High Molecular Weight Block Copolymers by Sequential Monomer Addition via Cu(0)-Mediated Living Radical Polymerization (SET-LRP): An Optimized Approach

From Frank-Kasper, Quasicrystals, and Biological Membrane Mimics to Reprogramming In Vivo the Living Factory to Target the Delivery of mRNA with One-Component Amphiphilic Janus Dendrimers

This Perspective is dedicated to the 25th Anniversary of Biomacromolecules. It provides a personal view on the developing field of the polymer and biology interface over the 25 years since the journal was launched by the American Chemical Society (ACS). This Perspective is meant to bridge an article published in the first issue of the journal and recent bioinspired developments in the laboratory of the corresponding author. The discovery of supramolecular spherical helices self-organizing into Frank-Kasper and quasicrystals as models of icosahedral viruses, as well as of columnar helical assemblies that mimic rodlike viruses by supramolecular dendrimers, is briefly presented. The transplant of these assemblies from supramolecular dendrimers to block copolymers, giant surfactants, and other self-organized soft matter follows. Amphiphilic self-assembling Janus dendrimers and glycodendrimers as mimics of biological membranes and their glycans are discussed. New concepts derived from them that evolved in the in vivo targeted delivery of mRNA with the simplest one-component synthetic vector systems are introduced. Some synthetic methodologies employed during the synthesis and self-assembly are explained. Unraveling bioinspired applications of novel materials concludes this brief 25th Anniversary Perspective of Biomacromolecules.

Rationally designed block copolymer-based nanoarchitectures: An emerging paradigm for effective drug delivery

Various polymeric materials have been investigated to produce unique modes of delivery for drug modules to achieve either temporal or spatial control of bioactives delivery. However, after intravenous administration, phagocytic cells quickly remove these nanostructures from the systemic circulation via the reticuloendothelial system (RES). To overcome these concerns, ecofriendly block copolymers are increasingly being investigated as innovative carriers for the delivery of bioactives. In this review, we discuss the design, fabrication techniques, and recent advances in the development of block copolymers and their applications as drug carrier systems to improve the physicochemical and pharmacological attributes of bioactives.

Photocrosslinkable Polymeric Bicontinuous Microemulsions

We present an approach to photocrosslink bicontinuous microemulsions derived from ternary blends of poly(methoxyethyl acrylate) (PM, Mn = 4200 g/mol), poly(hexyl methacrylate-co-coumarin methacrylate) (PHC, Mn = 6800 g/mol), and PM-b-PHC diblock polymer (Mn = 19,400 g/mol) in a phase-selective manner, enabling structural characterization at an unprecedented level of detail. This strategy utilizes the [2 + 2] photodimerization reaction of coumarin derivatives to covalently crosslink blends without the use of harsh reagents or disruptive thermal treatment, thus preserving the intricate network structure throughout curing. The resulting crosslinked bicontinuous microemulsions exhibited rubbery behavior at elevated temperatures, achieving an elastic shear modulus of nearly 1 MPa at 70 °C, owing to the presence of the three-dimensional co-continuous network morphology. The dimensional stabilization afforded by crosslinking further allowed the microstructure to be directly imaged by scanning electron microscopy and atomic force microscopy. Contrary to recent theoretical findings, the BμE appears in a wide temperature and compositional window, suggesting that it is a robust feature of these blends. As a proof of concept demonstrating both the utility of bicontinuous microemulsion-derived materials and versatility of this strategy toward broader applications in energy storage and transport, the uncrosslinked portion of a cured blend was extracted by washing and replaced with an ionic liquid; the resultant heterogeneous solid electrolyte exhibited a room-temperature conductivity of 2 mS/cm, approximately one-quarter that of the pure ionic liquid.

