Highly Permeable Polymer Membranes Containing Directed Channels for Water Purification

Cellulose Membranes: Synthesis and Applications for Water and Gas Separation and Purification

Membranes are a selective barrier that allows certain species (molecules and ions) to pass through while blocking others. Some rely on size exclusion, where larger molecules get stuck while smaller ones permeate through. Others use differences in charge or polarity to attract and repel specific species. Membranes can purify air and water by allowing only air and water molecules to pass through, while preventing contaminants such as microorganisms and particles, or to separate a target gas or vapor, such as H2 and CO2, from other gases. The higher the flux and selectivity, the better a material is for membranes. The desirable performance can be tuned through material type (polymers, ceramics, and biobased materials), microstructure (porosity and tortuosity), and surface chemistry. Most membranes are made from plastic from petroleum-based resources, contributing to global climate change and plastic pollution. Cellulose can be an alternative sustainable resource for making renewable membranes. Cellulose exists in plant cell walls as natural fibers, which can be broken down into smaller components such as cellulose fibrils, nanofibrils, nanocrystals, and cellulose macromolecules through mechanical and chemical processing. Membranes made from reassembling these particles and molecules have variable pore architecture, porosity, and separation properties and, therefore, have a wide range of applications in nano-, micro-, and ultrafiltration and forward osmosis. Despite their advantages, cellulose membranes face some challenges. Improving the selectivity of membranes for specific molecules often comes at the expense of permeability. The stability of cellulose membranes in harsh environments or under continuous operation needs further improvement. Research is ongoing to address these challenges and develop advanced cellulose membranes with enhanced performance. This article reviews the microstructures, fabrication methods, and potential applications of cellulose membranes, providing some critical insights into processing-structure-property relationships for current state-of-the-art cellulosic membranes that could be used to improve their performance.

Nanocellulose-Bovine Serum Albumin Interactions in an Aqueous Medium: Investigations Using In Situ Nanocolloidal Probe Microscopy and Reactive Molecular Dynamics Simulations

As a versatile nanomaterial derived from renewable sources, nanocellulose has attracted considerable attention for its potential applications in various sectors, especially those focused on water treatment and remediation. Here, we have combined atomic force microscopy (AFM) and reactive molecular dynamics (RMD) simulations to characterize the interactions between cellulose nanofibers modified with carboxylate or phosphate groups and the protein foulant model bovine serum albumin (BSA) at pH 3.92, which is close to the isoelectric point of BSA. Colloidal probes were prepared by modification of the AFM probes with the nanofibers, and the nanofiber coating on the AFM tip was for the first time confirmed through fluorescence labeling and confocal optical sectioning. We have found that the wet-state normalized adhesion force is approximately 17.87 ± 8.58 pN/nm for the carboxylated cellulose nanofibers (TOCNF) and about 11.70 ± 2.97 pN/nm for the phosphorylated ones (PCNF) at the studied pH. Moreover, the adsorbed protein partially unfolded at the cellulose interface due to the secondary structure's loss of intramolecular hydrogen bonds. We demonstrate that nanocellulose colloidal probes can be used as a sensitive tool to reveal interactions with BSA at nano and molecular scales and under in situ conditions. RMD simulations helped to gain a molecular- and atomistic-level understanding of the differences between these findings. In the case of PCNF, partially solvated metal ions, preferentially bound to the phosphates, reduced the direct protein-cellulose connections. This understanding can lead to significant advancements in the development of cellulose-based antifouling surfaces and provide crucial insights for expanding the pH range of use and suggesting appropriate recalibrations.

Does pervasive interconnected network of cellulose nanocrystals in nanocomposite membranes address simultaneous mechanical strength/water permeability/salt rejection improvement?

