Synthesis of π-Conjugated Polymers Containing Phosphole Units in the Main Chain by Reaction of an Organometallic Polymer Having a Titanacyclopentadiene Unit

Editing of polymer backbones

Polymers are at the epicentre of modern technological progress and the associated environmental pollution. Considerations of both polymer functionality and lifecycle are crucial in these contexts, and the polymer backbone - the core of a polymer - is at the root of these considerations. Just as the meaning of a sentence can be altered by editing its words, the function and sustainability of a polymer can also be transformed via the chemical modification of its backbone. Yet, polymer modification has primarily been focused on the polymer periphery. In this Review, we focus on the transformations of the polymer backbone by defining some concepts fundamental to this topic (for example, 'polymer backbone' and 'backbone editing') and by collecting and categorizing examples of backbone editing scattered throughout a century's worth of chemical literature, and outline critical directions for further research. In so doing, we lay the foundation for the field of polymer backbone editing and hope to accelerate its development.

Parallel synthesis of donor-acceptor π-conjugated polymers by post-element transformation of organotitanium polymer

The donor-acceptor type π-conjugated polymers having heterole units were prepared by the reaction of a regioregular organometallic polymer having both reactive titanacyclopentadiene and electron-donor thiophene-2,5-diyl units in the main chain with electrophiles such as diphenyltin dichloride, dichlorophenylphosphine, and diiodophenylarsine. For example, a polymer having electron-accepting phosphole unit was obtained in 54% yield whose number-average molecular weight (Mn) and molecular weight distribution (Mw/Mn) were estimated as 3,000 and 1.9, respectively. The obtained polymer exhibits a high highest occupied molecular orbital (HOMO) and low lowest unoccupied molecular orbital (LUMO) energy levels (-5.13 eV and -3.25 eV, respectively) due to the electron-donating thiophene and electron-accepting phosphole units. Reflecting upon the alternating structure of thiophene and phosphole, the polymer exhibits a band gap energy level (Eg) of 1.78 eV which is narrower than that of a derivative of poly(thiophene) (Eg = 2.25 eV).

Synthesis and optoelectronic properties of air-stable π-conjugated polymers containing both thiophene-2,5-diyl and fused titanacycle units

π-Conjugated poly(arylene ethynylene)s containing both thiophene-2,5-diyl and fused metallacycles units in their alternating sequence were synthesized and their optoelectronic features were studied by the UV-vis spectra.

π-Conjugated stannole copolymers synthesised by a tin-selective Stille cross-coupling reaction

The synthesis of four well-defined conjugated polymers TStTT1-4 containing unusual heterocycle units in the main chain, namely stannole units as building blocks, is reported. The stannole-thiophenyl copolymers were generated by tin-selective Stille coupling reactions in nearly quantitative yields of 94% to 98%. NMR data show that the tin atoms in the rings remain unaffected. Weight-average molecular weights (M w) were high (4900-10 900 Da and 9600-21 900 Da); and molecular weight distributions (M w/M n) were between 1.9 and 2.3. The new materials are strongly absorbing and appear blue-black to purple-black. All iodothiophenyl-stannole monomers St1-4 and the resulting bisthiophenyl-stannole copolymers TStTT1-4 were investigated with respect to their optoelectronic properties. The absorption maxima of the polymers are strongly bathochromically shifted compared to their monomers by about 76 nm to 126 nm in chloroform. Density functional theory calculations support our experimental results of the single stannoles St1-4 showing small HOMO-LUMO energy gaps of 3.17-3.24 eV. The optical band gaps of the polymers are much more decreased and were determined to be only 1.61-1.79 eV. Furthermore, both the molecular structures of stannoles St2 and St3 from single crystal X-ray analyses and the results of the geometry optimisation by DFT confirm the high planarity of the molecules backbone leading to efficient conjugation within the molecule.

