Cationic Poly(ionic liquid) with Tunable Lower Critical Solution Temperature-Type Phase Transition

Coacervation between two positively charged poly(ionic liquid)s

Complex coacervates are usually formed through electrostatic attraction between oppositely charged polyelectrolytes, with a few of exceptions such as coacervates of like-charge proteins and polyelectrolytes, both in vivo and in vitro. Understanding of the preparation and mechanism of these coacervates is limited. Here we design a positively charged poly(ionic liquid) poly(1-vinyl-3-benzylimidazolium chloride) (PILben) that bears benzene rings in repeating units. Fluidic coacervates were prepared by mixing the PILben aqueous solution with a like-charge poly(ionic liquid) named poly(dimethyl diallyl ammonium chloride) (PDDA). The effects of polymer concentration, temperature and ionic strength in the PILben-PDDA coacervate were studied. Raman spectroscopy and two-dimensional ¹ H-¹³ C heteronuclear single quantum coherence (¹ H-¹³ C HSQC) characterizations verify that the coacervate formation benefits from the cation-π interaction between PILben and PDDA. This work provides principles and understandings of designing coacervates derived from like-charge poly(ionic liquids) with high charge density. This article is protected by copyright. All rights reserved.

Recent advances in poly(ionic liquid)s for biomedical application

Poly(ionic liquid)s (PILs) are polymers containing ions in their side-chain or backbone, and the designability and outstanding physicochemical properties of PILs have attracted widespread attention from researchers. PILs have specific characteristics, including negligible vapor pressure, high thermal and chemical stability, non-flammability, and self-assembly capabilities. PILs can be well combined with advanced analytical instruments and technology and have made outstanding contributions to the development of biomedicine aiding in the continuous advancement of science and technology. Here we reviewed the advances of PILs in the biomedical field in the past five years with a focus on applications in proteomics, drug delivery, and development. This paper aims to engage pharmaceutical and biomedical scientists to full understand PILs and accelerate the progress from laboratory research to industrialization.

Morphological transitions of cationic PISA particles by salt, triflate ions and temperature; comparison of three polycations

Three strong polycation stabilizers, poly((vinylbenzyl) trimethylammonium chloride), PVBTMAC, poly((2-(methacryloyloxy)ethyl)trimethylammonium chloride), PMOTAC, and poly((3-acrylamidopropyl) trimethylammonium chloride), PAMPTMAC have been synthesized with reversible addition-fragmentation chain transfer, RAFT, reactions. Solubilities of the polycations...

Influence of Salt on the Self-Organization in Solutions of Star-Shaped Poly-2-alkyl-2-oxazoline and Poly-2-alkyl-2-oxazine on Heating

The water-salt solutions of star-shaped six-arm poly-2-alkyl-2-oxazines and poly-2-alkyl-2-oxazolines were studied by light scattering and turbidimetry. The core was hexaaza[26]orthoparacyclophane and the arms were poly-2-ethyl-2-oxazine, poly-2-isopropyl-2-oxazine, poly-2-ethyl-2-oxazoline, and poly-2-isopropyl-2-oxazoline. NaCl and N-methylpyridinium p-toluenesulfonate were used as salts. Their concentration varied from 0-0.154 M. On heating, a phase transition was observed in all studied solutions. It was found that the effect of salt on the thermosensitivity of the investigated stars depends on the structure of the salt and polymer and on the salt content in the solution. The phase separation temperature decreased with an increase in the hydrophobicity of the polymers, which is caused by both a growth of the side radical size and an elongation of the monomer unit. For NaCl solutions, the phase separation temperature monotonically decreased with growth of salt concentration. In solutions with methylpyridinium p-toluenesulfonate, the dependence of the phase separation temperature on the salt concentration was non-monotonic with minimum at salt concentration corresponding to one salt molecule per one arm of a polymer star. Poly-2-alkyl-2-oxazine and poly-2-alkyl-2-oxazoline stars with a hexaaza[26]orthoparacyclophane core are more sensitive to the presence of salt in solution than the similar stars with a calix[n]arene branching center.

