Effect of Long Range Interactions on the Glass Transition Temperature of Thin Polystyrene Films

Interfacial Selective Study on the Gelation Behavior of Aqueous Methylcellulose Solution via a Quartz Crystal Microbalance

It is important to understand the interfacial structure and physical properties of a polymer material to improve its function. In this study, we used a quartz crystal microbalance (QCM) and neutron reflectivity (NR) measurements to evaluate the viscoelasticity and structure of an aqueous methylcellulose solution near the gold interface. The apparent shear modulus, which was calculated from the complex frequency, was used to assess gelation behavior. The apparent shear modulus determined via the QCM suggested high-frequency rheological properties that reflected the relaxation of skeletal stretching and rotational motion of polymer segments, as well as cooperative motion of the various functional groups. The gelation temperature was found to be lowered at the interface in comparison with that of the bulk. It is suggested that the QCM can evaluate the shear modulus accompanying the gelation near the interface. The interfacial segregation on the gold substrate caused by the surface free energy and long-range van der Waals interaction was observed from NR measurements.

Interphase in Polymer Nanocomposites

The lightweight and high-strength functional nanocomposites are important in many practical applications. Natural biomaterials with excellent mechanical properties provide inspiration for improving the performance of composite materials. Previous studies have usually focused on the bionic design of the material's microstructure, sometimes overlooking the importance of the interphase in the nanocomposite system. In this Perspective, we will focus on the construction and control of the interphase in confined space and the connection between the interphase and the macroscopic properties of the materials. We shall survey the current understanding of the critical size of the interphase and discuss the general rules of interphase formation. We hope to raise awareness of the interphase concept and encourage more experimental and simulation studies on this subject, with the aim of an optimal design and controllable preparation of polymer nanocomposite materials.

Precise Thermoplastic Processing of Graphene Oxide Layered Solid by Polymer Intercalation

The processing capability is vital for the wide applications of materials to forge structures as-demand. Graphene-based macroscopic materials have shown excellent mechanical and functional properties. However, different from usual polymers and metals, graphene solids exhibit limited deformability and processibility for precise forming. Here, we present a precise thermoplastic forming of graphene materials by polymer intercalation from graphene oxide (GO) precursor. The intercalated polymer enables the thermoplasticity of GO solids by thermally activated motion of polymer chains. We detect a critical minimum containing of intercalated polymer that can expand the interlayer spacing exceeding 1.4 nm to activate thermoplasticity, which becomes the criteria for thermal plastic forming of GO solids. By thermoplastic forming, the flat GO-composite films are forged to Gaussian curved shapes and imprinted to have surface relief patterns with size precision down to 360 nm. The plastic-formed structures maintain the structural integration with outstanding electrical (3.07 × 10⁵ S m^-1) and thermal conductivity (745.65 W m^-1 K^-1) after removal of polymers. The thermoplastic strategy greatly extends the forming capability of GO materials and other layered materials and promises versatile structural designs for more broad applications.

Hydroplastic Micromolding of 2D Sheets

Processing 2D sheets into desired structures with high precision is of great importance for fabrication and application of their assemblies. Solution processing of 2D sheets from dilute dispersions is a commonly used method but offers limited control over feature size precision owing to the extreme volume shrinkage. Plastic processing from the solid state is therefore a preferable approach to achieve high precision. However, plastic processing is intrinsically hampered by strong interlayer interactions of the 2D sheet solids. Here, a hydroplastic molding method to shape layered solids of 2D sheets with micrometer-scale precision under ambient conditions is reported. The dried 2D layered solids are plasticized by intercalated solvents, affording plastic near-solid compounds that enable local plastic deformation. Such an intercalated solvent-induced hydroplasticity is found in a broad family of 2D materials, for example graphene, MoS₂ , and MXene. The hydroplastic molding enables fabrication of complex spatial structures (knurling, origami) and microimprinted tubular structures down to diameters of 390 nm with good fidelity. The method enhances the structural accuracy and enriches the structural diversity of 2D macroassemblies, thus providing a feasible strategy to tune their electrical, optical, and other functional properties.

Entropy-driven segregation in epoxy-amine systems at a copper interface

The composition of an epoxy resin at the interface with the adherend is usually different from that in the bulk due to the enrichment of a specific constituent, a characteristic called interfacial segregation. For better adhesion, it should be precisely understood how epoxy and amine molecules exist on the adherend surface and react with each other to form a three-dimensional network. In this study, the entropic factor of the segregation in a mixture of epoxy and amine at the copper interface before and after the curing reaction is discussed on the basis of a full-atomistic molecular dynamics (MD) simulation. Smaller molecules were preferentially segregated at the interface regardless of the epoxy and amine, and this segregation remained after the curing process. No segregation occurred at the interface for a combination composed of epoxy and amine molecules with a similar size. These findings make it clear that the size disparity between constituents affects the interfacial segregation via the packing and/or translational entropy. The curing reaction was slower near the interface than in the bulk, and a large amount of unreacted molecules remained there. Finally, the effect of molecular shape was also examined. Linear molecules were more likely to segregate than round-shaped ones even though they were similar in volume. We believe that these findings, which are difficult to obtain experimentally, contribute to the understanding of the interfacial adhesion phenomena on a molecular scale.