An air-stable organometallic polymer containing titanafluorene moieties obtained by the Sonogashira-Hagihara cross-coupling polycondensation

The synthesis of a polymer containing alternating titanafluorene and arylene ethynylene moieties is described. The polymerization of a 2,7-dibromo-9-titanafluorene derivative with 1,4-dioctyloxy-2,5-diethynylbenzene is carried out at 70 °C for 48 h in tetrahydrofuran (THF) in the presence of palladium dichloride/4,5-bis(diphenylphosphino)-9,9-dimethylxanthene as a catalyst and diisopropylamine as a base to produce a dark red polymer. The polymer thus obtained is soluble in organic solvents and stable towards both air and moisture. In the UV-vis absorption spectrum of the polymer, the absorption maxima (λ_max) are observed at 321 nm and 395 nm, which are bathochromically shifted compared to those of a model compound of the repeating unit, a 2,7-bis(phenylethynyl)titanafluorene derivative (λ_max = 309 nm and 364 nm). The optical band gap (E_g) of the polymer is estimated to be 2.8 eV on the basis of the absorption onset, which is narrower than that of the model compound (3.1 eV).

Tellurophene-containing π-conjugated polymers with unique heteroatom–heteroatom interactions by post-element-transformation of an organotitanium polymer

A unique π-conjugated tellurophene-containing polymer that possesses fully coplanar ring units through a tellurium–oxygen interaction, was prepared by the post-element-transformation of a titanacyclopentadiene-containing reactive precursor.

Redox chemistry of π-extended tellurophenes

In the past decade, the incorporation of tellurophene motifs into organic devices has been a promising strategy for the design of advanced materials. However, fundamental redox behavior of tellurophene-containing materials have never been comprehensively explored. Here, we report unique redox behavior of π-extended tellurophenes. The facile coordination of solvent molecules and/or anions becomes evident, in addition to the attachment of nucleophilic halides. This indicates that the tellurium center in oxidized 2,5-diphenyltellurophene is highly electron-deficient and easily yields coordinated structures. This coordination appears to trap the positive charge on the tellurium center rather than delocalizing it over the π-system. When no coordinating counter ion is present, however, oxidation appears to be delocalized over the entire π-system. Additionally, by using more delocalized structures, we show that coordination and charge-delocalization can co-exist. These results provide important insights to understand the properties of tellurophene-containing molecules and materials with extended π-systems.

Synthesis of Stannole-Containing π-Conjugated Polymers by Post-Element Transformation of Organotitanium Polymer

The synthesis of stannole-2,5-diyl-containing π-conjugated polymers by the post-element transformation of a regioregular organotitanium polymer is described. For example, a 1,1-diphenylstannole-containing polymer is obtained in 83% yield by the reaction of a regioregular organotitanium polymer, which is prepared from 1,4-bis(2-ethylhexyloxy)-2,5-diethynylbenzene and a low-valent titanium complex with diphenyltin dichloride at -50 °C to ambient temperature. The number-average molecular weight and molecular weight distribution (M_n and M_w /M_n ) of the stannole-containing polymer are estimated as 4800 and 1.8, respectively. The obtained polymer is found to have the extended π-conjugated backbone and relatively low-lying lowest unoccupied molecular orbital (LUMO) energy level (-3.12 eV), which is supported by its UV-vis absorption spectrum and cyclic voltammetric (CV) analysis. In addition, the stannole-containing polymer is found to be applicable to a chemosensor for fluoride anion where the color and photoluminescence intensity of the polymer solution exhibits a distinct change in the presence of a fluoride anion.

The Dawn of Functional Organoarsenic Chemistry

Organoarsenic chemistry was actively studied until the middle of 20th century. Although various properties of organoarsenic compounds have been computationally predicted, for example, frontier orbital levels, aromaticity, and inversion energies, serious concern to the danger of their synthetic processes has restricted experimental studies. Conventional synthetic routes require volatile and toxic arsenic precursors. Recently, nonvolatile intermediate transformation (NIT) methods have been developed to safely access functional organoarsenic compounds. Important intermediates in the NIT methods are cyclooligoarsines, which are prepared from nonvolatile inorganic precursors. In particular, the new approach has realized experimental studies on conjugated arsenic compounds: arsole derivatives. The elucidation of their intrinsic properties has triggered studies on functional organoarsenic chemistry. As a result, various kinds of arsenic-containing π-conjugated molecules and polymers have been reported for the last few years. In this minireview, progress of this recently invigorated field is overviewed.

