Direct Synthesis of Vinylidene Fluoride-Based Amphiphilic Diblock Copolymers by RAFT/MADIX Polymerization

Highly Alternating Copolymer of [1.1.1]Propellane and Perfluoro Vinyl Ether: Forming a Hydrophobic and Oleophobic Surface with <50% Fluorine Monomer Content

Utilizing the unique properties of fluorine substitution is an effective strategy for constructing highly functional materials. Here, we synthesized a novel copolymer composed of [1.1.1]propellane and perfluoro(propyl vinyl ether) (PPVE), rich in alternating sequences. The spin-coated copolymer film was amorphous, and its surface exhibited an extremely low surface free energy (γ). The γ value was lower than that of polytetrafluoroethylene despite containing only 40 mol % PPVE units. This can be attributed to the cancellation of the C-F dipole moments by the entirely random orientation of the fluorine units.

Controlled Radical Copolymerization toward Well-Defined Fluoropolymers

In the past 80 years, fluoropolymers have found broad applications in both industrial and academic settings, owing to their unique physicochemical properties. Copolymerizations of fluoroalkene feedstocks present an important avenue to obtain high-performance materials by merging intrinsic attributes of fluorocarbons and great versatility of comonomers. Recently, while massive investigations have disclosed the great potentials of precisely synthesized polymers, researchers have made considerable efforts to approach well-defined fluorinated copolymers. This minireview discusses challenges in controlled radical copolymerizations (CRCPs) of fluoroalkenes and provides a concise perspective on recent progress in CRCPs of fluoroalkenes (e.g., tetrafluoroethylene, chlorotrifluoroethylene, hexafluoropropene, perfluoroalkyl vinyl ethers) with non-fluorinated vinyl comonomers, which have enabled on-demand preparations of various main-chain fluoropolymers with predefined molar masses, low dispersities, as well as regulable chemical compositions and sequences. The synthetic advantages of CRCPs will promote controlled and facile access to customized fluoropolymers for high-tech applications such as batteries, coatings and so on.

Fluoropolymer Nanoparticles Synthesized via Reversible-Deactivation Radical Polymerizations and Their Applications

Fluorinated polymeric nanoparticles (FPNPs) combine unique properties of fluorocarbon and polymeric nanoparticles, which has stimulated massive interest for decades. However, fluoropolymers are not readily available from nature, resulting in synthetic developments to obtain FPNPs via free radical polymerizations. Recently, while increasing cutting-edge directions demand tailored FPNPs, such materials have been difficult to access via conventional approaches. Reversible-deactivation radical polymerizations (RDRPs) are powerful methods to afford well-defined polymers. Researchers have applied RDRPs to the fabrication of FPNPs, enabling the construction of particles with improved complexity in terms of structure, composition, morphology, and functionality. Related examples can be classified into three categories. First, well-defined fluoropolymers synthesized via RDRPs have been utilized as precursors to form FPNPs through self-folding and solution self-assembly. Second, thermally and photoinitiated RDRPs have been explored to realize in situ preparations of FPNPs with varied morphologies via polymerization-induced self-assembly and cross-linking copolymerization. Third, grafting from inorganic nanoparticles has been investigated based on RDRPs. Importantly, those advancements have promoted studies toward promising applications, including magnetic resonance imaging, biomedical delivery, energy storage, adsorption of perfluorinated alkyl substances, photosensitizers, and so on. This Review should present useful knowledge to researchers in polymer science and nanomaterials and inspire innovative ideas for the synthesis and applications of FPNPs.

Cobalt-Mediated Radical Copolymerization of Vinylidene Fluoride and 2,3,3,3-Trifluoroprop-1-ene

New copolymers based on vinylidene fluoride (VDF) and 2,3,3,3-tetrafluoroprop-1-ene (1234yf) were synthesized by organometallic-mediated radical copolymerization (OMRcP) using the combination of bis(tert-butylcyclohexyl) peroxydicarbonate initiator and bis(acetylacetonato)cobalt(II), (Co(acac)2) as a controlling agent. Kinetics studies of the copolymerization of the fluoroalkenes copolymers were monitored by GPC and 19F NMR with molar masses up to 12,200 g/mol and dispersities (Đ) ranging from 1.33 to 1.47. Such an OMRcP behaves as a controlled copolymerization, evidenced by the molar mass of the resulting copolymer-monomer conversion linear relationship. The reactivity ratios, ri, of both comonomers were determined by using the Fineman-Ross and Kelen-Tüdos fitting model leading to rVDF = 0.384 ± 0.013 and r1234yf = 2.147 ± 0.129 at 60 °C, showing that a lower reactivity of VDF integrated in the copolymer to a greater extent leads to the production of gradient or pseudo-diblock copolymers. In addition, the Q (0.03) and e (0.06 and 0.94) parameters were assessed, as well as the dyad statistic distributions and mean square sequence lengths of PVDF and P1234yf.