In this research work, we investigated the effect of two cellulose nanocrystal (CNC)-related parameters, namely aspect ratio and loading content on the mechanical and desalination performance of a cellulose diacetate (CDA) model membrane system. Dispersion of high aspect ratio (HAR) CNCs in the CDA resulted in different types of nanoassembly, represented by evaluating the mechanical efficacy coefficient (CFE), viscoelastic responses and separation performance of the nanocomposite membranes. Accordingly, 0.15 and 0.25 wt% showed random isolated dispersion and tight polymer-nanorod network, while 0.50 and 0.75 wt% conformed to nanorods' pervasive interconnected network (PIN) through side-by-side aggregation and intensive bundle alignment, respectively. Specifically, the nanocomposite membrane containing 0.50 wt% HAR-CNCs simultaneously demonstrated improved mechanical strength along with mitigated water permeability/salt rejection tradeoff for brackish water desalination. This concurrent boosting was attributed to the effective mechanical reinforcement mechanism induced by the percolating network along with its partial aggregation-caused bi-continuous and electrostatically-controlled nano-pathways, orchestrating the separation tradeoff. It confirmed our hypothesis that a nanocomposite membrane with metamaterial characteristic could be obtained via manipulating the dispersion state of CNC rods in the CDA, triggering coincided optimization of mechanical strength and desalination performance.

Optimized Polymeric Membranes for Water Treatment: Fabrication, Morphology, and Performance

Conventional polymers, endowed with specific functionalities, are extensively utilized for filtering and extracting a diverse set of chemicals, notably metals, from solutions. The main structure of a polymer is an integral part for designing an efficient separating system. However, its chemical functionality further contributes to the selectivity, fabrication process, and resulting product morphology. One example would be a membrane that can be employed to selectively remove a targeted metal ion or chemical from a solution, leaving behind the useful components of the solution. Such membranes or products are highly sought after for purifying polluted water contaminated with toxic and heavy metals. An efficient water-purifying membrane must fulfill several requirements, including a specific morphology attained by the material with a specific chemical functionality and facile fabrication for integration into a purifying module Therefore, the selection of an appropriate polymer and its functionalization become crucial and determining steps. This review highlights the attempts made in functionalizing various polymers (including natural ones) or copolymers with chemical groups decisive for membranes to act as water purifiers. Among these recently developed membrane systems, some of the materials incorporating other macromolecules, e.g., MOFs, COFs, and graphene, have displayed their competence for water treatment. Furthermore, it also summarizes the self-assembly and resulting morphology of the membrane materials as critical for driving the purification mechanism. This comprehensive overview aims to provide readers with a concise and conclusive understanding of these materials for water purification, as well as elucidating further perspectives and challenges.

Nanocelluloses fine-tuned polyvinylidene fluoride (PVDF) membrane for enhanced separation and antifouling

To mitigate membrane fouling and address the trade-off between permeability and selectivity, we fabricated nanocellulose (NC) fine-tuned polyvinylidene fluoride (PVDF) porous membranes (NC-PVDFs) using phase inversion method through blending NCs with varied aspect ratios, surface charges and grafted functional groups. NC-PVDF presented rougher surface (increased by at least 18.3 %), higher porosity and crystallinity compared to PVDF membrane. Moreover, cellulose nanocrystals incorporated PVDF (CNC-PVDF) elevated membrane surface charge and hydrophilicity (from 74.3° to 71.7°), while 2,2,6,6-tetramethylpiperidine-1-oxyl-oxidized cellulose nanofibers modified PVDF (TCNF-PVDF) enhanced the porosity (from 25.0 % to 40.3 %) and tensile strength (63.6 % higher than PVDF). For separation performance, NC improved flux, rejection and fouling resistance due to facilitation of phase transition thermokinetics as pore-forming agent and increased hydrophilicity at both interface and pore wall. For water flux, NC-PVDFs (139-228 L·m-2·h-1) resulted in increased permeability compared to bare PVDF. CNC-PVDF membrane exhibited the highest water flux because of improved porosity, roughness and hydrophilicity. For bovine serum albumin (BSA) rejection, the removal rates of all NC-PVDFs were all above 90 %. Notably, TCNF-PVDF exhibited the most remarkable elevation of BSA rejection (95.1 %) owing to size exclusion and charge repulsion in comparison with PVDF.