Metallacyclopentadienes: synthesis, structure and reactivity

Metallacyclopentadienes, which possess two M-C(sp²) bonds and feature the structure of M(C[upper bond 1 start]R¹[double bond, length as m-dash]CR²-CR³[double bond, length as m-dash]C[upper bond 1 end]R⁴), are an important class of five-membered metallacycles. They are considered as both reactive intermediates in the stoichiometric and catalytic transformations of organic molecules and useful precursors to main group element compounds, and have received considerable attention in organometallic chemistry, coordination chemistry and synthetic organic chemistry over the past six decades because of their unique metallacyclic structure. This review comprehensively presents the synthesis, structure and reactivity of the s-, p-, d- and f-block metallacyclopentadienes distributed in the whole periodic table. In addition, their application in synthetic organic chemistry and polymer chemistry is summarized. This review aims to be beneficial for the design and synthesis of novel metallacyclopentadienes, and for promoting the rapid development of metallacyclic chemistry.

Luminescent color tuning with polymer films composed of boron diiminate conjugated copolymers by changing the connection points to comonomers

The boron diiminate polymers with variable connection points and optical properties were synthesized.

Synthesis of Aggregation-Induced Emission-Active Conjugated Polymers Composed of Group 13 Diiminate Complexes with Tunable Energy Levels via Alteration of Central Element

Conjugated polymers containing boron and gallium diiminate complexes were prepared with various electron-donating comonomers via pre- and post-complexation methods, respectively. From a comparison of emission quantum yields between solution and film states, it was seen that all polymers containing group 13 elements possessed an aggregation-induced emission property. Additionally, the frontier orbital energies and the optical and electrochemical properties of the polymers can be tuned by altering a central element at the complex moieties as well as by changing a comonomer unit. In particular, it was demonstrated that the gallium atom can contribute to stabilizing the energy levels of the lowest unoccupied molecular orbitals, resulting in narrow band gaps of the conjugated polymers. This study presents the potential of gallium not only for preparing solid-state emissive conjugated polymers but also for fabricating low-band gap materials by employing the conjugated ligand.

Construction and properties of a light-harvesting antenna system for phosphorescent materials based on oligofluorene-tethered Pt–porphyrins

Tetramerous molecular assemblies composed of four oligofluorenes as a light-harvesting antenna (LHA) and a Pt–porphyrin core as a phosphorescent chromophore were designed and synthesized for obtaining efficient phosphorescent materials.

Development of emissive aminopentaazaphenalene derivatives employing a design strategy for obtaining luminescent conjugated molecules by modulating the symmetry of molecular orbitals with substituent effects

This communication describes the transformation of a non-emissive heterocycle into a luminophore via modulation of molecular orbitals by the introduction of dialkylamine group.

Synthesis and characterization of metallo-supramolecular polymers

The incorporation of metal centers into the backbone of polymers has led to the development of a broad range of organometallic and coordination compounds featuring properties that are relevant for potential applications in diverse areas of research, ranging from energy storage/conversion to bioactive or self-healing materials. In this review, the basic concepts and synthetic strategies leading to these types of materials as well as the scope of available characterization techniques will be summarized and discussed.

An experimental study on arsoles: structural variation, optical and electronic properties, and emission behavior

The attractive properties of arsoles have been theoretically studied, while experimental studies have been avoided. The practical synthesis of arsoles has realized not only the experimental proof but also novel observation.

Facile synthesis and properties of dithieno[3,2-b:2′,3′-d]arsoles

The dithienoarsole skeleton can be safely and easily constructed, by a method superior to conventional synthetic routes. The obtained dithienoarsoles, including a main-chain type polymer, show luminescence not only in solution but also in the solid state.

Color tuning of alternating conjugated polymers composed of pentaazaphenalene by modulating their unique electronic structures involving isolated-LUMOs

Pentaazaphenalene-containing polymers with unique conjugated systems were synthesized. Various colors can be observed from the polymer solutions.