Visualizing thermal distribution through hydrogel confined ionic system

Effective thermal regulation has shown great impacts on tremendous aspects of our life and manufacture. However, the invisible nature of thermal field brings us inconvenience or even security hazard. Herein, we present a method to visualize thermal distribution with the aid of a thermally active material. An ionic liquid with lower critical solution temperature is mixed within hydrogel to demonstrate a hydrogel confined ionic system (HCIS). This particular system turns turbid as the temperature exceeds an established temperature threshold, which is adjustable through applying different concentrations of HCl or NaCl. The system offers straightforward images of the spatial thermal distribution whether simple or sophisticated, which is fully in line with computational simulation. The system is further demonstrated with great promise for the application in fire warning to lower the threat induced by electrical failure. The HCIS opens a practical avenue to visualize thermal distribution and improve our thermal regulation efficiency.

Anion-induced thermoresponsiveness in cationic polycysteine and DNA binding

This study describes the synthesis of an l-cysteine-based water-soluble cationic polypeptide, an investigation of its thermoresponsive behaviour in the presence of added anions and its polyplexation with DNA.

Ionic effects on synthetic polymers: from solutions to brushes and gels

The ionic effects on synthetic polymers have attracted extensive attention due to the crucial role of ions in the determination of the properties of synthetic polymers. This review places the focus on specific ion effects, multivalent ion effects, and ionic hydrophilicity/hydrophobicity effects in synthetic polymer systems from solutions to brushes and gels. The specific ion effects on neutral polymers are determined by both the direct and indirect specific ion-polymer interactions, whereas the ion specificities of charged polymers are mainly dominated by the specific ion-pairing interactions. The ionic cross-linking effect exerted by the multivalent ions is widely used to tune the properties of polyelectrolytes, while the reentrant behavior of polyelectrolytes in the presence of multivalent ions still remains poorly understood. The ionic hydrophilicity/hydrophobicity effects not only can be applied to make strong polyelectrolytes thermosensitive, but also can be used to prepare polymeric nano-objects and to control the wettability of polyelectrolyte brush-modified surfaces. The not well-studied ionic hydrogen bond effects are also discussed in the last section of this review.

Tailoring Polymersome Shape Using the Hofmeister Effect

Reshaping polymersomes remains a challenge for both size and shape control, methodology development, and mechanism understanding, which hindered their application in nanomedicine and nanomachine. Unlike liposome, polymersomes are capable of maintaining their shape due to their rigid and glassy membrane. Here we use the Hofmeister effect to guide the shape control of polymersome by tuning the ion type and concentration. Multiple morphologies such as ellipsoid, tube, disc, stomatocytes, and large compound vesicles are found. These results give evidence of demonstrating that the shape changes are not only induced by osmotic pressure, but also by the interaction with the polymersome membranes. Additionally, this methodology provides a general tool to tailor the shape of polymersome into various morphologies.

Thermoresponsive behavior of poly[trialkyl-(4-vinylbenzyl)ammonium] based polyelectrolytes in aqueous salt solutions

A systematic method to induce thermoresponsive behavior for polycations with salts from the reversed Hofmeister series is introduced.

Ionic Liquid Lignosulfonate: Dispersant and Binder for Preparation of Biocomposite Materials

Ionic liquid lignins are prepared from sodium lignosulfonate by a cation exchange reaction and display glass transition temperatures as low as -13 °C. Diethyleneglycol-functionalized protic cations inhibit lignin aggregation to produce a free-flowing "ionic liquid lignin", despite it being a high-molecular-weight polyelectrolyte. Through this approach, the properties of both lignin and ionic liquids are combined to create a dispersant and binder for cellulose+gluten mixtures to produce small microphases. Biocomposite testing pieces are produced by hot-pressing this mixture, yielding a material with fewer defects and improved toughness in comparison to other lignins. The use of unmodified lignosulfonate, acetylated lignosulfonate, or free ionic liquid for similar materials production yields poorer substances because of their inability to maximize interfacial contact and complexation with cellulose and proteins.

LCST phase behavior of benzo-21-crown-7 with different alkyl chains

The introduction of hydrophobic units into crown ethers can dramatically decrease the critical transition temperature of LCST and realize macroscopic phase separation at low to moderate temperature and concentration. Minor modifications in the chemical structure of crown ethers (benzo-21-crown-7, B21C7s) can effectively control the thermo-responsive properties.

