreting murine bladder tumor 2 cells in syngeneic C3H/HeN mice, but not in immunocompromised NOD-SCID mice, and this is associated with an increase in the number of tumor-infiltrating CD4⁺ and CD8⁺ T lymphocytes and a decrease in the number of intrasplenic Foxp3(+) lymphocytes. The findings demonstrate that AuNPs may be a promising agent for modulating tumor immunity through inhibiting immunosuppressive TGF-β1 signaling.

An excellent delivery system for improving the oral bioavailability of natural vitamin E in rats

This study set out to develop a novel and stable nanoemulsion formulation of natural vitamin E with increased oral bioavailability. The natural vitamin E nanoemulsion was prepared by a modified emulsification technique. The physicochemical characteristics of natural vitamin E nanoemulsion were characterized and its pharmacokinetics study was performed as well. The experimental results showed droplet diameters ranging from 20 to 400 nm (average, 87.7 nm) with a negative electrostatic potential (-23.5 ± 1.5 mv). The pharmacokinetics study of this nanoemulsion and corresponding soft capsule was carried out using noncompartment model method. Compared with the marketed soft capsule, the C (max) of the natural vitamin E nanoemulsion was higher, while the T (max) was shorter. Thus, plasma concentration-time profiles in rats dosed with nanoemulsion showed a 1.6-fold enhancement in the area under the curve of natural vitamin E compared with the marketed soft capsule. The antioxidative effects of the natural vitamin E nanoemulsion and the marketed soft capsule were also evaluated by the levels of superoxide dismutase (SOD) activity and malondialdehyde (MDA) concentration in serum and liver tissue. According to the SOD activity and the MDA concentration determined, the nanoemulsion was superior to the marketed soft as an antioxidative agent. The overall results demonstrated that the nanoemulsion drug delivery system could be a promising strategy for the delivery of natural vitamin E, which showed great potential for clinical application.

Targeted nanoparticulate drug-delivery systems for treatment of solid tumors: a review

Technological advancements in the field of biomaterials, polymer chemistry and drug-delivery techniques have aided the development of a number of new drug-delivery systems for targeting to solid tumors. Numerous research groups have explored the possibility of utilizing tumor-specific drug-delivery systems using nanoparticles. In this review we have attempted to highlight the achievements of some research groups actively involved in nanoparticulate drug delivery systems. The manuscript presents an in-depth discussion for nanoparticle systems such as micelles, liposomes, dendrimers, nanoemulsion, solid lipid nanoparticles and carbon fullerenes as chemotherapeutic options. The review reiterates the importance of the basic fundamentals of targeted drug delivery using nanoparticles and the influence of physiological parameters on their efficacy.

Improvement of drug safety by the use of lipid-based nanocarriers

Drug toxicity is an important factor that contributes significantly to adverse drug events in current healthcare practice. Application of lipid-based nanocarriers in drug formulation is one approach to improve drug safety. Lipid-based delivery systems include micelles, liposomes, solid lipid nanoparticles, nanoemulsions and nanosuspensions. These carriers are generally composed of physiological lipids well tolerated by human body. Delivery of water-insoluble drugs in these formulations increases their solubility and stability in aqueous media and eliminates the need for toxic co-solvents or pH adjustment to solubilize hydrophobic drugs. Association or encapsulation of peptides/proteins within lipid-based carriers protects the labile biologics against enzymatic degradation, hence reducing the therapeutic dose required and risk of dose-dependent toxicity. Most importantly, lipid-based nanocarriers alter the pharmacokinetics and biodistribution of drugs through passive and active targeting, leading to increased drug accumulation at target sites while significantly decreasing non-specific distribution to other tissues. Furthermore, surface modification of these nanocarriers reduces immunogenicity of drug-carrier complexes, imparts stealth by preventing opsonization and removal by phagocytes and minimizes interaction with circulating blood components. In view of heightening attention on drug safety in patient treatment, lipid-based nanocarrier is therefore an important and promising option for formulation of pharmaceutical products to improve treatment safety and efficacy.