Theoretical verification on adsorptive removal of caffeine by carbon and nitrogen-based surfaces: Role of charge transfer, π electron occupancy, and temperature

Eliminating an emerging water pollutant, caffeine molecules, from an aqueous solution using carbon and nitrogen-based adsorbents is of significant interest to public health. These adsorbents have been shown to have decent adsorption capacity toward caffeine due to their surface functionality. Therefore, screening various carbon and nitrogen-based surfaces can be a better option for high-performance adsorbents to remove caffeine efficiently from wastewater. Herein, we present combined first principles and molecular dynamics quantification of the adsorption enthalpies of caffeine molecules on the possible active sites of carbon and nitrogen-based adsorbents (graphene, phagraphene, graphdiyne, single-wall carbon nanotube, fullerene, and graphitic carbon nitride) with the incorporation of Van der Waals interactions. From the DFT calculations, N-doped carbon surfaces show the highest adsorption energies of single and dimer CAF compared to pristine carbon-based adsorbents. A charge density difference and Bader charge analysis display that high charge transfer occurs between the caffeine's oxygen and the surface's nitrogen atoms. An abundance of π-electrons from the nitrogen atoms, composed of large electron clouds of aromatic rings on the graphitic carbon surface, tends to favor extensive π-π interactions with the caffeine molecule. The high value of pz electron occupancy (1.445) of N in the hexagonal ring of the graphitic surface transfers additional charge transfer, which leads to strong adsorption energy of CAF than pristine surfaces. Also, the g-C3N4 surface adsorbs the CAF molecule with higher adsorption than other N-doped carbon surfaces due to the high pz_eo (1.5448) of N atoms on the surface. At 310 K, the water molecules' kinetics aids the single and dimer caffeine molecules to adsorb with the highest adsorption energies on the active sites of g-C3N4 surfaces than graphene adsorbent.

High-Flux Nanofibrous Composite Reverse Osmosis Membrane Containing Interfacial Water Channels for Desalination

A nanofibrous composite reverse osmosis (RO) membrane with a polyamide barrier layer containing interfacial water channels was fabricated on an electrospun nanofibrous substrate via an interfacial polymerization process. The RO membrane was employed for desalination of brackish water and exhibited enhanced permeation flux as well as rejection ratio. Nanocellulose was prepared by sequential oxidations of 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) and sodium periodate systems and surface grafting with different alkyl groups including octyl, decanyl, dodecanyl, tetradecanyl, cetyl, and octadecanyl groups. The chemical structure of the modified nanocellulose was verified subsequently by Fourier transform infrared (FTIR), thermal gravimetric analysis (TGA), and solid NMR measurements. Two monomers, trimesoyl chloride (TMC) and m-phenylenediamine (MPD), were employed to prepare a cross-linked polyamide matrix, i.e., the barrier layer of the RO membrane, which integrated with the alkyl groups-grafted nanocellulose to build up interfacial water channels via interfacial polymerization. The top and cross-sectional morphologies of the composite barrier layer were observed by means of scanning electron microscopy (SEM), atomic force microscopy (AFM), and transmission electron microscopy (TEM) to verify the integration structure of the nanofibrous composite containing water channels. The aggregation and distribution of water molecules in the nanofibrous composite RO membrane verified the existence of water channels, demonstrated by molecular dynamics (MD) simulations. The desalination performance of the nanofibrous composite RO membrane was conducted and compared with that of commercially available RO membranes in the processing of brackish water, where 3 times higher permeation flux and 99.1% rejection ratio against NaCl were accomplished. This indicated that the engineering of interfacial water channels in the barrier layer could substantially increase the permeation flux of the nanofibrous composite membrane while retaining the high rejection ratio as well, i.e., to break through the trade-off between permeation flux and rejection ratio. Antifouling properties, chlorine resistance, and long-term desalination performance were also demonstrated to evaluate the potential applications of the nanofibrous composite RO membrane; remarkable durability and robustness were achieved in addition to 3 times higher permeation flux and a higher rejection ratio against commercial RO membranes in brackish water desalination.