Effect of Molecular Architecture on Conformational Relaxation of Polymer Chains at Interfaces

Dynamics of polymer chains near an interface with an inorganic material are believed to strongly affect the physical properties of polymers in nanocomposites and thin films. An effect of molecular architecture on the conformational relaxation behavior of polystyrene (PS) chains at the quartz interface using sum-frequency generation spectroscopy is reported here. The relaxation dynamics of chains in direct contact with the quartz interface is slower with a star-shaped architecture than that with its linear counterpart. The extent of the delay becomes more pronounced with increasing number of arms. This can be explained in terms of the superior interfacial activity to the quartz surface for the star-shaped PS.

Continuous crystalline graphene papers with gigapascal strength by intercalation modulated plasticization

Graphene has an extremely high in-plane strength yet considerable out-of-plane softness. High crystalline order of graphene assemblies is desired to utilize their in-plane properties, however, challenged by the easy formation of chaotic wrinkles for the intrinsic softness. Here, we find an intercalation modulated plasticization phenomenon, present a continuous plasticization stretching method to regulate spontaneous wrinkles of graphene sheets into crystalline orders, and fabricate continuous graphene papers with a high Hermans' order of 0.93. The crystalline graphene paper exhibits superior mechanical (tensile strength of 1.1 GPa, stiffness of 62.8 GPa) and conductive properties (electrical conductivity of 1.1 × 105 S m-1, thermal conductivity of 109.11 W m-1 K-1). We extend the ultrastrong graphene papers to the realistic laminated composites and achieve high strength combining with attractive conductive and electromagnetic shielding performance. The intercalation modulated plasticity is revealed as a vital state of graphene assemblies, contributing to their industrial processing as metals and plastics.

Reorientation Kinetics of Local Conformation of Polyisoprene at Substrate Interface

The performance of a polymer composite material, in which inorganic fillers are dispersed, is closely related to the aggregation states and dynamics of polymer chains at the interface with the filler. In this study, the local conformation of polyisoprene (PI) at a quartz substrate interface was studied as a model system for the rubber/filler composite material. PI films were prepared from a toluene solution onto quartz substrates by a spin-coating method. Sum-frequency generation spectroscopy revealed that the local conformation of PI chains at the quartz interface depended on the spinning rate. The tilt angle of methyl groups increased with the rotational speed, probably due to the centrifugal force applied to chains and probably also the evaporation rate of the solvent during the solidification process. This result indicates that the interfacial orientation of PI chains can remain even at room temperature, which is 87 K higher than the bulk glass transition temperature (T_g^b). The interfacial orientation disappeared at a temperature approximately 120 K higher than T_g^b.

The architecture of the adsorbed layer at the substrate interface determines the glass transition of supported ultrathin polystyrene films

To elucidate the mechanism underlying the effect of polymer/solid interfacial interactions on the dynamics of thin polymer films, the glass transition of thin end-functionalized polystyrene films supported on SiO₂-Si, such as proton-terminated PS (PS-H), α,ω-dicarboxy-terminated PS (PS-COOH), and α,ω-dihydroxyl-terminated PS (PS-OH), was investigated. All the PS films exhibited a substantial depression in T_g with decreasing film thickness, while the extent of such depression was strongly dependent on the chemical structure of the end groups and molecular weights. It was found that T - T of the various PS films increased linearly with increasing h_ads/R_g, in which h_ads is the thickness of the interfacial adsorbed layer and R_g is the radius of gyration of PS. The h_ads/R_g is a direct reflection of the macromolecular chain conformation within the adsorbed layer which was affected by its end groups and molecular weights. These findings are in line with the work of Napolitano, and present direct experimental evidence.