Mechanistic insights into the formation of polyion complex aggregates from cationic thermoresponsive diblock copolymers

HYPOTHESIS

The formation of polyion complexes (PICs) comprising thermoresponsive polymers is intended to result in the formation of aggregates that undergo significant structural changes with temperature. Moreover the observed modifications might be critically affected by polymer structure and PICs composition.

EXPERIMENTS

Different block copolymers based on cationic poly(3-acrylamidopropyltrimethylammonium chloride) and thermoresponsive poly(N-isopropylacrylamide) were synthesized by aqueous RAFT/MADIX polymerization at room temperature. Addition of poly(acrylic acid) in a controlled fashion led to the formation of PICs aggregates. The structural changes induced by temperature were characterized by differential scanning calorimetry, Nuclear Magnetic Resonance spectroscopy and scattering methods.

FINDINGS

Thermoresponsive PICs undergo significant structural changes when increasing temperature above the cloud point of the thermoresponsive block. The reversibility of these phenomena depends strongly on the structural parameters of the block copolymers and on PICs composition.

Preparation of well-defined 2D-lenticular aggregates by self-assembly of PNIPAM-b-PVDF amphiphilic diblock copolymers in solution

PNIPAM-b-PVDF amphiphilic block copolymers were synthesized via RAFT polymerization in dimethyl carbonate. These block copolymers were able to self-assemble into various morphologies such as spherical, crumpled, lamellar and lenticular 2D aggregates.

NMR investigations of polytrifluoroethylene (PTrFE) synthesized by RAFT

Identification of the ¹H, ¹⁹F, and ¹³C NMR signals of the end-groups of polytrifluoroethylene synthesized by RAFT polymerisation.

Fluoroalkyl Pentacarbonylmanganese(I) Complexes as Initiators for the Radical (co)Polymerization of Fluoromonomers

The use of [Mn(RF)(CO)5] (RF = CF3, CHF2, CH2CF3, COCF2CH3) to initiate the radical polymerization of vinylidene fluoride (F2C=CH2, VDF) and the radical alternating copolymerization of vinyl acetate (CH2=CHOOCCH3, VAc) with tert-butyl 2-(trifluoromethyl)acrylate (MAF-TBE) by generating primary RF• radicals is presented. Three different initiating methods with [Mn(CF3)(CO)5] (thermal at ca. 100 °C, visible light and UV irradiations) are described and compared. Fair (60%) to satisfactory (74%) polyvinylidene fluoride (PVDF) yields were obtained from the visible light and UV activations, respectively. Molar masses of PVDF reaching 53,000 g·mol-1 were produced from the visible light initiation after 4 h. However, the use of [Mn(CHF2)(CO)5] and [Mn(CH2CF3)(CO)5] as radical initiators produced PVDF in a very low yield (0 to 7%) by both thermal and photochemical initiations, while [Mn(COCF2CH3)(CO)5] led to the formation of PVDF in a moderate yield (7% to 23%). Nevertheless, complexes [Mn(CH2CF3)(CO)5] and [Mn(COCHF2)(CO)5] efficiently initiated the alternating VAc/MAF-TBE copolymerization. All synthesized polymers were characterized by 1H and 19F NMR spectroscopy, which proves the formation of the expected PVDF or poly(VAc-alt-MAF-TBE) and showing the chaining defects and the end-groups in the case of PVDF. The kinetics of VDF homopolymerization showed a linear ln[M]0/[M] versus time relationship, but a decrease of molar masses vs. VDF conversion was noted in all cases, which shows the absence of control. These PVDFs were rather thermally stable in air (up to 410 °C), especially for those having the highest molar masses. The melting points ranged from 164 to 175 °C while the degree of crystallinity varied from 44% to 53%.

A New Strategy for the Synthesis of Fluorinated Polyurethane

An alternating fluorinated copolymer based on chlorotrifluoroethylene (CTFE) and butyl vinyl ether (BVE) was synthesized by RAFT/MADIX living/controlled polymerization in the presence of S-benzyl O-ethyl dithiocarbonate (BEDTC). Then, using the obtained poly(CTFE-alt-BVE) as a macro chain transfer agent (macro-CTA), a block copolymer was prepared by chain extension polymerization of vinyl acetate (VAc). After a basic methanolysis process, the poly(vinyl acetate) (PVAc) block was transferred into poly(vinyl alcohol) (PVA). Finally, a novel fluorinated polyurethane with good surface properties due to the mobility of the flexible fluorinated polymer chains linked to the network was obtained via reaction of the copolymer bearing the blocks of PVA with isophorone diisocyanate (IPDI) as a cross-linking agent.