A degradable low molecular weight monomer system with lower critical solution temperature behaviour in water

A degradable thermo-responsive system was prepared and investigated. The degradation behaviour induced by the cleavage process of the thermo-sensitive crown ethers effectively altered the thermo-responsiveness.

Tryptophan-based styryl homopolymer and polyzwitterions with solvent-induced UCST, ion-induced LCST and pH-induced UCST

A multi-stimuli responsive tryptophan-based styryl homopolymer and polyzwitterions with solvent-induced UCST, ion-induced LCST and pH-induced UCST under different conditions are presented.

LCST behavior controlled by size-matching selectivity from low molecular weight monomer systems

LCST behavior was controlled by crown ether–cation recognition motifs via size-matching selectivity.

Chemical Tuning of Zwitterionic Ionic Liquids for Variable Thermophysical Behaviours, Nanostructured Aggregates and Dual-Stimuli Responsiveness

The design and synthesis of a series of zwitterionic ionic liquids (ZILs) to understand the structure-property relationship towards an increase of the thermal stability, a variation of the glass transition temperature, the shape-tuning of nanostructured aggregates and the tuning of the stimuli responsiveness are demonstrated. The substitution reaction of imidazole with various aliphatic and aromatic bromides followed by the reaction of the corresponding substituted imidazoles with bromoalkyl carboxylic acids of varying spacer length produces the ZILs. In aqueous solution, a ZIL molecule either exist in its ionic liquid (substituted imidazolium bromide) form or its zwitterionic (substituted imidazolium alkyl carboxylate) form with an isoelectric point (pI) depending on the pH value of the solution. Upon changing the pH to near or above the pI, the aqueous ZIL solution undergoes transition from a transparent to a turbid phase due to the formation of insoluble hierarchical nanostructured aggregates of various morphologies, such as spheres, tripods, tetrapods, fern-like, flower-like, dendrites etc. depending on the pH of the solution and the nature of the alkyl/vinyl/aryl substituents. Upon heating the solution a phase transition occurs from turbid to transparent, exhibiting a distinct reversible upper critical solution temperature (UCST)-type cloud point (T_cp ). It is observed that the cloud point varies with the nature of the substituent, an increase of the concentration of the ZIL as well as with changes of the pH of the solution.

Poly(ionic liquid)s Based Brush Type Nanomotor

A brush type nanomotor was fabricated via assembly assistant polymerization of poly(ionic liquid) and surface grafting polymerization. The method for large-scale fabrication of brush nanomotors with soft surfaces is described. These soft locomotive particles are based on core-shell brush nanoparticles assembled from poly(ionic liquid) as core and thermoresponsive PNIPAM as brush shells on which platinum nanoparticle (PtNP) were grown in situ. The particles show non-Brownian motion in H₂O₂ solution.

Insights into the thermal phase transition behavior of a gemini dicationic polyelectrolyte in aqueous solution

The thermal-induced phase transition behavior of a LCST-type poly(ionic liquid) (PIL) aqueous solution with gemini-cationic structure, poly[(1,8-octanediyl-bis(tri-n-butylphosphonium)4-styrene sulfonate)] (P[SS-P2]), was investigated in this paper. Based on the calorimetric measurements, a unique dependence of transition points on concentration was found in P[SS-P2] aqueous solution compared to its mono-cationic PIL and [SS-P2] aqueous solution. Optical microscopy showed that globular microscopic droplets were formed during the phase transition, suggesting that gemini dications and the possible dynamic ionic bonds may facilitate the liquid-liquid phase separation (LLPS) in P[SS-P2] aqueous solution. Temperature-variable 1H NMR and FT-IR investigations manifested that the dehydration of anionic chains instead of the dehydration of dications served as the driving force of the phase separation in the P[SS-P2] aqueous solution, implying that the polymerized anions tended to aggregate together first and lay in the core with dications distributed around the globules at the end of the transition process. Notably, considering that the SO3 groups in the gemini-cationic system tended to be distributed around the surface of collapsed anionic main chains rather than be wrapped into the aggregates, it is supposed that dynamic ionic bonding between dication and anionic backbones was distributed in the periphery of the globules and acted as the "cross-linkers", which enhanced the stability of regular droplets after the phase transition in P[SS-P2] aqueous solution.