The recent advance of precisely designed membranes for sieving

Developing new membranes with both high selectivity and permeability is critical in membrane science since conventional membranes are often limited by the trade-off between selectivity and permeability. In recent years, the emergence of advanced materials with accurate structures at atomic or molecular scale, such as metal organic framework, covalent organic framework, graphene, has accelerated the development of membranes, which benefits the precision of membrane structures. In this review, current state-of-the-art membranes are first reviewed and classified into three different types according to the structures of their building blocks, including laminar structured membranes, framework structured membranes and channel structured membranes, followed by the performance and applications for representative separations (liquid separation and gas separation) of these precisely designed membranes. Last, the challenges and opportunities of these advanced membranes are also discussed.

High-Performance Polyamide Reverse Osmosis Membrane Containing Flexible Aliphatic Ring for Water Purification

A reverse osmosis (RO) membrane with a high water permeance and salt rejection is needed to reduce the energy requirement for desalination and water treatment. However, improving water permeance while maintaining a high rejection of the polyamide RO membrane remains a great challenge. Herein, we report a rigid-flexible coupling strategy to prepare a high-performance RO membrane through introducing monoamine with a flexible aliphatic ring (i.e., piperidine (PPR)) into the interfacial polymerization (IP) system of trimesoyl chloride (TMC) and m-phenylenediamine (MPD). The resulted polyamide film consists of a robust aromatic skeleton and soft aliphatic-ring side chain, where the aliphatic ring optimizes the microstructure of polyamide network at a molecular level. The obtained membranes thereby showed an enhanced water permeance of up to 2.96 L·m^-2 h^-1 bar^-1, nearly a 3-fold enhancement compared to the control group, meanwhile exhibiting an ultrahigh rejection toward NaCl (99.4%), thus successfully overcoming the permeability-selectivity trade-off limit. Furthermore, the mechanism of the enhanced performance was investigated by molecular simulation. Our work provides a simple way to fabricate advanced RO membranes with outstanding performance.

Nanocellulose for Sustainable Water Purification

Nanocelluloses (NC) are nature-based sustainable biomaterials, which not only possess cellulosic properties but also have the important hallmarks of nanomaterials, such as large surface area, versatile reactive sites or functionalities, and scaffolding stability to host inorganic nanoparticles. This class of nanomaterials offers new opportunities for a broad spectrum of applications for clean water production that were once thought impractical. This Review covers substantial discussions based on evaluative judgments of the recent literature and technical advancements in the fields of coagulation/flocculation, adsorption, photocatalysis, and membrane filtration for water decontamination through proper understanding of fundamental knowledge of NC, such as purity, crystallinity, surface chemistry and charge, suspension rheology, morphology, mechanical properties, and film stability. To supplement these, discussions on low-cost and scalable NC extraction, new characterizations including solution small-angle X-ray scattering evaluation, and structure-property relationships of NC are also reviewed. Identifying knowledge gaps and drawing perspectives could generate guidance to overcome uncertainties associated with the adaptation of NC-enabled water purification technologies. Furthermore, the topics of simultaneous removal of multipollutants disposal and proper handling of post/spent NC are discussed. We believe NC-enabled remediation nanomaterials can be integrated into a broad range of water treatments, greatly improving the cost-effectiveness and sustainability of water purification.

Recent developments in polymeric nano-based separation membranes

Polymeric nanomaterials, which have tuneable chemical structures, versatile functionalities, and good compatibility with polymeric matrices, have attracted increasing interest from researchers for the construction of polymeric nano-based separation membranes. With their distinctive nanofeatures, polymeric nano-based membranes show great promise in overcoming bottlenecks in polymer membranes, namely, the trade-off between permeability and selectivity, low stability, and fouling issues. Accordingly, recent studies have focused on tuning the structures and tailoring the surface properties of polymeric nano-based membranes via exploitation of membrane fabrication techniques and surface modification strategies, with the objective of pushing the performance of polymeric nano-based membranes to a new level. In this review, first, the approaches for fabricating polymeric nano-based mixed matrix membranes and homogeneous membranes are summarized, such as surface coating, phase inversion, interfacial polymerization, and self-assembly methods. Next, the manipulation strategies of membrane surface properties, namely, the hydrophilicity/hydrophobicity, charge characteristics, and surface roughness, and interior microstructural properties, namely, the pore size and content, channel construction and regulation, are comprehensively discussed. Subsequently, the separation performances of liquid ions/molecules and gas molecules through polymeric nano-based membranes are systematically reported. Finally, we conclude this review with an overview of various unsolved scientific and technical challenges that are associated with new opportunities in the development of advanced polymeric nano-based membranes.