Grafting of Polymer Brushes from Xanthate-Functionalized Silica Particles

Monodisperse silica particles (SiPs) were surface-modified with a newly designed silane coupling agent comprising a triethoxysilane and an alkyl halide, namely, 6-(triethoxysilyl)hexyl 2-bromopropionate, which was further treated with potassium O-ethyl dithiocarbonate (PEX) to immobilize xanthate molecules on the particle surfaces. Surface-initiated macromolecular design via interchange of xanthates (MADIX) polymerization of vinyl acetate (VAc) was conducted with the xanthate-functionalized SiPs. The polymerization was well controlled and produced SiPs coated with poly(vinyl acetate) (PVAc) with a well-defined target molar mass and a graft density of about 0.2 chains nm^-2 . Dynamic light scattering and TEM measurements revealed that the hybrid particles were highly dispersible in good solvents without any aggregation. The PVAc brushes were hydrolyzed with hydrochloric acid to produce poly(vinyl alcohol) brushes on the SiP surfaces. In addition, the number of xanthate molecules introduced on the SiP surfaces could be successfully controlled by adjusting the concentration of PEX. Thus, the SiPs have two functionalities: xanthates able to act as a MADIX chain-transfer agent and alkyl bromide initiation sites for atom transfer radical polymerization (ATRP). By using these unique bifunctional particles, mixed polymer brushes were constructed on the SiPs by MADIX of VAc followed by ATRP of styrene or methyl methacrylate.

Cobalt-Mediated Radical Copolymerization of Chlorotrifluoroethylene and Vinyl Acetate

Controlled radical copolymerization of chlorotrifluoroethylene (CTFE) and vinyl acetate (VAc) was successfully achieved in the presence of bis(acetylacetonato)cobalt(II) (Co(acac)₂) as a mediated agent and 2,2'-azo-bis-isobutyronitrile (AIBN) as initiator. Both the molar mass and the fluorinated unit content of the copolymer could be controlled, and the chain extension polymerization of the obtained fluorinated copolymer was also achieved.

Determination of head addition incidence of (meth)acrylate and styrene in radical polymerization by RAFT block polymerization derivation and gradient polymer elution chromatography

Head addition incidences in RAFT polymerization can be calculated by a combination technology of RAFT block polymerization derivation and GPEC.

Core–shell structured poly(vinylidene fluoride)-grafted-BaTiO3 nanocomposites prepared via reversible addition–fragmentation chain transfer (RAFT) polymerization of VDF for high energy storage capacitors

Core–shell structured PVDF-g-BaTiO₃ nanocomposites were prepared by surface-initiated RAFT of VDF from BaTiO₃ nanoparticles.

Kinetic Monte Carlo Simulation Based Detailed Understanding of the Transfer Processes in Semi-Batch Iodine Transfer Emulsion Polymerizations of Vinylidene Fluoride

Semi-batch emulsion polymerizations of vinylidene fluoride (VDF) are reported. The molar mass control is achieved via iodine transfer polymerization (ITP) using IC₄F₈I as chain transfer agent. Polymerizations carried out at 75 °C and pressures ranging from 10 to 30 bar result in low dispersity polymers with respect to the molar mass distribution (MMD). At higher pressures a significant deviation from the ideal behavior expected for a reversible deactivation transfer polymerization occurs. As identified by kinetic Monte Carlo (kMC) simulations of the activation⁻deactivation equilibrium, during the initialization period of the chain transfer agent already significant propagation occurs due to the higher pressure, and thus, the higher monomer concentration available. Based on the kMC modeling results, semi-batch emulsion polymerizations were carried out as a two pressure process, which resulted in very good control of the MMD associated with a comparably high polymerization rate.

Organometallic-Mediated Radical Polymerization of Vinylidene Fluoride

An unprecedented level of control for the radical polymerization of vinylidene fluoride (VDF), yielding well-defined PVDF (at least up to 14 500 g mol^-1 ) with low dispersity (≤1.32), was achieved using organometallic-mediated radical polymerization (OMRP) with an organocobalt compound as initiator. The high chain-end fidelity was demonstrated by the synthesis of PVDF- and PVAc-containing di-and triblock copolymers. DFT calculations rationalize the efficient reactivation of both head and tail chain end dormant species.

Kinetics of radical copolymerization of vinylidene fluoride with tert-butyl 2-trifluoromethyl acrylate: a suitable pair for the synthesis of alternating fluorinated copolymers

A study of the copolymerization kinetics of vinylidene fluoride with tert-butyl 2-trifluoromethyl acrylate: a suitable pair for the synthesis of alternating fluorinated copolymers.