PMMA-g-OEtOx Graft Copolymers: Influence of Grafting Degree and Side Chain Length on the Conformation in Aqueous Solution

Depending on the degree of grafting (DG) and the side chain degree of polymerization (DP), graft copolymers may feature properties similar to statistical copolymers or to block copolymers. This issue is approached by studying aqueous solutions of PMMA-g-OEtOx graft copolymers comprising a hydrophobic poly(methyl methacrylate) (PMMA) backbone and hydrophilic oligo(2-ethyl-2-oxazoline) (OEtOx) side chains. The graft copolymers were synthesized via reversible addition-fragmentation chain transfer (RAFT) copolymerization of methyl methacrylate (MMA) and OEtOx-methacrylate macromonomers of varying DP. All aqueous solutions of PMMA-g-OEtOx (9% ≤ DG ≤ 34%; 5 ≤ side chain DP ≤ 24) revealed lower critical solution temperature behavior. The graft copolymer architecture significantly influenced the aggregation behavior, the conformation in aqueous solution and the coil to globule transition, as verified by means of turbidimetry, dynamic light scattering, nuclear magnetic resonance spectroscopy, and analytical ultracentrifugation. The aggregation behavior of graft copolymers with a side chain DP of 5 was significantly affected by small variations of the DG, occasionally forming mesoglobules above the cloud point temperature (T_cp), which was around human body temperature. On the other hand, PMMA-g-OEtOx with elongated side chains assembled into well-defined structures below the T_cp (apparent aggregation number (N_agg = 10)) that were able to solubilize Disperse Orange 3. The thermoresponsive behavior of aqueous solutions thus resembled that of micelles comprising a poly(2-ethyl-2-oxazoline) (PEtOx) shell (T_cp > 60 °C).

Polypropylene Nonwoven Fabric@Poly(ionic liquid)s for Switchable Oil/Water Separation, Dye Absorption, and Antibacterial Applications

Pollutants in wastewater include oils, dyes, and bacteria, making wastewater cleanup difficult. Multifunctional wastewater treatment media consisting of poly(ionic liquid)-grafted polypropylene (PP) nonwoven fabrics (PP@PIL) are prepared by a simple and scalable surface-grafting process. The fabricated PP@PIL fabrics exhibit impressive switchable oil/water separation (η>99 %) and dye absorption performance (q=410 mg g^-1 ), as well as high antibacterial properties. The oil/water separation can be easily switched by anion exchanging of the PIL segments. Moreover, the multiple functions (oil/water separation, dye absorption, and antibacterial properties) occurred at the same time, and did not interfere with each other. The multifunctional fibrous filter can be easily regenerated by washing with an acid solution, and the absorption capacity is maintained after many recycling tests. These promising features make PIL-grafted PP nonwoven fabric a potential one-step treatment for multicomponent wastewater.

Ultrasound- and Thermo-Responsive Ionic Liquid Polymers

Poly(sodium 2-acrylamido-2-methylpropanesulfonate) (PAMPSNa) was prepared via reversible addition-fragmentation chain transfer (RAFT) radical polymerization. An ionic liquid polymer (PAMPSP4448) was then prepared by exchanging the pendant counter cation from sodium (Na⁺) to tributyl-n-octylphosphonium (P4448⁺). We studied the ultrasound- and thermo-responsive behaviors of PAMPSP4448 in water. When the aqueous PAMPSP4448 solution was heated from 5 to 50 °C, the solution was always transparent with 100% transmittance. Unimers and interpolymer aggregates coexisted in water in the temperature range 5⁻50 °C. Generally, hydrogen bonding interactions are broken as the temperature increases due to increased molecular motion. Above 25 °C, the size of the interpolymer aggregates decreased, because hydrophobic interactions inside them were strengthened by dehydration accompanying cleavage of hydrogen bonds between water molecules and the pendant amide or sulfonate groups in PAMPSP4448. Above 25 °C, sonication of the aqueous solution induced an increase in the collision frequency of the aggregates. This promoted hydrophobic interactions between the aggregates to form larger aggregates, and the aqueous solution became turbid. When the temperature was decreased below 8 °C, hydrogen bonds reformed between water molecules and the pendant amide or sulfonate groups, allowing PAMPSP4448 to redissolve in water to form a transparent solution. The solution could be repeatedly controlled between turbidity and transparency by sonication and cooling, respectively.