Strong Anionic/Charge-Neutral Block Copolymers from Cu(0)-Mediated Reversible Deactivation Radical Polymerization

Despite recent developments in controlled polymerization techniques, the straightforward synthesis of block copolymers that feature both strong anionic and charge-neutral segments remains a difficult endeavor. In particular, solubility issues may arise during the direct synthesis of strong amphiphiles and typical postpolymerization deprotection often requires harsh conditions. To overcome these challenges, we employed Cu(0)-mediated reversible deactivation radical polymerization (Cu(0)-RDRP) on a hydrophobic isobutoxy-protected 3-sulfopropyl acrylate. Cu(0)-RDRP enables the rapid synthesis of the polymer, reaching high conversions and low dispersities while using a single solvent system and low amounts of copper species. These macromolecules are straightforward to characterize and can subsequently be deprotected in a mild yet highly efficient fashion to expose their strongly charged nature. Furthermore, a protected sulfonate segment could be grown from a variety of charge-neutral macroinitiators to produce, after the use of the same deprotection chemistry, a library of amphiphilic, double-hydrophilic as well as thermoresponsive block copolymers (BCPs). The ability of these various BCPs to self-assemble in aqueous media was further studied by dynamic light scattering, ζ-potential measurements as well as atomic force and electron microscopy.

Linear Block Copolymer Synthesis

Block copolymers form the basis of the most ubiquitous materials such as thermoplastic elastomers, bridge interphases in polymer blends, and are fundamental for the development of high-performance materials. The driving force to further advance these materials is the accessibility of block copolymers, which have a wide variety in composition, functional group content, and precision of their structure. To advance and broaden the application of block copolymers will depend on the nature of combined segmented blocks, guided through the combination of polymerization techniques to reach a high versatility in block copolymer architecture and function. This review provides the most comprehensive overview of techniques to prepare linear block copolymers and is intended to serve as a guideline on how polymerization techniques can work together to result in desired block combinations. As the review will give an account of the relevant procedures and access areas, the sections will include orthogonal approaches or sequentially combined polymerization techniques, which increases the synthetic options for these materials.

ABC-Type Triblock Copolyacrylamides via Copper-Mediated Reversible Deactivation Radical Polymerization

The aqueous Cu(0)-mediated reversible deactivation radical polymerization (RDRP) of triblock copolymers with two block sequences at 0.0 °C is reported herein. Well-defined triblock copolymers initiated from PHEAA or PDMA, containing (A) 2-hydroxyethyl acrylamide (HEAA), (B) N-isopropylacrylamide (NIPAM) and (C) N, N-dimethylacrylamide (DMA), were synthesized. The ultrafast one-pot synthesis of sequence-controlled triblock copolymers via iterative sequential monomer addition after full conversion, without any purification steps throughout the monomer additions, was performed. The narrow dispersities of the triblock copolymers proved the high degree of end-group fidelity of the starting macroinitiator and the absence of any significant undesirable side reactions. Controlled chain length and extremely narrow molecular weight distributions (dispersity ~1.10) were achieved, and quantitative conversion was attained in as little as 52 min. The full disproportionation of CuBr in the presence of Me6TREN in water prior to both monomer and initiator addition was crucially exploited to produce a well-defined ABC-type triblock copolymer. In addition, the undesirable side reaction that could influence the living nature of the system was investigated. The ability to incorporate several functional monomers without affecting the living nature of the polymerization proves the versatility of this approach.

Controlling dispersity in aqueous atom transfer radical polymerization: rapid and quantitative synthesis of one-pot block copolymers

The dispersity (Đ) of a polymer is a key parameter in material design, and variations in Đ can have a strong influence on fundamental polymer properties. Despite its importance, current polymerization strategies to control Đ operate exclusively in organic media and are limited by slow polymerization rates, moderate conversions, significant loss of initiator efficiency and lack of dispersity control in block copolymers. Here, we demonstrate a rapid and quantitative method to tailor Đ of both homo and block copolymers in aqueous atom transfer radical polymerization. By using excess ligand to regulate the dissociation of bromide ions from the copper deactivator complexes, a wide range of monomodal molecular weight distributions (1.08 < Đ < 1.60) can be obtained within 10 min while achieving very high monomer conversions (∼99%). Despite the high conversions and the broad molecular weight distributions, very high end-group fidelity is maintained as exemplified by the ability to synthesize in situ diblock copolymers with absolute control over the dispersity of either block (e.g. low Đ → high Đ, high Đ → high Đ, high Đ → low Đ). The potential of our approach is further highlighted by the synthesis of complex pentablock and decablock copolymers without any need for purification between the iterative block formation steps. Other benefits of our methodology include the possibility to control Đ without affecting the M n, the interesting mechanistic concept that sheds light onto aqueous polymerizations and the capability to operate in the presence of air.