Probing the rheological properties of supported thin polystyrene films by investigating the growth dynamics of wetting ridges

Despite its importance in the processing of nanomaterials, the rheological behavior of thin polymer films is poorly understood, partly due to the inherent measurement challenges. Herein, we have developed a facile method for investigating the rheological behavior of supported thin polymeric films by monitoring the growth of the "wetting ridge"-a microscopic protrusion on the film surface due to the capillary forces exerted by a drop of ionic liquid placed on the film surface. It was found that the growth dynamics of the wetting ridge and the behavior of polystyrene rheology are directly linked. Important rheological properties, such as the flow temperature (Tf), viscosity (η), and terminal relaxation time (τ0) of thin polystyrene films, can be derived by studying the development of the height of the wetting ridge with time and the sample temperature. Rheological studies using the proposed approach for supported thin polystyrene (PS) films with thickness down to 20 nm demonstrate that the PS thin film exhibits facilitated flow, with reduced viscosity and lowered viscous temperature and a shortened rubbery plateau, when SiOx-Si was used as the substrate. However, sluggish flow was observed for the PS film supported by hydrogen-passivated silicon substrates (H-Si). The differences in enthalpic interactions between PS and the substrates are the reason for this divergence in the whole-chain mobility and flow ability of thin PS films deposited on SiOx-Si and H-Si surfaces. These results indicate that this approach could be a reliable rheological probe for supported thin polymeric films with different thicknesses and various substrates.

Manipulating the glass transition behavior of sulfonated polystyrene by functionalized nanoparticle inclusion

Nanoscale interfaces can modify the phase transition behaviors of polymeric materials. Here, we report the double glass transition temperature (Tg) behavior of sulfonated polystyrene (sPS) by the inclusion of 14 nm amine-functionalized silica (NH2-SiO2) nanoparticles, which is different from the single Tg behaviors of neat sPS and silica (SiO2)-filled sPS. The inclusion of 20 wt% NH2-SiO2 nanoparticles results in an increase of Tg by 9.3 °C as well as revealing a second Tg reduced by 44.7 °C compared to the Tg of neat sPS. By contrast, when SiO2 nanoparticles with an identical concentration and size to NH2-SiO2 are dispersed, sPS composites possess a single Tg of 7.3 °C higher than that of the neat sPS. While a nanoscale dispersion is observed for SiO2 nanoparticles, as confirmed by microscopic and X-ray scattering analyses, NH2-SiO2 nanoparticles show the coexistence of micron-scale clustering along with a nanoscale dispersion of the individual nanoparticles. The micro-phase separation contributes to the free volume induced Tg reduction by the plasticization effect, whereas the Tg increase originates from the polymer segment mobility constrained by nanoconfinement and the rigid amorphous fractions deriving from strong polymer-particle interactions.

Glassy dynamics of poly(2-vinyl-pyridine) brushes with varying grafting density

The molecular dynamics of poly(2-vinyl-pyridine) (P2VP) brushes is measured by Broadband Dielectric Spectroscopy (BDS) in a wide temperature (250 K to 440 K) and broad spectral (0.1 Hz to 1 MHz) range. This is realized using nanostructured, highly conductive silicon electrodes being separated by silica spacers as small as 35 nm. A "grafting-to"-method is applied to prepare the P2VP-brushes with five different grafting densities (0.030 nm(-2) to 0.117 nm(-2)), covering the "true-brush" regime with highly stretched coils and the "mushroom-to-brush" transition regime. The film thickness ranges between 1.8 to 7.1 (±0.2) nm. Two relaxations are observed, an Arrhenius-like process being attributed to fluctuations in the poly(glycidyl-methacrylate) (PGMA) linker used for the grafting reaction and the segmental dynamics (dynamic glass transition) of the P2VP brushes. The latter is characterized by a Vogel-Fulcher-Tammann dependence similar to bulk P2VP. The results can be comprehended considering the length scale on which the dynamic glass transition (≤1 nm) takes place.

Sensitive and reliable detection of glass transition of polymers by fluorescent probes based on AIE luminogens

A sensitive and reliable approach for the detection of the glass transition of polymers using AIE luminogens as fluorescent probes was reported.

Effect of side-chain carbonyl groups on the interface of vinyl polymers with water

The nature of the polymer-water interface in the poly(methyl 2-propenyl ether) (PMPE)-water model system is investigated by sum-frequency generation spectroscopy, which at the moment gives the best depth resolution among available techniques. PMPE, synthesized via living cationic polymerization, is structurally similar to poly(methyl methacrylate) (PMMA) except for lacking a carbonyl group. We here probe the polymer local conformation as well as the aggregation states of water at the interface. Comparing the results of our measurements to the PMMA-water system, the effect of a carbonyl group on the water structure at the interface is discussed. This knowledge should be crucial to the design and construction of highly functionalized polymer interfaces for bioapplications.

Multistep Thickening of Nafion Thin Films in Water

Water sorption kinetics in thin Nafion films prepared on silver and silicon oxide substrates was examined by surface plasmon resonance and neutron reflectivity measurements. It was found that the films thickened in three regimes. The asymptotic swelling ratios in regimes I, II, and III were 1.05, 1.26, and 1.41, respectively. These values were independent of the substrate species and were coincident with the transition points of different hydration states in the bulk Nafion; water binding to sulfonic acid groups, the formation of sphere-like ionic clusters, and bridge formation between clusters. The swelling was much slower in thin films than in the bulk due to the mobility restriction of Nafion near the substrate.