Nanocellulose-Based Materials for Water Treatment: Adsorption, Photocatalytic Degradation, Disinfection, Antifouling, and Nanofiltration

Nanocelluloses are promising bio-nano-materials for use as water treatment materials in environmental protection and remediation. Over the past decades, they have been integrated via novel nanoengineering approaches for water treatment processes. This review aims at giving an overview of nanocellulose requirements concerning emerging nanotechnologies of waster treatments and purification, i.e., adsorption, absorption, flocculation, photocatalytic degradation, disinfection, antifouling, ultrafiltration, nanofiltration, and reverse osmosis. Firstly, the nanocellulose synthesis methods (mechanical, physical, chemical, and biological), unique properties (sizes, geometries, and surface chemistry) were presented and their use for capturing and removal of wastewater pollutants was explained. Secondly, different chemical modification approaches surface functionalization (with functional groups, polymers, and nanoparticles) for enhancing the surface chemistry of the nanocellulose for enabling the effective removal of specific pollutants (suspended particles, microorganisms, hazardous metals ions, organic dyes, drugs, pesticides fertilizers, and oils) were highlighted. Thirdly, new fabrication approaches (solution casting, thermal treatment, electrospinning, 3D printing) that integrated nanocelluloses (spherical nanoparticles, nanowhiskers, nanofibers) to produce water treatment materials (individual composite nanoparticles, hydrogels, aerogels, sponges, membranes, and nanopapers) were covered. Finally, the major challenges and future perspectives concerning the applications of nanocellulose based materials in water treatment and purification were highlighted.

Fabrication of a hybrid ultrafiltration membrane based on MoS2 modified with dopamine and polyethyleneimine

The hydrophobicity of ultrafiltration membranes is the main cause of membrane fouling and reduced permeability, so it is necessary to improve the hydrophilicity and anti-fouling performance of ultrafiltration membrane materials. MoS₂ nanoparticles that were modified with polydopamine (PDA) and polyethyleneimine (PEI), named MoS₂-PDA-PEI, were added to fabricate a polyethersulfone ultrafiltration membrane (PES/MoS₂-PDA-PEI) for the first time. The effects of modified MoS₂ nanoparticles on membrane performance were clarified. The results indicated that the permeability, rejection, and anti-fouling capability of the hybrid PES/MoS₂-PDA-PEI membrane have been improved compared with the pristine PES membrane. When the content of MoS₂-PDA-PEI nanoparticles in the membrane is 0.5%, the pure water flux of the hybrid membrane reaches 364.03 L m⁻² h⁻¹, and the rejection rate of bovine serum albumin (BSA) and humic acid (HA) is 96.5% and 93.2% respectively. The flux recovery rate of HA reached 97.06%. As expected, the addition of MoS₂-PDA-PEI nanoparticles promotes the formation of the porous structure and improves the hydrophilicity of the membrane, thereby improving its antifouling performance.

The hydrophobicity of ultrafiltration membranes is the main cause of membrane fouling and reduced permeability, so it is necessary to improve the hydrophilicity and anti-fouling performance of ultrafiltration membrane materials.

Substitution of petroleum-based polymeric materials used in the electrospinning process with nanocellulose: A review and future outlook

The most fibrous reinforcing materials for engineered composites (e.g. carbon fiber, glass fiber) are solid fibers or loops, garments, and their preforms. In design and fabrication methods, the fiber orientation and design can therefore be regulated broadly. The continuous fibers from biobased materials such as plants are nevertheless growing interest. Nanocelluloses, which are projected to be cheaper than many other nanomaterials and potentially produce in great quantities, are of particular interest recently. They have an impressive strength to weight ratio and have so far demonstrated no care in their unmodified condition with respect to the climate, health and safety. The efficient and effective use of nanocellulose in continuous fibers is, however, difficult and a range of approaches have been studied where either directly or in combination with the polymers spin nanocellulose dispersions. In this study, a variety of approaches are reviewed and a perspective is provided to better understand the body of knowledge in this new and increasing area.