Synthesis and [2+2]-photodimerisation of monothiomaleimide functionalised linear and brush-like polymers

[2+2]-Photodimerisation of monothiomaleimides has been demonstrated on functionalised linear and brush-like polymers. In water/acetonitrile (95 : 5) mixtures the rate of reaction is accelerated significantly by irradiation of the thiomaleimide end group (λmax = 350 nm) with UV light, reaching full conversion within 10 minutes.

Can We Push Rapid Reversible Deactivation Radical Polymerizations toward Immortality?

All reversible deactivation radical polymerization (RDRP) processes require a compromise between the rate of polymerization, which requires a high radical concentration, and retention of chain end functionality, which requires a low radical concentration. Here, we demonstrate that this compromise may be partially averted where fast deactivation of the propagating radical occurs. It is shown that, contrary to the predictions of classical reaction kinetics, when the probability density functions of the termination reactions are adjusted to take into account the time needed for radical diffusion, a reduction in the extent of termination can be expected if chain deactivation is rapid. We subsequently use this framework to explain experimental results in the copper(0)-mediated polymerization of acrylamide. The main concept put forward in the paper questions the commonly held assumptions of the limitations of RDRP processes and suggests the ability for a seemingly impossible level of control of radical reactions.

Synthetic approaches for multiblock copolymers

Multiblock copolymers (MBCs) are an emerging class of synthetic polymers that exhibit different macromolecular architectures and behaviours to those of homopolymers or di/triblock copolymers.

An ε-caprolactone-derived 2-oxazoline inimer for the synthesis of graft copolymers

An inimer-like structure that consists of a 2-oxazoline ring for cationic ring opening polymerisation and a typical alpha-bromo ester initiator for Cu-RDRP has been synthesised using ε-Caprolactone as the starting material.

Bottom-up design of model network elastomers and hydrogels from precise star polymers

Well-defined high-molecular weight star polymers based on low-T_g water-soluble polymers enable bottom-up design of model network elastomers and functional hydrogels.

An efficient process for the Cu(0)-mediated synthesis and subsequent chain extension of poly(methyl acrylate) macroinitiator

A process combining a continuous tubular and a semi-batch reactor is established as an efficient method for the synthesis of block copolymers.

Exploiting Macromolecular Design To Optimize the Antibacterial Activity of Alkylated Cationic Oligomers

There is growing interest in synthetic polymers which co-opt the structural features of naturally occurring antimicrobial peptides. However, our understanding of how macromolecular architecture affects antibacterial activity remains limited. To address this, we investigated whether varying architectures of a series of block and statistical co-oligomers influenced antibacterial and hemolytic activity. Cu(0)-mediated polymerization was used to synthesize oligomers constituting 2-(Boc-amino)ethyl acrylate units and either diethylene glycol ethyl ether acrylate (DEGEEA) or poly(ethylene glycol) methyl ether acrylate units with varying macromolecular architecture; subsequent deprotection produced primary amine functional oligomers. Further guanylation provided an additional series of antimicrobial candidates. Both chemical composition and macromolecular architecture were shown to affect antimicrobial activity. A broad spectrum antibacterial oligomer (containing guanidine moieties and DEGEEA units) was identified that possessed promising activity (MIC = 2 μg mL^-1) toward both Gram-negative and Gram-positive bacteria. Bacterial membrane permeabilization was identified as an important contributor to the mechanism of action.

The Chain Length Distribution of an Ideal Reversible Deactivation Radical Polymerization

The chain length distribution (CLD) of a reversible deactivation radical polymerization at full conversion is shown to be a negative binomial distribution with parameters that are simple functions of the number-average degree of polymerization and either the chain transfer constant (in the case of polymerizations that incorporate a reversible chain transfer step) or the concentrations of dormant polymer chains and deactivating agent and the rate constants of propagation and deactivation (other types of RDRP). Expressions for the CLD at intermediate conversions are also derived, and shown to be consistent with known expressions for the number-average degree of polymerization and dispersity. It is further demonstrated that these CLDs are well-approximated by negative binomial distributions with appropriate choice of parameters. The negative binomial distribution is thus a useful model for CLDs of reversible deactivation radical polymerizations.