Supramolecular control over pillararene-based LCST phase behaviour

Based on the supramolecular interactions between pillar[5]arenes and ionic liquids, supramolecular control was successfully introduced into thermo-responsive systems to adjust LCST phase behaviour in water.

Accelerating the acidic degradation of a novel thermoresponsive polymer by host–guest interaction

Carboxylate modified pillar arenes can not only shift the LCST of acetalized polymers but can also accelerate their hydrolysis under acidic conditions.

Polymeric crown ethers: LCST behavior in water and stimuli-responsiveness

A crown ether-functionalized poly(vinyl alcohol) (PVA) system shows lower critical solution temperature (LCST) phase separation behavior in water.

Methionine-based cationic polypeptide/polypeptide block copolymer with triple-stimuli responsiveness: DNA polyplexation and phototriggered release

This work describes the synthesis of a multi-stimuli responsive methionine-based cationic polypeptide and its polypeptide block copolymer, followed by subsequent DNA polyplexation and phototriggered release.

Hydrogels with a Memory: Dual-Responsive, Organometallic Poly(ionic liquid)s with Hysteretic Volume-Phase Transition

We report on the synthesis and structure-property relations of a novel, dual-responsive organometallic poly(ionic liquid) (PIL), consisting of a poly(ferrocenylsilane) backbone of alternating redox-active, silane-bridged ferrocene units and tetraalkylphosphonium sulfonate moieties in the side groups. This PIL is redox responsive due to the presence of ferrocene in the backbone and also exhibits a lower critical solution temperature (LCST)-type thermal responsive behavior. The LCST phase transition originates from the interaction between water molecules and the ionic substituents and shows a concentration-dependent, tunable transition temperature in aqueous solution. The PIL's LCST-type transition temperature can also be influenced by varying the redox state of ferrocene in the polymer main chain. As the polymer can be readily cross-linked and is easily converted into hydrogels, it represents a new dual-responsive materials platform. Interestingly, the as-formed hydrogels display an unusual, strongly hysteretic volume-phase transition indicating useful thermal memory properties. By employing the dispersing abilities of this cationic PIL, CNT-hydrogel composites were successfully prepared. These hybrid conductive composite hydrogels showed bi-stable states and tunable resistance in heating-cooling cycles.

Toward the two-step microdynamic phase transition mechanism of an oligo(ethylene glycol)methacrylate-based copolymer with a LCST-type poly(ionic liquid) block

A new LCST-type thermoresponsive polyelectrolyte P[P_4,4,4,4][SS], poly(tetrabutyl phosphonium styrene sulfonate), was introduced to PMEO₂MA (poly(2-(2-methoxyethoxy)ethyl methacrylate)) via RAFT polymerization, in order to explore the transition behavior of the block copolymer PMEO₂MA-b-P[P_4,4,4,4][SS] with two distinct LCST-type segments. A relatively sharp LCST-type phase transition with only one transition point is observed in the turbidity curves, while the whole phase transition is completely different from the micro perspective. The phase transition temperature range is relatively broad, according to the unsynchronized changes of different protons of the two blocks in the temperature-variable ¹H NMR analysis. From PCMW analysis, it is found that there exists an obvious two-step phase transition behavior, especially in the region of the C-H groups. Accordingly, we divided the whole transition process into two subregions: 20-40 °C and 40-55 °C in 2Dcos analysis. At the first stage of 20-40 °C, the CH₃ groups mainly belonging to the backbones of PMEO₂MA blocks have the earliest response to the heating and drive the first step of the dehydration process of PMEO₂MA-b-P[P_4,4,4,4][SS], resulting in the formation of an intermediate micelle state composed of the collapsed PMEO₂MA core and hydrophilic P[P_4,4,4,4][SS] corona. In particular, the conformational changes and the more compact structures due to the interaction between the C[double bond, length as m-dash]O groups and P[P_4,4,4,4][SS] segments (ν(C[double bond, length as m-dash]OD₂O-PILs)) were observed using IR analysis. With the continual increase of the temperature, when the second temperature range of 40-55 °C is reached, the P[P_4,4,4,4][SS] segments start to collapse and expel the water molecules, driven by the anions of the poly(ionic liquid)s, with the phosphonium cations being distributed over the relatively hydrophilic outside.