Charged ultrafiltration membranes based on TEMPO-oxidized cellulose nanofibrils/poly(vinyl alcohol) antifouling coating

This study reports the potential of TEMPO-oxidized cellulose nanofibrils (T-CNF)/poly(vinyl alcohol) (PVA) coatings to develop functionalized membranes in the ultrafiltration regime with outstanding antifouling performance and dimensional/pH stability. PVA acts as an anchoring phase interacting with the polyethersulfone (PES) substrate and stabilizing for the hygroscopic T-CNF via crosslinking. The T-CNF/PVA coated PES membranes showed a nano-textured surface, a change in the surface charge, and improved mechanical properties compared to the original PES substrate. A low reduction (4%) in permeance was observed for the coated membranes, attributable to the nanometric coating thickness, surface charge, and hydrophilic nature of the coated layer. The coated membranes exhibited charge specific adsorption driven by electrostatic interaction combined with rejection due to size exclusion (MWCO 530 kDa that correspond to a size of ∼35-40 nm). Furthermore, a significant reduction in organic fouling and biofouling was found for T-CNF/PVA coated membranes when exposed to BSA and E. coli. The results demonstrate the potential of simple modifications using nanocellulose to manipulate the pore structure and surface chemistry of commercially available membranes without compromising on permeability and mechanical stability.

Selective Vapor Permeation Behavior of Crosslinked PAMPS Membranes

The effect of crosslinking on vapor permeation behavior of polyelectrolyte membranes was studied. Poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPS) membranes were crosslinked by using crosslinkers with different lengths between the reactive ends. Crosslinked membranes with a longer crosslinking length showed lower water vapor permeability due to the lower sorption coefficient. It was also shown that the permeation behavior of PAMPS membranes was more affected by sorption than diffusion. For chemical protection applications, the ratio of water over chemical warfare agent permeability (i.e., selectivity) was measured. Due to the high water solubility of polyelectrolytes, crosslinked PAMPS allowed for the selective permeation of water over harmful chemical vapor, showing a selectivity of 20. The addition of electrospun nylon nanofibers in the membranes significantly improved the selectivity to 80, since the embedded nanofibers effectively reduced both diffusion and sorption coefficients of chemical warfare agents.

High-Flux, Antifouling Hydrophilized Ultrafiltration Membranes with Tunable Charge Density Combining Sulfonated Poly(ether sulfone) and Aminated Graphene Oxide Nanohybrid

In this work, a new protocol was developed for creating charge-tuned, hydrophilic hybrid ultrafiltration (UF) membranes with high flux, rejection rate, and fouling resistance. The membranes were fabricated using a combination of sulfonated poly(ether sulfone) (SPES) and aminated graphene (GO-SiO₂-NH₂) nanohybrid via the non-solvent-induced phase separation (NIPS) method. The GO-SiO₂-NH₂ nanohybrid was first synthesized using GO nanosheets and 3-aminopropyl triethoxysilane (APTES) through the covalent condensation reaction at 80 °C and was thoroughly characterized. Then, 2-8 wt% of the nanohybrid was incorporated into the matrix of SPES for the fabrication of the hybrid membranes. The resulting membranes were characterized using an electrokinetic analyzer, a contact angle goniometer, and Raman, field emission scanning electron microscopy-energy-dispersive X-ray spectrometry (FESEM-EDX), and atomic force microscopy experiments. The porosity, charge density, and surface morphology were altered, and the hybrid membranes became more hydrophilic after the incorporation of the nanohybrid. The pure water flux of the hybrid membranes systematically increased with the loading amount of the nanohybrid. The pure water flux of the hybrid membrane containing 6 wt% GO-SiO₂-NH₂ nanohybrid at a 2 bar feed pressure was 537 L m^-2 h^-1, about 3-fold that of pristine membrane (186 L m^-2 h^-1). The fouling resistance of the hybrid membranes was evaluated and confirmed using several representative foulants, including bovine serum albumin, humic acid, sodium alginate, and a synthetic solution of natural organic matter (NOM). The fabricated membranes were capable of removing more than 97% of NOM, without a compromise of their rejection rate.