Development, characterization, and in vitro evaluation of tamoxifen microemulsions

Microemulsions (MEs) were designed by an innovative rational development, characterized, and used to load up to 20 mM of Tamoxifen citrate (TMX). They were made with acceptable and well-characterized excipients for all the routes of administration. Some of their properties, such as nanometric mean size and long stability shelf life, make them interesting drug delivery systems. The results obtained after the in vitro inhibition of estradiol-induced proliferation in MCF-7 breast cancer cells demonstrated a significant effect in cell growth. A decreasing of at least 90% in viable cells was shown after the incubation with MEs containing 20 mM of TMX. Besides, two compositions which loaded 10 mM of drug showed a cytotoxic effect higher than 70%. These results encourage the evaluation of alternative protocols for this drug administration, not only for estrogen receptor (ER) positive tumors, but also for ER negative.

Encapsulation of cadmium selenide quantum dots using a self-assembling nanoemulsion (SANE) reduces their in vitro toxicity

Although, nanometer-scale semi-conductor quantum dots (QDs) have attracted widespread interest in medical diagnosis and treatment, many can have intrinsic toxicities, especially those composed of CdSe, associated with their elemental composition. Using our self-assembling nanoemulsion (SANE) formulations which we have previously reported to be composed of non-toxic components, i.e., such as vegetable oil, surfactant and water, we hypothesized that their appropriate utilization would reduce the toxicity of QDs by encapsulating the CdSe QDs in our (SANE) system using a modified phase-inversion temperature (PIT) method. SANE encapsulation of the QDs did not alter their emission wavelength of 600nm which remained unchanged during the encapsulation process. In contrast, zeta potential of encapsulated QDs was reduced from -30 to -6.59 mV, which we have previously reported to be associated with beneficial properties (increased bioavailability and efficacy) for SANE-encapsulated bioactives such as pharmaceuticals. Relative to the untreated controls, the viability of HeLa cells exposed for 48 h to un-encapsulated CdSe QDs at a concentration of 115 μg/mL was 22.7±1.7% (p<0.05). In contrast, the percentage of viable HeLa cells following exposure to SANE-encapsulated CdSe QDs at the same concentration was 91.6±3.5% (p<0.05) or a 307% increase in the number of viable cells (p<0.05). When the dose of CdSe QDs was increased to 230 μg/mL, the percentage of viable HeLa cells after exposure to the un-encapsulated CdSe QDs was 16.1±1.3% compared to controls (p<0.05). In contrast, at the same increased concentration (230 μg/mL) of un-encapsulated CdSe QDs, the percentage of viable HeLa cells following exposure to SANE-encapsulated CdSe QDs was 87.9±3.3% relative to controls (p<0.05) or a 448% increase in the number of viable cells (p<0.05). Exposure of HeLa cells to a nanoblank, (nanoemulsion without QDs), showed no significant effect on cell viability (97.2±2.5%) compared to control cell culture. In conclusion, application of our SANE technology for encapsulating QDs increased cell viability of cells exposed to CdSe QDs while maintaining the original emission wavelength and therefore may be applied to reduce QD toxicity.

Analysis of interaction between tamoxifen and ctDNA in vitro by multi-spectroscopic methods

Multi-spectroscopic methods including resonance light scattering (RLS), ultraviolet spectra (UV), fluorescence spectra, (1)H NMR spectroscopy, coupled with thermo-denaturation experiments were firstly used to study the interaction of antitumor drug tamoxifen (TMX) with calf thymus (ctDNA) in acetate buffer solutions (pH 4.55). The interaction of TMX with ctDNA could cause a significant enhancement of RLS intensity, the hyperchromic effect, red shift of absorption spectra and the fluorescence quenching of TMX, indicating that there is an inserting interaction between TMX and ctDNA. This inference was confirmed by (1)H NMR spectroscopy. The chemical shift of the benzene proton changes significantly which indicates that TMX could insert into the base pairs of ctDNA. These studies are valuable for a better understanding the mode of TMX-ctDNA interaction further, which are important and useful for designing of new ctDNA targeted drug. And the antitumor drug TMX inserted directly into ctDNA in vitro, which can provide a lot of useful information to explore the development of new and highly effective anti-cancer drugs.