Stress-induced colouration and crosslinking of polymeric materials by mechanochemical formation of triphenylimidazolyl radicals

Under mechanical stress, the hexaarylbiimidazole (HABI) motif can cleave to triphenylimidazolyl radicals when incorporated into a polymer matrix. The mechanically produced coloured radicals can initiate secondary radical reactions yielding polymer networks. Thus, the HABI mechanophore combines optical reporting of bond scission and reinforcement of polymers in a single molecular moiety.

'Switch' catalysis: from monomer mixtures to sequence-controlled block copolymers

A 'Switch' catalysis method is reviewed whereby a single catalyst is switched between ring-opening polymerization and ring-opening copolymerization cycles. It allows the efficient synthesis of block copolymers from mixtures of lactones, epoxides, anhydrides and carbon dioxide. In order to use and further develop such 'Switch' catalysis, it is important to understand how to monitor the catalysis and characterize the product block copolymers. Here, a step-by-step guide to both the catalysis and the identification of block copolymers is presented.This article is part of a discussion meeting issue 'Providing sustainable catalytic solutions for a rapidly changing world'.

Sequence-definition from controlled polymerization: the next generation of materials

An overview is given on the state-of-the-art in synthesis of sequence-controlled and sequence-defined oligomers and polymers.

Polymerization of acrylates based on n-type organic semiconductors using Cu(0)-RDRP

Three acrylic monomers have been prepared based on organic semiconductor motifs commonly used as n-type materials in organic light-emitting diodes (OLEDs) and organic thin-film transistors (OTFTs) and polymerized by Cu(0)-RDRP.

Reverse-phase high performance liquid chromatography (RP-HPLC) as a powerful tool to characterise complex water-soluble copolymer architectures

A novel analytical method, based on RP-HPLC, for the characterisation of monomer distribution in charged water-soluble copolymers.

Acetone: a solvent or a reagent depending on the addition order in SET-LRP

The importance of reagent order in biphasic SET-LRP in acetone/water mixtures is shown.

Cu(0)-RDRP of methacrylates in DMSO: importance of the initiator

The controlled radical polymerization of methacrylates via Cu(0)-mediated RDRP is challenging in comparison to acrylates with most reports illustrating higher dispersities, lower monomer conversions and poorer end group fidelity relative to the acrylic analogues.

Cu(0)-RDRP of styrene: balancing initiator efficiency and dispersity

The optimisation of all components within Cu(0)-wire mediated polymerisation of styrene is illustrated yielding well-defined polystyrene with enhanced initiator efficiency and dispersity at higher molecular weights.

Cu(0)-RDRP of acrylates based on p-type organic semiconductors

A series of four acrylic monomers were synthesized based on p-type organic semiconductor motifs found commonly in organic light-emitting diodes (OLEDs), organic thin-film transistors (OTFTs) and organic photovoltaics (OPVs).

The downside of dispersity: why the standard deviation is a better measure of dispersion in precision polymerization

Dispersity gives a deceptively rosy picture of the extent of dispersion in molecular weight distributions. For complex structures or relatively narrow molecular weight distributions, the standard deviation of the number distribution is a better choice.

One-Pot Synthesis of Charged Amphiphilic Diblock and Triblock Copolymers Via High-Throughput Cu(0)-Mediated Polymerization

Block copolymers containing functionalized monomers, for example those containing charged groups, can be used for many purposes, one of which is the design of polymeric supramolecular materials based on electrostatic interactions. In this paper the synthesis of diblock copolymers and ABA-triblock copolymers containing poly(n-butyl acrylate) as a first or middle block and poly(2-(dimethylamino)ethyl acrylate), poly(1-ethoxyethyl acrylate) and poly(1-ethoxyethyl-2-carboxyethyl acrylate) as second or outer blocks, resulting in block copolymers that can contain positive or negative charges, is reported. The polymerizations were performed and optimized via one-pot sequential monomer addition reactions via Cu(0)-mediated polymerization using an automated parallel synthesizer. Different initiators, monomer concentrations and polymerization times were tested. While a bromide-containing initiator led to the best results for most monomers, when polymerizing 2-(dimethylamino)ethyl acrylate the use of a chloride-containing initiator was necessary. Due to the slower polymerization using this initiator, a longer polymerization time was needed before addition of the second monomer. Using the optimized conditions, the diblock and triblock copolymers could be synthesized with good control over molecular weight and dispersities around 1.1 were obtained.