An insight into nanocellulose as soft condensed matter: Challenge and future prospective toward environmental sustainability

Nanocellulose, a structural polysaccharide that has caught tremendous interests nowadays due to its renewability, inherent biocompatibility and biodegradability, abundance in resource, and environmental friendly nature. They are promising green nanomaterials derived from cellulosic biomass that can be disintegrated into cellulose nanofibrils (CNF) or cellulose nanocrystals (CNC), relying on their sensitivity to hydrolysis at the axial spacing of disordered domains. Owing to their unique mesoscopic characteristics at nanoscale, nanocellulose has been widely researched and incorporated as a reinforcement material in composite materials. The world has been consuming the natural resources at a much higher speed than the environment could regenerate. Today, as an uprising candidate in soft condensed matter physics, a growing interest was received owing to its unique self-assembly behaviour and quantum size effect in the formation of three-dimensional nanostructured material, could be utilised to address an increasing concern over global warming and environmental conservation. In spite of an emerging pool of knowledge on the nanocellulose downstream application, that was lacking of cross-disciplinary study of its role as a soft condensed matter for food, water and energy applications toward environmental sustainability. Here we aim to provide an insight for the latest development of cellulose nanotechnology arises from its fascinating physical and chemical characteristic for the interest of different technology holders.

Design of ultrathin hybrid membranes with improved retention efficiency of molecular dyes

Nanocellulose–graphene oxide ultrathin coatings for water purification membranes with excellent swelling resistance, permeability and dyes retention are presented.

Polyelectrolyte Composite Membranes Containing Electrospun Ion-Exchange Nanofibers: Effect of Nanofiber Surface Charges on Ionic Transport

Poly(vinyl alcohol) (PVA)-based ion-exchange nanofibers (IEX-NFs) and their composite polyelectrolyte membranes were prepared and characterized. The PVA-based NFs are well dispersed and form a three-dimensional network structure in the polymer matrix, Nafion. All of the prepared membranes show a similar ion-exchange capacity of ∼1.0 mmol g^-1. The ionic conductivities through the PVA- b-PSS-NF/Nafion composite membranes are superior to that of the Nafion membranes, but the conductivity through the PVA-NF/Nafion composite membrane is half that of the Nafion membrane. Our electrokinetic measurements clearly indicate that a high density of ion-exchange groups on the NF surface results in a continuous ionic transport path in the polymer matrix. In addition, the mechanical strength of all of the NF-composite membranes is improved compared with that of the membranes without NF.

Poly(butylene terephthalate) Fiber Assembly with Controllable Pore Size and Gradient Wettability: Potential in Simplifying Cell Culture Procedure

This study reports the scalable fabrication of a poly(butylene terephthalate) fiber assembly featured with controllable pore size and gradient wettability. Pore size is controlled via adjusting the throughput of melt blown process, while gradient wettability is achieved through single-sided plasma exposure and subsequent chitosan coating. When used in cell culture, the fiber assembly takes much less time in reaching a high cell collecting/releasing rate up to ≥99.5%, which is similar to that of the conventional centrifugal method. Other advantages of the fiber assembly, such as improved cell viability, reduced risk of contamination, and excellent reusability are also proved, leading us to believe its great potential in making the current cell culture procedure simpler and faster.

Nanoparticle-templated nanofiltration membranes for ultrahigh performance desalination

Nanofiltration (NF) membranes with ultrahigh permeance and high rejection are highly beneficial for efficient desalination and wastewater treatment. Improving water permeance while maintaining the high rejection of state-of-the-art thin film composite (TFC) NF membranes remains a great challenge. Herein, we report the fabrication of a TFC NF membrane with a crumpled polyamide (PA) layer via interfacial polymerization on a single-walled carbon nanotubes/polyether sulfone composite support loaded with nanoparticles as a sacrificial templating material, using metal-organic framework nanoparticles (ZIF-8) as an example. The nanoparticles, which can be removed by water dissolution after interfacial polymerization, facilitate the formation of a rough PA active layer with crumpled nanostructure. The NF membrane obtained thereby exhibits high permeance up to 53.5 l m^-2h^-1 bar^-1 with a rejection above 95% for Na₂SO₄, yielding an overall desalination performance superior to state-of-the-art NF membranes reported so far. Our work provides a simple avenue to fabricate advanced PA NF membranes with outstanding performance.