Inducing β Phase Crystallinity in Block Copolymers of Vinylidene Fluoride with Methyl Methacrylate or Styrene

Block copolymers of poly(vinylidene fluoride) (PVDF) with either styrene or methyl methacrylate (MMA) were synthesized and analyzed with respect to the type of the crystalline phase occurring. PVDF with iodine end groups (PVDF-I) was prepared by iodine transfer polymerization either in solution with supercritical CO₂ or in emulsion. To activate all iodine end groups Mn₂(CO)10 is employed. Upon UV irradiation Mn(CO)₅ radicals are obtained, which abstract iodine from PVDF-I generating PVDF radicals. Subsequent polymerization with styrene or methyl methacrylate (MMA) yields block copolymers. Size exclusion chromatography and NMR results prove that the entire PVDF-I is converted. XRD, FT-IR, and differential scanning calorimetry (DSC) analyses allow for the identification of crystal phase transformation. It is clearly shown that the original α crystalline phase of PVDF-I is changed to the β crystalline phase in case of the block copolymers. For ratios of the VDF block length to the MMA block length ranging from 1.4 to 5 only β phase material was detected.

Insight into the polymerization mechanism of photoinduced step transfer-addition & radical-termination (START) polymerizations

The intrinsic polymerization mechanism of photoinduced step transfer-addition & radical-termination (START) has been revealed based on the successful construction of a catalytic system (Ru(bpy)₃Cl₂/RA) and a solvent system (DMC/MeCN).

Well-defined multiblock poly(vinylidene fluoride) and block copolymers thereof: a missing piece of the architecture puzzle

Multiblock poly(vinylidene fluoride) (PVDF) synthesized by RAFT polymerization mediated by cyclic xanthate was used to prepare novel PVDF-based block copolymers.

Determination and correlation of regioselectivity and dead dormant species from head addition in acrylate RAFT polymerization

The dead dormant species from head addition in a RAFT process can be separated and quantified by combining chain-extension and GPEC.

An amphiphilic poly(vinylidene fluoride)-b-poly(vinyl alcohol) block copolymer: synthesis and self-assembly in water

This study is the first report of the synthesis and self-assembly in water of an amphiphilic PVDF-b-PVA block copolymer.

Structure-Property Relationships in CO2-philic (Co)polymers: Phase Behavior, Self-Assembly, and Stabilization of Water/CO2 Emulsions

This Review provides comprehensive guidelines for the design of CO2-philic copolymers through an exhaustive and precise coverage of factors governing the solubility of different classes of polymers. Starting from computational calculations describing the interactions of CO2 with various functionalities, we describe the phase behavior in sc-CO2 of the main families of polymers reported in literature. The self-assembly of amphiphilic copolymers of controlled architecture in supercritical carbon dioxide and their use as stabilizers for water/carbon dioxide emulsions then are covered. The relationships between the structure of such materials and their behavior in solutions and at interfaces are systematically underlined throughout these sections.

Photomediated Controlled Radical Polymerization and Block Copolymerization of Vinylidene Fluoride

This review summarizes recent research on novel photochemical methods for the initiation and control of the polymerization of main chain fluorinated monomers as exemplified by vinylidene fluoride (VDF) and for the synthesis of their block copolymers. Such reactions can be carried out at ambient temperature in glass tubes using visible light. Novel, original protocols include the use of hypervalent iodide carboxylates alone or in conjunction with molecular iodine, as well as the use of photoactive transition metal carbonyls in the presence of alkyl, fluoroalkyl, and perfluoroalkyl halides. An in-depth study of the reaction parameters highlights the use of dimethyl carbonate as a preferred polymerization solvent and outlines the structure-property relationship for hypervalent iodide carboxylates and halide initiators in both the free radical and iodine degenerative transfer controlled radical polymerization (IDT-CRP) of VDF. Finally, the rational selection of metal carbonyls that are successful not only as IDT mediators but, more importantly, in the quantitative activation of both PVDF-CH2-CF2-I and PVDF-CF2-CH2-I chain ends toward the synthesis of well-defined PVDF block copolymers is presented.

RAFT synthesis of well-defined PVDF-b-PVAc block copolymers

This article reports that PVDF-b-PVAc diblock copolymers can be synthesized by RAFT polymerization from PVDF macroCTAs and rationalizes this discovery using DFT calculations.

One-pot synthesis of poly(vinylidene fluoride) methacrylate macromonomers via thia-Michael addition

A comparison of two one-pot methods to prepare methacrylate PVDF-macromonomers and the synthesis of PVDF-containing block copolymers.

Kinetic and mechanistic aspects of the iodine transfer copolymerization of vinylidene fluoride with 2,3,3,3-tetrafluoro-1-propene and functionalization into ω-hydroxy fluorinated copolymers

ω-Hydroxy functionalized poly(vinylidene fluoride) prepared in a water-based non-fluorinated solvent by iodine transfer copolymerization VDF and 1234yf.