Facilitated Water Transport through Graphene Oxide Membranes Functionalized with Aquaporin-Mimicking Peptides

Water purification by membranes is widely investigated to address concerns related to the scarcity of clean water. Achieving high flux and rejection simultaneously is a difficult challenge using such membranes because these properties are mutually exclusive in common artificial membranes. Nature has developed a method for this task involving water-channel membrane proteins known as aquaporins. Here, the design and fabrication of graphene oxide (GO)-based membranes with a surface-tethered peptide motif designed to mimic the water-selective filter of natural aquaporins is reported. The short RF8 (RFRFRFRF, where R and F represent arginine and phenylalanine, respectively) octapeptide is a concentrated form of the core component of the Ar/R (aromatic/arginine) water-selective filter in aquaporin. The resulting GO-RF8 shows superior flux and high rejection similar to natural aquaporins. Molecular dynamics simulation reveal the unique configuration of RF8 peptides and the transport of water in GO-RF8 membranes, supporting that RF8 effectively emulates the core function of aquaporins.

Preparation and characterization of novel forward osmosis membrane incorporated with sulfonated carbon nanotubes

In this study, carbon nanotubes (CNTs) were modified with sulfonated groups and incorporated into the active layer of a forward osmosis (FO) membrane to achieve a desirable thin-film nanocomposite (TFN) FO membrane. Different concentrations of sulfonated carbon nanotubes (SCNTs) were added, and their impact on the FO membrane was also investigated, including the hydrophilicity, roughness, membrane morphology and FO performance. With the addition of SCNTs, the membrane surface got smoother and denser, and the hydrophilicity also improved significantly. Regarding FO performance, SCNTs-functionalized FO membranes exhibited higher water flux (J_w) and lower reverse salt flux (J_s). The optimal J_w of 29.9 ± 1.6 LMH was achieved by using 1 M NaCl solution as the draw solution (DS) and deionized (DI) water as the feed solution (FS), almost 140% higher than the control (21.3 ± 2.1 LMH) and J_s decreased to about 12%.

In this study, carbon nanotubes (CNTs) were modified with sulfonated groups and incorporated into the active layer of a forward osmosis (FO) membrane to achieve a desirable thin-film nanocomposite (TFN) FO membrane.

A review on organic–inorganic hybrid nanocomposite membranes: a versatile tool to overcome the barriers of forward osmosis

Forward osmosis (FO) processes have recently attracted increasing attention and show great potential as a low-energy separation technology for water regeneration and seawater desalination. However, a number of challenges, such as internal concentration polarization, membrane fouling, and the trade-off effect, limit the scaleup and industrial practicality of FO. Hence, a versatile method is needed to address these problems and fabricate ideal FO membranes. Among the many methods, incorporating polymeric FO membranes with inorganic nanomaterials is widely used and effective and is reviewed in this paper. The properties of FO membranes can be improved and meet the demands of various applications with the incorporation of nanomaterials. This review presents the actualities and advantages of organic–inorganic hybrid nanocomposite FO membranes. Nanomaterials applied in the FO field, such as carbon nanotubes, graphene oxide, halloysite nanotubes, silica and Ag nanoparticles, are classified and compared in this review. The effects of modification methods on the performance of nanocomposite FO membranes, including blending, in situ interfacial polymerization, surface grafting and layer-by-layer assembly, are also reviewed. The outlook section discusses the prospects of organic–inorganic hybrid nanocomposite FO membranes and advanced nanotechnologies available for FO processes. This discussion may provide new opportunities for developing novel FO membranes with high performance.

Nanocomposite forward osmosis (FO) membranes have attracted increasing attentions recently and showed great comprehensive performance. Various modification methods have been employed to incorporate inorganic nanomaterials to FO membranes.